arch/mips/kernel/smp-bmips.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
   7  *
   8  * SMP support for BMIPS
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/sched.h>
  13 #include <linux/sched/hotplug.h>
  14 #include <linux/sched/task_stack.h>
  15 #include <linux/mm.h>
  16 #include <linux/delay.h>
  17 #include <linux/smp.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/spinlock.h>
  20 #include <linux/cpu.h>
  21 #include <linux/cpumask.h>
  22 #include <linux/reboot.h>
  23 #include <linux/io.h>
  24 #include <linux/compiler.h>
  25 #include <linux/linkage.h>
  26 #include <linux/bug.h>
  27 #include <linux/kernel.h>
  28
  29 #include <asm/time.h>
  30 #include <asm/pgtable.h>
  31 #include <asm/processor.h>
  32 #include <asm/bootinfo.h>
  33 #include <asm/pmon.h>
  34 #include <asm/cacheflush.h>
  35 #include <asm/tlbflush.h>
  36 #include <asm/mipsregs.h>
  37 #include <asm/bmips.h>
  38 #include <asm/traps.h>
  39 #include <asm/barrier.h>
  40 #include <asm/cpu-features.h>
  41
  42 static int __maybe_unused max_cpus = 1;
  43
  44 /* these may be configured by the platform code */
  45 int bmips_smp_enabled = 1;
  46 int bmips_cpu_offset;
  47 cpumask_t bmips_booted_mask;
  48 unsigned long bmips_tp1_irqs = IE_IRQ1;
  49
  50 #define RESET_FROM_KSEG0                0x80080800
  51 #define RESET_FROM_KSEG1                0xa0080800
  52
  53 static void bmips_set_reset_vec(int cpu, u32 val);
  54
  55 #ifdef CONFIG_SMP
  56
  57 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
  58 unsigned long bmips_smp_boot_sp;
  59 unsigned long bmips_smp_boot_gp;
  60
  61 static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
  62 static void bmips5000_send_ipi_single(int cpu, unsigned int action);
  63 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
  64 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
  65
  66 /* SW interrupts 0,1 are used for interprocessor signaling */
  67 #define IPI0_IRQ                        (MIPS_CPU_IRQ_BASE + 0)
  68 #define IPI1_IRQ                        (MIPS_CPU_IRQ_BASE + 1)
  69
  70 #define CPUNUM(cpu, shift)              (((cpu) + bmips_cpu_offset) << (shift))
  71 #define ACTION_CLR_IPI(cpu, ipi)        (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  72 #define ACTION_SET_IPI(cpu, ipi)        (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  73 #define ACTION_BOOT_THREAD(cpu)         (0x08 | CPUNUM(cpu, 0))
  74
  75 static void __init bmips_smp_setup(void)
  76 {
  77         int i, cpu = 1, boot_cpu = 0;
  78         int cpu_hw_intr;
  79
  80         switch (current_cpu_type()) {
  81         case CPU_BMIPS4350:
  82         case CPU_BMIPS4380:
  83                 /* arbitration priority */
  84                 clear_c0_brcm_cmt_ctrl(0x30);
  85
  86                 /* NBK and weak order flags */
  87                 set_c0_brcm_config_0(0x30000);
  88
  89                 /* Find out if we are running on TP0 or TP1 */
  90                 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
  91
  92                 /*
  93                  * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
  94                  * thread
  95                  * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
  96                  * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
  97                  */
  98                 if (boot_cpu == 0)
  99                         cpu_hw_intr = 0x02;
 100                 else
 101                         cpu_hw_intr = 0x1d;
 102
 103                 change_c0_brcm_cmt_intr(0xf8018000,
 104                                         (cpu_hw_intr << 27) | (0x03 << 15));
 105
 106                 /* single core, 2 threads (2 pipelines) */
 107                 max_cpus = 2;
 108
 109                 break;
 110         case CPU_BMIPS5000:
 111                 /* enable raceless SW interrupts */
 112                 set_c0_brcm_config(0x03 << 22);
 113
 114                 /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
 115                 change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
 116
 117                 /* N cores, 2 threads per core */
 118                 max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
 119
 120                 /* clear any pending SW interrupts */
 121                 for (i = 0; i < max_cpus; i++) {
 122                         write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
 123                         write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
 124                 }
 125
 126                 break;
 127         default:
 128                 max_cpus = 1;
 129         }
 130
 131         if (!bmips_smp_enabled)
 132                 max_cpus = 1;
 133
 134         /* this can be overridden by the BSP */
 135         if (!board_ebase_setup)
 136                 board_ebase_setup = &bmips_ebase_setup;
 137
 138         __cpu_number_map[boot_cpu] = 0;
 139         __cpu_logical_map[0] = boot_cpu;
 140
 141         for (i = 0; i < max_cpus; i++) {
 142                 if (i != boot_cpu) {
 143                         __cpu_number_map[i] = cpu;
 144                         __cpu_logical_map[cpu] = i;
 145                         cpu++;
 146                 }
 147                 set_cpu_possible(i, 1);
 148                 set_cpu_present(i, 1);
 149         }
 150 }
 151
 152 /*
 153  * IPI IRQ setup - runs on CPU0
 154  */
 155 static void bmips_prepare_cpus(unsigned int max_cpus)
 156 {
