drivers/gpu/drm/gma500/gma_display.c

   1 /*
   2  * Copyright © 2006-2011 Intel Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Authors:
  18  *      Eric Anholt <eric@anholt.net>
  19  *      Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
  20  */
  21
  22 #include <drm/drmP.h>
  23 #include "gma_display.h"
  24 #include "psb_intel_drv.h"
  25 #include "psb_intel_reg.h"
  26 #include "psb_drv.h"
  27 #include "framebuffer.h"
  28
  29 /**
  30  * Returns whether any output on the specified pipe is of the specified type
  31  */
  32 bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
  33 {
  34         struct drm_device *dev = crtc->dev;
  35         struct drm_mode_config *mode_config = &dev->mode_config;
  36         struct drm_connector *l_entry;
  37
  38         list_for_each_entry(l_entry, &mode_config->connector_list, head) {
  39                 if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
  40                         struct gma_encoder *gma_encoder =
  41                                                 gma_attached_encoder(l_entry);
  42                         if (gma_encoder->type == type)
  43                                 return true;
  44                 }
  45         }
  46
  47         return false;
  48 }
  49
  50 void gma_wait_for_vblank(struct drm_device *dev)
  51 {
  52         /* Wait for 20ms, i.e. one cycle at 50hz. */
  53         mdelay(20);
  54 }
  55
  56 int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
  57                       struct drm_framebuffer *old_fb)
  58 {
  59         struct drm_device *dev = crtc->dev;
  60         struct drm_psb_private *dev_priv = dev->dev_private;
  61         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
  62         struct psb_framebuffer *psbfb = to_psb_fb(crtc->primary->fb);
  63         int pipe = gma_crtc->pipe;
  64         const struct psb_offset *map = &dev_priv->regmap[pipe];
  65         unsigned long start, offset;
  66         u32 dspcntr;
  67         int ret = 0;
  68
  69         if (!gma_power_begin(dev, true))
  70                 return 0;
  71
  72         /* no fb bound */
  73         if (!crtc->primary->fb) {
  74                 dev_err(dev->dev, "No FB bound\n");
  75                 goto gma_pipe_cleaner;
  76         }
  77
  78         /* We are displaying this buffer, make sure it is actually loaded
  79            into the GTT */
  80         ret = psb_gtt_pin(psbfb->gtt);
  81         if (ret < 0)
  82                 goto gma_pipe_set_base_exit;
  83         start = psbfb->gtt->offset;
  84         offset = y * crtc->primary->fb->pitches[0] + x * (crtc->primary->fb->bits_per_pixel / 8);
  85
  86         REG_WRITE(map->stride, crtc->primary->fb->pitches[0]);
  87
  88         dspcntr = REG_READ(map->cntr);
  89         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
  90
  91         switch (crtc->primary->fb->bits_per_pixel) {
  92         case 8:
  93                 dspcntr |= DISPPLANE_8BPP;
  94                 break;
  95         case 16:
  96                 if (crtc->primary->fb->depth == 15)
  97                         dspcntr |= DISPPLANE_15_16BPP;
  98                 else
  99                         dspcntr |= DISPPLANE_16BPP;
 100                 break;
 101         case 24:
 102         case 32:
 103                 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
 104                 break;
 105         default:
 106                 dev_err(dev->dev, "Unknown color depth\n");
 107                 ret = -EINVAL;
 108                 goto gma_pipe_set_base_exit;
 109         }
 110         REG_WRITE(map->cntr, dspcntr);
 111
 112         dev_dbg(dev->dev,
 113                 "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
 114
 115         /* FIXME: Investigate whether this really is the base for psb and why
 116                   the linear offset is named base for the other chips. map->surf
 117                   should be the base and map->linoff the offset for all chips */
 118         if (IS_PSB(dev)) {
 119                 REG_WRITE(map->base, offset + start);
 120                 REG_READ(map->base);
 121         } else {
 122                 REG_WRITE(map->base, offset);
 123                 REG_READ(map->base);
 124                 REG_WRITE(map->surf, start);
 125                 REG_READ(map->surf);
 126         }
 127
 128 gma_pipe_cleaner:
 129         /* If there was a previous display we can now unpin it */
 130         if (old_fb)
 131                 psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
 132
 133 gma_pipe_set_base_exit:
 134         gma_power_end(dev);
 135         return ret;
 136 }
 137
 138 /* Loads the palette/gamma unit for the CRTC with the prepared values */
 139 void gma_crtc_load_lut(struct drm_crtc *crtc)
 140 {
 141         struct drm_device *dev = crtc->dev;
 142         struct drm_psb_private *dev_priv = dev->dev_private;
 143         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 144         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 145         int palreg = map->palette;
