drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c

   1 /*
   2  * Copyright (C) 2014 NVIDIA Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <linux/backlight.h>
  10 #include <linux/gpio/consumer.h>
  11 #include <linux/module.h>
  12 #include <linux/of.h>
  13 #include <linux/regulator/consumer.h>
  14
  15 #include <drm/drmP.h>
  16 #include <drm/drm_crtc.h>
  17 #include <drm/drm_mipi_dsi.h>
  18 #include <drm/drm_panel.h>
  19
  20 #include <video/mipi_display.h>
  21
  22 struct sharp_panel {
  23         struct drm_panel base;
  24         /* the datasheet refers to them as DSI-LINK1 and DSI-LINK2 */
  25         struct mipi_dsi_device *link1;
  26         struct mipi_dsi_device *link2;
  27
  28         struct backlight_device *backlight;
  29         struct regulator *supply;
  30
  31         bool prepared;
  32         bool enabled;
  33
  34         const struct drm_display_mode *mode;
  35 };
  36
  37 static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel)
  38 {
  39         return container_of(panel, struct sharp_panel, base);
  40 }
  41
  42 static void sharp_wait_frames(struct sharp_panel *sharp, unsigned int frames)
  43 {
  44         unsigned int refresh = drm_mode_vrefresh(sharp->mode);
  45
  46         if (WARN_ON(frames > refresh))
  47                 return;
  48
  49         msleep(1000 / (refresh / frames));
  50 }
  51
  52 static int sharp_panel_write(struct sharp_panel *sharp, u16 offset, u8 value)
  53 {
  54         u8 payload[3] = { offset >> 8, offset & 0xff, value };
  55         struct mipi_dsi_device *dsi = sharp->link1;
  56         ssize_t err;
  57
  58         err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
  59         if (err < 0) {
  60                 dev_err(&dsi->dev, "failed to write %02x to %04x: %zd\n",
  61                         value, offset, err);
  62                 return err;
  63         }
  64
  65         err = mipi_dsi_dcs_nop(dsi);
  66         if (err < 0) {
  67                 dev_err(&dsi->dev, "failed to send DCS nop: %zd\n", err);
  68                 return err;
  69         }
  70
  71         usleep_range(10, 20);
  72
  73         return 0;
  74 }
  75
  76 static __maybe_unused int sharp_panel_read(struct sharp_panel *sharp,
  77                                            u16 offset, u8 *value)
  78 {
  79         ssize_t err;
  80
  81         cpu_to_be16s(&offset);
  82
  83         err = mipi_dsi_generic_read(sharp->link1, &offset, sizeof(offset),
  84                                     value, sizeof(*value));
  85         if (err < 0)
  86                 dev_err(&sharp->link1->dev, "failed to read from %04x: %zd\n",
  87                         offset, err);
  88
  89         return err;
  90 }
  91
  92 static int sharp_panel_disable(struct drm_panel *panel)
  93 {
  94         struct sharp_panel *sharp = to_sharp_panel(panel);
  95
  96         if (!sharp->enabled)
  97                 return 0;
  98
  99         backlight_disable(sharp->backlight);
 100
 101         sharp->enabled = false;
 102
 103         return 0;
 104 }
 105
 106 static int sharp_panel_unprepare(struct drm_panel *panel)
 107 {
 108         struct sharp_panel *sharp = to_sharp_panel(panel);
 109         int err;
 110
 111         if (!sharp->prepared)
 112                 return 0;
 113
 114         sharp_wait_frames(sharp, 4);
 115
 116         err = mipi_dsi_dcs_set_display_off(sharp->link1);
 117         if (err < 0)
 118                 dev_err(panel->dev, "failed to set display off: %d\n", err);
 119
 120         err = mipi_dsi_dcs_enter_sleep_mode(sharp->link1);
 121         if (err < 0)
 122                 dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
 123
 124         msleep(120);
 125
 126         regulator_disable(sharp->supply);
 127
 128         sharp->prepared = false;
 129
 130         return 0;
 131 }
 132
 133 static int sharp_setup_symmetrical_split(struct mipi_dsi_device *left,
 134                                          struct mipi_dsi_device *right,
 135                                          const struct drm_display_mode *mode)
 136 {
 137         int err;
 138
 139         err = mipi_dsi_dcs_set_column_address(left, 0, mode->hdisplay / 2 - 1);
 140         if (err < 0) {
 141                 dev_err(&left->dev, "failed to set column address: %d\n", err);
 142                 return err;
 143         }
 144
 145         err = mipi_dsi_dcs_set_page_address(left, 0, mode->vdisplay - 1);
 146         if (err < 0) {
 147                 dev_err(&left->dev, "failed to set page address: %d\n", err);
 148                 return err;
 149         }
 150
 151         err = mipi_dsi_dcs_set_column_address(right, mode->hdisplay / 2,
 152                                               mode->hdisplay - 1);
 153         if (err < 0) {
 154                 dev_err(&right->dev, "failed to set column address: %d\n", err);
 155                 return err;
 156         }
 157
 158         err = mipi_dsi_dcs_set_page_address(right, 0, mode->vdisplay - 1);
 159         if (err < 0) {
 160                 dev_err(&right->dev, "failed to set page address: %d\n", err);
 161                 return err;
 162         }
 163
 164         return 0;
 165 }
 166
 167 static int sharp_panel_prepare(struct drm_panel *panel)
 168 {
 169         struct sharp_panel *sharp = to_sharp_panel(panel);
 170         u8 format = MIPI_DCS_PIXEL_FMT_24BIT;
 171         int err;
 172
 173         if (sharp->prepared)
 174                 return 0;
 175
 176         err = regulator_enable(sharp->supply);
 177         if (err < 0)
 178                 return err;
 179
 180         /*
 181          * According to the datasheet, the panel needs around 10 ms to fully
 182          * power up. At least another 120 ms is required before exiting sleep
 183          * mode to make sure the panel is ready. Throw in another 20 ms for
 184          * good measure.