 157         irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
 158
 159         switch (current_cpu_type()) {
 160         case CPU_BMIPS4350:
 161         case CPU_BMIPS4380:
 162                 bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
 163                 break;
 164         case CPU_BMIPS5000:
 165                 bmips_ipi_interrupt = bmips5000_ipi_interrupt;
 166                 break;
 167         default:
 168                 return;
 169         }
 170
 171         if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
 172                         IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 173                 panic("Can't request IPI0 interrupt");
 174         if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
 175                         IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 176                 panic("Can't request IPI1 interrupt");
 177 }
 178
 179 /*
 180  * Tell the hardware to boot CPUx - runs on CPU0
 181  */
 182 static int bmips_boot_secondary(int cpu, struct task_struct *idle)
 183 {
 184         bmips_smp_boot_sp = __KSTK_TOS(idle);
 185         bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
 186         mb();
 187
 188         /*
 189          * Initial boot sequence for secondary CPU:
 190          *   bmips_reset_nmi_vec @ a000_0000 ->
 191          *   bmips_smp_entry ->
 192          *   plat_wired_tlb_setup (cached function call; optional) ->
 193          *   start_secondary (cached jump)
 194          *
 195          * Warm restart sequence:
 196          *   play_dead WAIT loop ->
 197          *   bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
 198          *   eret to play_dead ->
 199          *   bmips_secondary_reentry ->
 200          *   start_secondary
 201          */
 202
 203         pr_info("SMP: Booting CPU%d...\n", cpu);
 204
 205         if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
 206                 /* kseg1 might not exist if this CPU enabled XKS01 */
 207                 bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);
 208
 209                 switch (current_cpu_type()) {
 210                 case CPU_BMIPS4350:
 211                 case CPU_BMIPS4380:
 212                         bmips43xx_send_ipi_single(cpu, 0);
 213                         break;
 214                 case CPU_BMIPS5000:
 215                         bmips5000_send_ipi_single(cpu, 0);
 216                         break;
 217                 }
 218         } else {
 219                 bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);
 220
 221                 switch (current_cpu_type()) {
 222                 case CPU_BMIPS4350:
 223                 case CPU_BMIPS4380:
 224                         /* Reset slave TP1 if booting from TP0 */
 225                         if (cpu_logical_map(cpu) == 1)
 226                                 set_c0_brcm_cmt_ctrl(0x01);
 227                         break;
 228                 case CPU_BMIPS5000:
 229                         write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
 230                         break;
 231                 }
 232                 cpumask_set_cpu(cpu, &bmips_booted_mask);
 233         }
 234
 235         return 0;
 236 }
 237
 238 /*
 239  * Early setup - runs on secondary CPU after cache probe
 240  */
 241 static void bmips_init_secondary(void)
 242 {
 243         bmips_cpu_setup();
 244
 245         switch (current_cpu_type()) {
 246         case CPU_BMIPS4350:
 247         case CPU_BMIPS4380:
 248                 clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 249                 break;
 250         case CPU_BMIPS5000:
 251                 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 252                 cpu_set_core(&current_cpu_data, (read_c0_brcm_config() >> 25) & 3);
 253                 break;
 254         }
 255 }
 256
 257 /*
 258  * Late setup - runs on secondary CPU before entering the idle loop
 259  */
 260 static void bmips_smp_finish(void)
 261 {
 262         pr_info("SMP: CPU%d is running\n", smp_processor_id());
 263
 264         /* make sure there won't be a timer interrupt for a little while */
 265         write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
 266
 267         irq_enable_hazard();
 268         set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
 269         irq_enable_hazard();
 270 }
 271
 272 /*
 273  * BMIPS5000 raceless IPIs
 274  *
 275  * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
 276  * IPI0 is used for SMP_RESCHEDULE_YOURSELF
 277  * IPI1 is used for SMP_CALL_FUNCTION
 278  */
 279
 280 static void bmips5000_send_ipi_single(int cpu, unsigned int action)
 281 {
 282         write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
 283 }
 284
 285 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
 286 {
 287         int action = irq - IPI0_IRQ;
 288
 289         write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));
 290
 291         if (action == 0)
 292                 scheduler_ipi();
 293         else
 294                 generic_smp_call_function_interrupt();
 295
 296         return IRQ_HANDLED;
 297 }
 298
 299 static void bmips5000_send_ipi_mask(const struct cpumask *mask,
 300         unsigned int action)
 301 {
 302         unsigned int i;
 303
 304         for_each_cpu(i, mask)
 305                 bmips5000_send_ipi_single(i, action);
 306 }
 307
 308 /*
 309  * BMIPS43xx racey IPIs
 310  *
 311  * We use one inbound SW IRQ for each CPU.
