drivers/media/i2c/tvp5150.c

   1 /*
   2  * tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver
   3  *
   4  * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
   5  * This code is placed under the terms of the GNU General Public License v2
   6  */
   7
   8 #include <dt-bindings/media/tvp5150.h>
   9 #include <linux/i2c.h>
  10 #include <linux/slab.h>
  11 #include <linux/videodev2.h>
  12 #include <linux/delay.h>
  13 #include <linux/gpio/consumer.h>
  14 #include <linux/module.h>
  15 #include <media/v4l2-async.h>
  16 #include <media/v4l2-device.h>
  17 #include <media/v4l2-ctrls.h>
  18 #include <media/v4l2-of.h>
  19 #include <media/v4l2-mc.h>
  20
  21 #include "tvp5150_reg.h"
  22
  23 #define TVP5150_H_MAX           720U
  24 #define TVP5150_V_MAX_525_60    480U
  25 #define TVP5150_V_MAX_OTHERS    576U
  26 #define TVP5150_MAX_CROP_LEFT   511
  27 #define TVP5150_MAX_CROP_TOP    127
  28 #define TVP5150_CROP_SHIFT      2
  29
  30 MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
  31 MODULE_AUTHOR("Mauro Carvalho Chehab");
  32 MODULE_LICENSE("GPL");
  33
  34
  35 static int debug;
  36 module_param(debug, int, 0644);
  37 MODULE_PARM_DESC(debug, "Debug level (0-2)");
  38
  39 struct tvp5150 {
  40         struct v4l2_subdev sd;
  41 #ifdef CONFIG_MEDIA_CONTROLLER
  42         struct media_pad pads[DEMOD_NUM_PADS];
  43         struct media_entity input_ent[TVP5150_INPUT_NUM];
  44         struct media_pad input_pad[TVP5150_INPUT_NUM];
  45 #endif
  46         struct v4l2_ctrl_handler hdl;
  47         struct v4l2_rect rect;
  48
  49         v4l2_std_id norm;       /* Current set standard */
  50         u32 input;
  51         u32 output;
  52         int enable;
  53
  54         u16 dev_id;
  55         u16 rom_ver;
  56
  57         enum v4l2_mbus_type mbus_type;
  58 };
  59
  60 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
  61 {
  62         return container_of(sd, struct tvp5150, sd);
  63 }
  64
  65 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
  66 {
  67         return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
  68 }
  69
  70 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
  71 {
  72         struct i2c_client *c = v4l2_get_subdevdata(sd);
  73         int rc;
  74
  75         rc = i2c_smbus_read_byte_data(c, addr);
  76         if (rc < 0) {
  77                 v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
  78                 return rc;
  79         }
  80
  81         v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, rc);
  82
  83         return rc;
  84 }
  85
  86 static int tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
  87                                  unsigned char value)
  88 {
  89         struct i2c_client *c = v4l2_get_subdevdata(sd);
  90         int rc;
  91
  92         v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", addr, value);
  93         rc = i2c_smbus_write_byte_data(c, addr, value);
  94         if (rc < 0)
  95                 v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
  96
  97         return rc;
  98 }
  99
 100 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
 101                                 const u8 end, int max_line)
 102 {
 103         int i = 0;
 104
 105         while (init != (u8)(end + 1)) {
 106                 if ((i % max_line) == 0) {
 107                         if (i > 0)
 108                                 printk("\n");
 109                         printk("tvp5150: %s reg 0x%02x = ", s, init);
 110                 }
 111                 printk("%02x ", tvp5150_read(sd, init));
 112
 113                 init++;
 114                 i++;
 115         }
 116         printk("\n");
 117 }
 118
 119 static int tvp5150_log_status(struct v4l2_subdev *sd)
 120 {
 121         printk("tvp5150: Video input source selection #1 = 0x%02x\n",
 122                         tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
 123         printk("tvp5150: Analog channel controls = 0x%02x\n",
 124                         tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
 125         printk("tvp5150: Operation mode controls = 0x%02x\n",
 126                         tvp5150_read(sd, TVP5150_OP_MODE_CTL));
 127         printk("tvp5150: Miscellaneous controls = 0x%02x\n",
 128                         tvp5150_read(sd, TVP5150_MISC_CTL));
 129         printk("tvp5150: Autoswitch mask= 0x%02x\n",
 130                         tvp5150_read(sd, TVP5150_AUTOSW_MSK));
 131         printk("tvp5150: Color killer threshold control = 0x%02x\n",
 132                         tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
 133         printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
 134                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
