2 * T1023 RDB Device Tree Source
4 * Copyright 2014 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 /include/ "t102xsi-pre.dtsi"
38 model = "fsl,T1023RDB";
39 compatible = "fsl,T1023RDB";
42 interrupt-parent = <&mpic>;
44 ifc: localbus@ffe124000 {
45 reg = <0xf 0xfe124000 0 0x2000>;
46 ranges = <0 0 0xf 0xe8000000 0x08000000
47 1 0 0xf 0xff800000 0x00010000>;
53 compatible = "cfi-flash";
54 reg = <0x0 0x0 0x8000000>;
62 compatible = "fsl,ifc-nand";
63 reg = <0x1 0x0 0x10000>;
68 device_type = "memory";
71 dcsr: dcsr@f00000000 {
72 ranges = <0x00000000 0xf 0x00000000 0x01072000>;
76 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
77 reg = <0xf 0xfe000000 0 0x00001000>;
82 compatible = "spansion,s25fl512s", "jedec,spi-nor";
84 spi-max-frequency = <10000000>; /* input clk */
90 compatible = "st,m24256";
95 compatible = "dallas,ds1339";
97 interrupts = <0x5 0x1 0 0>;
103 compatible = "ti,ina220";
105 shunt-resistor = <1000>;
109 compatible = "ti,ina220";
111 shunt-resistor = <1000>;
116 fm1mac1: ethernet@e0000 {
117 phy-handle = <&sgmii_rtk_phy2>;
118 phy-connection-type = "sgmii";
119 sleep = <&rcpm 0x80000000>;
122 fm1mac2: ethernet@e2000 {
123 sleep = <&rcpm 0x40000000>;
126 fm1mac3: ethernet@e4000 {
127 phy-handle = <&sgmii_aqr_phy3>;
128 phy-connection-type = "2500base-x";
129 sleep = <&rcpm 0x20000000>;
132 fm1mac4: ethernet@e6000 {
133 phy-handle = <&rgmii_rtk_phy1>;
134 phy-connection-type = "rgmii";
135 sleep = <&rcpm 0x10000000>;
140 rgmii_rtk_phy1: ethernet-phy@1 {
143 sgmii_rtk_phy2: ethernet-phy@3 {
149 sgmii_aqr_phy3: ethernet-phy@2 {
150 compatible = "ethernet-phy-ieee802.3-c45";
157 pci0: pcie@ffe240000 {
158 reg = <0xf 0xfe240000 0 0x10000>;
159 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
160 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
162 ranges = <0x02000000 0 0xe0000000
163 0x02000000 0 0xe0000000
166 0x01000000 0 0x00000000
167 0x01000000 0 0x00000000
172 pci1: pcie@ffe250000 {
173 reg = <0xf 0xfe250000 0 0x10000>;
174 ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
175 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
177 ranges = <0x02000000 0 0xe0000000
178 0x02000000 0 0xe0000000
181 0x01000000 0 0x00000000
182 0x01000000 0 0x00000000
187 pci2: pcie@ffe260000 {
188 reg = <0xf 0xfe260000 0 0x10000>;
189 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
190 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
192 ranges = <0x02000000 0 0xe0000000
193 0x02000000 0 0xe0000000
196 0x01000000 0 0x00000000
197 0x01000000 0 0x00000000
203 #include "t1023si-post.dtsi"