 312  *
 313  * A spinlock must be held in order to keep CPUx from accidentally clearing
 314  * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy.  The
 315  * same spinlock is used to protect the action masks.
 316  */
 317
 318 static DEFINE_SPINLOCK(ipi_lock);
 319 static DEFINE_PER_CPU(int, ipi_action_mask);
 320
 321 static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
 322 {
 323         unsigned long flags;
 324
 325         spin_lock_irqsave(&ipi_lock, flags);
 326         set_c0_cause(cpu ? C_SW1 : C_SW0);
 327         per_cpu(ipi_action_mask, cpu) |= action;
 328         irq_enable_hazard();
 329         spin_unlock_irqrestore(&ipi_lock, flags);
 330 }
 331
 332 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
 333 {
 334         unsigned long flags;
 335         int action, cpu = irq - IPI0_IRQ;
 336
 337         spin_lock_irqsave(&ipi_lock, flags);
 338         action = __this_cpu_read(ipi_action_mask);
 339         per_cpu(ipi_action_mask, cpu) = 0;
 340         clear_c0_cause(cpu ? C_SW1 : C_SW0);
 341         spin_unlock_irqrestore(&ipi_lock, flags);
 342
 343         if (action & SMP_RESCHEDULE_YOURSELF)
 344                 scheduler_ipi();
 345         if (action & SMP_CALL_FUNCTION)
 346                 generic_smp_call_function_interrupt();
 347
 348         return IRQ_HANDLED;
 349 }
 350
 351 static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
 352         unsigned int action)
 353 {
 354         unsigned int i;
 355
 356         for_each_cpu(i, mask)
 357                 bmips43xx_send_ipi_single(i, action);
 358 }
 359
 360 #ifdef CONFIG_HOTPLUG_CPU
 361
 362 static int bmips_cpu_disable(void)
 363 {
 364         unsigned int cpu = smp_processor_id();
 365
 366         if (cpu == 0)
 367                 return -EBUSY;
 368
 369         pr_info("SMP: CPU%d is offline\n", cpu);
 370
 371         set_cpu_online(cpu, false);
 372         calculate_cpu_foreign_map();
 373         irq_cpu_offline();
 374         clear_c0_status(IE_IRQ5);
 375
 376         local_flush_tlb_all();
 377         local_flush_icache_range(0, ~0);
 378
 379         return 0;
 380 }
 381
 382 static void bmips_cpu_die(unsigned int cpu)
 383 {
 384 }
 385
 386 void __ref play_dead(void)
 387 {
 388         idle_task_exit();
 389
 390         /* flush data cache */
 391         _dma_cache_wback_inv(0, ~0);
 392
 393         /*
 394          * Wakeup is on SW0 or SW1; disable everything else
 395          * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
 396          * IRQ handlers; this clears ST0_IE and returns immediately.
