drivers/gpu/drm/gma500/cdv_intel_lvds.c

   1 /*
   2  * Copyright © 2006-2011 Intel Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Authors:
  18  *      Eric Anholt <eric@anholt.net>
  19  *      Dave Airlie <airlied@linux.ie>
  20  *      Jesse Barnes <jesse.barnes@intel.com>
  21  */
  22
  23 #include <linux/i2c.h>
  24 #include <linux/dmi.h>
  25 #include <drm/drmP.h>
  26
  27 #include "intel_bios.h"
  28 #include "psb_drv.h"
  29 #include "psb_intel_drv.h"
  30 #include "psb_intel_reg.h"
  31 #include "power.h"
  32 #include <linux/pm_runtime.h>
  33 #include "cdv_device.h"
  34
  35 /**
  36  * LVDS I2C backlight control macros
  37  */
  38 #define BRIGHTNESS_MAX_LEVEL 100
  39 #define BRIGHTNESS_MASK 0xFF
  40 #define BLC_I2C_TYPE    0x01
  41 #define BLC_PWM_TYPT    0x02
  42
  43 #define BLC_POLARITY_NORMAL 0
  44 #define BLC_POLARITY_INVERSE 1
  45
  46 #define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
  47 #define PSB_BLC_MIN_PWM_REG_FREQ        (0x2)
  48 #define PSB_BLC_PWM_PRECISION_FACTOR    (10)
  49 #define PSB_BACKLIGHT_PWM_CTL_SHIFT     (16)
  50 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
  51
  52 struct cdv_intel_lvds_priv {
  53         /**
  54          * Saved LVDO output states
  55          */
  56         uint32_t savePP_ON;
  57         uint32_t savePP_OFF;
  58         uint32_t saveLVDS;
  59         uint32_t savePP_CONTROL;
  60         uint32_t savePP_CYCLE;
  61         uint32_t savePFIT_CONTROL;
  62         uint32_t savePFIT_PGM_RATIOS;
  63         uint32_t saveBLC_PWM_CTL;
  64 };
  65
  66 /*
  67  * Returns the maximum level of the backlight duty cycle field.
  68  */
  69 static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
  70 {
  71         struct drm_psb_private *dev_priv = dev->dev_private;
  72         u32 retval;
  73
  74         if (gma_power_begin(dev, false)) {
  75                 retval = ((REG_READ(BLC_PWM_CTL) &
  76                           BACKLIGHT_MODULATION_FREQ_MASK) >>
  77                           BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
  78
  79                 gma_power_end(dev);
  80         } else
  81                 retval = ((dev_priv->regs.saveBLC_PWM_CTL &
  82                           BACKLIGHT_MODULATION_FREQ_MASK) >>
  83                           BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
  84
  85         return retval;
  86 }
  87
  88 #if 0
  89 /*
  90  * Set LVDS backlight level by I2C command
  91  */
  92 static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
  93                                         unsigned int level)
  94 {
  95         struct drm_psb_private *dev_priv = dev->dev_private;
  96         struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
  97         u8 out_buf[2];
  98         unsigned int blc_i2c_brightness;
  99
 100         struct i2c_msg msgs[] = {
 101                 {
 102                         .addr = lvds_i2c_bus->slave_addr,
 103                         .flags = 0,
 104                         .len = 2,
 105                         .buf = out_buf,
 106                 }
 107         };
 108
 109         blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
 110                              BRIGHTNESS_MASK /
 111                              BRIGHTNESS_MAX_LEVEL);
 112
 113         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 114                 blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
 115
 116         out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
 117         out_buf[1] = (u8)blc_i2c_brightness;
 118
 119         if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
 120                 return 0;
 121
 122         DRM_ERROR("I2C transfer error\n");
 123         return -1;
 124 }
 125
 126
 127 static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
 128 {
 129         struct drm_psb_private *dev_priv = dev->dev_private;
 130
 131         u32 max_pwm_blc;
 132         u32 blc_pwm_duty_cycle;
 133
 134         max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
 135
 136         /*BLC_PWM_CTL Should be initiated while backlight device init*/
 137         BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
 138
 139         blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
 140
 141         if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
 142                 blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
 143
 144         blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
 145         REG_WRITE(BLC_PWM_CTL,
 146                   (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
 147                   (blc_pwm_duty_cycle));
 148
 149         return 0;
 150 }
 151
 152 /*
 153  * Set LVDS backlight level either by I2C or PWM
 154  */
 155 void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
 156 {
 157         struct drm_psb_private *dev_priv = dev->dev_private;
 158
 159         if (!dev_priv->lvds_bl) {
 160                 DRM_ERROR("NO LVDS Backlight Info\n");
 161                 return;
 162         }
 163
 164         if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
 165                 cdv_lvds_i2c_set_brightness(dev, level);
 166         else
 167                 cdv_lvds_pwm_set_brightness(dev, level);
 168 }
 169 #endif
 170
 171 /**
 172  * Sets the backlight level.
