arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1088A QDS Board.
   4  *
   5  * Copyright 2017 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "fsl-ls1088a.dtsi"
  14
  15 / {
  16         model = "LS1088A QDS Board";
  17         compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
  18 };
  19
  20 &i2c0 {
  21         status = "okay";
  22
  23         i2c-switch@77 {
  24                 compatible = "nxp,pca9547";
  25                 reg = <0x77>;
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 i2c@2 {
  30                         #address-cells = <1>;
  31                         #size-cells = <0>;
  32                         reg = <0x2>;
  33
  34                         ina220@40 {
  35                                 compatible = "ti,ina220";
  36                                 reg = <0x40>;
  37                                 shunt-resistor = <1000>;
  38                         };
  39
  40                         ina220@41 {
  41                                 compatible = "ti,ina220";
  42                                 reg = <0x41>;
  43                                 shunt-resistor = <1000>;
  44                         };
  45                 };
  46
  47                 i2c@3 {
  48                         #address-cells = <1>;
  49                         #size-cells = <0>;
  50                         reg = <0x3>;
  51
  52                         temp-sensor@4c {
  53                                 compatible = "adi,adt7461a";
  54                                 reg = <0x4c>;
  55                         };
  56
  57                         rtc@51 {
  58                                 compatible = "nxp,pcf2129";
  59                                 reg = <0x51>;
  60                                 /* IRQ10_B */
  61                                 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
  62                         };
  63
  64                         eeprom@56 {
  65                                 compatible = "atmel,24c512";
  66                                 reg = <0x56>;
  67                         };
  68
  69                         eeprom@57 {
  70                                 compatible = "atmel,24c512";
  71                                 reg = <0x57>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &ifc {
  78         ranges = <0 0 0x5 0x80000000 0x08000000
  79                   2 0 0x5 0x30000000 0x00010000
  80                   3 0 0x5 0x20000000 0x00010000>;
  81         status = "okay";
  82
  83         nor@0,0 {
  84                 compatible = "cfi-flash";
  85                 reg = <0x0 0x0 0x8000000>;
  86                 bank-width = <2>;
  87                 device-width = <1>;
  88         };
  89
  90         nand@2,0 {
  91                 compatible = "fsl,ifc-nand";
  92                 reg = <0x2 0x0 0x10000>;
  93         };
  94
  95         fpga: board-control@3,0 {
  96                 compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
  97                 reg = <0x3 0x0 0x0000100>;
  98         };
  99 };
 100
 101 &duart0 {
 102         status = "okay";
 103 };
 104
 105 &duart1 {
 106         status = "okay";
 107 };
 108
 109 &esdhc {
 110         status = "okay";
 111 };
 112
 113 &sata {
 114         status = "okay";
 115 };