arch/powerpc/boot/dts/fsl/t1023rdb.dts

   1 /*
   2  * T1023 RDB Device Tree Source
   3  *
   4  * Copyright 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "t102xsi-pre.dtsi"
  36
  37 / {
  38         model = "fsl,T1023RDB";
  39         compatible = "fsl,T1023RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         ifc: localbus@ffe124000 {
  45                 reg = <0xf 0xfe124000 0 0x2000>;
  46                 ranges = <0 0 0xf 0xe8000000 0x08000000
  47                           1 0 0xf 0xff800000 0x00010000>;
  48
  49                 nor@0,0 {
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52                         status = "disabled";
  53                         compatible = "cfi-flash";
  54                         reg = <0x0 0x0 0x8000000>;
  55                         bank-width = <2>;
  56                         device-width = <1>;
  57                 };
  58
  59                 nand@1,0 {
  60                         #address-cells = <1>;
  61                         #size-cells = <1>;
  62                         compatible = "fsl,ifc-nand";
  63                         reg = <0x1 0x0 0x10000>;
  64                 };
  65         };
  66
  67         memory {
  68                 device_type = "memory";
  69         };
  70
  71         dcsr: dcsr@f00000000 {
  72                 ranges = <0x00000000 0xf 0x00000000 0x01072000>;
  73         };
  74
  75         soc: soc@ffe000000 {
  76                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  77                 reg = <0xf 0xfe000000 0 0x00001000>;
  78                 spi@110000 {
  79                         flash@0 {
  80                                 #address-cells = <1>;
  81                                 #size-cells = <1>;
  82                                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
  83                                 reg = <0>;
  84                                 spi-max-frequency = <10000000>; /* input clk */
  85                         };
  86                 };
  87
  88                 i2c@118000 {
  89                         eeprom@50 {
  90                                 compatible = "st,m24256";
  91                                 reg = <0x50>;
  92                         };
  93
  94                         rtc@68 {
  95                                 compatible = "dallas,ds1339";
  96                                 reg = <0x68>;
  97                                 interrupts = <0x5 0x1 0 0>;
  98                         };
  99                 };
 100
 101                 i2c@118100 {
 102                         current-sensor@40 {
 103                                 compatible = "ti,ina220";
 104                                 reg = <0x40>;
 105                                 shunt-resistor = <1000>;
 106                         };
 107
 108                         current-sensor@41 {
 109                                 compatible = "ti,ina220";
 110                                 reg = <0x41>;
 111                                 shunt-resistor = <1000>;
 112                         };
 113                 };
 114
 115                 fman@400000 {
 116                         fm1mac1: ethernet@e0000 {
 117                                 phy-handle = <&sgmii_rtk_phy2>;
 118                                 phy-connection-type = "sgmii";
 119                                 sleep = <&rcpm 0x80000000>;
 120                         };
 121
 122                         fm1mac2: ethernet@e2000 {
 123                                 sleep = <&rcpm 0x40000000>;
 124                         };
 125
 126                         fm1mac3: ethernet@e4000 {
 127                                 phy-handle = <&sgmii_aqr_phy3>;
 128                                 phy-connection-type = "sgmii-2500";
 129                                 sleep = <&rcpm 0x20000000>;
 130                         };
 131
 132                         fm1mac4: ethernet@e6000 {
 133                                 phy-handle = <&rgmii_rtk_phy1>;
 134                                 phy-connection-type = "rgmii";
 135                                 sleep = <&rcpm 0x10000000>;
 136                         };
 137
 138
 139                         mdio0: mdio@fc000 {
 140                                 rgmii_rtk_phy1: ethernet-phy@1 {
 141                                         reg = <0x1>;
 142                                 };
 143                                 sgmii_rtk_phy2: ethernet-phy@3 {
 144                                         reg = <0x3>;
 145                                 };
 146                         };
 147
 148                         xmdio0: mdio@fd000 {
 149                                 sgmii_aqr_phy3: ethernet-phy@2 {
 150                                         compatible = "ethernet-phy-ieee802.3-c45";
 151                                         reg = <0x2>;
 152                                 };
 153                         };
 154                 };
 155         };
 156
 157         pci0: pcie@ffe240000 {
 158                 reg = <0xf 0xfe240000 0 0x10000>;
 159                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
 160                           0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
 161                 pcie@0 {
 162                         ranges = <0x02000000 0 0xe0000000
 163                                   0x02000000 0 0xe0000000
 164                                   0 0x10000000
 165
 166                                   0x01000000 0 0x00000000
 167                                   0x01000000 0 0x00000000
 168                                   0 0x00010000>;
 169                 };
 170         };
 171
 172         pci1: pcie@ffe250000 {
 173                 reg = <0xf 0xfe250000 0 0x10000>;
 174                 ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
 175                           0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
 176                 pcie@0 {
 177                         ranges = <0x02000000 0 0xe0000000
 178                                   0x02000000 0 0xe0000000
 179                                   0 0x10000000
 180
 181                                   0x01000000 0 0x00000000
 182                                   0x01000000 0 0x00000000
 183                                   0 0x00010000>;
 184                 };
 185         };
 186
 187         pci2: pcie@ffe260000 {
 188                 reg = <0xf 0xfe260000 0 0x10000>;
 189                 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
 190                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 191                 pcie@0 {
 192                         ranges = <0x02000000 0 0xe0000000
 193                                   0x02000000 0 0xe0000000
 194                                   0 0x10000000
 195
 196                                   0x01000000 0 0x00000000
 197                                   0x01000000 0 0x00000000
 198                                   0 0x00010000>;
 199                 };
 200         };
 201 };
 202
 203 #include "t1023si-post.dtsi"