GNU Linux-libre 4.14.290-gnu1
[releases.git] / arch / tile / include / asm / uaccess.h
1 /*
2  * Copyright 2010 Tilera Corporation. All Rights Reserved.
3  *
4  *   This program is free software; you can redistribute it and/or
5  *   modify it under the terms of the GNU General Public License
6  *   as published by the Free Software Foundation, version 2.
7  *
8  *   This program is distributed in the hope that it will be useful, but
9  *   WITHOUT ANY WARRANTY; without even the implied warranty of
10  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
11  *   NON INFRINGEMENT.  See the GNU General Public License for
12  *   more details.
13  */
14
15 #ifndef _ASM_TILE_UACCESS_H
16 #define _ASM_TILE_UACCESS_H
17
18 /*
19  * User space memory access functions
20  */
21 #include <linux/mm.h>
22 #include <asm/processor.h>
23 #include <asm/page.h>
24
25 /*
26  * The fs value determines whether argument validity checking should be
27  * performed or not.  If get_fs() == USER_DS, checking is performed, with
28  * get_fs() == KERNEL_DS, checking is bypassed.
29  *
30  * For historical reasons, these macros are grossly misnamed.
31  */
32 #define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
33
34 #define KERNEL_DS       MAKE_MM_SEG(-1UL)
35 #define USER_DS         MAKE_MM_SEG(PAGE_OFFSET)
36
37 #define get_ds()        (KERNEL_DS)
38 #define get_fs()        (current_thread_info()->addr_limit)
39 #define set_fs(x)       (current_thread_info()->addr_limit = (x))
40
41 #define segment_eq(a, b) ((a).seg == (b).seg)
42
43 #ifndef __tilegx__
44 /*
45  * We could allow mapping all 16 MB at 0xfc000000, but we set up a
46  * special hack in arch_setup_additional_pages() to auto-create a mapping
47  * for the first 16 KB, and it would seem strange to have different
48  * user-accessible semantics for memory at 0xfc000000 and above 0xfc004000.
49  */
50 static inline int is_arch_mappable_range(unsigned long addr,
51                                          unsigned long size)
52 {
53         return (addr >= MEM_USER_INTRPT &&
54                 addr < (MEM_USER_INTRPT + INTRPT_SIZE) &&
55                 size <= (MEM_USER_INTRPT + INTRPT_SIZE) - addr);
56 }
57 #define is_arch_mappable_range is_arch_mappable_range
58 #else
59 #define is_arch_mappable_range(addr, size) 0
60 #endif
61
62 /*
63  * Note that using this definition ignores is_arch_mappable_range(),
64  * so on tilepro code that uses user_addr_max() is constrained not
65  * to reference the tilepro user-interrupt region.
66  */
67 #define user_addr_max() (current_thread_info()->addr_limit.seg)
68
69 /*
70  * Test whether a block of memory is a valid user space address.
71  * Returns 0 if the range is valid, nonzero otherwise.
72  */
73 int __range_ok(unsigned long addr, unsigned long size);
74
75 /**
76  * access_ok: - Checks if a user space pointer is valid
77  * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
78  *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
79  *        to write to a block, it is always safe to read from it.
80  * @addr: User space pointer to start of block to check
81  * @size: Size of block to check
82  *
83  * Context: User context only. This function may sleep if pagefaults are
84  *          enabled.
85  *
86  * Checks if a pointer to a block of memory in user space is valid.
87  *
88  * Returns true (nonzero) if the memory block may be valid, false (zero)
89  * if it is definitely invalid.
90  *
91  * Note that, depending on architecture, this function probably just
92  * checks that the pointer is in the user space range - after calling
93  * this function, memory access functions may still return -EFAULT.
94  */
95 #define access_ok(type, addr, size) ({ \
96         __chk_user_ptr(addr); \
97         likely(__range_ok((unsigned long)(addr), (size)) == 0); \
98 })
99
100 #include <asm/extable.h>
101
102 /*
103  * This is a type: either unsigned long, if the argument fits into
104  * that type, or otherwise unsigned long long.
105  */
106 #define __inttype(x) \
107         __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
108
109 /*
110  * Support macros for __get_user().
111  * Note that __get_user() and __put_user() assume proper alignment.