 146         int i;
 147
 148         /* The clocks have to be on to load the palette. */
 149         if (!crtc->enabled)
 150                 return;
 151
 152         if (gma_power_begin(dev, false)) {
 153                 for (i = 0; i < 256; i++) {
 154                         REG_WRITE(palreg + 4 * i,
 155                                   ((gma_crtc->lut_r[i] +
 156                                   gma_crtc->lut_adj[i]) << 16) |
 157                                   ((gma_crtc->lut_g[i] +
 158                                   gma_crtc->lut_adj[i]) << 8) |
 159                                   (gma_crtc->lut_b[i] +
 160                                   gma_crtc->lut_adj[i]));
 161                 }
 162                 gma_power_end(dev);
 163         } else {
 164                 for (i = 0; i < 256; i++) {
 165                         /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
 166                         dev_priv->regs.pipe[0].palette[i] =
 167                                   ((gma_crtc->lut_r[i] +
 168                                   gma_crtc->lut_adj[i]) << 16) |
 169                                   ((gma_crtc->lut_g[i] +
 170                                   gma_crtc->lut_adj[i]) << 8) |
 171                                   (gma_crtc->lut_b[i] +
 172                                   gma_crtc->lut_adj[i]);
 173                 }
 174
 175         }
 176 }
 177
 178 int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
 179                        u32 size)
 180 {
 181         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 182         int i;
 183
 184         for (i = 0; i < size; i++) {
 185                 gma_crtc->lut_r[i] = red[i] >> 8;
 186                 gma_crtc->lut_g[i] = green[i] >> 8;
 187                 gma_crtc->lut_b[i] = blue[i] >> 8;
 188         }
 189
 190         gma_crtc_load_lut(crtc);
 191
 192         return 0;
 193 }
 194
 195 /**
 196  * Sets the power management mode of the pipe and plane.
 197  *
 198  * This code should probably grow support for turning the cursor off and back
 199  * on appropriately at the same time as we're turning the pipe off/on.
 200  */
 201 void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
 202 {
 203         struct drm_device *dev = crtc->dev;
 204         struct drm_psb_private *dev_priv = dev->dev_private;
 205         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 206         int pipe = gma_crtc->pipe;
 207         const struct psb_offset *map = &dev_priv->regmap[pipe];
 208         u32 temp;
 209
 210         /* XXX: When our outputs are all unaware of DPMS modes other than off
 211          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
 212          */
 213
 214         if (IS_CDV(dev))
 215                 dev_priv->ops->disable_sr(dev);
 216
 217         switch (mode) {
 218         case DRM_MODE_DPMS_ON:
 219         case DRM_MODE_DPMS_STANDBY:
 220         case DRM_MODE_DPMS_SUSPEND:
 221                 if (gma_crtc->active)
 222                         break;
 223
 224                 gma_crtc->active = true;
 225
 226                 /* Enable the DPLL */
 227                 temp = REG_READ(map->dpll);
 228                 if ((temp & DPLL_VCO_ENABLE) == 0) {
 229                         REG_WRITE(map->dpll, temp);
 230                         REG_READ(map->dpll);
 231                         /* Wait for the clocks to stabilize. */
 232                         udelay(150);
 233                         REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
 234                         REG_READ(map->dpll);
 235                         /* Wait for the clocks to stabilize. */
 236                         udelay(150);
 237                         REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
 238                         REG_READ(map->dpll);
 239                         /* Wait for the clocks to stabilize. */
 240                         udelay(150);
 241                 }
 242
 243                 /* Enable the plane */
 244                 temp = REG_READ(map->cntr);
 245                 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
 246                         REG_WRITE(map->cntr,
 247                                   temp | DISPLAY_PLANE_ENABLE);
 248                         /* Flush the plane changes */
 249                         REG_WRITE(map->base, REG_READ(map->base));
 250                 }
 251
 252                 udelay(150);
 253
 254                 /* Enable the pipe */
 255                 temp = REG_READ(map->conf);
 256                 if ((temp & PIPEACONF_ENABLE) == 0)
 257                         REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
 258
 259                 temp = REG_READ(map->status);
 260                 temp &= ~(0xFFFF);
 261                 temp |= PIPE_FIFO_UNDERRUN;
 262                 REG_WRITE(map->status, temp);
 263                 REG_READ(map->status);
 264
 265                 gma_crtc_load_lut(crtc);
 266