 397          */
 398         clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
 399         change_c0_status(
 400                 IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
 401                 IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
 402         irq_disable_hazard();
 403
 404         /*
 405          * wait for SW interrupt from bmips_boot_secondary(), then jump
 406          * back to start_secondary()
 407          */
 408         __asm__ __volatile__(
 409         "       wait\n"
 410         "       j       bmips_secondary_reentry\n"
 411         : : : "memory");
 412 }
 413
 414 #endif /* CONFIG_HOTPLUG_CPU */
 415
 416 const struct plat_smp_ops bmips43xx_smp_ops = {
 417         .smp_setup              = bmips_smp_setup,
 418         .prepare_cpus           = bmips_prepare_cpus,
 419         .boot_secondary         = bmips_boot_secondary,
 420         .smp_finish             = bmips_smp_finish,
 421         .init_secondary         = bmips_init_secondary,
 422         .send_ipi_single        = bmips43xx_send_ipi_single,
 423         .send_ipi_mask          = bmips43xx_send_ipi_mask,
 424 #ifdef CONFIG_HOTPLUG_CPU
 425         .cpu_disable            = bmips_cpu_disable,
 426         .cpu_die                = bmips_cpu_die,
 427 #endif
 428 };
 429
 430 const struct plat_smp_ops bmips5000_smp_ops = {
 431         .smp_setup              = bmips_smp_setup,
 432         .prepare_cpus           = bmips_prepare_cpus,
 433         .boot_secondary         = bmips_boot_secondary,
 434         .smp_finish             = bmips_smp_finish,
 435         .init_secondary         = bmips_init_secondary,
 436         .send_ipi_single        = bmips5000_send_ipi_single,
 437         .send_ipi_mask          = bmips5000_send_ipi_mask,
 438 #ifdef CONFIG_HOTPLUG_CPU
 439         .cpu_disable            = bmips_cpu_disable,
 440         .cpu_die                = bmips_cpu_die,
 441 #endif
 442 };
 443
 444 #endif /* CONFIG_SMP */
 445
 446 /***********************************************************************
 447  * BMIPS vector relocation
 448  * This is primarily used for SMP boot, but it is applicable to some
 449  * UP BMIPS systems as well.
 450  ***********************************************************************/
 451
 452 static void bmips_wr_vec(unsigned long dst, char *start, char *end)
 453 {
 454         memcpy((void *)dst, start, end - start);
 455         dma_cache_wback(dst, end - start);
 456         local_flush_icache_range(dst, dst + (end - start));
 457         instruction_hazard();
 458 }
 459
 460 static inline void bmips_nmi_handler_setup(void)
 461 {
 462         bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
 463                 bmips_reset_nmi_vec_end);
 464         bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
 465                 bmips_smp_int_vec_end);
 466 }
 467
 468 struct reset_vec_info {
 469         int cpu;
 470         u32 val;
 471 };
 472
 473 static void bmips_set_reset_vec_remote(void *vinfo)
 474 {
 475         struct reset_vec_info *info = vinfo;
 476         int shift = info->cpu & 0x01 ? 16 : 0;
 477         u32 mask = ~(0xffff << shift), val = info->val >> 16;
 478
 479         preempt_disable();
 480         if (smp_processor_id() > 0) {
 481                 smp_call_function_single(0, &bmips_set_reset_vec_remote,
 482                                          info, 1);
 483         } else {
 484                 if (info->cpu & 0x02) {
 485                         /* BMIPS5200 "should" use mask/shift, but it's buggy */
 486                         bmips_write_zscm_reg(0xa0, (val << 16) | val);
 487                         bmips_read_zscm_reg(0xa0);
 488                 } else {
 489                         write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
 490                                               (val << shift));
 491                 }
 492         }
 493         preempt_enable();
 494 }
 495
 496 static void bmips_set_reset_vec(int cpu, u32 val)
 497 {
 498         struct reset_vec_info info;
 499
 500         if (current_cpu_type() == CPU_BMIPS5000) {
 501                 /* this needs to run from CPU0 (which is always online) */
 502                 info.cpu = cpu;
 503                 info.val = val;
 504                 bmips_set_reset_vec_remote(&info);
 505         } else {
 506                 void __iomem *cbr = BMIPS_GET_CBR();
 507
 508                 if (cpu == 0)
 509                         __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
 510                 else {
 511                         if (current_cpu_type() != CPU_BMIPS4380)
 512                                 return;
 513                         __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
 514                 }
 515         }
 516         __sync();
 517         back_to_back_c0_hazard();
 518 }
 519
 520 void bmips_ebase_setup(void)
 521 {
 522         unsigned long new_ebase = ebase;
 523
 524         BUG_ON(ebase != CKSEG0);
 525
 526         switch (current_cpu_type()) {
 527         case CPU_BMIPS4350:
 528                 /*
 529                  * BMIPS4350 cannot relocate the normal vectors, but it
 530                  * can relocate the BEV=1 vectors.  So CPU1 starts up at
 531                  * the relocated BEV=1, IV=0 general exception vector @
 532                  * 0xa000_0380.
