GNU Linux-libre 4.19.264-gnu1
[releases.git] / drivers / extcon / extcon-intel-cht-wc.c
1 /*
2  * Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC
3  * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
4  *
5  * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
6  * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms and conditions of the GNU General Public License,
10  * version 2, as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  */
17
18 #include <linux/extcon-provider.h>
19 #include <linux/interrupt.h>
20 #include <linux/kernel.h>
21 #include <linux/mfd/intel_soc_pmic.h>
22 #include <linux/module.h>
23 #include <linux/mod_devicetable.h>
24 #include <linux/platform_device.h>
25 #include <linux/regmap.h>
26 #include <linux/slab.h>
27
28 #define CHT_WC_PHYCTRL                  0x5e07
29
30 #define CHT_WC_CHGRCTRL0                0x5e16
31 #define CHT_WC_CHGRCTRL0_CHGRRESET      BIT(0)
32 #define CHT_WC_CHGRCTRL0_EMRGCHREN      BIT(1)
33 #define CHT_WC_CHGRCTRL0_EXTCHRDIS      BIT(2)
34 #define CHT_WC_CHGRCTRL0_SWCONTROL      BIT(3)
35 #define CHT_WC_CHGRCTRL0_TTLCK_MASK     BIT(4)
36 #define CHT_WC_CHGRCTRL0_CCSM_OFF_MASK  BIT(5)
37 #define CHT_WC_CHGRCTRL0_DBPOFF_MASK    BIT(6)
38 #define CHT_WC_CHGRCTRL0_WDT_NOKICK     BIT(7)
39
40 #define CHT_WC_CHGRCTRL1                0x5e17
41
42 #define CHT_WC_USBSRC                   0x5e29
43 #define CHT_WC_USBSRC_STS_MASK          GENMASK(1, 0)
44 #define CHT_WC_USBSRC_STS_SUCCESS       2
45 #define CHT_WC_USBSRC_STS_FAIL          3
46 #define CHT_WC_USBSRC_TYPE_SHIFT        2
47 #define CHT_WC_USBSRC_TYPE_MASK         GENMASK(5, 2)
48 #define CHT_WC_USBSRC_TYPE_NONE         0
49 #define CHT_WC_USBSRC_TYPE_SDP          1
50 #define CHT_WC_USBSRC_TYPE_DCP          2
51 #define CHT_WC_USBSRC_TYPE_CDP          3
52 #define CHT_WC_USBSRC_TYPE_ACA          4
53 #define CHT_WC_USBSRC_TYPE_SE1          5
54 #define CHT_WC_USBSRC_TYPE_MHL          6
55 #define CHT_WC_USBSRC_TYPE_FLOAT_DP_DN  7
56 #define CHT_WC_USBSRC_TYPE_OTHER        8
57 #define CHT_WC_USBSRC_TYPE_DCP_EXTPHY   9
58
59 #define CHT_WC_PWRSRC_IRQ               0x6e03
60 #define CHT_WC_PWRSRC_IRQ_MASK          0x6e0f
61 #define CHT_WC_PWRSRC_STS               0x6e1e
62 #define CHT_WC_PWRSRC_VBUS              BIT(0)
63 #define CHT_WC_PWRSRC_DC                BIT(1)
64 #define CHT_WC_PWRSRC_BAT               BIT(2)
65 #define CHT_WC_PWRSRC_ID_GND            BIT(3)
66 #define CHT_WC_PWRSRC_ID_FLOAT          BIT(4)
67
68 #define CHT_WC_VBUS_GPIO_CTLO           0x6e2d
69 #define CHT_WC_VBUS_GPIO_CTLO_OUTPUT    BIT(0)
70 #define CHT_WC_VBUS_GPIO_CTLO_DRV_OD    BIT(4)
71 #define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT   BIT(5)
72
73 enum cht_wc_usb_id {
74         USB_ID_OTG,
75         USB_ID_GND,
76         USB_ID_FLOAT,
77         USB_RID_A,
78         USB_RID_B,
79         USB_RID_C,
80 };
81
82 enum cht_wc_mux_select {
83         MUX_SEL_PMIC = 0,
84         MUX_SEL_SOC,
85 };
86
87 static const unsigned int cht_wc_extcon_cables[] = {
88         EXTCON_USB,
89         EXTCON_USB_HOST,
90         EXTCON_CHG_USB_SDP,
91         EXTCON_CHG_USB_CDP,
92         EXTCON_CHG_USB_DCP,
93         EXTCON_CHG_USB_ACA,
94         EXTCON_NONE,
95 };
96
97 struct cht_wc_extcon_data {
98         struct device *dev;
99         struct regmap *regmap;
100         struct extcon_dev *edev;
101         unsigned int previous_cable;
102         bool usb_host;
103 };
104
105 static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
106 {
107         if (pwrsrc_sts & CHT_WC_PWRSRC_ID_GND)
108                 return USB_ID_GND;
109         if (pwrsrc_sts & CHT_WC_PWRSRC_ID_FLOAT)
110                 return USB_ID_FLOAT;
111
112         /*
113          * Once we have iio support for the gpadc we should read the USBID
114          * gpadc channel here and determine ACA role based on that.