 135                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
 136                         tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
 137         printk("tvp5150: Brightness control = 0x%02x\n",
 138                         tvp5150_read(sd, TVP5150_BRIGHT_CTL));
 139         printk("tvp5150: Color saturation control = 0x%02x\n",
 140                         tvp5150_read(sd, TVP5150_SATURATION_CTL));
 141         printk("tvp5150: Hue control = 0x%02x\n",
 142                         tvp5150_read(sd, TVP5150_HUE_CTL));
 143         printk("tvp5150: Contrast control = 0x%02x\n",
 144                         tvp5150_read(sd, TVP5150_CONTRAST_CTL));
 145         printk("tvp5150: Outputs and data rates select = 0x%02x\n",
 146                         tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
 147         printk("tvp5150: Configuration shared pins = 0x%02x\n",
 148                         tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
 149         printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
 150                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
 151                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
 152         printk("tvp5150: Active video cropping stop  = 0x%02x%02x\n",
 153                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
 154                         tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
 155         printk("tvp5150: Genlock/RTC = 0x%02x\n",
 156                         tvp5150_read(sd, TVP5150_GENLOCK));
 157         printk("tvp5150: Horizontal sync start = 0x%02x\n",
 158                         tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
 159         printk("tvp5150: Vertical blanking start = 0x%02x\n",
 160                         tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
 161         printk("tvp5150: Vertical blanking stop = 0x%02x\n",
 162                         tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
 163         printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
 164                         tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
 165                         tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
 166         printk("tvp5150: Interrupt reset register B = 0x%02x\n",
 167                         tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
 168         printk("tvp5150: Interrupt enable register B = 0x%02x\n",
 169                         tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
 170         printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
 171                         tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
 172         printk("tvp5150: Video standard = 0x%02x\n",
 173                         tvp5150_read(sd, TVP5150_VIDEO_STD));
 174         printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
 175                         tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
 176                         tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
 177         printk("tvp5150: Macrovision on counter = 0x%02x\n",
 178                         tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
 179         printk("tvp5150: Macrovision off counter = 0x%02x\n",
 180                         tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
 181         printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
 182                         (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
 183         printk("tvp5150: Device ID = %02x%02x\n",
 184                         tvp5150_read(sd, TVP5150_MSB_DEV_ID),
 185                         tvp5150_read(sd, TVP5150_LSB_DEV_ID));
 186         printk("tvp5150: ROM version = (hex) %02x.%02x\n",
 187                         tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
 188                         tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
 189         printk("tvp5150: Vertical line count = 0x%02x%02x\n",
 190                         tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
 191                         tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
 192         printk("tvp5150: Interrupt status register B = 0x%02x\n",
 193                         tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
 194         printk("tvp5150: Interrupt active register B = 0x%02x\n",
 195                         tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
 196         printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
 197                         tvp5150_read(sd, TVP5150_STATUS_REG_1),
 198                         tvp5150_read(sd, TVP5150_STATUS_REG_2),
 199                         tvp5150_read(sd, TVP5150_STATUS_REG_3),
 200                         tvp5150_read(sd, TVP5150_STATUS_REG_4),
