GNU Linux-libre 4.19.286-gnu1
[releases.git] / drivers / i2c / busses / i2c-designware-core.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Synopsys DesignWare I2C adapter driver.
4  *
5  * Based on the TI DAVINCI I2C adapter driver.
6  *
7  * Copyright (C) 2006 Texas Instruments.
8  * Copyright (C) 2007 MontaVista Software Inc.
9  * Copyright (C) 2009 Provigent Ltd.
10  */
11
12 #include <linux/i2c.h>
13 #include <linux/pm_qos.h>
14
15 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |                     \
16                                         I2C_FUNC_SMBUS_BYTE |           \
17                                         I2C_FUNC_SMBUS_BYTE_DATA |      \
18                                         I2C_FUNC_SMBUS_WORD_DATA |      \
19                                         I2C_FUNC_SMBUS_BLOCK_DATA |     \
20                                         I2C_FUNC_SMBUS_I2C_BLOCK)
21
22 #define DW_IC_CON_MASTER                0x1
23 #define DW_IC_CON_SPEED_STD             0x2
24 #define DW_IC_CON_SPEED_FAST            0x4
25 #define DW_IC_CON_SPEED_HIGH            0x6
26 #define DW_IC_CON_SPEED_MASK            0x6
27 #define DW_IC_CON_10BITADDR_SLAVE               0x8
28 #define DW_IC_CON_10BITADDR_MASTER      0x10
29 #define DW_IC_CON_RESTART_EN            0x20
30 #define DW_IC_CON_SLAVE_DISABLE         0x40
31 #define DW_IC_CON_STOP_DET_IFADDRESSED          0x80
32 #define DW_IC_CON_TX_EMPTY_CTRL         0x100
33 #define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL         0x200
34
35 /*
36  * Registers offset
37  */
38 #define DW_IC_CON               0x0
39 #define DW_IC_TAR               0x4
40 #define DW_IC_SAR               0x8
41 #define DW_IC_DATA_CMD          0x10
42 #define DW_IC_SS_SCL_HCNT       0x14
43 #define DW_IC_SS_SCL_LCNT       0x18
44 #define DW_IC_FS_SCL_HCNT       0x1c
45 #define DW_IC_FS_SCL_LCNT       0x20
46 #define DW_IC_HS_SCL_HCNT       0x24
47 #define DW_IC_HS_SCL_LCNT       0x28
48 #define DW_IC_INTR_STAT         0x2c
49 #define DW_IC_INTR_MASK         0x30
50 #define DW_IC_RAW_INTR_STAT     0x34
51 #define DW_IC_RX_TL             0x38
52 #define DW_IC_TX_TL             0x3c
53 #define DW_IC_CLR_INTR          0x40
54 #define DW_IC_CLR_RX_UNDER      0x44
55 #define DW_IC_CLR_RX_OVER       0x48
56 #define DW_IC_CLR_TX_OVER       0x4c
57 #define DW_IC_CLR_RD_REQ        0x50
58 #define DW_IC_CLR_TX_ABRT       0x54
59 #define DW_IC_CLR_RX_DONE       0x58
60 #define DW_IC_CLR_ACTIVITY      0x5c
61 #define DW_IC_CLR_STOP_DET      0x60
62 #define DW_IC_CLR_START_DET     0x64
63 #define DW_IC_CLR_GEN_CALL      0x68
64 #define DW_IC_ENABLE            0x6c
65 #define DW_IC_STATUS            0x70
66 #define DW_IC_TXFLR             0x74
67 #define DW_IC_RXFLR             0x78
68 #define DW_IC_SDA_HOLD          0x7c
69 #define DW_IC_TX_ABRT_SOURCE    0x80
70 #define DW_IC_ENABLE_STATUS     0x9c
71 #define DW_IC_CLR_RESTART_DET   0xa8
72 #define DW_IC_COMP_PARAM_1      0xf4
73 #define DW_IC_COMP_VERSION      0xf8
74 #define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A
75 #define DW_IC_COMP_TYPE         0xfc
76 #define DW_IC_COMP_TYPE_VALUE   0x44570140
77
78 #define DW_IC_INTR_RX_UNDER     0x001
79 #define DW_IC_INTR_RX_OVER      0x002
80 #define DW_IC_INTR_RX_FULL      0x004
