arch/powerpc/boot/dts/fsl/kmcoge4.dts

   1 /*
   2  * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
   3  *
   4  * (C) Copyright 2014
   5  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
   6  *
   7  * Copyright 2011 Freescale Semiconductor Inc.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /include/ "p2041si-pre.dtsi"
  16
  17 / {
  18         model = "keymile,kmcoge4";
  19         compatible = "keymile,kmcoge4", "keymile,kmp204x";
  20         #address-cells = <2>;
  21         #size-cells = <2>;
  22         interrupt-parent = <&mpic>;
  23
  24         memory {
  25                 device_type = "memory";
  26         };
  27
  28         reserved-memory {
  29                 #address-cells = <2>;
  30                 #size-cells = <2>;
  31                 ranges;
  32
  33                 bman_fbpr: bman-fbpr {
  34                         size = <0 0x1000000>;
  35                         alignment = <0 0x1000000>;
  36                 };
  37                 qman_fqd: qman-fqd {
  38                         size = <0 0x400000>;
  39                         alignment = <0 0x400000>;
  40                 };
  41                 qman_pfdr: qman-pfdr {
  42                         size = <0 0x2000000>;
  43                         alignment = <0 0x2000000>;
  44                 };
  45         };
  46
  47         dcsr: dcsr@f00000000 {
  48                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  49         };
  50
  51         bportals: bman-portals@ff4000000 {
  52                 ranges = <0x0 0xf 0xf4000000 0x200000>;
  53         };
  54
  55         qportals: qman-portals@ff4200000 {
  56                 ranges = <0x0 0xf 0xf4200000 0x200000>;
  57         };
  58
  59         soc: soc@ffe000000 {
  60                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  61                 reg = <0xf 0xfe000000 0 0x00001000>;
  62                 spi@110000 {
  63                         flash@0 {
  64                                 #address-cells = <1>;
  65                                 #size-cells = <1>;
  66                                 compatible = "spansion,s25fl256s1", "jedec,spi-nor";
  67                                 reg = <0>;
  68                                 spi-max-frequency = <20000000>; /* input clock */
  69                         };
  70
  71                         network_clock@1 {
  72                                 compatible = "zarlink,zl30343";
  73                                 reg = <1>;
  74                                 spi-max-frequency = <8000000>;
  75                         };
  76
  77                         flash@2 {
  78                                 #address-cells = <1>;
  79                                 #size-cells = <1>;
  80                                 compatible = "micron,m25p32", "jedec,spi-nor";
  81                                 reg = <2>;
  82                                 spi-max-frequency = <15000000>;
  83                         };
  84                 };
  85
  86                 i2c@119000 {
  87                         status = "disabled";
  88                 };
  89
  90                 i2c@119100 {
  91                         status = "disabled";
  92                 };
  93
  94                 usb0: usb@210000 {
  95                         status = "disabled";
  96                 };
  97
  98                 usb1: usb@211000 {
  99                         status = "disabled";
 100                 };
 101
 102                 sata@220000 {
 103                         status = "disabled";
 104                 };
 105
 106                 sata@221000 {
 107                         status = "disabled";
 108                 };
 109
 110                 fman0: fman@400000 {
 111                         enet0: ethernet@e0000 {
 112                                 phy-connection-type = "sgmii";
 113                                 fixed-link {
 114                                         speed = <1000>;
 115                                         full-duplex;
 116                                 };
 117                         };
 118                         mdio0: mdio@e1120 {
 119                                 front_phy: ethernet-phy@11 {
 120                                         reg = <0x11>;
 121                                 };
 122                         };
 123
 124                         enet1: ethernet@e2000 {
 125                                 phy-connection-type = "sgmii";
 126                                 fixed-link {
 127                                         speed = <1000>;
 128                                         full-duplex;
 129                                 };
 130                         };
 131                         enet2: ethernet@e4000 {
 132                                 status = "disabled";
 133                         };
 134
 135                         enet3: ethernet@e6000 {
 136                                 status = "disabled";
 137                         };
 138                         enet4: ethernet@e8000 {
 139                                 phy-handle = <&front_phy>;
 140                                 phy-connection-type = "rgmii";
 141                         };
 142                         enet5: ethernet@f0000 {
 143                                 status = "disabled";
 144                         };
 145                 };
 146         };
 147
 148         rio: rapidio@ffe0c0000 {
 149                 status = "disabled";
 150         };
 151
 152         lbc: localbus@ffe124000 {
 153                 reg = <0xf 0xfe124000 0 0x1000>;
 154                 ranges = <0 0 0xf 0xffa00000 0x00040000         /* LB 0 */
 155                           1 0 0xf 0xfb000000 0x00010000         /* LB 1 */
 156                           2 0 0xf 0xd0000000 0x10000000         /* LB 2 */
 157                           3 0 0xf 0xe0000000 0x10000000>;       /* LB 3 */
 158
 159                 nand@0,0 {
 160                         #address-cells = <1>;
 161                         #size-cells = <1>;
 162                         compatible = "fsl,elbc-fcm-nand";
 163                         reg = <0 0 0x40000>;
 164                 };
 165
 166                 board-control@1,0 {
 167                         compatible = "keymile,qriox";
 168                         reg = <1 0 0x80>;
 169                 };
 170
 171                 chassis-mgmt@3,0 {
 172                         compatible = "keymile,bfticu";
 173                         interrupt-controller;
 174                         #interrupt-cells = <2>;
 175                         reg = <3 0 0x100>;
 176                         interrupt-parent = <&mpic>;
 177                         interrupts = <6 1 0 0>;
 178                 };
 179         };
 180
 181         pci0: pcie@ffe200000 {
 182                 reg = <0xf 0xfe200000 0 0x1000>;
 183                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 184                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 185                 pcie@0 {
 186                         ranges = <0x02000000 0 0xe0000000
 187                                   0x02000000 0 0xe0000000
 188                                   0 0x20000000
 189
 190                                   0x01000000 0 0x00000000
 191                                   0x01000000 0 0x00000000
 192                                   0 0x00010000>;
 193                 };
 194         };
 195
 196         pci1: pcie@ffe201000 {
 197                 status = "disabled";
 198         };
 199
 200         pci2: pcie@ffe202000 {
 201                 reg = <0xf 0xfe202000 0 0x1000>;
 202                 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
 203                           0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
 204                 pcie@0 {
 205                         ranges = <0x02000000 0 0xe0000000
 206                                   0x02000000 0 0xe0000000
 207                                   0 0x20000000
 208
 209                                   0x01000000 0 0x00000000
 210                                   0x01000000 0 0x00000000
 211                                   0 0x00010000>;
 212                 };
 213         };
 214 };
 215
 216 /include/ "p2041si-post.dtsi"