 201                         tvp5150_read(sd, TVP5150_STATUS_REG_5));
 202
 203         dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
 204                         TVP5150_TELETEXT_FIL1_END, 8);
 205         dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
 206                         TVP5150_TELETEXT_FIL2_END, 8);
 207
 208         printk("tvp5150: Teletext filter enable = 0x%02x\n",
 209                         tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
 210         printk("tvp5150: Interrupt status register A = 0x%02x\n",
 211                         tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
 212         printk("tvp5150: Interrupt enable register A = 0x%02x\n",
 213                         tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
 214         printk("tvp5150: Interrupt configuration = 0x%02x\n",
 215                         tvp5150_read(sd, TVP5150_INT_CONF));
 216         printk("tvp5150: VDP status register = 0x%02x\n",
 217                         tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
 218         printk("tvp5150: FIFO word count = 0x%02x\n",
 219                         tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
 220         printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
 221                         tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
 222         printk("tvp5150: FIFO reset = 0x%02x\n",
 223                         tvp5150_read(sd, TVP5150_FIFO_RESET));
 224         printk("tvp5150: Line number interrupt = 0x%02x\n",
 225                         tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
 226         printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
 227                         tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
 228                         tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
 229         printk("tvp5150: FIFO output control = 0x%02x\n",
 230                         tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
 231         printk("tvp5150: Full field enable = 0x%02x\n",
 232                         tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
 233         printk("tvp5150: Full field mode register = 0x%02x\n",
 234                         tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
 235
 236         dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
 237                         TVP5150_CC_DATA_END, 8);
 238
 239         dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
 240                         TVP5150_WSS_DATA_END, 8);
 241
 242         dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
 243                         TVP5150_VPS_DATA_END, 8);
 244
 245         dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
 246                         TVP5150_VITC_DATA_END, 10);
 247
 248         dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
 249                         TVP5150_LINE_MODE_END, 8);
 250         return 0;
 251 }
 252
 253 /****************************************************************************
 254                         Basic functions
 255  ****************************************************************************/
 256
 257 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
 258 {
 259         int opmode = 0;
 260         struct tvp5150 *decoder = to_tvp5150(sd);
 261         int input = 0;
 262         int val;
 263
 264         /* Only tvp5150am1 and tvp5151 have signal generator support */
 265         if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||
 266             (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {
 267                 if (!decoder->enable)
 268                         input = 8;
 269         }
 270
 271         switch (decoder->input) {
 272         case TVP5150_COMPOSITE1:
 273                 input |= 2;
 274                 /* fall through */
 275         case TVP5150_COMPOSITE0:
 276                 break;
 277         case TVP5150_SVIDEO:
 278         default:
 279                 input |= 1;
 280                 break;
 281         }
 282
 283         v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
 284                         "=> tvp5150 input=%i, opmode=%i\n",
 285                         decoder->input, decoder->output,
 286                         input, opmode);
 287
 288         tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
 289         tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
 290
 291         /*
 292          * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
 293          * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
 294          * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
 295          * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
 296          * INTREQ/GPCL/VBLK to logic 1.