112  */
113
114 #ifdef __LP64__
115 #define _ASM_PTR        ".quad"
116 #define _ASM_ALIGN      ".align 8"
117 #else
118 #define _ASM_PTR        ".long"
119 #define _ASM_ALIGN      ".align 4"
120 #endif
121
122 #define __get_user_asm(OP, x, ptr, ret)                                 \
123         asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n"              \
124                      ".pushsection .fixup,\"ax\"\n"                     \
125                      "0: { movei %1, 0; movei %0, %3 }\n"               \
126                      "j 9f\n"                                           \
127                      ".section __ex_table,\"a\"\n"                      \
128                      _ASM_ALIGN "\n"                                    \
129                      _ASM_PTR " 1b, 0b\n"                               \
130                      ".popsection\n"                                    \
131                      "9:"                                               \
132                      : "=r" (ret), "=r" (x)                             \
133                      : "r" (ptr), "i" (-EFAULT))
134
135 #ifdef __tilegx__
136 #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
137 #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
138 #define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
139 #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
140 #else
141 #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
142 #define __get_user_2(x, ptr, ret) __get_user_asm(lh_u, x, ptr, ret)
143 #define __get_user_4(x, ptr, ret) __get_user_asm(lw, x, ptr, ret)
144 #ifdef __LITTLE_ENDIAN
145 #define __lo32(a, b) a
146 #define __hi32(a, b) b
147 #else
148 #define __lo32(a, b) b
149 #define __hi32(a, b) a
150 #endif
151 #define __get_user_8(x, ptr, ret)                                       \
152         ({                                                              \
153                 unsigned int __a, __b;                                  \
154                 asm volatile("1: { lw %1, %3; addi %2, %3, 4 }\n"       \
155                              "2: { lw %2, %2; movei %0, 0 }\n"          \
156                              ".pushsection .fixup,\"ax\"\n"             \
157                              "0: { movei %1, 0; movei %2, 0 }\n"        \
158                              "{ movei %0, %4; j 9f }\n"                 \
159                              ".section __ex_table,\"a\"\n"              \
160                              ".align 4\n"                               \
161                              ".word 1b, 0b\n"                           \
162                              ".word 2b, 0b\n"                           \
163                              ".popsection\n"                            \
164                              "9:"                                       \
165                              : "=r" (ret), "=r" (__a), "=&r" (__b)      \
166                              : "r" (ptr), "i" (-EFAULT));               \
167                 (x) = (__force __typeof(x))(__inttype(x))               \
168                         (((u64)__hi32(__a, __b) << 32) |                \
169                          __lo32(__a, __b));                             \
170         })
171 #endif
172
173 extern int __get_user_bad(void)
174   __attribute__((warning("sizeof __get_user argument not 1, 2, 4 or 8")));
175
176 /**
177  * __get_user: - Get a simple variable from user space, with less checking.
178  * @x:   Variable to store result.
179  * @ptr: Source address, in user space.
180  *
181  * Context: User context only. This function may sleep if pagefaults are
182  *          enabled.
183  *
184  * This macro copies a single simple variable from user space to kernel
185  * space.  It supports simple types like char and int, but not larger
186  * data types like structures or arrays.
187  *
188  * @ptr must have pointer-to-simple-variable type, and the result of
189  * dereferencing @ptr must be assignable to @x without a cast.
190  *
191  * Returns zero on success, or -EFAULT on error.
192  * On error, the variable @x is set to zero.
193  *
194  * Caller must check the pointer with access_ok() before calling this
195  * function.
