GNU Linux-libre 4.19.286-gnu1
[releases.git] / arch / um / kernel / trap.c
1 /*
2  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3  * Licensed under the GPL
4  */
5
6 #include <linux/mm.h>
7 #include <linux/sched/signal.h>
8 #include <linux/hardirq.h>
9 #include <linux/module.h>
10 #include <linux/uaccess.h>
11 #include <linux/sched/debug.h>
12 #include <asm/current.h>
13 #include <asm/pgtable.h>
14 #include <asm/tlbflush.h>
15 #include <arch.h>
16 #include <as-layout.h>
17 #include <kern_util.h>
18 #include <os.h>
19 #include <skas.h>
20
21 /*
22  * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
23  * segv().
24  */
25 int handle_page_fault(unsigned long address, unsigned long ip,
26                       int is_write, int is_user, int *code_out)
27 {
28         struct mm_struct *mm = current->mm;
29         struct vm_area_struct *vma;
30         pgd_t *pgd;
31         pud_t *pud;
32         pmd_t *pmd;
33         pte_t *pte;
34         int err = -EFAULT;
35         unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
36
37         *code_out = SEGV_MAPERR;
38
39         /*
40          * If the fault was with pagefaults disabled, don't take the fault, just
41          * fail.
42          */
43         if (faulthandler_disabled())
44                 goto out_nosemaphore;
45
46         if (is_user)
47                 flags |= FAULT_FLAG_USER;
48 retry:
49         down_read(&mm->mmap_sem);
50         vma = find_vma(mm, address);
51         if (!vma)
52                 goto out;
53         else if (vma->vm_start <= address)
54                 goto good_area;
55         else if (!(vma->vm_flags & VM_GROWSDOWN))
56                 goto out;
57         else if (is_user && !ARCH_IS_STACKGROW(address))
58                 goto out;
59         else if (expand_stack(vma, address))
60                 goto out;
61
62 good_area:
63         *code_out = SEGV_ACCERR;
64         if (is_write) {
65                 if (!(vma->vm_flags & VM_WRITE))
66                         goto out;
67                 flags |= FAULT_FLAG_WRITE;
68         } else {
69                 /* Don't require VM_READ|VM_EXEC for write faults! */
70                 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
71                         goto out;
72         }
73
74         do {
75                 vm_fault_t fault;
76
77                 fault = handle_mm_fault(vma, address, flags);
78
79                 if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
80                         goto out_nosemaphore;
81
82                 if (unlikely(fault & VM_FAULT_ERROR)) {
83                         if (fault & VM_FAULT_OOM) {
84                                 goto out_of_memory;
85                         } else if (fault & VM_FAULT_SIGSEGV) {
86                                 goto out;
87                         } else if (fault & VM_FAULT_SIGBUS) {
88                                 err = -EACCES;
89                                 goto out;
90                         }
91                         BUG();
92                 }
93                 if (flags & FAULT_FLAG_ALLOW_RETRY) {
94                         if (fault & VM_FAULT_MAJOR)
95                                 current->maj_flt++;
96                         else
97                                 current->min_flt++;
98                         if (fault & VM_FAULT_RETRY) {
99                                 flags &= ~FAULT_FLAG_ALLOW_RETRY;
100                                 flags |= FAULT_FLAG_TRIED;
101
102                                 goto retry;
103                         }
104                 }
105
106                 pgd = pgd_offset(mm, address);
107                 pud = pud_offset(pgd, address);
108                 pmd = pmd_offset(pud, address);
109                 pte = pte_offset_kernel(pmd, address);
110         } while (!pte_present(*pte));
111         err = 0;
112         /*
113          * The below warning was added in place of
114          *      pte_mkyoung(); if (is_write) pte_mkdirty();
115          * If it's triggered, we'd see normally a hang here (a clean pte is
116          * marked read-only to emulate the dirty bit).
117          * However, the generic code can mark a PTE writable but clean on a
118          * concurrent read fault, triggering this harmlessly. So comment it out.
119          */
120 #if 0
121         WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
122 #endif
123         flush_tlb_page(vma, address);
124 out:
125         up_read(&mm->mmap_sem);
126 out_nosemaphore:
127         return err;
128
129 out_of_memory:
130         /*
131          * We ran out of memory, call the OOM killer, and return the userspace
132          * (which will retry the fault, or kill us if we got oom-killed).
133          */
134         up_read(&mm->mmap_sem);
135         if (!is_user)
136                 goto out_nosemaphore;
137         pagefault_out_of_memory();
138         return 0;
139 }
140 EXPORT_SYMBOL(handle_page_fault);
141
142 static void show_segv_info(struct uml_pt_regs *regs)
143 {
144         struct task_struct *tsk = current;
145         struct faultinfo *fi = UPT_FAULTINFO(regs);
146
147         if (!unhandled_signal(tsk, SIGSEGV))
148                 return;
149
150         if (!printk_ratelimit())
151                 return;
152
153         printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
154                 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
155                 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
156                 (void *)UPT_IP(regs), (void *)UPT_SP(regs),
157                 fi->error_code);
158
159         print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
160         printk(KERN_CONT "\n");
161 }
162
163 static void bad_segv(struct faultinfo fi, unsigned long ip)
164 {
165         current->thread.arch.faultinfo = fi;
166         force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi),
167                         current);
168 }
169
170 void fatal_sigsegv(void)
171 {
172         force_sigsegv(SIGSEGV, current);
173         do_signal(&current->thread.regs);
174         /*
175          * This is to tell gcc that we're not returning - do_signal
176          * can, in general, return, but in this case, it's not, since
177          * we just got a fatal SIGSEGV queued.