 267                 /* Give the overlay scaler a chance to enable
 268                  * if it's on this pipe */
 269                 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
 270                 break;
 271         case DRM_MODE_DPMS_OFF:
 272                 if (!gma_crtc->active)
 273                         break;
 274
 275                 gma_crtc->active = false;
 276
 277                 /* Give the overlay scaler a chance to disable
 278                  * if it's on this pipe */
 279                 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
 280
 281                 /* Disable the VGA plane that we never use */
 282                 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
 283
 284                 /* Turn off vblank interrupts */
 285                 drm_crtc_vblank_off(crtc);
 286
 287                 /* Wait for vblank for the disable to take effect */
 288                 gma_wait_for_vblank(dev);
 289
 290                 /* Disable plane */
 291                 temp = REG_READ(map->cntr);
 292                 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
 293                         REG_WRITE(map->cntr,
 294                                   temp & ~DISPLAY_PLANE_ENABLE);
 295                         /* Flush the plane changes */
 296                         REG_WRITE(map->base, REG_READ(map->base));
 297                         REG_READ(map->base);
 298                 }
 299
 300                 /* Disable pipe */
 301                 temp = REG_READ(map->conf);
 302                 if ((temp & PIPEACONF_ENABLE) != 0) {
 303                         REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
 304                         REG_READ(map->conf);
 305                 }
 306
 307                 /* Wait for vblank for the disable to take effect. */
 308                 gma_wait_for_vblank(dev);
 309
 310                 udelay(150);
 311
 312                 /* Disable DPLL */
 313                 temp = REG_READ(map->dpll);
 314                 if ((temp & DPLL_VCO_ENABLE) != 0) {
 315                         REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
 316                         REG_READ(map->dpll);
 317                 }
 318
 319                 /* Wait for the clocks to turn off. */
 320                 udelay(150);
 321                 break;
 322         }
 323
 324         if (IS_CDV(dev))
 325                 dev_priv->ops->update_wm(dev, crtc);
 326
 327         /* Set FIFO watermarks */
 328         REG_WRITE(DSPARB, 0x3F3E);
 329 }
 330
 331 int gma_crtc_cursor_set(struct drm_crtc *crtc,
 332                         struct drm_file *file_priv,
 333                         uint32_t handle,
 334                         uint32_t width, uint32_t height)
 335 {
 336         struct drm_device *dev = crtc->dev;
 337         struct drm_psb_private *dev_priv = dev->dev_private;
 338         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 339         int pipe = gma_crtc->pipe;
 340         uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
 341         uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
 342         uint32_t temp;
 343         size_t addr = 0;
 344         struct gtt_range *gt;
 345         struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
 346         struct drm_gem_object *obj;
 347         void *tmp_dst, *tmp_src;
 348         int ret = 0, i, cursor_pages;
 349
 350         /* If we didn't get a handle then turn the cursor off */
 351         if (!handle) {
 352                 temp = CURSOR_MODE_DISABLE;
 353                 if (gma_power_begin(dev, false)) {
 354                         REG_WRITE(control, temp);
 355                         REG_WRITE(base, 0);
 356                         gma_power_end(dev);
 357                 }
 358
 359                 /* Unpin the old GEM object */
 360                 if (gma_crtc->cursor_obj) {
 361                         gt = container_of(gma_crtc->cursor_obj,
 362                                           struct gtt_range, gem);
 363                         psb_gtt_unpin(gt);
 364                         drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj);
 365                         gma_crtc->cursor_obj = NULL;
 366                 }
 367                 return 0;
 368         }
 369
 370         /* Currently we only support 64x64 cursors */
 371         if (width != 64 || height != 64) {
 372                 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
 373                 return -EINVAL;
 374         }
 375
 376         obj = drm_gem_object_lookup(file_priv, handle);
 377         if (!obj) {
 378                 ret = -ENOENT;
 379                 goto unlock;
 380         }
 381
 382         if (obj->size < width * height * 4) {
 383                 dev_dbg(dev->dev, "Buffer is too small\n");
 384                 ret = -ENOMEM;
 385                 goto unref_cursor;
 386         }
 387
 388         gt = container_of(obj, struct gtt_range, gem);
 389
 390         /* Pin the memory into the GTT */
 391         ret = psb_gtt_pin(gt);
