GNU Linux-libre 4.19.264-gnu1
[releases.git] / arch / arm / boot / dts / kirkwood-goflexnet.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3
4 #include "kirkwood.dtsi"
5 #include "kirkwood-6281.dtsi"
6
7 / {
8         model = "Seagate GoFlex Net";
9         compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11         memory {
12                 device_type = "memory";
13                 reg = <0x00000000 0x8000000>;
14         };
15
16         chosen {
17                 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
18                 stdout-path = &uart0;
19         };
20
21         ocp@f1000000 {
22                 pinctrl: pin-controller@10000 {
23                         pmx_usb_power_enable: pmx-usb-power-enable {
24                                 marvell,pins = "mpp29";
25                                 marvell,function = "gpio";
26                         };
27                         pmx_led_right_cap_0: pmx-led_right_cap_0 {
28                                 marvell,pins = "mpp38";
29                                 marvell,function = "gpio";
30                         };
31                         pmx_led_right_cap_1: pmx-led_right_cap_1 {
32                                 marvell,pins = "mpp39";
33                                 marvell,function = "gpio";
34                         };
35                         pmx_led_right_cap_2: pmx-led_right_cap_2 {
36                                 marvell,pins = "mpp40";
37                                 marvell,function = "gpio";
38                         };
39                         pmx_led_right_cap_3: pmx-led_right_cap_3 {
40                                 marvell,pins = "mpp41";
41                                 marvell,function = "gpio";
42                         };
43                         pmx_led_left_cap_0: pmx-led_left_cap_0 {
44                                 marvell,pins = "mpp42";
45                                 marvell,function = "gpio";
46                         };
47                         pmx_led_left_cap_1: pmx-led_left_cap_1 {
48                                 marvell,pins = "mpp43";
49                                 marvell,function = "gpio";
50                         };
51                         pmx_led_left_cap_2: pmx-led_left_cap_2 {
52                                 marvell,pins = "mpp44";
53                                 marvell,function = "gpio";
54                         };
55                         pmx_led_left_cap_3: pmx-led_left_cap_3 {
56                                 marvell,pins = "mpp45";
57                                 marvell,function = "gpio";
58                         };
59                         pmx_led_green: pmx-led_green {
60                                 marvell,pins = "mpp46";
61                                 marvell,function = "gpio";
62                         };
63                         pmx_led_orange: pmx-led_orange {
64                                 marvell,pins = "mpp47";
65                                 marvell,function = "gpio";
66                         };
67                 };
68                 serial@12000 {
69                         status = "ok";
70                 };
71
72                 sata@80000 {
73                         status = "okay";
74                         nr-ports = <2>;
75                 };
76
77         };
78         gpio-leds {
79                 compatible = "gpio-leds";
80                 pinctrl-0 = < &pmx_led_orange
81                               &pmx_led_left_cap_0 &pmx_led_left_cap_1
82                               &pmx_led_left_cap_2 &pmx_led_left_cap_3
83                               &pmx_led_right_cap_0 &pmx_led_right_cap_1
84                               &pmx_led_right_cap_2 &pmx_led_right_cap_3
85                             >;
86                 pinctrl-names = "default";
87
88                 health {
89                         label = "status:green:health";
90                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
91                         default-state = "keep";
92                 };
93                 fault {
94                         label = "status:orange:fault";
95                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
96                 };
97                 left0 {
98                         label = "status:white:left0";
99                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
100                 };
101                 left1 {
102                         label = "status:white:left1";
103                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
104                 };
105                 left2 {
106                         label = "status:white:left2";
107                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
108                 };
109                 left3 {
110                         label = "status:white:left3";
111                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
112                 };
113                 right0 {
114                         label = "status:white:right0";
115                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
116                 };
117                 right1 {
118                         label = "status:white:right1";
119                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
120                 };
121                 right2 {
122                         label = "status:white:right2";
123                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
124                 };
125                 right3 {
126                         label = "status:white:right3";
127                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
128                 };
129         };
130         regulators {
131                 compatible = "simple-bus";
132                 #address-cells = <1>;
133                 #size-cells = <0>;
134                 pinctrl-0 = <&pmx_usb_power_enable>;
135                 pinctrl-names = "default";
136
137                 usb_power: regulator@1 {
138                         compatible = "regulator-fixed";
139                         reg = <1>;
140                         regulator-name = "USB Power";
141                         regulator-min-microvolt = <5000000>;
142                         regulator-max-microvolt = <5000000>;
143                         enable-active-high;
144                         regulator-always-on;
145                         regulator-boot-on;
146                         gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
147                 };
148         };
149 };
150
151 &nand {
152         chip-delay = <40>;
153         status = "okay";
154
155         partition@0 {
156                 label = "u-boot";
157                 reg = <0x0000000 0x100000>;
158                 read-only;
159         };
160
161         partition@100000 {
162                 label = "uImage";
163                 reg = <0x0100000 0x400000>;
164         };
165
166         partition@500000 {
167                 label = "pogoplug";
168                 reg = <0x0500000 0x2000000>;
169         };
170
171         partition@2500000 {
172                 label = "root";
173                 reg = <0x02500000 0xd800000>;
174         };
175 };
176
177 &mdio {
178         status = "okay";
179
180         ethphy0: ethernet-phy@0 {
181                 reg = <0>;
182         };
183 };
184
185 &eth0 {
186         status = "okay";
187         ethernet0-port@0 {
188                 phy-handle = <&ethphy0>;
189         };
190 };