GNU Linux-libre 4.19.286-gnu1
[releases.git] / arch / mips / kernel / csrc-sb1250.c
1 /*
2  * Copyright (C) 2000, 2001 Broadcom Corporation
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version 2
7  * of the License, or (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  */
14 #include <linux/clocksource.h>
15 #include <linux/sched_clock.h>
16
17 #include <asm/addrspace.h>
18 #include <asm/io.h>
19 #include <asm/time.h>
20
21 #include <asm/sibyte/sb1250.h>
22 #include <asm/sibyte/sb1250_regs.h>
23 #include <asm/sibyte/sb1250_int.h>
24 #include <asm/sibyte/sb1250_scd.h>
25
26 #define SB1250_HPT_NUM          3
27 #define SB1250_HPT_VALUE        M_SCD_TIMER_CNT /* max value */
28
29 /*
30  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
31  * again.
32  */
33 static inline u64 sb1250_hpt_get_cycles(void)
34 {
35         unsigned int count;
36         void __iomem *addr;
37
38         addr = IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT));
39         count = G_SCD_TIMER_CNT(__raw_readq(addr));
40
41         return SB1250_HPT_VALUE - count;
42 }
43
44 static u64 sb1250_hpt_read(struct clocksource *cs)
45 {
46         return sb1250_hpt_get_cycles();
47 }
48
49 struct clocksource bcm1250_clocksource = {
50         .name   = "bcm1250-counter-3",
51         .rating = 200,
52         .read   = sb1250_hpt_read,
53         .mask   = CLOCKSOURCE_MASK(23),
54         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
55 };
56
57 static u64 notrace sb1250_read_sched_clock(void)
58 {
59         return sb1250_hpt_get_cycles();
60 }
61
62 void __init sb1250_clocksource_init(void)
63 {
64         struct clocksource *cs = &bcm1250_clocksource;
65
66         /* Setup hpt using timer #3 but do not enable irq for it */
67         __raw_writeq(0,
68                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
69                                                  R_SCD_TIMER_CFG)));
70         __raw_writeq(SB1250_HPT_VALUE,
71                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
72                                                  R_SCD_TIMER_INIT)));
73         __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
74                      IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
75                                                  R_SCD_TIMER_CFG)));
76
77         clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
78
79         sched_clock_register(sb1250_read_sched_clock, 23, V_SCD_TIMER_FREQ);
80 }