 392         if (ret) {
 393                 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
 394                 goto unref_cursor;
 395         }
 396
 397         if (dev_priv->ops->cursor_needs_phys) {
 398                 if (cursor_gt == NULL) {
 399                         dev_err(dev->dev, "No hardware cursor mem available");
 400                         ret = -ENOMEM;
 401                         goto unref_cursor;
 402                 }
 403
 404                 /* Prevent overflow */
 405                 if (gt->npage > 4)
 406                         cursor_pages = 4;
 407                 else
 408                         cursor_pages = gt->npage;
 409
 410                 /* Copy the cursor to cursor mem */
 411                 tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
 412                 for (i = 0; i < cursor_pages; i++) {
 413                         tmp_src = kmap(gt->pages[i]);
 414                         memcpy(tmp_dst, tmp_src, PAGE_SIZE);
 415                         kunmap(gt->pages[i]);
 416                         tmp_dst += PAGE_SIZE;
 417                 }
 418
 419                 addr = gma_crtc->cursor_addr;
 420         } else {
 421                 addr = gt->offset;
 422                 gma_crtc->cursor_addr = addr;
 423         }
 424
 425         temp = 0;
 426         /* set the pipe for the cursor */
 427         temp |= (pipe << 28);
 428         temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
 429
 430         if (gma_power_begin(dev, false)) {
 431                 REG_WRITE(control, temp);
 432                 REG_WRITE(base, addr);
 433                 gma_power_end(dev);
 434         }
 435
 436         /* unpin the old bo */
 437         if (gma_crtc->cursor_obj) {
 438                 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
 439                 psb_gtt_unpin(gt);
 440                 drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj);
 441         }
 442
 443         gma_crtc->cursor_obj = obj;
 444 unlock:
 445         return ret;
 446
 447 unref_cursor:
 448         drm_gem_object_unreference_unlocked(obj);
 449         return ret;
 450 }
 451
 452 int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 453 {
 454         struct drm_device *dev = crtc->dev;
 455         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 456         int pipe = gma_crtc->pipe;
 457         uint32_t temp = 0;
 458         uint32_t addr;
 459
 460         if (x < 0) {
 461                 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
 462                 x = -x;
 463         }
 464         if (y < 0) {
 465                 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
 466                 y = -y;
 467         }
 468
 469         temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
 470         temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
 471
 472         addr = gma_crtc->cursor_addr;
 473
 474         if (gma_power_begin(dev, false)) {
 475                 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
 476                 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
 477                 gma_power_end(dev);
 478         }
 479         return 0;
 480 }
 481
 482 void gma_crtc_prepare(struct drm_crtc *crtc)
 483 {
 484         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 485         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 486 }
 487
 488 void gma_crtc_commit(struct drm_crtc *crtc)
 489 {
 490         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 491         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
 492 }
 493
 494 void gma_crtc_disable(struct drm_crtc *crtc)
 495 {
 496         struct gtt_range *gt;
 497         const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 498
 499         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 500
 501         if (crtc->primary->fb) {
 502                 gt = to_psb_fb(crtc->primary->fb)->gtt;
 503                 psb_gtt_unpin(gt);
 504         }
 505 }
 506
 507 void gma_crtc_destroy(struct drm_crtc *crtc)
 508 {
 509         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 510
 511         kfree(gma_crtc->crtc_state);
 512         drm_crtc_cleanup(crtc);
 513         kfree(gma_crtc);
 514 }
 515
 516 int gma_crtc_set_config(struct drm_mode_set *set)
 517 {
 518         struct drm_device *dev = set->crtc->dev;
 519         struct drm_psb_private *dev_priv = dev->dev_private;
 520         int ret;
 521
 522         if (!dev_priv->rpm_enabled)
 523                 return drm_crtc_helper_set_config(set);
 524
 525         pm_runtime_forbid(&dev->pdev->dev);
 526         ret = drm_crtc_helper_set_config(set);
 527         pm_runtime_allow(&dev->pdev->dev);
 528
 529         return ret;
 530 }
 531
 532 /**
 533  * Save HW states of given crtc
 534  */
 535 void gma_crtc_save(struct drm_crtc *crtc)
 536 {
 537         struct drm_device *dev = crtc->dev;
 538         struct drm_psb_private *dev_priv = dev->dev_private;