 185          */
 186         msleep(150);
 187
 188         err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1);
 189         if (err < 0) {
 190                 dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
 191                 goto poweroff;
 192         }
 193
 194         /*
 195          * The MIPI DCS specification mandates this delay only between the
 196          * exit_sleep_mode and enter_sleep_mode commands, so it isn't strictly
 197          * necessary here.
 198          */
 199         /*
 200         msleep(120);
 201         */
 202
 203         /* set left-right mode */
 204         err = sharp_panel_write(sharp, 0x1000, 0x2a);
 205         if (err < 0) {
 206                 dev_err(panel->dev, "failed to set left-right mode: %d\n", err);
 207                 goto poweroff;
 208         }
 209
 210         /* enable command mode */
 211         err = sharp_panel_write(sharp, 0x1001, 0x01);
 212         if (err < 0) {
 213                 dev_err(panel->dev, "failed to enable command mode: %d\n", err);
 214                 goto poweroff;
 215         }
 216
 217         err = mipi_dsi_dcs_set_pixel_format(sharp->link1, format);
 218         if (err < 0) {
 219                 dev_err(panel->dev, "failed to set pixel format: %d\n", err);
 220                 goto poweroff;
 221         }
 222
 223         /*
 224          * TODO: The device supports both left-right and even-odd split
 225          * configurations, but this driver currently supports only the left-
 226          * right split. To support a different mode a mechanism needs to be
 227          * put in place to communicate the configuration back to the DSI host
 228          * controller.
 229          */
 230         err = sharp_setup_symmetrical_split(sharp->link1, sharp->link2,
 231                                             sharp->mode);
 232         if (err < 0) {
 233                 dev_err(panel->dev, "failed to set up symmetrical split: %d\n",
 234                         err);
 235                 goto poweroff;
 236         }
 237
 238         err = mipi_dsi_dcs_set_display_on(sharp->link1);
 239         if (err < 0) {
 240                 dev_err(panel->dev, "failed to set display on: %d\n", err);
 241                 goto poweroff;
 242         }
 243
 244         sharp->prepared = true;
 245
 246         /* wait for 6 frames before continuing */
 247         sharp_wait_frames(sharp, 6);
 248
 249         return 0;
 250
 251 poweroff:
 252         regulator_disable(sharp->supply);
 253         return err;
 254 }
 255
 256 static int sharp_panel_enable(struct drm_panel *panel)
 257 {
 258         struct sharp_panel *sharp = to_sharp_panel(panel);
 259
 260         if (sharp->enabled)
 261                 return 0;
 262
 263         backlight_enable(sharp->backlight);
 264
 265         sharp->enabled = true;
 266
 267         return 0;
 268 }
 269
 270 static const struct drm_display_mode default_mode = {
 271         .clock = 278000,
 272         .hdisplay = 2560,
 273         .hsync_start = 2560 + 128,
 274         .hsync_end = 2560 + 128 + 64,
 275         .htotal = 2560 + 128 + 64 + 64,
 276         .vdisplay = 1600,
 277         .vsync_start = 1600 + 4,
 278         .vsync_end = 1600 + 4 + 8,
 279         .vtotal = 1600 + 4 + 8 + 32,
 280         .vrefresh = 60,
 281 };
 282
 283 static int sharp_panel_get_modes(struct drm_panel *panel)
 284 {
 285         struct drm_display_mode *mode;
 286
 287         mode = drm_mode_duplicate(panel->drm, &default_mode);
 288         if (!mode) {
 289                 dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
 290                         default_mode.hdisplay, default_mode.vdisplay,
 291                         default_mode.vrefresh);
 292                 return -ENOMEM;
 293         }
 294
 295         drm_mode_set_name(mode);
 296
 297         drm_mode_probed_add(panel->connector, mode);
 298
 299         panel->connector->display_info.width_mm = 217;
 300         panel->connector->display_info.height_mm = 136;
 301
 302         return 1;
 303 }
 304
 305 static const struct drm_panel_funcs sharp_panel_funcs = {
 306         .disable = sharp_panel_disable,
 307         .unprepare = sharp_panel_unprepare,
 308         .prepare = sharp_panel_prepare,
 309         .enable = sharp_panel_enable,
 310         .get_modes = sharp_panel_get_modes,
 311 };
 312
 313 static const struct of_device_id sharp_of_match[] = {