81 #define DW_IC_INTR_TX_OVER      0x008
82 #define DW_IC_INTR_TX_EMPTY     0x010
83 #define DW_IC_INTR_RD_REQ       0x020
84 #define DW_IC_INTR_TX_ABRT      0x040
85 #define DW_IC_INTR_RX_DONE      0x080
86 #define DW_IC_INTR_ACTIVITY     0x100
87 #define DW_IC_INTR_STOP_DET     0x200
88 #define DW_IC_INTR_START_DET    0x400
89 #define DW_IC_INTR_GEN_CALL     0x800
90 #define DW_IC_INTR_RESTART_DET  0x1000
91
92 #define DW_IC_INTR_DEFAULT_MASK         (DW_IC_INTR_RX_FULL | \
93                                          DW_IC_INTR_TX_ABRT | \
94                                          DW_IC_INTR_STOP_DET)
95 #define DW_IC_INTR_MASTER_MASK          (DW_IC_INTR_DEFAULT_MASK | \
96                                          DW_IC_INTR_TX_EMPTY)
97 #define DW_IC_INTR_SLAVE_MASK           (DW_IC_INTR_DEFAULT_MASK | \
98                                          DW_IC_INTR_RX_DONE | \
99                                          DW_IC_INTR_RX_UNDER | \
100                                          DW_IC_INTR_RD_REQ)
101
102 #define DW_IC_STATUS_ACTIVITY           0x1
103 #define DW_IC_STATUS_TFE                BIT(2)
104 #define DW_IC_STATUS_MASTER_ACTIVITY    BIT(5)
105 #define DW_IC_STATUS_SLAVE_ACTIVITY     BIT(6)
106
107 #define DW_IC_SDA_HOLD_RX_SHIFT         16
108 #define DW_IC_SDA_HOLD_RX_MASK          GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
109
110 #define DW_IC_ERR_TX_ABRT       0x1
111
112 #define DW_IC_TAR_10BITADDR_MASTER BIT(12)
113
114 #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH      (BIT(2) | BIT(3))
115 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK      GENMASK(3, 2)
116
117 /*
118  * status codes
119  */
120 #define STATUS_IDLE                     0x0
121 #define STATUS_WRITE_IN_PROGRESS        0x1
122 #define STATUS_READ_IN_PROGRESS         0x2
123
124 #define TIMEOUT                 20 /* ms */
125
126 /*
127  * operation modes
128  */
129 #define DW_IC_MASTER            0
130 #define DW_IC_SLAVE             1
131
132 /*
133  * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
134  *
135  * Only expected abort codes are listed here
136  * refer to the datasheet for the full list
137  */
138 #define ABRT_7B_ADDR_NOACK      0
139 #define ABRT_10ADDR1_NOACK      1
140 #define ABRT_10ADDR2_NOACK      2
141 #define ABRT_TXDATA_NOACK       3
142 #define ABRT_GCALL_NOACK        4
143 #define ABRT_GCALL_READ         5
144 #define ABRT_SBYTE_ACKDET       7
145 #define ABRT_SBYTE_NORSTRT      9
146 #define ABRT_10B_RD_NORSTRT     10
147 #define ABRT_MASTER_DIS         11
148 #define ARB_LOST                12
149 #define ABRT_SLAVE_FLUSH_TXFIFO 13
150 #define ABRT_SLAVE_ARBLOST      14
151 #define ABRT_SLAVE_RD_INTX      15
152
153 #define DW_IC_TX_ABRT_7B_ADDR_NOACK     (1UL << ABRT_7B_ADDR_NOACK)
154 #define DW_IC_TX_ABRT_10ADDR1_NOACK     (1UL << ABRT_10ADDR1_NOACK)
155 #define DW_IC_TX_ABRT_10ADDR2_NOACK     (1UL << ABRT_10ADDR2_NOACK)
156 #define DW_IC_TX_ABRT_TXDATA_NOACK      (1UL << ABRT_TXDATA_NOACK)
157 #define DW_IC_TX_ABRT_GCALL_NOACK       (1UL << ABRT_GCALL_NOACK)
158 #define DW_IC_TX_ABRT_GCALL_READ        (1UL << ABRT_GCALL_READ)
159 #define DW_IC_TX_ABRT_SBYTE_ACKDET      (1UL << ABRT_SBYTE_ACKDET)
160 #define DW_IC_TX_ABRT_SBYTE_NORSTRT     (1UL << ABRT_SBYTE_NORSTRT)