 173  *
 174  * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
 175  */
 176 static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
 177 {
 178         struct drm_psb_private *dev_priv = dev->dev_private;
 179         u32 blc_pwm_ctl;
 180
 181         if (gma_power_begin(dev, false)) {
 182                 blc_pwm_ctl =
 183                         REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
 184                 REG_WRITE(BLC_PWM_CTL,
 185                                 (blc_pwm_ctl |
 186                                 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
 187                 gma_power_end(dev);
 188         } else {
 189                 blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
 190                                 ~BACKLIGHT_DUTY_CYCLE_MASK;
 191                 dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
 192                                         (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
 193         }
 194 }
 195
 196 /**
 197  * Sets the power state for the panel.
 198  */
 199 static void cdv_intel_lvds_set_power(struct drm_device *dev,
 200                                      struct drm_encoder *encoder, bool on)
 201 {
 202         struct drm_psb_private *dev_priv = dev->dev_private;
 203         u32 pp_status;
 204
 205         if (!gma_power_begin(dev, true))
 206                 return;
 207
 208         if (on) {
 209                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
 210                           POWER_TARGET_ON);
 211                 do {
 212                         pp_status = REG_READ(PP_STATUS);
 213                 } while ((pp_status & PP_ON) == 0);
 214
 215                 cdv_intel_lvds_set_backlight(dev,
 216                                 dev_priv->mode_dev.backlight_duty_cycle);
 217         } else {
 218                 cdv_intel_lvds_set_backlight(dev, 0);
 219
 220                 REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
 221                           ~POWER_TARGET_ON);
 222                 do {
 223                         pp_status = REG_READ(PP_STATUS);
 224                 } while (pp_status & PP_ON);
 225         }
 226         gma_power_end(dev);
 227 }
 228
 229 static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
 230 {
 231         struct drm_device *dev = encoder->dev;
 232         if (mode == DRM_MODE_DPMS_ON)
 233                 cdv_intel_lvds_set_power(dev, encoder, true);
 234         else
 235                 cdv_intel_lvds_set_power(dev, encoder, false);
 236         /* XXX: We never power down the LVDS pairs. */
 237 }
 238
 239 static void cdv_intel_lvds_save(struct drm_connector *connector)
 240 {
 241 }
 242
 243 static void cdv_intel_lvds_restore(struct drm_connector *connector)
 244 {
 245 }
 246
 247 static int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
 248                               struct drm_display_mode *mode)
 249 {
 250         struct drm_device *dev = connector->dev;
 251         struct drm_psb_private *dev_priv = dev->dev_private;
 252         struct drm_display_mode *fixed_mode =
 253                                         dev_priv->mode_dev.panel_fixed_mode;
 254
 255         /* just in case */
 256         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 257                 return MODE_NO_DBLESCAN;
 258
 259         /* just in case */
 260         if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 261                 return MODE_NO_INTERLACE;
 262
 263         if (fixed_mode) {
 264                 if (mode->hdisplay > fixed_mode->hdisplay)
 265                         return MODE_PANEL;
 266                 if (mode->vdisplay > fixed_mode->vdisplay)
 267                         return MODE_PANEL;
 268         }
 269         return MODE_OK;
 270 }
 271
 272 static bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
 273                                   const struct drm_display_mode *mode,
 274                                   struct drm_display_mode *adjusted_mode)
 275 {
 276         struct drm_device *dev = encoder->dev;
 277         struct drm_psb_private *dev_priv = dev->dev_private;
 278         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 279         struct drm_encoder *tmp_encoder;
 280         struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
 281
 282         /* Should never happen!! */
 283         list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
 284                             head) {
 285                 if (tmp_encoder != encoder
 286                     && tmp_encoder->crtc == encoder->crtc) {
 287                         pr_err("Can't enable LVDS and another encoder on the same pipe\n");
 288                         return false;
 289                 }
 290         }
 291
 292         /*
 293          * If we have timings from the BIOS for the panel, put them in
 294          * to the adjusted mode.  The CRTC will be set up for this mode,
 295          * with the panel scaling set up to source from the H/VDisplay
 296          * of the original mode.