196  */
197 #define __get_user(x, ptr)                                              \
198         ({                                                              \
199                 int __ret;                                              \
200                 typeof(x) _x;                                           \
201                 __chk_user_ptr(ptr);                                    \
202                 switch (sizeof(*(ptr))) {                               \
203                 case 1: __get_user_1(_x, ptr, __ret); break;            \
204                 case 2: __get_user_2(_x, ptr, __ret); break;            \
205                 case 4: __get_user_4(_x, ptr, __ret); break;            \
206                 case 8: __get_user_8(_x, ptr, __ret); break;            \
207                 default: __ret = __get_user_bad(); break;               \
208                 }                                                       \
209                 (x) = (typeof(*(ptr))) _x;                              \
210                 __ret;                                                  \
211         })
212
213 /* Support macros for __put_user(). */
214
215 #define __put_user_asm(OP, x, ptr, ret)                 \
216         asm volatile("1: {" #OP " %1, %2; movei %0, 0 }\n"              \
217                      ".pushsection .fixup,\"ax\"\n"                     \
218                      "0: { movei %0, %3; j 9f }\n"                      \
219                      ".section __ex_table,\"a\"\n"                      \
220                      _ASM_ALIGN "\n"                                    \
221                      _ASM_PTR " 1b, 0b\n"                               \
222                      ".popsection\n"                                    \
223                      "9:"                                               \
224                      : "=r" (ret)                                       \
225                      : "r" (ptr), "r" (x), "i" (-EFAULT))
226
227 #ifdef __tilegx__
228 #define __put_user_1(x, ptr, ret) __put_user_asm(st1, x, ptr, ret)
229 #define __put_user_2(x, ptr, ret) __put_user_asm(st2, x, ptr, ret)
230 #define __put_user_4(x, ptr, ret) __put_user_asm(st4, x, ptr, ret)
231 #define __put_user_8(x, ptr, ret) __put_user_asm(st, x, ptr, ret)
232 #else
233 #define __put_user_1(x, ptr, ret) __put_user_asm(sb, x, ptr, ret)
234 #define __put_user_2(x, ptr, ret) __put_user_asm(sh, x, ptr, ret)
235 #define __put_user_4(x, ptr, ret) __put_user_asm(sw, x, ptr, ret)
236 #define __put_user_8(x, ptr, ret)                                       \
237         ({                                                              \
238                 u64 __x = (__force __inttype(x))(x);                    \
239                 int __lo = (int) __x, __hi = (int) (__x >> 32);         \
240                 asm volatile("1: { sw %1, %2; addi %0, %1, 4 }\n"       \
241                              "2: { sw %0, %3; movei %0, 0 }\n"          \
242                              ".pushsection .fixup,\"ax\"\n"             \
243                              "0: { movei %0, %4; j 9f }\n"              \
244                              ".section __ex_table,\"a\"\n"              \
245                              ".align 4\n"                               \
246                              ".word 1b, 0b\n"                           \
247                              ".word 2b, 0b\n"                           \
248                              ".popsection\n"                            \
249                              "9:"                                       \
250                              : "=&r" (ret)                              \
251                              : "r" (ptr), "r" (__lo32(__lo, __hi)),     \
252                              "r" (__hi32(__lo, __hi)), "i" (-EFAULT));  \
253         })
254 #endif
255
256 extern int __put_user_bad(void)
257   __attribute__((warning("sizeof __put_user argument not 1, 2, 4 or 8")));
258
259 /**
260  * __put_user: - Write a simple value into user space, with less checking.
261  * @x:   Value to copy to user space.
262  * @ptr: Destination address, in user space.
263  *
264  * Context: User context only. This function may sleep if pagefaults are
265  *          enabled.
266  *
267  * This macro copies a single simple value from kernel space to user
268  * space.  It supports simple types like char and int, but not larger
269  * data types like structures or arrays.
270  *
271  * @ptr must have pointer-to-simple-variable type, and @x must be assignable
272  * to the result of dereferencing @ptr.
273  *
274  * Caller must check the pointer with access_ok() before calling this
275  * function.
276  *
277  * Returns zero on success, or -EFAULT on error.
278  */
279 #define __put_user(x, ptr)                                              \
280 ({                                                                      \
281         int __ret;                                                      \
282         typeof(*(ptr)) _x = (x);                                        \
283         __chk_user_ptr(ptr);                                            \
284         switch (sizeof(*(ptr))) {                                       \
285         case 1: __put_user_1(_x, ptr, __ret); break;                    \
286         case 2: __put_user_2(_x, ptr, __ret); break;                    \
287         case 4: __put_user_4(_x, ptr, __ret); break;                    \
288         case 8: __put_user_8(_x, ptr, __ret); break;                    \
289         default: __ret = __put_user_bad(); break;                       \
290         }                                                               \
291         __ret;                                                          \
292 })
293
294 /*
295  * The versions of get_user and put_user without initial underscores
296  * check the address of their arguments to make sure they are not
297  * in kernel space.