161 #define DW_IC_TX_ABRT_10B_RD_NORSTRT    (1UL << ABRT_10B_RD_NORSTRT)
162 #define DW_IC_TX_ABRT_MASTER_DIS        (1UL << ABRT_MASTER_DIS)
163 #define DW_IC_TX_ARB_LOST               (1UL << ARB_LOST)
164 #define DW_IC_RX_ABRT_SLAVE_RD_INTX     (1UL << ABRT_SLAVE_RD_INTX)
165 #define DW_IC_RX_ABRT_SLAVE_ARBLOST     (1UL << ABRT_SLAVE_ARBLOST)
166 #define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO        (1UL << ABRT_SLAVE_FLUSH_TXFIFO)
167
168 #define DW_IC_TX_ABRT_NOACK             (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
169                                          DW_IC_TX_ABRT_10ADDR1_NOACK | \
170                                          DW_IC_TX_ABRT_10ADDR2_NOACK | \
171                                          DW_IC_TX_ABRT_TXDATA_NOACK | \
172                                          DW_IC_TX_ABRT_GCALL_NOACK)
173
174
175 /**
176  * struct dw_i2c_dev - private i2c-designware data
177  * @dev: driver model device node
178  * @base: IO registers pointer
179  * @cmd_complete: tx completion indicator
180  * @clk: input reference clock
181  * @slave: represent an I2C slave device
182  * @cmd_err: run time hadware error code
183  * @msgs: points to an array of messages currently being transferred
184  * @msgs_num: the number of elements in msgs
185  * @msg_write_idx: the element index of the current tx message in the msgs
186  *      array
187  * @tx_buf_len: the length of the current tx buffer
188  * @tx_buf: the current tx buffer
189  * @msg_read_idx: the element index of the current rx message in the msgs
190  *      array
191  * @rx_buf_len: the length of the current rx buffer
192  * @rx_buf: the current rx buffer
193  * @msg_err: error status of the current transfer
194  * @status: i2c master status, one of STATUS_*
195  * @abort_source: copy of the TX_ABRT_SOURCE register
196  * @irq: interrupt number for the i2c master
197  * @adapter: i2c subsystem adapter node
198  * @slave_cfg: configuration for the slave device
199  * @tx_fifo_depth: depth of the hardware tx fifo
200  * @rx_fifo_depth: depth of the hardware rx fifo
201  * @rx_outstanding: current master-rx elements in tx fifo
202  * @timings: bus clock frequency, SDA hold and other timings
203  * @sda_hold_time: SDA hold value
204  * @ss_hcnt: standard speed HCNT value
205  * @ss_lcnt: standard speed LCNT value
206  * @fs_hcnt: fast speed HCNT value
207  * @fs_lcnt: fast speed LCNT value
208  * @fp_hcnt: fast plus HCNT value
209  * @fp_lcnt: fast plus LCNT value
210  * @hs_hcnt: high speed HCNT value
211  * @hs_lcnt: high speed LCNT value
212  * @pm_qos: pm_qos_request used while holding a hardware lock on the bus
213  * @acquire_lock: function to acquire a hardware lock on the bus
214  * @release_lock: function to release a hardware lock on the bus
215  * @pm_disabled: true if power-management should be disabled for this i2c-bus
216  * @disable: function to disable the controller
217  * @disable_int: function to disable all interrupts
218  * @init: function to initialize the I2C hardware
219  * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
220  *
221  * HCNT and LCNT parameters can be used if the platform knows more accurate
222  * values than the one computed based only on the input clock frequency.