 297          */
 298         if (panel_fixed_mode != NULL) {
 299                 adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
 300                 adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
 301                 adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
 302                 adjusted_mode->htotal = panel_fixed_mode->htotal;
 303                 adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
 304                 adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
 305                 adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
 306                 adjusted_mode->vtotal = panel_fixed_mode->vtotal;
 307                 adjusted_mode->clock = panel_fixed_mode->clock;
 308                 drm_mode_set_crtcinfo(adjusted_mode,
 309                                       CRTC_INTERLACE_HALVE_V);
 310         }
 311
 312         /*
 313          * XXX: It would be nice to support lower refresh rates on the
 314          * panels to reduce power consumption, and perhaps match the
 315          * user's requested refresh rate.
 316          */
 317
 318         return true;
 319 }
 320
 321 static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
 322 {
 323         struct drm_device *dev = encoder->dev;
 324         struct drm_psb_private *dev_priv = dev->dev_private;
 325         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 326
 327         if (!gma_power_begin(dev, true))
 328                 return;
 329
 330         mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
 331         mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
 332                                           BACKLIGHT_DUTY_CYCLE_MASK);
 333
 334         cdv_intel_lvds_set_power(dev, encoder, false);
 335
 336         gma_power_end(dev);
 337 }
 338
 339 static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
 340 {
 341         struct drm_device *dev = encoder->dev;
 342         struct drm_psb_private *dev_priv = dev->dev_private;
 343         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 344
 345         if (mode_dev->backlight_duty_cycle == 0)
 346                 mode_dev->backlight_duty_cycle =
 347                     cdv_intel_lvds_get_max_backlight(dev);
 348
 349         cdv_intel_lvds_set_power(dev, encoder, true);
 350 }
 351
 352 static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
 353                                 struct drm_display_mode *mode,
 354                                 struct drm_display_mode *adjusted_mode)
 355 {
 356         struct drm_device *dev = encoder->dev;
 357         struct drm_psb_private *dev_priv = dev->dev_private;
 358         struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
 359         u32 pfit_control;
 360
 361         /*
 362          * The LVDS pin pair will already have been turned on in the
 363          * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
 364          * settings.
 365          */
 366
 367         /*
 368          * Enable automatic panel scaling so that non-native modes fill the
 369          * screen.  Should be enabled before the pipe is enabled, according to
 370          * register description and PRM.
 371          */
 372         if (mode->hdisplay != adjusted_mode->hdisplay ||
 373             mode->vdisplay != adjusted_mode->vdisplay)
 374                 pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
 375                                 HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
 376                                 HORIZ_INTERP_BILINEAR);
 377         else
 378                 pfit_control = 0;
 379
 380         pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT;
 381
 382         if (dev_priv->lvds_dither)
 383                 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 384
 385         REG_WRITE(PFIT_CONTROL, pfit_control);
 386 }
 387
 388 /**
 389  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 390  */
 391 static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
 392 {
 393         struct drm_device *dev = connector->dev;
 394         struct drm_psb_private *dev_priv = dev->dev_private;
 395         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 396         struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
 397         int ret;
 398
 399         ret = psb_intel_ddc_get_modes(connector, &gma_encoder->i2c_bus->adapter);
 400
 401         if (ret)
 402                 return ret;
 403
 404         if (mode_dev->panel_fixed_mode != NULL) {
 405                 struct drm_display_mode *mode =
 406                     drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
 407                 drm_mode_probed_add(connector, mode);
 408                 return 1;
 409         }
 410
 411         return 0;
 412 }
 413
 414 /**
 415  * cdv_intel_lvds_destroy - unregister and free LVDS structures
 416  * @connector: connector to free
 417  *
 418  * Unregister the DDC bus for this connector then free the driver private
 419  * structure.
