arch/arm/boot/dts/lpc32xx.dtsi

   1 /*
   2  * NXP LPC32xx SoC
   3  *
   4  * Copyright 2012 Roland Stigge <stigge@antcom.de>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 #include "skeleton.dtsi"
  15
  16 #include <dt-bindings/clock/lpc32xx-clock.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18
  19 / {
  20         compatible = "nxp,lpc3220";
  21         interrupt-parent = <&mic>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 cpu@0 {
  28                         compatible = "arm,arm926ej-s";
  29                         device_type = "cpu";
  30                         reg = <0x0>;
  31                 };
  32         };
  33
  34         clocks {
  35                 xtal_32k: xtal_32k {
  36                         compatible = "fixed-clock";
  37                         #clock-cells = <0>;
  38                         clock-frequency = <32768>;
  39                         clock-output-names = "xtal_32k";
  40                 };
  41
  42                 xtal: xtal {
  43                         compatible = "fixed-clock";
  44                         #clock-cells = <0>;
  45                         clock-frequency = <13000000>;
  46                         clock-output-names = "xtal";
  47                 };
  48         };
  49
  50         ahb {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 compatible = "simple-bus";
  54                 ranges = <0x00000000 0x00000000 0x10000000>,
  55                          <0x20000000 0x20000000 0x30000000>,
  56                          <0xe0000000 0xe0000000 0x04000000>;
  57
  58                 iram: sram@08000000 {
  59                         compatible = "mmio-sram";
  60                         reg = <0x08000000 0x20000>;
  61
  62                         #address-cells = <1>;
  63                         #size-cells = <1>;
  64                         ranges = <0x00000000 0x08000000 0x20000>;
  65                 };
  66
  67                 /*
  68                  * Enable either SLC or MLC
  69                  */
  70                 slc: flash@20020000 {
  71                         compatible = "nxp,lpc3220-slc";
  72                         reg = <0x20020000 0x1000>;
  73                         clocks = <&clk LPC32XX_CLK_SLC>;
  74                         status = "disabled";
  75                 };
  76
  77                 mlc: flash@200a8000 {
  78                         compatible = "nxp,lpc3220-mlc";
  79                         reg = <0x200a8000 0x11000>;
  80                         interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
  81                         clocks = <&clk LPC32XX_CLK_MLC>;
  82                         status = "disabled";
  83                 };
  84
  85                 dma: dma@31000000 {
  86                         compatible = "arm,pl080", "arm,primecell";
  87                         reg = <0x31000000 0x1000>;
  88                         interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
  89                         clocks = <&clk LPC32XX_CLK_DMA>;
  90                         clock-names = "apb_pclk";
  91                 };
  92
  93                 usb {
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96                         compatible = "simple-bus";
  97                         ranges = <0x0 0x31020000 0x00001000>;
  98
  99                         /*
 100                          * Enable either ohci or usbd (gadget)!
 101                          */
 102                         ohci: ohci@0 {
 103                                 compatible = "nxp,ohci-nxp", "usb-ohci";
 104                                 reg = <0x0 0x300>;
 105                                 interrupt-parent = <&sic1>;
 106                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 107                                 clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
 108                                 status = "disabled";
 109                         };
 110
 111                         usbd: usbd@0 {
 112                                 compatible = "nxp,lpc3220-udc";
 113                                 reg = <0x0 0x300>;
 114                                 interrupt-parent = <&sic1>;
 115                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
 116                                              <30 IRQ_TYPE_LEVEL_HIGH>,
 117                                              <28 IRQ_TYPE_LEVEL_HIGH>,
 118                                              <26 IRQ_TYPE_LEVEL_LOW>;
 119                                 clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
 120                                 status = "disabled";
 121                         };
 122
 123                         i2cusb: i2c@300 {
 124                                 compatible = "nxp,pnx-i2c";
 125                                 reg = <0x300 0x100>;
 126                                 interrupt-parent = <&sic1>;
 127                                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 128                                 clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
 129                                 #address-cells = <1>;
 130                                 #size-cells = <0>;
 131                                 pnx,timeout = <0x64>;
 132                         };
 133
 134                         usbclk: clock-controller@f00 {
 135                                 compatible = "nxp,lpc3220-usb-clk";
 136                                 reg = <0xf00 0x100>;
 137                                 #clock-cells = <1>;
 138                         };
 139                 };
 140
 141                 clcd: clcd@31040000 {
 142                         compatible = "arm,pl111", "arm,primecell";
 143                         reg = <0x31040000 0x1000>;
 144                         interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
 145                         clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
 146                         clock-names = "clcdclk", "apb_pclk";
 147                         status = "disabled";
 148                 };
 149
 150                 mac: ethernet@31060000 {
 151                         compatible = "nxp,lpc-eth";
 152                         reg = <0x31060000 0x1000>;
 153                         interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 154                         clocks = <&clk LPC32XX_CLK_MAC>;
 155                 };
 156
 157                 emc: memory-controller@31080000 {
 158                         compatible = "arm,pl175", "arm,primecell";
 159                         reg = <0x31080000 0x1000>;
 160                         clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
 161                         clock-names = "mpmcclk", "apb_pclk";
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164
 165                         ranges = <0 0xe0000000 0x01000000>,
 166                                  <1 0xe1000000 0x01000000>,
 167                                  <2 0xe2000000 0x01000000>,
 168                                  <3 0xe3000000 0x01000000>;
 169                         status = "disabled";
 170                 };
 171
 172                 apb {
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         compatible = "simple-bus";
 176                         ranges = <0x20000000 0x20000000 0x30000000>;
 177
 178                         /*
 179                          * ssp0 and spi1 are shared pins;
 180                          * enable one in your board dts, as needed.