 539         struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 540         struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
 541         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 542         uint32_t palette_reg;
 543         int i;
 544
 545         if (!crtc_state) {
 546                 dev_err(dev->dev, "No CRTC state found\n");
 547                 return;
 548         }
 549
 550         crtc_state->saveDSPCNTR = REG_READ(map->cntr);
 551         crtc_state->savePIPECONF = REG_READ(map->conf);
 552         crtc_state->savePIPESRC = REG_READ(map->src);
 553         crtc_state->saveFP0 = REG_READ(map->fp0);
 554         crtc_state->saveFP1 = REG_READ(map->fp1);
 555         crtc_state->saveDPLL = REG_READ(map->dpll);
 556         crtc_state->saveHTOTAL = REG_READ(map->htotal);
 557         crtc_state->saveHBLANK = REG_READ(map->hblank);
 558         crtc_state->saveHSYNC = REG_READ(map->hsync);
 559         crtc_state->saveVTOTAL = REG_READ(map->vtotal);
 560         crtc_state->saveVBLANK = REG_READ(map->vblank);
 561         crtc_state->saveVSYNC = REG_READ(map->vsync);
 562         crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
 563
 564         /* NOTE: DSPSIZE DSPPOS only for psb */
 565         crtc_state->saveDSPSIZE = REG_READ(map->size);
 566         crtc_state->saveDSPPOS = REG_READ(map->pos);
 567
 568         crtc_state->saveDSPBASE = REG_READ(map->base);
 569
 570         palette_reg = map->palette;
 571         for (i = 0; i < 256; ++i)
 572                 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
 573 }
 574
 575 /**
 576  * Restore HW states of given crtc
 577  */
 578 void gma_crtc_restore(struct drm_crtc *crtc)
 579 {
 580         struct drm_device *dev = crtc->dev;
 581         struct drm_psb_private *dev_priv = dev->dev_private;
 582         struct gma_crtc *gma_crtc =  to_gma_crtc(crtc);
 583         struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
 584         const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
 585         uint32_t palette_reg;
 586         int i;
 587
 588         if (!crtc_state) {
 589                 dev_err(dev->dev, "No crtc state\n");
 590                 return;
 591         }
 592
 593         if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
 594                 REG_WRITE(map->dpll,
 595                         crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
 596                 REG_READ(map->dpll);
 597                 udelay(150);
 598         }
 599
 600         REG_WRITE(map->fp0, crtc_state->saveFP0);
 601         REG_READ(map->fp0);
 602
 603         REG_WRITE(map->fp1, crtc_state->saveFP1);
 604         REG_READ(map->fp1);
 605
 606         REG_WRITE(map->dpll, crtc_state->saveDPLL);
 607         REG_READ(map->dpll);
 608         udelay(150);
 609
 610         REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
 611         REG_WRITE(map->hblank, crtc_state->saveHBLANK);
 612         REG_WRITE(map->hsync, crtc_state->saveHSYNC);
 613         REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
 614         REG_WRITE(map->vblank, crtc_state->saveVBLANK);
 615         REG_WRITE(map->vsync, crtc_state->saveVSYNC);
 616         REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
 617
 618         REG_WRITE(map->size, crtc_state->saveDSPSIZE);
 619         REG_WRITE(map->pos, crtc_state->saveDSPPOS);
 620
 621         REG_WRITE(map->src, crtc_state->savePIPESRC);
 622         REG_WRITE(map->base, crtc_state->saveDSPBASE);
 623         REG_WRITE(map->conf, crtc_state->savePIPECONF);
 624
 625         gma_wait_for_vblank(dev);
 626
 627         REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
 628         REG_WRITE(map->base, crtc_state->saveDSPBASE);
 629
 630         gma_wait_for_vblank(dev);
 631
 632         palette_reg = map->palette;
 633         for (i = 0; i < 256; ++i)
 634                 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
 635 }
 636
 637 void gma_encoder_prepare(struct drm_encoder *encoder)
 638 {
 639         const struct drm_encoder_helper_funcs *encoder_funcs =
 640             encoder->helper_private;
 641         /* lvds has its own version of prepare see psb_intel_lvds_prepare */
 642         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
 643 }
 644
 645 void gma_encoder_commit(struct drm_encoder *encoder)
 646 {
 647         const struct drm_encoder_helper_funcs *encoder_funcs =
 648             encoder->helper_private;
 649         /* lvds has its own version of commit see psb_intel_lvds_commit */
 650         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
 651 }
 652
 653 void gma_encoder_destroy(struct drm_encoder *encoder)
 654 {
 655         struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
 656
 657         drm_encoder_cleanup(encoder);
 658         kfree(intel_encoder);
 659 }
 660
 661 /* Currently there is only a 1:1 mapping of encoders and connectors */
 662 struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
 663 {
 664         struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