 533                  *
 534                  * set_uncached_handler() is used here because:
 535                  *  - CPU1 will run this from uncached space
 536                  *  - None of the cacheflush functions are set up yet
 537                  */
 538                 set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
 539                         &bmips_smp_int_vec, 0x80);
 540                 __sync();
 541                 return;
 542         case CPU_BMIPS3300:
 543         case CPU_BMIPS4380:
 544                 /*
 545                  * 0x8000_0000: reset/NMI (initially in kseg1)
 546                  * 0x8000_0400: normal vectors
 547                  */
 548                 new_ebase = 0x80000400;
 549                 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 550                 break;
 551         case CPU_BMIPS5000:
 552                 /*
 553                  * 0x8000_0000: reset/NMI (initially in kseg1)
 554                  * 0x8000_1000: normal vectors
 555                  */
 556                 new_ebase = 0x80001000;
 557                 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 558                 write_c0_ebase(new_ebase);
 559                 break;
 560         default:
 561                 return;
 562         }
 563
 564         board_nmi_handler_setup = &bmips_nmi_handler_setup;
 565         ebase = new_ebase;
 566 }
 567
 568 asmlinkage void __weak plat_wired_tlb_setup(void)
 569 {
 570         /*
 571          * Called when starting/restarting a secondary CPU.
 572          * Kernel stacks and other important data might only be accessible
 573          * once the wired entries are present.
 574          */
 575 }
 576
 577 void bmips_cpu_setup(void)
 578 {
 579         void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
 580         u32 __maybe_unused cfg;
 581
 582         switch (current_cpu_type()) {
 583         case CPU_BMIPS3300:
 584                 /* Set BIU to async mode */
 585                 set_c0_brcm_bus_pll(BIT(22));
 586                 __sync();
 587
 588                 /* put the BIU back in sync mode */
 589                 clear_c0_brcm_bus_pll(BIT(22));
 590
 591                 /* clear BHTD to enable branch history table */
 592                 clear_c0_brcm_reset(BIT(16));
 593
 594                 /* Flush and enable RAC */
 595                 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 596                 __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 597                 __raw_readl(cbr + BMIPS_RAC_CONFIG);
 598
 599                 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 600                 __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
 601                 __raw_readl(cbr + BMIPS_RAC_CONFIG);
 602
 603                 cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 604                 __raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
 605                 __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 606                 break;
 607
 608         case CPU_BMIPS4380:
 609                 /* CBG workaround for early BMIPS4380 CPUs */
 610                 switch (read_c0_prid()) {
 611                 case 0x2a040:
 612                 case 0x2a042:
 613                 case 0x2a044:
 614                 case 0x2a060:
 615                         cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
 616                         __raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
 617                         __raw_readl(cbr + BMIPS_L2_CONFIG);
 618                 }
 619
 620                 /* clear BHTD to enable branch history table */
 621                 clear_c0_brcm_config_0(BIT(21));
 622
 623                 /* XI/ROTR enable */
 624                 set_c0_brcm_config_0(BIT(23));
 625                 set_c0_brcm_cmt_ctrl(BIT(15));
 626                 break;
 627
 628         case CPU_BMIPS5000:
 629                 /* enable RDHWR, BRDHWR */
 630                 set_c0_brcm_config(BIT(17) | BIT(21));
 631
 632                 /* Disable JTB */
 633                 __asm__ __volatile__(
 634                 "       .set    noreorder\n"
 635                 "       li      $8, 0x5a455048\n"
 636                 "       .word   0x4088b00f\n"   /* mtc0 t0, $22, 15 */
 637                 "       .word   0x4008b008\n"   /* mfc0 t0, $22, 8 */
 638                 "       li      $9, 0x00008000\n"
 639                 "       or      $8, $8, $9\n"
 640                 "       .word   0x4088b008\n"   /* mtc0 t0, $22, 8 */
 641                 "       sync\n"
 642                 "       li      $8, 0x0\n"
 643                 "       .word   0x4088b00f\n"   /* mtc0 t0, $22, 15 */
 644                 "       .set    reorder\n"
 645                 : : : "$8", "$9");
 646
 647                 /* XI enable */
 648                 set_c0_brcm_config(BIT(27));
 649
 650                 /* enable MIPS32R2 ROR instruction for XI TLB handlers */
 651                 __asm__ __volatile__(
 652                 "       li      $8, 0x5a455048\n"
 653                 "       .word   0x4088b00f\n"   /* mtc0 $8, $22, 15 */
 654                 "       nop; nop; nop\n"
 655                 "       .word   0x4008b008\n"   /* mfc0 $8, $22, 8 */
 656                 "       lui     $9, 0x0100\n"
 657                 "       or      $8, $9\n"
 658                 "       .word   0x4088b008\n"   /* mtc0 $8, $22, 8 */
 659                 : : : "$8", "$9");
 660                 break;
 661         }
 662 }