 181                          */
 182                         ssp0: spi@20084000 {
 183                                 compatible = "arm,pl022", "arm,primecell";
 184                                 reg = <0x20084000 0x1000>;
 185                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 186                                 clocks = <&clk LPC32XX_CLK_SSP0>;
 187                                 clock-names = "apb_pclk";
 188                                 status = "disabled";
 189                         };
 190
 191                         spi1: spi@20088000 {
 192                                 compatible = "nxp,lpc3220-spi";
 193                                 reg = <0x20088000 0x1000>;
 194                                 clocks = <&clk LPC32XX_CLK_SPI1>;
 195                                 status = "disabled";
 196                         };
 197
 198                         /*
 199                          * ssp1 and spi2 are shared pins;
 200                          * enable one in your board dts, as needed.
 201                          */
 202                         ssp1: spi@2008c000 {
 203                                 compatible = "arm,pl022", "arm,primecell";
 204                                 reg = <0x2008c000 0x1000>;
 205                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 206                                 clocks = <&clk LPC32XX_CLK_SSP1>;
 207                                 clock-names = "apb_pclk";
 208                                 status = "disabled";
 209                         };
 210
 211                         spi2: spi@20090000 {
 212                                 compatible = "nxp,lpc3220-spi";
 213                                 reg = <0x20090000 0x1000>;
 214                                 clocks = <&clk LPC32XX_CLK_SPI2>;
 215                                 status = "disabled";
 216                         };
 217
 218                         i2s0: i2s@20094000 {
 219                                 compatible = "nxp,lpc3220-i2s";
 220                                 reg = <0x20094000 0x1000>;
 221                         };
 222
 223                         sd: sd@20098000 {
 224                                 compatible = "arm,pl18x", "arm,primecell";
 225                                 reg = <0x20098000 0x1000>;
 226                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 227                                              <13 IRQ_TYPE_LEVEL_HIGH>;
 228                                 clocks = <&clk LPC32XX_CLK_SD>;
 229                                 clock-names = "apb_pclk";
 230                                 status = "disabled";
 231                         };
 232
 233                         i2s1: i2s@2009c000 {
 234                                 compatible = "nxp,lpc3220-i2s";
 235                                 reg = <0x2009C000 0x1000>;
 236                         };
 237
 238                         /* UART5 first since it is the default console, ttyS0 */
 239                         uart5: serial@40090000 {
 240                                 /* actually, ns16550a w/ 64 byte fifos! */
 241                                 compatible = "nxp,lpc3220-uart";
 242                                 reg = <0x40090000 0x1000>;
 243                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 244                                 reg-shift = <2>;
 245                                 clocks = <&clk LPC32XX_CLK_UART5>;
 246                                 status = "disabled";
 247                         };
 248
 249                         uart3: serial@40080000 {
 250                                 compatible = "nxp,lpc3220-uart";
 251                                 reg = <0x40080000 0x1000>;
 252                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 253                                 reg-shift = <2>;
 254                                 clocks = <&clk LPC32XX_CLK_UART3>;
 255                                 status = "disabled";
 256                         };
 257
 258                         uart4: serial@40088000 {
 259                                 compatible = "nxp,lpc3220-uart";
 260                                 reg = <0x40088000 0x1000>;
 261                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 262                                 reg-shift = <2>;
 263                                 clocks = <&clk LPC32XX_CLK_UART4>;
 264                                 status = "disabled";
 265                         };
 266
 267                         uart6: serial@40098000 {
 268                                 compatible = "nxp,lpc3220-uart";
 269                                 reg = <0x40098000 0x1000>;
 270                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 271                                 reg-shift = <2>;
 272                                 clocks = <&clk LPC32XX_CLK_UART6>;
 273                                 status = "disabled";
 274                         };
 275
 276                         i2c1: i2c@400a0000 {
 277                                 compatible = "nxp,pnx-i2c";
 278                                 reg = <0x400A0000 0x100>;
 279                                 interrupt-parent = <&sic1>;
 280                                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 281                                 #address-cells = <1>;
 282                                 #size-cells = <0>;
 283                                 pnx,timeout = <0x64>;
 284                                 clocks = <&clk LPC32XX_CLK_I2C1>;
 285                         };
 286
 287                         i2c2: i2c@400a8000 {
 288                                 compatible = "nxp,pnx-i2c";