 297          */
 298         val = tvp5150_read(sd, TVP5150_MISC_CTL);
 299         if (val < 0) {
 300                 v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
 301                 return;
 302         }
 303
 304         if (decoder->input == TVP5150_SVIDEO)
 305                 val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
 306         else
 307                 val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
 308         tvp5150_write(sd, TVP5150_MISC_CTL, val);
 309 };
 310
 311 struct i2c_reg_value {
 312         unsigned char reg;
 313         unsigned char value;
 314 };
 315
 316 /* Default values as sugested at TVP5150AM1 datasheet */
 317 static const struct i2c_reg_value tvp5150_init_default[] = {
 318         { /* 0x00 */
 319                 TVP5150_VD_IN_SRC_SEL_1,0x00
 320         },
 321         { /* 0x01 */
 322                 TVP5150_ANAL_CHL_CTL,0x15
 323         },
 324         { /* 0x02 */
 325                 TVP5150_OP_MODE_CTL,0x00
 326         },
 327         { /* 0x03 */
 328                 TVP5150_MISC_CTL,0x01
 329         },
 330         { /* 0x06 */
 331                 TVP5150_COLOR_KIL_THSH_CTL,0x10
 332         },
 333         { /* 0x07 */
 334                 TVP5150_LUMA_PROC_CTL_1,0x60
 335         },
 336         { /* 0x08 */
 337                 TVP5150_LUMA_PROC_CTL_2,0x00
 338         },
 339         { /* 0x09 */
 340                 TVP5150_BRIGHT_CTL,0x80
 341         },
 342         { /* 0x0a */
 343                 TVP5150_SATURATION_CTL,0x80
 344         },
 345         { /* 0x0b */
 346                 TVP5150_HUE_CTL,0x00
 347         },
 348         { /* 0x0c */
 349                 TVP5150_CONTRAST_CTL,0x80
 350         },
 351         { /* 0x0d */
 352                 TVP5150_DATA_RATE_SEL,0x47
 353         },
 354         { /* 0x0e */
 355                 TVP5150_LUMA_PROC_CTL_3,0x00
 356         },
 357         { /* 0x0f */
 358                 TVP5150_CONF_SHARED_PIN,0x08
 359         },
 360         { /* 0x11 */
 361                 TVP5150_ACT_VD_CROP_ST_MSB,0x00
 362         },
 363         { /* 0x12 */
 364                 TVP5150_ACT_VD_CROP_ST_LSB,0x00
 365         },
 366         { /* 0x13 */
 367                 TVP5150_ACT_VD_CROP_STP_MSB,0x00
 368         },
 369         { /* 0x14 */
 370                 TVP5150_ACT_VD_CROP_STP_LSB,0x00
 371         },
 372         { /* 0x15 */
 373                 TVP5150_GENLOCK,0x01
 374         },
 375         { /* 0x16 */
 376                 TVP5150_HORIZ_SYNC_START,0x80
 377         },
 378         { /* 0x18 */
 379                 TVP5150_VERT_BLANKING_START,0x00
 380         },
 381         { /* 0x19 */
 382                 TVP5150_VERT_BLANKING_STOP,0x00
 383         },
 384         { /* 0x1a */
 385                 TVP5150_CHROMA_PROC_CTL_1,0x0c
 386         },
 387         { /* 0x1b */
 388                 TVP5150_CHROMA_PROC_CTL_2,0x14
 389         },
 390         { /* 0x1c */
 391                 TVP5150_INT_RESET_REG_B,0x00
 392         },
 393         { /* 0x1d */
 394                 TVP5150_INT_ENABLE_REG_B,0x00
 395         },
 396         { /* 0x1e */
 397                 TVP5150_INTT_CONFIG_REG_B,0x00
 398         },
 399         { /* 0x28 */
 400                 TVP5150_VIDEO_STD,0x00
 401         },
 402         { /* 0x2e */
 403                 TVP5150_MACROVISION_ON_CTR,0x0f
