arch/arm/boot/dts/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "TI AM335x EVM-SK";
  22         compatible = "ti,am335x-evmsk", "ti,am33xx";
  23
  24         cpus {
  25                 cpu@0 {
  26                         cpu0-supply = <&vdd1_reg>;
  27                 };
  28         };
  29
  30         memory@80000000 {
  31                 device_type = "memory";
  32                 reg = <0x80000000 0x10000000>; /* 256 MB */
  33         };
  34
  35         chosen {
  36                 stdout-path = &uart0;
  37         };
  38
  39         vbat: fixedregulator0 {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vbat";
  42                 regulator-min-microvolt = <5000000>;
  43                 regulator-max-microvolt = <5000000>;
  44                 regulator-boot-on;
  45         };
  46
  47         lis3_reg: fixedregulator1 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "lis3_reg";
  50                 regulator-boot-on;
  51         };
  52
  53         wl12xx_vmmc: fixedregulator2 {
  54                 pinctrl-names = "default";
  55                 pinctrl-0 = <&wl12xx_gpio>;
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "vwl1271";
  58                 regulator-min-microvolt = <1800000>;
  59                 regulator-max-microvolt = <1800000>;
  60                 gpio = <&gpio1 29 0>;
  61                 startup-delay-us = <70000>;
  62                 enable-active-high;
  63         };
  64
  65         vtt_fixed: fixedregulator3 {
  66                 compatible = "regulator-fixed";
  67                 regulator-name = "vtt";
  68                 regulator-min-microvolt = <1500000>;
  69                 regulator-max-microvolt = <1500000>;
  70                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  71                 regulator-always-on;
  72                 regulator-boot-on;
  73                 enable-active-high;
  74         };
  75
  76         /* TPS79518 */
  77         v1_8d_reg: fixedregulator-v1_8d {
  78                 compatible = "regulator-fixed";
  79                 regulator-name = "v1_8d";
  80                 vin-supply = <&vbat>;
  81                 regulator-min-microvolt = <1800000>;
  82                 regulator-max-microvolt = <1800000>;
  83         };
  84
  85         /* TPS78633 */
  86         v3_3d_reg: fixedregulator-v3_3d {
  87                 compatible = "regulator-fixed";
  88                 regulator-name = "v3_3d";
  89                 vin-supply = <&vbat>;
  90                 regulator-min-microvolt = <3300000>;
  91                 regulator-max-microvolt = <3300000>;
  92         };
  93
  94         leds {
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&user_leds_s0>;
  97
  98                 compatible = "gpio-leds";
  99
 100                 led1 {
 101                         label = "evmsk:green:usr0";
 102                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 103                         default-state = "off";
 104                 };
 105
 106                 led2 {
 107                         label = "evmsk:green:usr1";
 108                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 109                         default-state = "off";
 110                 };
 111
 112                 led3 {
 113                         label = "evmsk:green:mmc0";
 114                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 115                         linux,default-trigger = "mmc0";
 116                         default-state = "off";
 117                 };
 118
 119                 led4 {
 120                         label = "evmsk:green:heartbeat";
 121                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 122                         linux,default-trigger = "heartbeat";
 123                         default-state = "off";
 124                 };
 125         };
 126
 127         gpio_buttons: gpio_buttons0 {
 128                 compatible = "gpio-keys";
 129                 #address-cells = <1>;
 130                 #size-cells = <0>;
 131
 132                 switch1 {
 133                         label = "button0";
 134                         linux,code = <0x100>;
 135                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 136                 };
 137
 138                 switch2 {
 139                         label = "button1";
 140                         linux,code = <0x101>;
 141                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 142                 };
 143
 144                 switch3 {
 145                         label = "button2";
 146                         linux,code = <0x102>;
 147                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 148                         wakeup-source;
 149                 };
 150
 151                 switch4 {
 152                         label = "button3";
 153                         linux,code = <0x103>;
 154                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 155                 };
 156         };
 157
 158         backlight {
 159                 compatible = "pwm-backlight";
 160                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 161                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 162                 default-brightness-level = <8>;
 163         };
 164
 165         sound {
 166                 compatible = "simple-audio-card";
 167                 simple-audio-card,name = "AM335x-EVMSK";
 168                 simple-audio-card,widgets =
 169                         "Headphone", "Headphone Jack";
 170                 simple-audio-card,routing =
 171                         "Headphone Jack",       "HPLOUT",
 172                         "Headphone Jack",       "HPROUT";
 173                 simple-audio-card,format = "dsp_b";
 174                 simple-audio-card,bitclock-master = <&sound_master>;
 175                 simple-audio-card,frame-master = <&sound_master>;
 176                 simple-audio-card,bitclock-inversion;
 177
 178                 simple-audio-card,cpu {
 179                         sound-dai = <&mcasp1>;
 180                 };
 181
 182                 sound_master: simple-audio-card,codec {
 183                         sound-dai = <&tlv320aic3106>;
 184                         system-clock-frequency = <24000000>;
 185                 };