 420  */
 421 static void cdv_intel_lvds_destroy(struct drm_connector *connector)
 422 {
 423         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 424
 425         psb_intel_i2c_destroy(gma_encoder->i2c_bus);
 426         drm_connector_unregister(connector);
 427         drm_connector_cleanup(connector);
 428         kfree(connector);
 429 }
 430
 431 static int cdv_intel_lvds_set_property(struct drm_connector *connector,
 432                                        struct drm_property *property,
 433                                        uint64_t value)
 434 {
 435         struct drm_encoder *encoder = connector->encoder;
 436
 437         if (!strcmp(property->name, "scaling mode") && encoder) {
 438                 struct gma_crtc *crtc = to_gma_crtc(encoder->crtc);
 439                 uint64_t curValue;
 440
 441                 if (!crtc)
 442                         return -1;
 443
 444                 switch (value) {
 445                 case DRM_MODE_SCALE_FULLSCREEN:
 446                         break;
 447                 case DRM_MODE_SCALE_NO_SCALE:
 448                         break;
 449                 case DRM_MODE_SCALE_ASPECT:
 450                         break;
 451                 default:
 452                         return -1;
 453                 }
 454
 455                 if (drm_object_property_get_value(&connector->base,
 456                                                      property,
 457                                                      &curValue))
 458                         return -1;
 459
 460                 if (curValue == value)
 461                         return 0;
 462
 463                 if (drm_object_property_set_value(&connector->base,
 464                                                         property,
 465                                                         value))
 466                         return -1;
 467
 468                 if (crtc->saved_mode.hdisplay != 0 &&
 469                     crtc->saved_mode.vdisplay != 0) {
 470                         if (!drm_crtc_helper_set_mode(encoder->crtc,
 471                                                       &crtc->saved_mode,
 472                                                       encoder->crtc->x,
 473                                                       encoder->crtc->y,
 474                                                       encoder->crtc->primary->fb))
 475                                 return -1;
 476                 }
 477         } else if (!strcmp(property->name, "backlight") && encoder) {
 478                 if (drm_object_property_set_value(&connector->base,
 479                                                         property,
 480                                                         value))
 481                         return -1;
 482                 else
 483                         gma_backlight_set(encoder->dev, value);
 484         } else if (!strcmp(property->name, "DPMS") && encoder) {
 485                 const struct drm_encoder_helper_funcs *helpers =
 486                                         encoder->helper_private;
 487                 helpers->dpms(encoder, value);
 488         }
 489         return 0;
 490 }
 491
 492 static const struct drm_encoder_helper_funcs
 493                                         cdv_intel_lvds_helper_funcs = {
 494         .dpms = cdv_intel_lvds_encoder_dpms,
 495         .mode_fixup = cdv_intel_lvds_mode_fixup,
 496         .prepare = cdv_intel_lvds_prepare,
 497         .mode_set = cdv_intel_lvds_mode_set,
 498         .commit = cdv_intel_lvds_commit,
 499 };
 500
 501 static const struct drm_connector_helper_funcs
 502                                 cdv_intel_lvds_connector_helper_funcs = {
 503         .get_modes = cdv_intel_lvds_get_modes,
 504         .mode_valid = cdv_intel_lvds_mode_valid,
 505         .best_encoder = gma_best_encoder,
 506 };
 507
 508 static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
 509         .dpms = drm_helper_connector_dpms,
 510         .fill_modes = drm_helper_probe_single_connector_modes,
 511         .set_property = cdv_intel_lvds_set_property,
 512         .destroy = cdv_intel_lvds_destroy,
 513 };
 514
 515
 516 static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
 517 {
 518         drm_encoder_cleanup(encoder);
 519 }
 520
 521 static const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
 522         .destroy = cdv_intel_lvds_enc_destroy,
 523 };
 524
 525 /*
 526  * Enumerate the child dev array parsed from VBT to check whether
 527  * the LVDS is present.
 528  * If it is present, return 1.
 529  * If it is not present, return false.
 530  * If no child dev is parsed from VBT, it assumes that the LVDS is present.
 531  */
 532 static bool lvds_is_present_in_vbt(struct drm_device *dev,
 533                                    u8 *i2c_pin)
 534 {
 535         struct drm_psb_private *dev_priv = dev->dev_private;
 536         int i;
 537
 538         if (!dev_priv->child_dev_num)
 539                 return true;
 540
 541         for (i = 0; i < dev_priv->child_dev_num; i++) {
 542                 struct child_device_config *child = dev_priv->child_dev + i;
 543
 544                 /* If the device type is not LFP, continue.
 545                  * We have to check both the new identifiers as well as the
 546                  * old for compatibility with some BIOSes.
