GNU Linux-libre 4.19.264-gnu1
[releases.git] / arch / arm / boot / dts / omap3-ha-common.dtsi
1 /*
2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation.
8  */
9
10 #include "omap3-tao3530.dtsi"
11
12 / {
13         gpio_poweroff {
14                 pinctrl-names = "default";
15                 pinctrl-0 = <&poweroff_pins>;
16
17                 compatible = "gpio-poweroff";
18                 gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;     /* GPIO 168 */
19         };
20 };
21
22 &omap3_pmx_core {
23         sound2_pins: pinmux_sound2_pins {
24                 pinctrl-single,pins = <
25                         OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)       /* gpmc_d8 gpio_44 */
26                 >;
27         };
28
29         led_blue_pins: pinmux_led_blue_pins {
30                 pinctrl-single,pins = <
31                         OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)       /* cam_xclka gpio_96, LED blue */
32                 >;
33         };
34
35         led_green_pins: pinmux_led_green_pins {
36                 pinctrl-single,pins = <
37                         OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)       /* cam_d8 gpio_107, LED green */
38                 >;
39         };
40
41         led_red_pins: pinmux_led_red_pins {
42                 pinctrl-single,pins = <
43                         OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)        /* cam_xclkb gpio_111, LED red */
44                 >;
45         };
46
47         poweroff_pins: pinmux_poweroff_pins {
48                 pinctrl-single,pins = <
49                         OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)        /* i2c2_scl gpio_168 */
50                 >;
51         };
52
53         powerdown_input_pins: pinmux_powerdown_input_pins {
54                 pinctrl-single,pins = <
55                         OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */
56                 >;
57         };
58
59         fpga_boot0_pins: fpga_boot0_pins {
60                 pinctrl-single,pins = <
61                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)        /* cam_d2 gpio_101 */
62                         OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)       /* cam_d3 gpio_102 */
63                         OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4)       /* cam_d4 gpio_103 */
64                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */
65                 >;
66         };
67
68         fpga_boot1_pins: fpga_boot1_pins {
69                 pinctrl-single,pins = <
70                         OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)        /* gpmc_d10 gpio_46 */
71                         OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)       /* gpmc_d11 gpio_47 */
72                         OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4)       /* gpmc_d12 gpio_48 */
73                         OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */
74                 >;
75         };
76 };
77
78 /* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
79 &i2c2 {
80         status = "disabled";
81 };
82
83 &i2c3 {
84         clock-frequency = <100000>;
85
86         pinctrl-names = "default";
87         pinctrl-0 = <&i2c3_pins>;
88 };