 186         };
 187
 188         panel {
 189                 compatible = "ti,tilcdc,panel";
 190                 pinctrl-names = "default", "sleep";
 191                 pinctrl-0 = <&lcd_pins_default>;
 192                 pinctrl-1 = <&lcd_pins_sleep>;
 193                 status = "okay";
 194                 panel-info {
 195                         ac-bias         = <255>;
 196                         ac-bias-intrpt  = <0>;
 197                         dma-burst-sz    = <16>;
 198                         bpp             = <32>;
 199                         fdd             = <0x80>;
 200                         sync-edge       = <0>;
 201                         sync-ctrl       = <1>;
 202                         raster-order    = <0>;
 203                         fifo-th         = <0>;
 204                 };
 205                 display-timings {
 206                         480x272 {
 207                                 hactive         = <480>;
 208                                 vactive         = <272>;
 209                                 hback-porch     = <43>;
 210                                 hfront-porch    = <8>;
 211                                 hsync-len       = <4>;
 212                                 vback-porch     = <12>;
 213                                 vfront-porch    = <4>;
 214                                 vsync-len       = <10>;
 215                                 clock-frequency = <9000000>;
 216                                 hsync-active    = <0>;
 217                                 vsync-active    = <0>;
 218                         };
 219                 };
 220         };
 221 };
 222
 223 &am33xx_pinmux {
 224         pinctrl-names = "default";
 225         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 226
 227         lcd_pins_default: lcd_pins_default {
 228                 pinctrl-single,pins = <
 229                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad8.lcd_data23 */
 230                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad9.lcd_data22 */
 231                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad10.lcd_data21 */
 232                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad11.lcd_data20 */
 233                         AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad12.lcd_data19 */
 234                         AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad13.lcd_data18 */
 235                         AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad14.lcd_data17 */
 236                         AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)     /* gpmc_ad15.lcd_data16 */
 237                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data0.lcd_data0 */
 238                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data1.lcd_data1 */
 239                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data2.lcd_data2 */
 240                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)     /* lcd_data3.lcd_data3 */
 241                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data4.lcd_data4 */
 242                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data5.lcd_data5 */
 243                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data6.lcd_data6 */
 244                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data7.lcd_data7 */
 245                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data8.lcd_data8 */
 246                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data9.lcd_data9 */
 247                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data10.lcd_data10 */
 248                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data11.lcd_data11 */
 249                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data12.lcd_data12 */
 250                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data13.lcd_data13 */
 251                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data14.lcd_data14 */
 252                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data15.lcd_data15 */
 253                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)     /* lcd_vsync.lcd_vsync */
 254                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)     /* lcd_hsync.lcd_hsync */
 255                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)     /* lcd_pclk.lcd_pclk */
 256                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 257                 >;
 258         };
 259
 260         lcd_pins_sleep: lcd_pins_sleep {
 261                 pinctrl-single,pins = <
 262                         AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad8.lcd_data23 */
 263                         AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad9.lcd_data22 */
 264                         AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad10.lcd_data21 */
 265                         AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad11.lcd_data20 */
 266                         AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad12.lcd_data19 */
 267                         AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad13.lcd_data18 */
 268                         AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad14.lcd_data17 */
 269                         AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.lcd_data16 */
 270                         AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)   /* lcd_data0.lcd_data0 */
 271                         AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)   /* lcd_data1.lcd_data1 */
 272                         AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)   /* lcd_data2.lcd_data2 */
 273                         AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)   /* lcd_data3.lcd_data3 */
 274                         AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)   /* lcd_data4.lcd_data4 */
 275                         AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)   /* lcd_data5.lcd_data5 */
 276                         AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)   /* lcd_data6.lcd_data6 */
 277                         AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)   /* lcd_data7.lcd_data7 */
