arch/unicore32/include/mach/regs-nand.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * PKUnity NAND Controller Registers
   4  */
   5 /*
   6  * ID Reg. 0 NAND_IDR0
   7  */
   8 #define NAND_IDR0       (PKUNITY_NAND_BASE + 0x0000)
   9 /*
  10  * ID Reg. 1 NAND_IDR1
  11  */
  12 #define NAND_IDR1       (PKUNITY_NAND_BASE + 0x0004)
  13 /*
  14  * ID Reg. 2 NAND_IDR2
  15  */
  16 #define NAND_IDR2       (PKUNITY_NAND_BASE + 0x0008)
  17 /*
  18  * ID Reg. 3 NAND_IDR3
  19  */
  20 #define NAND_IDR3       (PKUNITY_NAND_BASE + 0x000C)
  21 /*
  22  * Page Address Reg 0 NAND_PAR0
  23  */
  24 #define NAND_PAR0       (PKUNITY_NAND_BASE + 0x0010)
  25 /*
  26  * Page Address Reg 1 NAND_PAR1
  27  */
  28 #define NAND_PAR1       (PKUNITY_NAND_BASE + 0x0014)
  29 /*
  30  * Page Address Reg 2 NAND_PAR2
  31  */
  32 #define NAND_PAR2       (PKUNITY_NAND_BASE + 0x0018)
  33 /*
  34  * ECC Enable Reg NAND_ECCEN
  35  */
  36 #define NAND_ECCEN      (PKUNITY_NAND_BASE + 0x001C)
  37 /*
  38  * Buffer Reg NAND_BUF
  39  */
  40 #define NAND_BUF        (PKUNITY_NAND_BASE + 0x0020)
  41 /*
  42  * ECC Status Reg NAND_ECCSR
  43  */
  44 #define NAND_ECCSR      (PKUNITY_NAND_BASE + 0x0024)
  45 /*
  46  * Command Reg NAND_CMD
  47  */
  48 #define NAND_CMD        (PKUNITY_NAND_BASE + 0x0028)
  49 /*
  50  * DMA Configure Reg NAND_DMACR
  51  */
  52 #define NAND_DMACR      (PKUNITY_NAND_BASE + 0x002C)
  53 /*
  54  * Interrupt Reg NAND_IR
  55  */
  56 #define NAND_IR         (PKUNITY_NAND_BASE + 0x0030)
  57 /*
  58  * Interrupt Mask Reg NAND_IMR
  59  */
  60 #define NAND_IMR        (PKUNITY_NAND_BASE + 0x0034)
  61 /*
  62  * Chip Enable Reg NAND_CHIPEN
  63  */
  64 #define NAND_CHIPEN     (PKUNITY_NAND_BASE + 0x0038)
  65 /*
  66  * Address Reg NAND_ADDR
  67  */
  68 #define NAND_ADDR       (PKUNITY_NAND_BASE + 0x003C)
  69
  70 /*
  71  * Command bits NAND_CMD_CMD_MASK
  72  */
  73 #define NAND_CMD_CMD_MASK               FMASK(4, 4)
  74 #define NAND_CMD_CMD_READPAGE           FIELD(0x0, 4, 4)
  75 #define NAND_CMD_CMD_ERASEBLOCK         FIELD(0x6, 4, 4)
  76 #define NAND_CMD_CMD_READSTATUS         FIELD(0x7, 4, 4)
  77 #define NAND_CMD_CMD_WRITEPAGE          FIELD(0x8, 4, 4)
  78 #define NAND_CMD_CMD_READID             FIELD(0x9, 4, 4)
  79 #define NAND_CMD_CMD_RESET              FIELD(0xf, 4, 4)
  80