 404         },
 405         { /* 0x2f */
 406                 TVP5150_MACROVISION_OFF_CTR,0x01
 407         },
 408         { /* 0xbb */
 409                 TVP5150_TELETEXT_FIL_ENA,0x00
 410         },
 411         { /* 0xc0 */
 412                 TVP5150_INT_STATUS_REG_A,0x00
 413         },
 414         { /* 0xc1 */
 415                 TVP5150_INT_ENABLE_REG_A,0x00
 416         },
 417         { /* 0xc2 */
 418                 TVP5150_INT_CONF,0x04
 419         },
 420         { /* 0xc8 */
 421                 TVP5150_FIFO_INT_THRESHOLD,0x80
 422         },
 423         { /* 0xc9 */
 424                 TVP5150_FIFO_RESET,0x00
 425         },
 426         { /* 0xca */
 427                 TVP5150_LINE_NUMBER_INT,0x00
 428         },
 429         { /* 0xcb */
 430                 TVP5150_PIX_ALIGN_REG_LOW,0x4e
 431         },
 432         { /* 0xcc */
 433                 TVP5150_PIX_ALIGN_REG_HIGH,0x00
 434         },
 435         { /* 0xcd */
 436                 TVP5150_FIFO_OUT_CTRL,0x01
 437         },
 438         { /* 0xcf */
 439                 TVP5150_FULL_FIELD_ENA,0x00
 440         },
 441         { /* 0xd0 */
 442                 TVP5150_LINE_MODE_INI,0x00
 443         },
 444         { /* 0xfc */
 445                 TVP5150_FULL_FIELD_MODE_REG,0x7f
 446         },
 447         { /* end of data */
 448                 0xff,0xff
 449         }
 450 };
 451
 452 /* Default values as sugested at TVP5150AM1 datasheet */
 453 static const struct i2c_reg_value tvp5150_init_enable[] = {
 454         {
 455                 TVP5150_CONF_SHARED_PIN, 2
 456         },{     /* Automatic offset and AGC enabled */
 457                 TVP5150_ANAL_CHL_CTL, 0x15
 458         },{     /* Activate YCrCb output 0x9 or 0xd ? */
 459                 TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
 460                                   TVP5150_MISC_CTL_INTREQ_OE |
 461                                   TVP5150_MISC_CTL_YCBCR_OE |
 462                                   TVP5150_MISC_CTL_SYNC_OE |
 463                                   TVP5150_MISC_CTL_VBLANK |
 464                                   TVP5150_MISC_CTL_CLOCK_OE,
 465         },{     /* Activates video std autodetection for all standards */
 466                 TVP5150_AUTOSW_MSK, 0x0
 467         },{     /* Default format: 0x47. For 4:2:2: 0x40 */
 468                 TVP5150_DATA_RATE_SEL, 0x47
 469         },{
 470                 TVP5150_CHROMA_PROC_CTL_1, 0x0c
 471         },{
 472                 TVP5150_CHROMA_PROC_CTL_2, 0x54
 473         },{     /* Non documented, but initialized on WinTV USB2 */
 474                 0x27, 0x20
 475         },{
 476                 0xff,0xff
 477         }
 478 };
 479
 480 struct tvp5150_vbi_type {
 481         unsigned int vbi_type;
 482         unsigned int ini_line;
 483         unsigned int end_line;
 484         unsigned int by_field :1;
 485 };
 486
 487 struct i2c_vbi_ram_value {
 488         u16 reg;
 489         struct tvp5150_vbi_type type;
 490         unsigned char values[16];
 491 };
 492
 493 /* This struct have the values for each supported VBI Standard
 494  * by
 495  tvp5150_vbi_types should follow the same order as vbi_ram_default
 496  * value 0 means rom position 0x10, value 1 means rom position 0x30
 497  * and so on. There are 16 possible locations from 0 to 15.