 665
 666         return &gma_encoder->base;
 667 }
 668
 669 void gma_connector_attach_encoder(struct gma_connector *connector,
 670                                   struct gma_encoder *encoder)
 671 {
 672         connector->encoder = encoder;
 673         drm_mode_connector_attach_encoder(&connector->base,
 674                                           &encoder->base);
 675 }
 676
 677 #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
 678
 679 bool gma_pll_is_valid(struct drm_crtc *crtc,
 680                       const struct gma_limit_t *limit,
 681                       struct gma_clock_t *clock)
 682 {
 683         if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
 684                 GMA_PLL_INVALID("p1 out of range");
 685         if (clock->p < limit->p.min || limit->p.max < clock->p)
 686                 GMA_PLL_INVALID("p out of range");
 687         if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
 688                 GMA_PLL_INVALID("m2 out of range");
 689         if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
 690                 GMA_PLL_INVALID("m1 out of range");
 691         /* On CDV m1 is always 0 */
 692         if (clock->m1 <= clock->m2 && clock->m1 != 0)
 693                 GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
 694         if (clock->m < limit->m.min || limit->m.max < clock->m)
 695                 GMA_PLL_INVALID("m out of range");
 696         if (clock->n < limit->n.min || limit->n.max < clock->n)
 697                 GMA_PLL_INVALID("n out of range");
 698         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 699                 GMA_PLL_INVALID("vco out of range");
 700         /* XXX: We may need to be checking "Dot clock"
 701          * depending on the multiplier, connector, etc.,
 702          * rather than just a single range.
 703          */
 704         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 705                 GMA_PLL_INVALID("dot out of range");
 706
 707         return true;
 708 }
 709
 710 bool gma_find_best_pll(const struct gma_limit_t *limit,
 711                        struct drm_crtc *crtc, int target, int refclk,
 712                        struct gma_clock_t *best_clock)
 713 {
 714         struct drm_device *dev = crtc->dev;
 715         const struct gma_clock_funcs *clock_funcs =
 716                                                 to_gma_crtc(crtc)->clock_funcs;
 717         struct gma_clock_t clock;
 718         int err = target;
 719
 720         if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
 721             (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
 722                 /*
 723                  * For LVDS, if the panel is on, just rely on its current
 724                  * settings for dual-channel.  We haven't figured out how to
 725                  * reliably set up different single/dual channel state, if we
 726                  * even can.
 727                  */
 728                 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 729                     LVDS_CLKB_POWER_UP)
 730                         clock.p2 = limit->p2.p2_fast;
 731                 else
 732                         clock.p2 = limit->p2.p2_slow;
 733         } else {
 734                 if (target < limit->p2.dot_limit)
 735                         clock.p2 = limit->p2.p2_slow;
 736                 else
 737                         clock.p2 = limit->p2.p2_fast;
 738         }
 739
 740         memset(best_clock, 0, sizeof(*best_clock));
 741
 742         /* m1 is always 0 on CDV so the outmost loop will run just once */
 743         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
 744                 for (clock.m2 = limit->m2.min;
 745                      (clock.m2 < clock.m1 || clock.m1 == 0) &&
 746                       clock.m2 <= limit->m2.max; clock.m2++) {
 747                         for (clock.n = limit->n.min;
 748                              clock.n <= limit->n.max; clock.n++) {
 749                                 for (clock.p1 = limit->p1.min;
 750                                      clock.p1 <= limit->p1.max;
 751                                      clock.p1++) {
 752                                         int this_err;
 753
 754                                         clock_funcs->clock(refclk, &clock);
 755
 756                                         if (!clock_funcs->pll_is_valid(crtc,
 757                                                                 limit, &clock))
 758                                                 continue;
 759
 760                                         this_err = abs(clock.dot - target);
 761                                         if (this_err < err) {
 762                                                 *best_clock = clock;
 763                                                 err = this_err;
 764                                         }
 765                                 }
 766                         }
 767                 }
 768         }
 769
 770         return err != target;
 771 }