 314         { .compatible = "sharp,lq101r1sx01", },
 315         { }
 316 };
 317 MODULE_DEVICE_TABLE(of, sharp_of_match);
 318
 319 static int sharp_panel_add(struct sharp_panel *sharp)
 320 {
 321         struct device *dev = &sharp->link1->dev;
 322
 323         sharp->mode = &default_mode;
 324
 325         sharp->supply = devm_regulator_get(&sharp->link1->dev, "power");
 326         if (IS_ERR(sharp->supply))
 327                 return PTR_ERR(sharp->supply);
 328
 329         sharp->backlight = devm_of_find_backlight(dev);
 330
 331         if (IS_ERR(sharp->backlight))
 332                 return PTR_ERR(sharp->backlight);
 333
 334         drm_panel_init(&sharp->base);
 335         sharp->base.funcs = &sharp_panel_funcs;
 336         sharp->base.dev = &sharp->link1->dev;
 337
 338         return drm_panel_add(&sharp->base);
 339 }
 340
 341 static void sharp_panel_del(struct sharp_panel *sharp)
 342 {
 343         if (sharp->base.dev)
 344                 drm_panel_remove(&sharp->base);
 345
 346         if (sharp->link2)
 347                 put_device(&sharp->link2->dev);
 348 }
 349
 350 static int sharp_panel_probe(struct mipi_dsi_device *dsi)
 351 {
 352         struct mipi_dsi_device *secondary = NULL;
 353         struct sharp_panel *sharp;
 354         struct device_node *np;
 355         int err;
 356
 357         dsi->lanes = 4;
 358         dsi->format = MIPI_DSI_FMT_RGB888;
 359         dsi->mode_flags = MIPI_DSI_MODE_LPM;
 360
 361         /* Find DSI-LINK1 */
 362         np = of_parse_phandle(dsi->dev.of_node, "link2", 0);
 363         if (np) {
 364                 secondary = of_find_mipi_dsi_device_by_node(np);
 365                 of_node_put(np);
 366
 367                 if (!secondary)
 368                         return -EPROBE_DEFER;
 369         }
 370
 371         /* register a panel for only the DSI-LINK1 interface */
 372         if (secondary) {
 373                 sharp = devm_kzalloc(&dsi->dev, sizeof(*sharp), GFP_KERNEL);
 374                 if (!sharp) {
 375                         put_device(&secondary->dev);
 376                         return -ENOMEM;
 377                 }
 378
 379                 mipi_dsi_set_drvdata(dsi, sharp);
 380
 381                 sharp->link2 = secondary;
 382                 sharp->link1 = dsi;
 383
 384                 err = sharp_panel_add(sharp);
 385                 if (err < 0) {
 386                         put_device(&secondary->dev);
 387                         return err;
 388                 }
 389         }
 390
 391         err = mipi_dsi_attach(dsi);
 392         if (err < 0) {
 393                 if (secondary)
 394                         sharp_panel_del(sharp);
 395
 396                 return err;
 397         }
 398
 399         return 0;
 400 }
 401
 402 static int sharp_panel_remove(struct mipi_dsi_device *dsi)
 403 {
 404         struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
 405         int err;
 406
 407         /* only detach from host for the DSI-LINK2 interface */
 408         if (!sharp) {
 409                 mipi_dsi_detach(dsi);
 410                 return 0;
 411         }
 412
 413         err = sharp_panel_disable(&sharp->base);
 414         if (err < 0)
 415                 dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
 416
 417         err = mipi_dsi_detach(dsi);
 418         if (err < 0)
 419                 dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
 420
 421         sharp_panel_del(sharp);
 422
 423         return 0;
 424 }
 425
 426 static void sharp_panel_shutdown(struct mipi_dsi_device *dsi)
 427 {
 428         struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi);
 429
 430         /* nothing to do for DSI-LINK2 */
 431         if (!sharp)
 432                 return;
 433
 434         sharp_panel_disable(&sharp->base);
 435 }
 436
 437 static struct mipi_dsi_driver sharp_panel_driver = {
 438         .driver = {
 439                 .name = "panel-sharp-lq101r1sx01",
 440                 .of_match_table = sharp_of_match,
 441         },
 442         .probe = sharp_panel_probe,
 443         .remove = sharp_panel_remove,
 444         .shutdown = sharp_panel_shutdown,
 445 };
 446 module_mipi_dsi_driver(sharp_panel_driver);
 447
 448 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
 449 MODULE_DESCRIPTION("Sharp LQ101R1SX01 panel driver");
 450 MODULE_LICENSE("GPL v2");