 289                                 reg = <0x400A8000 0x100>;
 290                                 interrupt-parent = <&sic1>;
 291                                 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 292                                 #address-cells = <1>;
 293                                 #size-cells = <0>;
 294                                 pnx,timeout = <0x64>;
 295                                 clocks = <&clk LPC32XX_CLK_I2C2>;
 296                         };
 297
 298                         mpwm: mpwm@400e8000 {
 299                                 compatible = "nxp,lpc3220-motor-pwm";
 300                                 reg = <0x400E8000 0x78>;
 301                                 status = "disabled";
 302                                 #pwm-cells = <2>;
 303                         };
 304                 };
 305
 306                 fab {
 307                         #address-cells = <1>;
 308                         #size-cells = <1>;
 309                         compatible = "simple-bus";
 310                         ranges = <0x20000000 0x20000000 0x30000000>;
 311
 312                         /* System Control Block */
 313                         scb {
 314                                 compatible = "simple-bus";
 315                                 ranges = <0x0 0x040004000 0x00001000>;
 316                                 #address-cells = <1>;
 317                                 #size-cells = <1>;
 318
 319                                 clk: clock-controller@0 {
 320                                         compatible = "nxp,lpc3220-clk";
 321                                         reg = <0x00 0x114>;
 322                                         #clock-cells = <1>;
 323
 324                                         clocks = <&xtal_32k>, <&xtal>;
 325                                         clock-names = "xtal_32k", "xtal";
 326                                 };
 327                         };
 328
 329                         mic: interrupt-controller@40008000 {
 330                                 compatible = "nxp,lpc3220-mic";
 331                                 reg = <0x40008000 0x4000>;
 332                                 interrupt-controller;
 333                                 #interrupt-cells = <2>;
 334                         };
 335
 336                         sic1: interrupt-controller@4000c000 {
 337                                 compatible = "nxp,lpc3220-sic";
 338                                 reg = <0x4000c000 0x4000>;
 339                                 interrupt-controller;
 340                                 #interrupt-cells = <2>;
 341
 342                                 interrupt-parent = <&mic>;
 343                                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
 344                                              <30 IRQ_TYPE_LEVEL_LOW>;
 345                                 };
 346
 347                         sic2: interrupt-controller@40010000 {
 348                                 compatible = "nxp,lpc3220-sic";
 349                                 reg = <0x40010000 0x4000>;
 350                                 interrupt-controller;
 351                                 #interrupt-cells = <2>;
 352
 353                                 interrupt-parent = <&mic>;
 354                                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
 355                                              <31 IRQ_TYPE_LEVEL_LOW>;
 356                         };
 357
 358                         uart1: serial@40014000 {
 359                                 compatible = "nxp,lpc3220-hsuart";
 360                                 reg = <0x40014000 0x1000>;
 361                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 362                                 status = "disabled";
 363                         };
 364
 365                         uart2: serial@40018000 {
 366                                 compatible = "nxp,lpc3220-hsuart";
 367                                 reg = <0x40018000 0x1000>;
 368                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 369                                 status = "disabled";
 370                         };
 371
 372                         uart7: serial@4001c000 {
 373                                 compatible = "nxp,lpc3220-hsuart";
 374                                 reg = <0x4001c000 0x1000>;
 375                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 376                                 status = "disabled";
 377                         };
 378
 379                         rtc: rtc@40024000 {
 380                                 compatible = "nxp,lpc3220-rtc";
 381                                 reg = <0x40024000 0x1000>;
 382                                 interrupt-parent = <&sic1>;
 383                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 384                                 clocks = <&clk LPC32XX_CLK_RTC>;
 385                         };
 386
 387                         gpio: gpio@40028000 {
 388                                 compatible = "nxp,lpc3220-gpio";
 389                                 reg = <0x40028000 0x1000>;
 390                                 gpio-controller;
 391                                 #gpio-cells = <3>; /* bank, pin, flags */
 392                         };
 393
 394                         timer4: timer@4002c000 {
 395                                 compatible = "nxp,lpc3220-timer";
 396                                 reg = <0x4002C000 0x1000>;
 397                                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 398                                 clocks = <&clk LPC32XX_CLK_TIMER4>;
 399                                 clock-names = "timerclk";