 498  */
 499
 500 static struct i2c_vbi_ram_value vbi_ram_default[] =
 501 {
 502         /* FIXME: Current api doesn't handle all VBI types, those not
 503            yet supported are placed under #if 0 */
 504 #if 0
 505         {0x010, /* Teletext, SECAM, WST System A */
 506                 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
 507                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
 508                   0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
 509         },
 510 #endif
 511         {0x030, /* Teletext, PAL, WST System B */
 512                 {V4L2_SLICED_TELETEXT_B,6,22,1},
 513                 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
 514                   0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
 515         },
 516 #if 0
 517         {0x050, /* Teletext, PAL, WST System C */
 518                 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
 519                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 520                   0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 521         },
 522         {0x070, /* Teletext, NTSC, WST System B */
 523                 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
 524                 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
 525                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 526         },
 527         {0x090, /* Tetetext, NTSC NABTS System C */
 528                 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
 529                 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
 530                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
 531         },
 532         {0x0b0, /* Teletext, NTSC-J, NABTS System D */
 533                 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
 534                 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
 535                   0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
 536         },
 537         {0x0d0, /* Closed Caption, PAL/SECAM */
 538                 {V4L2_SLICED_CAPTION_625,22,22,1},
 539                 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 540                   0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 541         },
 542 #endif
 543         {0x0f0, /* Closed Caption, NTSC */
 544                 {V4L2_SLICED_CAPTION_525,21,21,1},
 545                 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
 546                   0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
 547         },
 548         {0x110, /* Wide Screen Signal, PAL/SECAM */
 549                 {V4L2_SLICED_WSS_625,23,23,1},
 550                 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
 551                   0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
 552         },
 553 #if 0
 554         {0x130, /* Wide Screen Signal, NTSC C */
 555                 {V4L2_SLICED_WSS_525,20,20,1},
 556                 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
 557                   0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
 558         },
 559         {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
 560                 {V4l2_SLICED_VITC_625,6,22,0},
 561                 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 562                   0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 563         },
 564         {0x170, /* Vertical Interval Timecode (VITC), NTSC */
 565                 {V4l2_SLICED_VITC_525,10,20,0},
 566                 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
 567                   0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
 568         },
 569 #endif
 570         {0x190, /* Video Program System (VPS), PAL */
 571                 {V4L2_SLICED_VPS,16,16,0},
 572                 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
 573                   0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
 574         },
 575         /* 0x1d0 User programmable */
 576
 577         /* End of struct */
 578         { (u16)-1 }
 579 };
 580
 581 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
 582                                 const struct i2c_reg_value *regs)
 583 {
 584         while (regs->reg != 0xff) {
 585                 tvp5150_write(sd, regs->reg, regs->value);
 586                 regs++;
 587         }
 588         return 0;
 589 }
 590
 591 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
 592                                 const struct i2c_vbi_ram_value *regs)
 593 {
 594         unsigned int i;
 595
 596         /* Disable Full Field */
 597         tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
 598
 599         /* Before programming, Line mode should be at 0xff */
 600         for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
 601                 tvp5150_write(sd, i, 0xff);
 602
 603         /* Load Ram Table */
 604         while (regs->reg != (u16)-1) {
 605                 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
 606                 tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
 607
 608                 for (i = 0; i < 16; i++)
 609                         tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
 610
 611                 regs++;
 612         }
 613         return 0;
 614 }
 615
 616 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
 617 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
 618                                 struct v4l2_sliced_vbi_cap *cap)
 619 {
 620         const struct i2c_vbi_ram_value *regs = vbi_ram_default;
 621         int line;
 622
 623         v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
 624         memset(cap, 0, sizeof *cap);
 625
 626         while (regs->reg != (u16)-1 ) {