178          */
179         os_dump_core();
180 }
181
182 /**
183  * segv_handler() - the SIGSEGV handler
184  * @sig:        the signal number
185  * @unused_si:  the signal info struct; unused in this handler
186  * @regs:       the ptrace register information
187  *
188  * The handler first extracts the faultinfo from the UML ptrace regs struct.
189  * If the userfault did not happen in an UML userspace process, bad_segv is called.
190  * Otherwise the signal did happen in a cloned userspace process, handle it.
191  */
192 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
193 {
194         struct faultinfo * fi = UPT_FAULTINFO(regs);
195
196         if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
197                 show_segv_info(regs);
198                 bad_segv(*fi, UPT_IP(regs));
199                 return;
200         }
201         segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
202 }
203
204 /*
205  * We give a *copy* of the faultinfo in the regs to segv.
206  * This must be done, since nesting SEGVs could overwrite
207  * the info in the regs. A pointer to the info then would
208  * give us bad data!
209  */
210 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
211                    struct uml_pt_regs *regs)
212 {
213         jmp_buf *catcher;
214         int si_code;
215         int err;
216         int is_write = FAULT_WRITE(fi);
217         unsigned long address = FAULT_ADDRESS(fi);
218
219         if (!is_user && regs)
220                 current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
221
222         if (!is_user && (address >= start_vm) && (address < end_vm)) {
223                 flush_tlb_kernel_vm();
224                 goto out;
225         }
226         else if (current->mm == NULL) {
227                 show_regs(container_of(regs, struct pt_regs, regs));
228                 panic("Segfault with no mm");
229         }
230         else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
231                 show_regs(container_of(regs, struct pt_regs, regs));
232                 panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
233                        address, ip);
234         }
235
236         if (SEGV_IS_FIXABLE(&fi))
237                 err = handle_page_fault(address, ip, is_write, is_user,
238                                         &si_code);
239         else {
240                 err = -EFAULT;
241                 /*
242                  * A thread accessed NULL, we get a fault, but CR2 is invalid.
243                  * This code is used in __do_copy_from_user() of TT mode.
244                  * XXX tt mode is gone, so maybe this isn't needed any more
245                  */
246                 address = 0;
247         }
248
249         catcher = current->thread.fault_catcher;
250         if (!err)
251                 goto out;
252         else if (catcher != NULL) {
253                 current->thread.fault_addr = (void *) address;
254                 UML_LONGJMP(catcher, 1);
255         }
256         else if (current->thread.fault_addr != NULL)
257                 panic("fault_addr set but no fault catcher");
258         else if (!is_user && arch_fixup(ip, regs))
259                 goto out;
260
261         if (!is_user) {
262                 show_regs(container_of(regs, struct pt_regs, regs));
263                 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
264                       address, ip);
265         }
266
267         show_segv_info(regs);
268
269         if (err == -EACCES) {
270                 current->thread.arch.faultinfo = fi;
271                 force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address,
272                                 current);
273         } else {
274                 BUG_ON(err != -EFAULT);
275                 current->thread.arch.faultinfo = fi;
276                 force_sig_fault(SIGSEGV, si_code, (void __user *) address,
277                                 current);
278         }
279
280 out:
281         if (regs)
282                 current->thread.segv_regs = NULL;
283
284         return 0;
285 }
286
287 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
288 {
289         int code, err;
290         if (!UPT_IS_USER(regs)) {
291                 if (sig == SIGBUS)
292                         printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
293                                "mount likely just ran out of space\n");
294                 panic("Kernel mode signal %d", sig);
295         }
296
297         arch_examine_signal(sig, regs);
298
299         /* Is the signal layout for the signal known?
300          * Signal data must be scrubbed to prevent information leaks.
301          */
302         code = si->si_code;
303         err = si->si_errno;
304         if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) {
305                 struct faultinfo *fi = UPT_FAULTINFO(regs);
306                 current->thread.arch.faultinfo = *fi;
307                 force_sig_fault(sig, code, (void __user *)FAULT_ADDRESS(*fi),
308                                 current);
309         } else {
310                 printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
311                        sig, code, err);
312                 force_sig(sig, current);
313         }
314 }
315
316 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
317 {
318         if (current->thread.fault_catcher != NULL)
319                 UML_LONGJMP(current->thread.fault_catcher, 1);
320         else
321                 relay_signal(sig, si, regs);
322 }
323
324 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
325 {
326         do_IRQ(WINCH_IRQ, regs);
327 }
328
329 void trap_init(void)
330 {
331 }