115          */
116         return USB_ID_FLOAT;
117 }
118
119 static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
120                                      bool ignore_errors)
121 {
122         int ret, usbsrc, status;
123         unsigned long timeout;
124
125         /* Charger detection can take upto 600ms, wait 800ms max. */
126         timeout = jiffies + msecs_to_jiffies(800);
127         do {
128                 ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc);
129                 if (ret) {
130                         dev_err(ext->dev, "Error reading usbsrc: %d\n", ret);
131                         return ret;
132                 }
133
134                 status = usbsrc & CHT_WC_USBSRC_STS_MASK;
135                 if (status == CHT_WC_USBSRC_STS_SUCCESS ||
136                     status == CHT_WC_USBSRC_STS_FAIL)
137                         break;
138
139                 msleep(50); /* Wait a bit before retrying */
140         } while (time_before(jiffies, timeout));
141
142         if (status != CHT_WC_USBSRC_STS_SUCCESS) {
143                 if (ignore_errors)
144                         return EXTCON_CHG_USB_SDP; /* Save fallback */
145
146                 if (status == CHT_WC_USBSRC_STS_FAIL)
147                         dev_warn(ext->dev, "Could not detect charger type\n");
148                 else
149                         dev_warn(ext->dev, "Timeout detecting charger type\n");
150                 return EXTCON_CHG_USB_SDP; /* Save fallback */
151         }
152
153         usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT;
154         switch (usbsrc) {
155         default:
156                 dev_warn(ext->dev,
157                         "Unhandled charger type %d, defaulting to SDP\n",
158                          ret);
159                 return EXTCON_CHG_USB_SDP;
160         case CHT_WC_USBSRC_TYPE_SDP:
161         case CHT_WC_USBSRC_TYPE_FLOAT_DP_DN:
162         case CHT_WC_USBSRC_TYPE_OTHER:
163                 return EXTCON_CHG_USB_SDP;
164         case CHT_WC_USBSRC_TYPE_CDP:
165                 return EXTCON_CHG_USB_CDP;
166         case CHT_WC_USBSRC_TYPE_DCP:
167         case CHT_WC_USBSRC_TYPE_DCP_EXTPHY:
168         case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */
169                 return EXTCON_CHG_USB_DCP;
170         case CHT_WC_USBSRC_TYPE_ACA:
171                 return EXTCON_CHG_USB_ACA;
172         }
173 }
174
175 static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state)
176 {
177         int ret;
178
179         ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state);
180         if (ret)
181                 dev_err(ext->dev, "Error writing phyctrl: %d\n", ret);
182 }
183
184 static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
185                                        bool enable)
186 {
187         int ret, val;
188
189         /*
190          * The 5V boost converter is enabled through a gpio on the PMIC, since
191          * there currently is no gpio driver we access the gpio reg directly.