223  * Leave them to be %0 if not used.
224  */
225 struct dw_i2c_dev {
226         struct device           *dev;
227         void __iomem            *base;
228         struct completion       cmd_complete;
229         struct clk              *clk;
230         struct reset_control    *rst;
231         struct i2c_client               *slave;
232         u32                     (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
233         struct dw_pci_controller *controller;
234         int                     cmd_err;
235         struct i2c_msg          *msgs;
236         int                     msgs_num;
237         int                     msg_write_idx;
238         u32                     tx_buf_len;
239         u8                      *tx_buf;
240         int                     msg_read_idx;
241         u32                     rx_buf_len;
242         u8                      *rx_buf;
243         int                     msg_err;
244         unsigned int            status;
245         u32                     abort_source;
246         int                     irq;
247         u32                     flags;
248         struct i2c_adapter      adapter;
249         u32                     functionality;
250         u32                     master_cfg;
251         u32                     slave_cfg;
252         unsigned int            tx_fifo_depth;
253         unsigned int            rx_fifo_depth;
254         int                     rx_outstanding;
255         struct i2c_timings      timings;
256         u32                     sda_hold_time;
257         u16                     ss_hcnt;
258         u16                     ss_lcnt;
259         u16                     fs_hcnt;
260         u16                     fs_lcnt;
261         u16                     fp_hcnt;
262         u16                     fp_lcnt;
263         u16                     hs_hcnt;
264         u16                     hs_lcnt;
265         struct pm_qos_request   pm_qos;
266         int                     (*acquire_lock)(struct dw_i2c_dev *dev);
267         void                    (*release_lock)(struct dw_i2c_dev *dev);
268         bool                    pm_disabled;
269         void                    (*disable)(struct dw_i2c_dev *dev);
270         void                    (*disable_int)(struct dw_i2c_dev *dev);
271         int                     (*init)(struct dw_i2c_dev *dev);
272         int                     mode;
273         struct i2c_bus_recovery_info rinfo;
274 };
275
276 #define ACCESS_SWAP             0x00000001
277 #define ACCESS_16BIT            0x00000002
278 #define ACCESS_INTR_MASK        0x00000004
279
280 #define MODEL_CHERRYTRAIL       0x00000100
281
282 u32 dw_readl(struct dw_i2c_dev *dev, int offset);
283 void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
284 int i2c_dw_set_reg_access(struct dw_i2c_dev *dev);
285 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
286 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
287 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
288 unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
289 int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
290 int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
291 void i2c_dw_release_lock(struct dw_i2c_dev *dev);
292 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
293 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
294 u32 i2c_dw_func(struct i2c_adapter *adap);
295 void i2c_dw_disable(struct dw_i2c_dev *dev);
296 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
297
298 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
299 {
300         dw_writel(dev, 1, DW_IC_ENABLE);
301 }
302
303 static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
304 {
305         dw_writel(dev, 0, DW_IC_ENABLE);
306 }
307
308 void __i2c_dw_disable(struct dw_i2c_dev *dev);
309
310 extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
311 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
312 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
313 extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
314 #else
315 static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
316 #endif
317
318 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
319 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
320 extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
321 #else
322 static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
323 static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
324 #endif