 547                  */
 548                 if (child->device_type != DEVICE_TYPE_INT_LFP &&
 549                     child->device_type != DEVICE_TYPE_LFP)
 550                         continue;
 551
 552                 if (child->i2c_pin)
 553                     *i2c_pin = child->i2c_pin;
 554
 555                 /* However, we cannot trust the BIOS writers to populate
 556                  * the VBT correctly.  Since LVDS requires additional
 557                  * information from AIM blocks, a non-zero addin offset is
 558                  * a good indicator that the LVDS is actually present.
 559                  */
 560                 if (child->addin_offset)
 561                         return true;
 562
 563                 /* But even then some BIOS writers perform some black magic
 564                  * and instantiate the device without reference to any
 565                  * additional data.  Trust that if the VBT was written into
 566                  * the OpRegion then they have validated the LVDS's existence.
 567                  */
 568                 if (dev_priv->opregion.vbt)
 569                         return true;
 570         }
 571
 572         return false;
 573 }
 574
 575 /**
 576  * cdv_intel_lvds_init - setup LVDS connectors on this device
 577  * @dev: drm device
 578  *
 579  * Create the connector, register the LVDS DDC bus, and try to figure out what
 580  * modes we can display on the LVDS panel (if present).
 581  */
 582 void cdv_intel_lvds_init(struct drm_device *dev,
 583                      struct psb_intel_mode_device *mode_dev)
 584 {
 585         struct gma_encoder *gma_encoder;
 586         struct gma_connector *gma_connector;
 587         struct cdv_intel_lvds_priv *lvds_priv;
 588         struct drm_connector *connector;
 589         struct drm_encoder *encoder;
 590         struct drm_display_mode *scan;
 591         struct drm_crtc *crtc;
 592         struct drm_psb_private *dev_priv = dev->dev_private;
 593         u32 lvds;
 594         int pipe;
 595         u8 pin;
 596
 597         if (!dev_priv->lvds_enabled_in_vbt)
 598                 return;
 599
 600         pin = GMBUS_PORT_PANEL;
 601         if (!lvds_is_present_in_vbt(dev, &pin)) {
 602                 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
 603                 return;
 604         }
 605
 606         gma_encoder = kzalloc(sizeof(struct gma_encoder),
 607                                     GFP_KERNEL);
 608         if (!gma_encoder)
 609                 return;
 610
 611         gma_connector = kzalloc(sizeof(struct gma_connector),
 612                                       GFP_KERNEL);
 613         if (!gma_connector)
 614                 goto failed_connector;
 615
 616         lvds_priv = kzalloc(sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
 617         if (!lvds_priv)
 618                 goto failed_lvds_priv;
 619
 620         gma_encoder->dev_priv = lvds_priv;
 621
 622         connector = &gma_connector->base;
 623         gma_connector->save = cdv_intel_lvds_save;
 624         gma_connector->restore = cdv_intel_lvds_restore;
 625         encoder = &gma_encoder->base;
 626
 627
 628         drm_connector_init(dev, connector,
 629                            &cdv_intel_lvds_connector_funcs,
 630                            DRM_MODE_CONNECTOR_LVDS);
 631
 632         drm_encoder_init(dev, encoder,
 633                          &cdv_intel_lvds_enc_funcs,
 634                          DRM_MODE_ENCODER_LVDS, NULL);
 635
 636
 637         gma_connector_attach_encoder(gma_connector, gma_encoder);
 638         gma_encoder->type = INTEL_OUTPUT_LVDS;
 639
 640         drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
 641         drm_connector_helper_add(connector,
 642                                  &cdv_intel_lvds_connector_helper_funcs);
 643         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 644         connector->interlace_allowed = false;
 645         connector->doublescan_allowed = false;
 646
 647         /*Attach connector properties*/
 648         drm_object_attach_property(&connector->base,
 649                                       dev->mode_config.scaling_mode_property,
 650                                       DRM_MODE_SCALE_FULLSCREEN);
 651         drm_object_attach_property(&connector->base,
 652                                       dev_priv->backlight_property,
 653                                       BRIGHTNESS_MAX_LEVEL);
 654
 655         /**
 656          * Set up I2C bus
 657          * FIXME: distroy i2c_bus when exit
 658          */
 659         gma_encoder->i2c_bus = psb_intel_i2c_create(dev,
 660                                                          GPIOB,
 661                                                          "LVDSBLC_B");
 662         if (!gma_encoder->i2c_bus) {
 663                 dev_printk(KERN_ERR,
 664                         &dev->pdev->dev, "I2C bus registration failed.\n");
 665                 goto failed_blc_i2c;
 666         }
 667         gma_encoder->i2c_bus->slave_addr = 0x2C;
 668         dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus;
 669
 670         /*
 671          * LVDS discovery:
 672          * 1) check for EDID on DDC
 673          * 2) check for VBT data
 674          * 3) check to see if LVDS is already on
 675          *    if none of the above, no panel
 676          * 4) make sure lid is open
 677          *    if closed, act like it's not there for now
 678          */
 679
 680         /* Set up the DDC bus. */
 681         gma_encoder->ddc_bus = psb_intel_i2c_create(dev,
 682                                                          GPIOC,
 683                                                          "LVDSDDC_C");
 684         if (!gma_encoder->ddc_bus) {
 685                 dev_printk(KERN_ERR, &dev->pdev->dev,
 686                            "DDC bus registration " "failed.\n");
 687                 goto failed_ddc;
 688         }
 689
 690         /*
 691          * Attempt to get the fixed panel mode from DDC.  Assume that the
 692          * preferred mode is the right one.