 400                                 status = "disabled";
 401                         };
 402
 403                         timer5: timer@40030000 {
 404                                 compatible = "nxp,lpc3220-timer";
 405                                 reg = <0x40030000 0x1000>;
 406                                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 407                                 clocks = <&clk LPC32XX_CLK_TIMER5>;
 408                                 clock-names = "timerclk";
 409                                 status = "disabled";
 410                         };
 411
 412                         watchdog: watchdog@4003c000 {
 413                                 compatible = "nxp,pnx4008-wdt";
 414                                 reg = <0x4003C000 0x1000>;
 415                                 clocks = <&clk LPC32XX_CLK_WDOG>;
 416                         };
 417
 418                         timer0: timer@40044000 {
 419                                 compatible = "nxp,lpc3220-timer";
 420                                 reg = <0x40044000 0x1000>;
 421                                 clocks = <&clk LPC32XX_CLK_TIMER0>;
 422                                 clock-names = "timerclk";
 423                                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 424                         };
 425
 426                         /*
 427                          * TSC vs. ADC: Since those two share the same
 428                          * hardware, you need to choose from one of the
 429                          * following two and do 'status = "okay";' for one of
 430                          * them
 431                          */
 432
 433                         adc: adc@40048000 {
 434                                 compatible = "nxp,lpc3220-adc";
 435                                 reg = <0x40048000 0x1000>;
 436                                 interrupt-parent = <&sic1>;
 437                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 438                                 clocks = <&clk LPC32XX_CLK_ADC>;
 439                                 status = "disabled";
 440                         };
 441
 442                         tsc: tsc@40048000 {
 443                                 compatible = "nxp,lpc3220-tsc";
 444                                 reg = <0x40048000 0x1000>;
 445                                 interrupt-parent = <&sic1>;
 446                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 447                                 clocks = <&clk LPC32XX_CLK_ADC>;
 448                                 status = "disabled";
 449                         };
 450
 451                         timer1: timer@4004c000 {
 452                                 compatible = "nxp,lpc3220-timer";
 453                                 reg = <0x4004C000 0x1000>;
 454                                 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 455                                 clocks = <&clk LPC32XX_CLK_TIMER1>;
 456                                 clock-names = "timerclk";
 457                         };
 458
 459                         key: key@40050000 {
 460                                 compatible = "nxp,lpc3220-key";
 461                                 reg = <0x40050000 0x1000>;
 462                                 clocks = <&clk LPC32XX_CLK_KEY>;
 463                                 interrupt-parent = <&sic1>;
 464                                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 465                                 status = "disabled";
 466                         };
 467
 468                         timer2: timer@40058000 {
 469                                 compatible = "nxp,lpc3220-timer";
 470                                 reg = <0x40058000 0x1000>;
 471                                 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 472                                 clocks = <&clk LPC32XX_CLK_TIMER2>;
 473                                 clock-names = "timerclk";
 474                                 status = "disabled";
 475                         };
 476
 477                         pwm1: pwm@4005c000 {
 478                                 compatible = "nxp,lpc3220-pwm";
 479                                 reg = <0x4005C000 0x4>;
 480                                 clocks = <&clk LPC32XX_CLK_PWM1>;
 481                                 assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 482                                 assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 483                                 status = "disabled";
 484                         };
 485
 486                         pwm2: pwm@4005c004 {
 487                                 compatible = "nxp,lpc3220-pwm";
 488                                 reg = <0x4005C004 0x4>;
 489                                 clocks = <&clk LPC32XX_CLK_PWM2>;
 490                                 assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 491                                 assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 492                                 status = "disabled";
 493                         };
 494
 495                         timer3: timer@40060000 {
 496                                 compatible = "nxp,lpc3220-timer";
 497                                 reg = <0x40060000 0x1000>;
 498                                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 499                                 clocks = <&clk LPC32XX_CLK_TIMER3>;
 500                                 clock-names = "timerclk";
 501                                 status = "disabled";
 502                         };
 503                 };
 504         };
 505 };