GNU Linux-libre 4.19.264-gnu1
[releases.git] / drivers / gpu / drm / sti / sti_hdmi.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) STMicroelectronics SA 2014
4  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
5  */
6
7 #ifndef _STI_HDMI_H_
8 #define _STI_HDMI_H_
9
10 #include <linux/hdmi.h>
11 #include <linux/platform_device.h>
12
13 #include <drm/drmP.h>
14 #include <media/cec-notifier.h>
15
16 #define HDMI_STA           0x0010
17 #define HDMI_STA_DLL_LCK   BIT(5)
18 #define HDMI_STA_HOT_PLUG  BIT(4)
19
20 struct sti_hdmi;
21
22 struct hdmi_phy_ops {
23         bool (*start)(struct sti_hdmi *hdmi);
24         void (*stop)(struct sti_hdmi *hdmi);
25 };
26
27 struct hdmi_audio_params {
28         bool enabled;
29         unsigned int sample_width;
30         unsigned int sample_rate;
31         struct hdmi_audio_infoframe cea;
32 };
33
34 static const struct drm_prop_enum_list colorspace_mode_names[] = {
35         { HDMI_COLORSPACE_RGB, "rgb" },
36         { HDMI_COLORSPACE_YUV422, "yuv422" },
37         { HDMI_COLORSPACE_YUV444, "yuv444" },
38 };
39
40 #define DEFAULT_COLORSPACE_MODE HDMI_COLORSPACE_RGB
41
42 /**
43  * STI hdmi structure
44  *
45  * @dev: driver device
46  * @drm_dev: pointer to drm device
47  * @mode: current display mode selected
48  * @regs: hdmi register
49  * @syscfg: syscfg register for pll rejection configuration
50  * @clk_pix: hdmi pixel clock
51  * @clk_tmds: hdmi tmds clock
52  * @clk_phy: hdmi phy clock
53  * @clk_audio: hdmi audio clock
54  * @irq: hdmi interrupt number
55  * @irq_status: interrupt status register
56  * @phy_ops: phy start/stop operations
57  * @enabled: true if hdmi is enabled else false
58  * @hpd: hot plug detect status
59  * @wait_event: wait event
60  * @event_received: wait event status
61  * @reset: reset control of the hdmi phy
62  * @ddc_adapt: i2c ddc adapter
63  * @colorspace: current colorspace selected
64  * @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
65  * @audio_pdev: ASoC hdmi-codec platform device
66  * @audio: hdmi audio parameters.
67  * @drm_connector: hdmi connector
68  * @notifier: hotplug detect notifier
69  */
70 struct sti_hdmi {
71         struct device dev;
72         struct drm_device *drm_dev;
73         struct drm_display_mode mode;
74         void __iomem *regs;
75         void __iomem *syscfg;
76         struct clk *clk_pix;
77         struct clk *clk_tmds;
78         struct clk *clk_phy;
79         struct clk *clk_audio;
80         int irq;
81         u32 irq_status;
82         struct hdmi_phy_ops *phy_ops;
83         bool enabled;
84         bool hpd;
85         wait_queue_head_t wait_event;
86         bool event_received;
87         struct reset_control *reset;
88         struct i2c_adapter *ddc_adapt;
89         enum hdmi_colorspace colorspace;
90         bool hdmi_monitor;
91         struct platform_device *audio_pdev;
92         struct hdmi_audio_params audio;
93         struct drm_connector *drm_connector;
94         struct cec_notifier *notifier;
95 };
96
97 u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
98 void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);
99
100 /**
101  * hdmi phy config structure
102  *
103  * A pointer to an array of these structures is passed to a TMDS (HDMI) output
104  * via the control interface to provide board and SoC specific
105  * configurations of the HDMI PHY. Each entry in the array specifies a hardware
106  * specific configuration for a given TMDS clock frequency range.
107  *
108  * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
109  * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
110  * @config: SoC specific register configuration
111  */
112 struct hdmi_phy_config {
113         u32 min_tmds_freq;
114         u32 max_tmds_freq;
115         u32 config[4];
116 };
117
118 #endif