192          */
193         val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT;
194         if (enable)
195                 val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT;
196
197         ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val);
198         if (ret)
199                 dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
200 }
201
202 /* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
203 static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
204                                     unsigned int cable, bool state)
205 {
206         extcon_set_state_sync(ext->edev, cable, state);
207         if (cable == EXTCON_CHG_USB_SDP)
208                 extcon_set_state_sync(ext->edev, EXTCON_USB, state);
209 }
210
211 static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
212 {
213         int ret, pwrsrc_sts, id;
214         unsigned int cable = EXTCON_NONE;
215         /* Ignore errors in host mode, as the 5v boost converter is on then */
216         bool ignore_get_charger_errors = ext->usb_host;
217
218         ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
219         if (ret) {
220                 dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret);
221                 return;
222         }
223
224         id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
225         if (id == USB_ID_GND) {
226                 /* The 5v boost causes a false VBUS / SDP detect, skip */
227                 goto charger_det_done;
228         }
229
230         /* Plugged into a host/charger or not connected? */
231         if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
232                 /* Route D+ and D- to PMIC for future charger detection */
233                 cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
234                 goto set_state;
235         }
236
237         ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
238         if (ret >= 0)
239                 cable = ret;
240
241 charger_det_done:
242         /* Route D+ and D- to SoC for the host or gadget controller */
243         cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC);
244
245 set_state:
246         if (cable != ext->previous_cable) {
247                 cht_wc_extcon_set_state(ext, cable, true);
248                 cht_wc_extcon_set_state(ext, ext->previous_cable, false);
249                 ext->previous_cable = cable;
250         }
251
252         ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
253         extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
254 }
255
256 static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
257 {
258         struct cht_wc_extcon_data *ext = data;
259         int ret, irqs;
260
261         ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs);
262         if (ret) {
263                 dev_err(ext->dev, "Error reading irqs: %d\n", ret);
264                 return IRQ_NONE;
265         }
266
267         cht_wc_extcon_pwrsrc_event(ext);
268
269         ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs);
270         if (ret) {
271                 dev_err(ext->dev, "Error writing irqs: %d\n", ret);
272                 return IRQ_NONE;
273         }
274
275         return IRQ_HANDLED;
276 }
277
278 static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable)
279 {
280         int ret, mask, val;
281
282         mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF_MASK;
283         val = enable ? mask : 0;
284         ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val);
285         if (ret)
286                 dev_err(ext->dev, "Error setting sw control: %d\n", ret);
287
288         return ret;
289 }
290
291 static int cht_wc_extcon_probe(struct platform_device *pdev)
292 {
293         struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
294         struct cht_wc_extcon_data *ext;
295         int irq, ret;
296
297         irq = platform_get_irq(pdev, 0);
298         if (irq < 0)
299                 return irq;
300
301         ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL);
302         if (!ext)
303                 return -ENOMEM;
304
305         ext->dev = &pdev->dev;
306         ext->regmap = pmic->regmap;
307         ext->previous_cable = EXTCON_NONE;
308
309         /* Initialize extcon device */
310         ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables);
311         if (IS_ERR(ext->edev))
312                 return PTR_ERR(ext->edev);
313
314         /*
315          * When a host-cable is detected the BIOS enables an external 5v boost
316          * converter to power connected devices there are 2 problems with this:
317          * 1) This gets seen by the external battery charger as a valid Vbus
318          *    supply and it then tries to feed Vsys from this creating a
319          *    feedback loop which causes aprox. 300 mA extra battery drain
320          *    (and unless we drive the external-charger-disable pin high it
321          *    also tries to charge the battery causing even more feedback).
322          * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
323          * Since the external battery charger has its own 5v boost converter
324          * which does not have these issues, we simply turn the separate
325          * external 5v boost converter off and leave it off entirely.
326          */
327         cht_wc_extcon_set_5v_boost(ext, false);
328
329         /* Enable sw control */
330         ret = cht_wc_extcon_sw_control(ext, true);
331         if (ret)
332                 return ret;
333
334         /* Register extcon device */
335         ret = devm_extcon_dev_register(ext->dev, ext->edev);
336         if (ret) {
337                 dev_err(ext->dev, "Error registering extcon device: %d\n", ret);
338                 goto disable_sw_control;
339         }
340
341         /* Route D+ and D- to PMIC for initial charger detection */
342         cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
343
344         /* Get initial state */
345         cht_wc_extcon_pwrsrc_event(ext);
346
347         ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr,
348                                         IRQF_ONESHOT, pdev->name, ext);
349         if (ret) {
350                 dev_err(ext->dev, "Error requesting interrupt: %d\n", ret);
351                 goto disable_sw_control;
352         }
353
354         /* Unmask irqs */
355         ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK,
356                            (int)~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_ID_GND |
357                                   CHT_WC_PWRSRC_ID_FLOAT));
358         if (ret) {
359                 dev_err(ext->dev, "Error writing irq-mask: %d\n", ret);
360                 goto disable_sw_control;
361         }
362
363         platform_set_drvdata(pdev, ext);
364
365         return 0;
366
367 disable_sw_control:
368         cht_wc_extcon_sw_control(ext, false);
369         return ret;
370 }
371
372 static int cht_wc_extcon_remove(struct platform_device *pdev)
373 {
374         struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev);
375
376         cht_wc_extcon_sw_control(ext, false);
377
378         return 0;
379 }
380
381 static const struct platform_device_id cht_wc_extcon_table[] = {
382         { .name = "cht_wcove_pwrsrc" },
383         {},
384 };
385 MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table);
386
387 static struct platform_driver cht_wc_extcon_driver = {
388         .probe = cht_wc_extcon_probe,
389         .remove = cht_wc_extcon_remove,
390         .id_table = cht_wc_extcon_table,
391         .driver = {
392                 .name = "cht_wcove_pwrsrc",
393         },
394 };
395 module_platform_driver(cht_wc_extcon_driver);
396
397 MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver");
398 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
399 MODULE_LICENSE("GPL v2");