 278                         AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)   /* lcd_data8.lcd_data8 */
 279                         AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)   /* lcd_data9.lcd_data9 */
 280                         AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)   /* lcd_data10.lcd_data10 */
 281                         AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)   /* lcd_data11.lcd_data11 */
 282                         AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)   /* lcd_data12.lcd_data12 */
 283                         AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)   /* lcd_data13.lcd_data13 */
 284                         AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)   /* lcd_data14.lcd_data14 */
 285                         AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)   /* lcd_data15.lcd_data15 */
 286                         AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_vsync.lcd_vsync */
 287                         AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_hsync.lcd_hsync */
 288                         AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_pclk.lcd_pclk */
 289                         AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* lcd_ac_bias_en.lcd_ac_bias_en */
 290                 >;
 291         };
 292
 293
 294         user_leds_s0: user_leds_s0 {
 295                 pinctrl-single,pins = <
 296                         AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad4.gpio1_4 */
 297                         AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad5.gpio1_5 */
 298                         AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad6.gpio1_6 */
 299                         AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_ad7.gpio1_7 */
 300                 >;
 301         };
 302
 303         gpio_keys_s0: gpio_keys_s0 {
 304                 pinctrl-single,pins = <
 305                         AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_oen_ren.gpio2_3 */
 306                         AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_advn_ale.gpio2_2 */
 307                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_wait0.gpio0_30 */
 308                         AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ben0_cle.gpio2_5 */
 309                 >;
 310         };
 311
 312         i2c0_pins: pinmux_i2c0_pins {
 313                 pinctrl-single,pins = <
 314                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_sda.i2c0_sda */
 315                         AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_scl.i2c0_scl */
 316                 >;
 317         };
 318
 319         uart0_pins: pinmux_uart0_pins {
 320                 pinctrl-single,pins = <
 321                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 322                         AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart0_txd.uart0_txd */
 323                 >;
 324         };
 325
 326         clkout2_pin: pinmux_clkout2_pin {
 327                 pinctrl-single,pins = <
 328                         AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)    /* xdma_event_intr1.clkout2 */
 329                 >;
 330         };
 331
 332         ecap2_pins: backlight_pins {
 333                 pinctrl-single,pins = <
 334                         AM33XX_IOPAD(0x99c, MUX_MODE4)  /* mcasp0_ahclkr.ecap2_in_pwm2_out */
 335                 >;
 336         };
 337
 338         cpsw_default: cpsw_default {
 339                 pinctrl-single,pins = <
 340                         /* Slave 1 */
 341                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txen.rgmii1_tctl */
 342                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxdv.rgmii1_rctl */
 343                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd3.rgmii1_td3 */
 344                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd2.rgmii1_td2 */
 345                         AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_td1 */
 346                         AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_td0 */
 347                         AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txclk.rgmii1_tclk */
 348                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxclk.rgmii1_rclk */
 349                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd3.rgmii1_rd3 */
 350                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd2.rgmii1_rd2 */
 351                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rd1 */
 352                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rd0 */
 353
 354                         /* Slave 2 */
 355                         AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a0.rgmii2_tctl */
 356                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a1.rgmii2_rctl */
 357                         AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a2.rgmii2_td3 */
 358                         AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a3.rgmii2_td2 */
 359                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a4.rgmii2_td1 */
 360                         AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a5.rgmii2_td0 */
 361                         AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a6.rgmii2_tclk */
 362                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a7.rgmii2_rclk */
 363                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a8.rgmii2_rd3 */
 364                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a9.rgmii2_rd2 */
 365                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a10.rgmii2_rd1 */
 366                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a11.rgmii2_rd0 */
 367                 >;
 368         };
 369
 370         cpsw_sleep: cpsw_sleep {
 371                 pinctrl-single,pins = <
 372                         /* Slave 1 reset value */
