GNU Linux-libre 4.19.264-gnu1
[releases.git] / arch / arm / boot / dts / imx53-smd.dts
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2011 Freescale Semiconductor, Inc.
4 // Copyright 2011 Linaro Ltd.
5
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
8 #include "imx53.dtsi"
9
10 / {
11         model = "Freescale i.MX53 Smart Mobile Reference Design Board";
12         compatible = "fsl,imx53-smd", "fsl,imx53";
13
14         memory@70000000 {
15                 device_type = "memory";
16                 reg = <0x70000000 0x40000000>;
17         };
18
19         gpio-keys {
20                 compatible = "gpio-keys";
21
22                 volume-up {
23                         label = "Volume Up";
24                         gpios = <&gpio2 14 0>;
25                         linux,code = <KEY_VOLUMEUP>;
26                 };
27
28                 volume-down {
29                         label = "Volume Down";
30                         gpios = <&gpio2 15 0>;
31                         linux,code = <KEY_VOLUMEDOWN>;
32                 };
33         };
34 };
35
36 &esdhc1 {
37         pinctrl-names = "default";
38         pinctrl-0 = <&pinctrl_esdhc1>;
39         cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
40         wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
41         status = "okay";
42 };
43
44 &esdhc2 {
45         pinctrl-names = "default";
46         pinctrl-0 = <&pinctrl_esdhc2>;
47         non-removable;
48         status = "okay";
49 };
50
51 &uart3 {
52         pinctrl-names = "default";
53         pinctrl-0 = <&pinctrl_uart3>;
54         uart-has-rtscts;
55         status = "okay";
56 };
57
58 &ecspi1 {
59         pinctrl-names = "default";
60         pinctrl-0 = <&pinctrl_ecspi1>;
61         cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
62         status = "okay";
63
64         zigbee: mc1323@0 {
65                 compatible = "fsl,mc1323";
66                 spi-max-frequency = <8000000>;
67                 reg = <0>;
68         };
69
70         flash: m25p32@1 {
71                 #address-cells = <1>;
72                 #size-cells = <1>;
73                 compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
74                 spi-max-frequency = <20000000>;
75                 reg = <1>;
76
77                 partition@0 {
78                         label = "U-Boot";
79                         reg = <0x0 0x40000>;
80                         read-only;
81                 };
82
83                 partition@40000 {
84                         label = "Kernel";
85                         reg = <0x40000 0x3c0000>;
86                 };
87         };
88 };
89
90 &esdhc3 {
91         pinctrl-names = "default";
92         pinctrl-0 = <&pinctrl_esdhc3>;
93         non-removable;
94         status = "okay";
95 };
96
97 &iomuxc {
98         pinctrl-names = "default";
99         pinctrl-0 = <&pinctrl_hog>;
100
101         imx53-smd {
102                 pinctrl_hog: hoggrp {
103                         fsl,pins = <
104                                 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
105                                 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
106                                 MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
107                                 MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
108                                 MX53_PAD_EIM_D19__GPIO3_19     0x80000000
109                                 MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
110                                 MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
111                         >;
112                 };
113
114                 pinctrl_ecspi1: ecspi1grp {
115                         fsl,pins = <
116                                 MX53_PAD_EIM_D16__ECSPI1_SCLK           0x80000000
117                                 MX53_PAD_EIM_D17__ECSPI1_MISO           0x80000000
118                                 MX53_PAD_EIM_D18__ECSPI1_MOSI           0x80000000
119                         >;
120                 };
121
122                 pinctrl_esdhc1: esdhc1grp {
123                         fsl,pins = <
124                                 MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
125                                 MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
126                                 MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
127                                 MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
128                                 MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
129                                 MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
130                         >;
131                 };
132
133                 pinctrl_esdhc2: esdhc2grp {
134                         fsl,pins = <
135                                 MX53_PAD_SD2_CMD__ESDHC2_CMD            0x1d5
136                                 MX53_PAD_SD2_CLK__ESDHC2_CLK            0x1d5
137                                 MX53_PAD_SD2_DATA0__ESDHC2_DAT0         0x1d5
138                                 MX53_PAD_SD2_DATA1__ESDHC2_DAT1         0x1d5
139                                 MX53_PAD_SD2_DATA2__ESDHC2_DAT2         0x1d5
140                                 MX53_PAD_SD2_DATA3__ESDHC2_DAT3         0x1d5
141                         >;
142                 };
143