 693          */
 694         mutex_lock(&dev->mode_config.mutex);
 695         psb_intel_ddc_get_modes(connector,
 696                                 &gma_encoder->ddc_bus->adapter);
 697         list_for_each_entry(scan, &connector->probed_modes, head) {
 698                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 699                         mode_dev->panel_fixed_mode =
 700                             drm_mode_duplicate(dev, scan);
 701                         goto out;       /* FIXME: check for quirks */
 702                 }
 703         }
 704
 705         /* Failed to get EDID, what about VBT? do we need this?*/
 706         if (dev_priv->lfp_lvds_vbt_mode) {
 707                 mode_dev->panel_fixed_mode =
 708                         drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 709                 if (mode_dev->panel_fixed_mode) {
 710                         mode_dev->panel_fixed_mode->type |=
 711                                 DRM_MODE_TYPE_PREFERRED;
 712                         goto out;       /* FIXME: check for quirks */
 713                 }
 714         }
 715         /*
 716          * If we didn't get EDID, try checking if the panel is already turned
 717          * on.  If so, assume that whatever is currently programmed is the
 718          * correct mode.
 719          */
 720         lvds = REG_READ(LVDS);
 721         pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
 722         crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
 723
 724         if (crtc && (lvds & LVDS_PORT_EN)) {
 725                 mode_dev->panel_fixed_mode =
 726                     cdv_intel_crtc_mode_get(dev, crtc);
 727                 if (mode_dev->panel_fixed_mode) {
 728                         mode_dev->panel_fixed_mode->type |=
 729                             DRM_MODE_TYPE_PREFERRED;
 730                         goto out;       /* FIXME: check for quirks */
 731                 }
 732         }
 733
 734         /* If we still don't have a mode after all that, give up. */
 735         if (!mode_dev->panel_fixed_mode) {
 736                 DRM_DEBUG
 737                         ("Found no modes on the lvds, ignoring the LVDS\n");
 738                 goto failed_find;
 739         }
 740
 741         /* setup PWM */
 742         {
 743                 u32 pwm;
 744
 745                 pwm = REG_READ(BLC_PWM_CTL2);
 746                 if (pipe == 1)
 747                         pwm |= PWM_PIPE_B;
 748                 else
 749                         pwm &= ~PWM_PIPE_B;
 750                 pwm |= PWM_ENABLE;
 751                 REG_WRITE(BLC_PWM_CTL2, pwm);
 752         }
 753
 754 out:
 755         mutex_unlock(&dev->mode_config.mutex);
 756         drm_connector_register(connector);
 757         return;
 758
 759 failed_find:
 760         mutex_unlock(&dev->mode_config.mutex);
 761         pr_err("Failed find\n");
 762         psb_intel_i2c_destroy(gma_encoder->ddc_bus);
 763 failed_ddc:
 764         pr_err("Failed DDC\n");
 765         psb_intel_i2c_destroy(gma_encoder->i2c_bus);
 766 failed_blc_i2c:
 767         pr_err("Failed BLC\n");
 768         drm_encoder_cleanup(encoder);
 769         drm_connector_cleanup(connector);
 770         kfree(lvds_priv);
 771 failed_lvds_priv:
 772         kfree(gma_connector);
 773 failed_connector:
 774         kfree(gma_encoder);
 775 }