 373                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 374                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 375                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 376                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 377                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 378                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 379                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 380                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 381                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 382                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 383                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 384                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 385
 386                         /* Slave 2 reset value*/
 387                         AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
 388                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
 389                         AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
 390                         AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 391                         AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
 392                         AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 393                         AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 394                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 395                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 396                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 397                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 398                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 399                 >;
 400         };
 401
 402         davinci_mdio_default: davinci_mdio_default {
 403                 pinctrl-single,pins = <
 404                         /* MDIO */
 405                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 406                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 407                 >;
 408         };
 409
 410         davinci_mdio_sleep: davinci_mdio_sleep {
 411                 pinctrl-single,pins = <
 412                         /* MDIO reset value */
 413                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 414                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 415                 >;
 416         };
 417
 418         mmc1_pins: pinmux_mmc1_pins {
 419                 pinctrl-single,pins = <
 420                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 421                 >;
 422         };
 423
 424         mcasp1_pins: mcasp1_pins {
 425                 pinctrl-single,pins = <
 426                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 427                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 428                         AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 429                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 430                 >;
 431         };
 432
 433         mcasp1_pins_sleep: mcasp1_pins_sleep {
 434                 pinctrl-single,pins = <
 435                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 436                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 437                         AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 438                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 439                 >;
 440         };
 441
 442         mmc2_pins: pinmux_mmc2_pins {
 443                 pinctrl-single,pins = <
 444                         AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 445                         AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 446                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 447                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 448                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 449                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 450                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 451                 >;
 452         };
 453
 454         wl12xx_gpio: pinmux_wl12xx_gpio {
 455                 pinctrl-single,pins = <
 456                         AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 457                 >;
 458         };
 459 };
 460
 461 &uart0 {
 462         pinctrl-names = "default";
 463         pinctrl-0 = <&uart0_pins>;
 464
 465         status = "okay";
 466 };
 467
 468 &i2c0 {
 469         pinctrl-names = "default";
 470         pinctrl-0 = <&i2c0_pins>;
 471
 472         status = "okay";
 473         clock-frequency = <400000>;
 474
 475         tps: tps@2d {
 476                 reg = <0x2d>;
 477         };
 478
 479         lis331dlh: lis331dlh@18 {
 480                 compatible = "st,lis331dlh", "st,lis3lv02d";
 481                 reg = <0x18>;
 482                 Vdd-supply = <&lis3_reg>;
 483                 Vdd_IO-supply = <&lis3_reg>;
 484
 485                 st,click-single-x;
 486                 st,click-single-y;
 487                 st,click-single-z;
 488                 st,click-thresh-x = <10>;
 489                 st,click-thresh-y = <10>;
 490                 st,click-thresh-z = <10>;
 491                 st,irq1-click;
 492                 st,irq2-click;
 493                 st,wakeup-x-lo;
 494                 st,wakeup-x-hi;
 495                 st,wakeup-y-lo;
 496                 st,wakeup-y-hi;
 497                 st,wakeup-z-lo;
 498                 st,wakeup-z-hi;
 499                 st,min-limit-x = <120>;
 500                 st,min-limit-y = <120>;
 501                 st,min-limit-z = <140>;
 502                 st,max-limit-x = <550>;
 503                 st,max-limit-y = <550>;
 504                 st,max-limit-z = <750>;
 505         };
 506
 507         tlv320aic3106: tlv320aic3106@1b {
 508                 #sound-dai-cells = <0>;
 509                 compatible = "ti,tlv320aic3106";
 510                 reg = <0x1b>;
 511                 status = "okay";
 512
 513                 /* Regulators */
 514                 AVDD-supply = <&v3_3d_reg>;
 515                 IOVDD-supply = <&v3_3d_reg>;
 516                 DRVDD-supply = <&v3_3d_reg>;
 517                 DVDD-supply = <&v1_8d_reg>;
 518         };
 519 };
 520
 521 &usb {