144                 pinctrl_esdhc3: esdhc3grp {
145                         fsl,pins = <
146                                 MX53_PAD_PATA_DATA8__ESDHC3_DAT0        0x1d5
147                                 MX53_PAD_PATA_DATA9__ESDHC3_DAT1        0x1d5
148                                 MX53_PAD_PATA_DATA10__ESDHC3_DAT2       0x1d5
149                                 MX53_PAD_PATA_DATA11__ESDHC3_DAT3       0x1d5
150                                 MX53_PAD_PATA_DATA0__ESDHC3_DAT4        0x1d5
151                                 MX53_PAD_PATA_DATA1__ESDHC3_DAT5        0x1d5
152                                 MX53_PAD_PATA_DATA2__ESDHC3_DAT6        0x1d5
153                                 MX53_PAD_PATA_DATA3__ESDHC3_DAT7        0x1d5
154                                 MX53_PAD_PATA_RESET_B__ESDHC3_CMD       0x1d5
155                                 MX53_PAD_PATA_IORDY__ESDHC3_CLK         0x1d5
156                         >;
157                 };
158
159                 pinctrl_fec: fecgrp {
160                         fsl,pins = <
161                                 MX53_PAD_FEC_MDC__FEC_MDC               0x80000000
162                                 MX53_PAD_FEC_MDIO__FEC_MDIO             0x80000000
163                                 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x80000000
164                                 MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x80000000
165                                 MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x80000000
166                                 MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x80000000
167                                 MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x80000000
168                                 MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x80000000
169                                 MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x80000000
170                                 MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x80000000
171                         >;
172                 };
173
174                 pinctrl_i2c1: i2c1grp {
175                         fsl,pins = <
176                                 MX53_PAD_CSI0_DAT8__I2C1_SDA            0xc0000000
177                                 MX53_PAD_CSI0_DAT9__I2C1_SCL            0xc0000000
178                         >;
179                 };
180
181                 pinctrl_i2c2: i2c2grp {
182                         fsl,pins = <
183                                 MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
184                                 MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
185                         >;
186                 };
187
188                 pinctrl_uart1: uart1grp {
189                         fsl,pins = <
190                                 MX53_PAD_CSI0_DAT10__UART1_TXD_MUX      0x1e4
191                                 MX53_PAD_CSI0_DAT11__UART1_RXD_MUX      0x1e4
192                         >;
193                 };
194
195                 pinctrl_uart2: uart2grp {
196                         fsl,pins = <
197                                 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX  0x1e4
198                                 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX      0x1e4
199                         >;
200                 };
201
202                 pinctrl_uart3: uart3grp {
203                         fsl,pins = <
204                                 MX53_PAD_PATA_CS_0__UART3_TXD_MUX       0x1e4
205                                 MX53_PAD_PATA_CS_1__UART3_RXD_MUX       0x1e4
206                                 MX53_PAD_PATA_DA_1__UART3_CTS           0x1e4
207                                 MX53_PAD_PATA_DA_2__UART3_RTS           0x1e4
208                         >;
209                 };
210         };
211 };
212
213 &uart1 {
214         pinctrl-names = "default";
215         pinctrl-0 = <&pinctrl_uart1>;
216         status = "okay";
217 };
218
219 &uart2 {
220         pinctrl-names = "default";
221         pinctrl-0 = <&pinctrl_uart2>;
222         status = "okay";
223 };
224
225 &i2c2 {
226         pinctrl-names = "default";
227         pinctrl-0 = <&pinctrl_i2c2>;
228         status = "okay";
229
230         codec: sgtl5000@a {
231                 compatible = "fsl,sgtl5000";
232                 reg = <0x0a>;
233         };
234
235         magnetometer: mag3110@e {
236                 compatible = "fsl,mag3110";
237                 reg = <0x0e>;
238         };
239
240         touchkey: mpr121@5a {
241                 compatible = "fsl,mpr121";
242                 reg = <0x5a>;
243         };
244 };
245
246 &i2c1 {
247         pinctrl-names = "default";
248         pinctrl-0 = <&pinctrl_i2c1>;
249         status = "okay";
250
251         accelerometer: mma8450@1c {
252                 compatible = "fsl,mma8450";
253                 reg = <0x1c>;
254         };
255
256         camera: ov5642@3c {
257                 compatible = "ovti,ov5642";
258                 reg = <0x3c>;
259         };
260
261         pmic: dialog@48 {
262                 compatible = "dlg,da9053", "dlg,da9052";
263                 reg = <0x48>;
264         };
265 };
266
267 &fec {
268         pinctrl-names = "default";
269         pinctrl-0 = <&pinctrl_fec>;
270         phy-mode = "rmii";
271         phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
272         status = "okay";
273 };