298  */
299 #define put_user(x, ptr)                                                \
300 ({                                                                      \
301         __typeof__(*(ptr)) __user *__Pu_addr = (ptr);                   \
302         access_ok(VERIFY_WRITE, (__Pu_addr), sizeof(*(__Pu_addr))) ?    \
303                 __put_user((x), (__Pu_addr)) :                          \
304                 -EFAULT;                                                \
305 })
306
307 #define get_user(x, ptr)                                                \
308 ({                                                                      \
309         __typeof__(*(ptr)) const __user *__Gu_addr = (ptr);             \
310         access_ok(VERIFY_READ, (__Gu_addr), sizeof(*(__Gu_addr))) ?     \
311                 __get_user((x), (__Gu_addr)) :                          \
312                 ((x) = 0, -EFAULT);                                     \
313 })
314
315 extern unsigned long __must_check
316 raw_copy_to_user(void __user *to, const void *from, unsigned long n);
317 extern unsigned long __must_check
318 raw_copy_from_user(void *to, const void __user *from, unsigned long n);
319 #define INLINE_COPY_FROM_USER
320 #define INLINE_COPY_TO_USER
321
322 #ifdef __tilegx__
323 extern unsigned long raw_copy_in_user(
324         void __user *to, const void __user *from, unsigned long n);
325 #endif
326
327
328 extern long strnlen_user(const char __user *str, long n);
329 extern long strncpy_from_user(char *dst, const char __user *src, long);
330
331 /**
332  * clear_user: - Zero a block of memory in user space.
333  * @mem:   Destination address, in user space.
334  * @len:   Number of bytes to zero.
335  *
336  * Zero a block of memory in user space.
337  *
338  * Returns number of bytes that could not be cleared.
339  * On success, this will be zero.
340  */
341 extern unsigned long clear_user_asm(void __user *mem, unsigned long len);
342 static inline unsigned long __must_check __clear_user(
343         void __user *mem, unsigned long len)
344 {
345         might_fault();
346         return clear_user_asm(mem, len);
347 }
348 static inline unsigned long __must_check clear_user(
349         void __user *mem, unsigned long len)
350 {
351         if (access_ok(VERIFY_WRITE, mem, len))
352                 return __clear_user(mem, len);
353         return len;
354 }
355
356 /**
357  * flush_user: - Flush a block of memory in user space from cache.
358  * @mem:   Destination address, in user space.
359  * @len:   Number of bytes to flush.
360  *
361  * Returns number of bytes that could not be flushed.
362  * On success, this will be zero.
363  */
364 extern unsigned long flush_user_asm(void __user *mem, unsigned long len);
365 static inline unsigned long __must_check __flush_user(
366         void __user *mem, unsigned long len)
367 {
368         int retval;
369
370         might_fault();
371         retval = flush_user_asm(mem, len);
372         mb_incoherent();
373         return retval;
374 }
375
376 static inline unsigned long __must_check flush_user(
377         void __user *mem, unsigned long len)
378 {
379         if (access_ok(VERIFY_WRITE, mem, len))
380                 return __flush_user(mem, len);
381         return len;
382 }
383
384 /**
385  * finv_user: - Flush-inval a block of memory in user space from cache.
386  * @mem:   Destination address, in user space.
387  * @len:   Number of bytes to invalidate.
388  *
389  * Returns number of bytes that could not be flush-invalidated.
390  * On success, this will be zero.
391  */
392 extern unsigned long finv_user_asm(void __user *mem, unsigned long len);
393 static inline unsigned long __must_check __finv_user(
394         void __user *mem, unsigned long len)
395 {
396         int retval;
397
398         might_fault();
399         retval = finv_user_asm(mem, len);
400         mb_incoherent();
401         return retval;
402 }
403 static inline unsigned long __must_check finv_user(
404         void __user *mem, unsigned long len)
405 {
406         if (access_ok(VERIFY_WRITE, mem, len))
407                 return __finv_user(mem, len);
408         return len;
409 }
410
411 #endif /* _ASM_TILE_UACCESS_H */