 522         status = "okay";
 523 };
 524
 525 &usb_ctrl_mod {
 526         status = "okay";
 527 };
 528
 529 &usb0_phy {
 530         status = "okay";
 531 };
 532
 533 &usb1_phy {
 534         status = "okay";
 535 };
 536
 537 &usb0 {
 538         status = "okay";
 539 };
 540
 541 &usb1 {
 542         status = "okay";
 543         dr_mode = "host";
 544 };
 545
 546 &cppi41dma  {
 547         status = "okay";
 548 };
 549
 550 &epwmss2 {
 551         status = "okay";
 552
 553         ecap2: ecap@48304100 {
 554                 status = "okay";
 555                 pinctrl-names = "default";
 556                 pinctrl-0 = <&ecap2_pins>;
 557         };
 558 };
 559
 560 #include "tps65910.dtsi"
 561
 562 &tps {
 563         vcc1-supply = <&vbat>;
 564         vcc2-supply = <&vbat>;
 565         vcc3-supply = <&vbat>;
 566         vcc4-supply = <&vbat>;
 567         vcc5-supply = <&vbat>;
 568         vcc6-supply = <&vbat>;
 569         vcc7-supply = <&vbat>;
 570         vccio-supply = <&vbat>;
 571
 572         regulators {
 573                 vrtc_reg: regulator@0 {
 574                         regulator-always-on;
 575                 };
 576
 577                 vio_reg: regulator@1 {
 578                         regulator-always-on;
 579                 };
 580
 581                 vdd1_reg: regulator@2 {
 582                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 583                         regulator-name = "vdd_mpu";
 584                         regulator-min-microvolt = <912500>;
 585                         regulator-max-microvolt = <1351500>;
 586                         regulator-boot-on;
 587                         regulator-always-on;
 588                 };
 589
 590                 vdd2_reg: regulator@3 {
 591                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 592                         regulator-name = "vdd_core";
 593                         regulator-min-microvolt = <912500>;
 594                         regulator-max-microvolt = <1150000>;
 595                         regulator-boot-on;
 596                         regulator-always-on;
 597                 };
 598
 599                 vdd3_reg: regulator@4 {
 600                         regulator-always-on;
 601                 };
 602
 603                 vdig1_reg: regulator@5 {
 604                         regulator-always-on;
 605                 };
 606
 607                 vdig2_reg: regulator@6 {
 608                         regulator-always-on;
 609                 };
 610
 611                 vpll_reg: regulator@7 {
 612                         regulator-always-on;
 613                 };
 614
 615                 vdac_reg: regulator@8 {
 616                         regulator-always-on;
 617                 };
 618
 619                 vaux1_reg: regulator@9 {
 620                         regulator-always-on;
 621                 };
 622
 623                 vaux2_reg: regulator@10 {
 624                         regulator-always-on;
 625                 };
 626
 627                 vaux33_reg: regulator@11 {
 628                         regulator-always-on;
 629                 };
 630
 631                 vmmc_reg: regulator@12 {
 632                         regulator-min-microvolt = <1800000>;
 633                         regulator-max-microvolt = <3300000>;
 634                         regulator-always-on;
 635                 };
 636         };
 637 };
 638
 639 &mac {
 640         pinctrl-names = "default", "sleep";
 641         pinctrl-0 = <&cpsw_default>;
 642         pinctrl-1 = <&cpsw_sleep>;
 643         dual_emac = <1>;
 644         status = "okay";
 645 };
 646
 647 &davinci_mdio {
 648         pinctrl-names = "default", "sleep";
 649         pinctrl-0 = <&davinci_mdio_default>;
 650         pinctrl-1 = <&davinci_mdio_sleep>;
 651         status = "okay";
 652 };
 653
 654 &cpsw_emac0 {
 655         phy_id = <&davinci_mdio>, <0>;
 656         phy-mode = "rgmii-txid";
 657         dual_emac_res_vlan = <1>;
 658 };
 659
 660 &cpsw_emac1 {
 661         phy_id = <&davinci_mdio>, <1>;
 662         phy-mode = "rgmii-txid";
 663         dual_emac_res_vlan = <2>;
 664 };
 665
 666 &mmc1 {
 667         status = "okay";
 668         vmmc-supply = <&vmmc_reg>;
 669         bus-width = <4>;
 670         pinctrl-names = "default";
 671         pinctrl-0 = <&mmc1_pins>;
 672         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 673 };
 674
 675 &sham {
 676         status = "okay";
 677 };
 678
 679 &aes {
 680         status = "okay";
 681 };
 682
 683 &gpio0 {
 684         ti,no-reset-on-init;
 685 };
 686
 687 &mmc2 {
 688         status = "okay";
 689         vmmc-supply = <&wl12xx_vmmc>;
 690         ti,non-removable;
 691         bus-width = <4>;
 692         cap-power-off-card;
 693         keep-power-in-suspend;
 694         pinctrl-names = "default";
 695         pinctrl-0 = <&mmc2_pins>;
 696
 697         #address-cells = <1>;
 698         #size-cells = <0>;
 699         wlcore: wlcore@2 {
 700                 compatible = "ti,wl1271";
 701                 reg = <2>;
 702                 interrupt-parent = <&gpio0>;
 703                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
 704                 ref-clock-frequency = <38400000>;
 705         };
 706 };
 707
 708 &mcasp1 {
 709         #sound-dai-cells = <0>;
 710         pinctrl-names = "default", "sleep";
 711         pinctrl-0 = <&mcasp1_pins>;
 712         pinctrl-1 = <&mcasp1_pins_sleep>;
 713
 714         status = "okay";
 715
 716         op-mode = <0>;          /* MCASP_IIS_MODE */
 717         tdm-slots = <2>;
 718         /* 4 serializers */
 719         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 720                 0 0 1 2
 721         >;
 722         tx-num-evt = <32>;
 723         rx-num-evt = <32>;
 724 };
 725
 726 &tscadc {
 727         status = "okay";
 728         tsc {
 729                 ti,wires = <4>;
 730                 ti,x-plate-resistance = <200>;
 731                 ti,coordinate-readouts = <5>;
 732                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 733         };
 734 };
 735
 736 &lcdc {
 737         status = "okay";
 738
 739         blue-and-red-wiring = "crossed";
 740 };
 741
 742 &rtc {
 743         clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
 744         clock-names = "ext-clk", "int-clk";
 745 };