 627                 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
 628                         cap->service_lines[0][line] |= regs->type.vbi_type;
 629                 }
 630                 cap->service_set |= regs->type.vbi_type;
 631
 632                 regs++;
 633         }
 634         return 0;
 635 }
 636
 637 /* Set vbi processing
 638  * type - one of tvp5150_vbi_types
 639  * line - line to gather data
 640  * fields: bit 0 field1, bit 1, field2
 641  * flags (default=0xf0) is a bitmask, were set means:
 642  *      bit 7: enable filtering null bytes on CC
 643  *      bit 6: send data also to FIFO
 644  *      bit 5: don't allow data with errors on FIFO
 645  *      bit 4: enable ECC when possible
 646  * pix_align = pix alignment:
 647  *      LSB = field1
 648  *      MSB = field2
 649  */
 650 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
 651                         const struct i2c_vbi_ram_value *regs,
 652                         unsigned int type,u8 flags, int line,
 653                         const int fields)
 654 {
 655         struct tvp5150 *decoder = to_tvp5150(sd);
 656         v4l2_std_id std = decoder->norm;
 657         u8 reg;
 658         int pos=0;
 659
 660         if (std == V4L2_STD_ALL) {
 661                 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
 662                 return 0;
 663         } else if (std & V4L2_STD_625_50) {
 664                 /* Don't follow NTSC Line number convension */
 665                 line += 3;
 666         }
 667
 668         if (line<6||line>27)
 669                 return 0;
 670
 671         while (regs->reg != (u16)-1 ) {
 672                 if ((type & regs->type.vbi_type) &&
 673                     (line>=regs->type.ini_line) &&
 674                     (line<=regs->type.end_line)) {
 675                         type=regs->type.vbi_type;
 676                         break;
 677                 }
 678
 679                 regs++;
 680                 pos++;
 681         }
 682         if (regs->reg == (u16)-1)
 683                 return 0;
 684
 685         type=pos | (flags & 0xf0);
 686         reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
 687
 688         if (fields&1) {
 689                 tvp5150_write(sd, reg, type);
 690         }
 691
 692         if (fields&2) {
 693                 tvp5150_write(sd, reg+1, type);
 694         }
 695
 696         return type;
 697 }
 698
 699 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
 700                         const struct i2c_vbi_ram_value *regs, int line)
 701 {
 702         struct tvp5150 *decoder = to_tvp5150(sd);
 703         v4l2_std_id std = decoder->norm;
 704         u8 reg;
 705         int pos, type = 0;
 706         int i, ret = 0;
 707
 708         if (std == V4L2_STD_ALL) {
 709                 v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
 710                 return 0;
 711         } else if (std & V4L2_STD_625_50) {
 712                 /* Don't follow NTSC Line number convension */
 713                 line += 3;
 714         }
 715
 716         if (line < 6 || line > 27)
 717                 return 0;
 718
 719         reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
 720
 721         for (i = 0; i <= 1; i++) {
 722                 ret = tvp5150_read(sd, reg + i);
 723                 if (ret < 0) {
 724                         v4l2_err(sd, "%s: failed with error = %d\n",
 725                                  __func__, ret);
 726                         return 0;
 727                 }
 728                 pos = ret & 0x0f;
 729                 if (pos < 0x0f)
 730                         type |= regs[pos].type.vbi_type;
 731         }
 732
 733         return type;
 734 }
 735
 736 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
 737 {
 738         struct tvp5150 *decoder = to_tvp5150(sd);
 739         int fmt = 0;
 740
 741         decoder->norm = std;
 742
 743         /* First tests should be against specific std */
 744
 745         if (std == V4L2_STD_NTSC_443) {
 746                 fmt = VIDEO_STD_NTSC_4_43_BIT;
 747         } else if (std == V4L2_STD_PAL_M) {
 748                 fmt = VIDEO_STD_PAL_M_BIT;
 749         } else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
 750                 fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
 751         } else {
 752                 /* Then, test against generic ones */
 753                 if (std & V4L2_STD_NTSC)
 754                         fmt = VIDEO_STD_NTSC_MJ_BIT;
 755                 else if (std & V4L2_STD_PAL)
 756                         fmt = VIDEO_STD_PAL_BDGHIN_BIT;
 757                 else if (std & V4L2_STD_SECAM)
 758                         fmt = VIDEO_STD_SECAM_BIT;
 759         }
 760
 761         v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
 762         tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
 763         return 0;
 764 }
 765
 766 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 767 {
 768         struct tvp5150 *decoder = to_tvp5150(sd);
 769
 770         if (decoder->norm == std)
 771                 return 0;
 772
 773         /* Change cropping height limits */
 774         if (std & V4L2_STD_525_60)
 775                 decoder->rect.height = TVP5150_V_MAX_525_60;
 776         else
 777                 decoder->rect.height = TVP5150_V_MAX_OTHERS;
 778
 779
 780         return tvp5150_set_std(sd, std);
 781 }
 782
 783 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 784 {
 785         struct tvp5150 *decoder = to_tvp5150(sd);
 786
 787         /* Initializes TVP5150 to its default values */
 788         tvp5150_write_inittab(sd, tvp5150_init_default);
 789
 790         /* Initializes VDP registers */
 791         tvp5150_vdp_init(sd, vbi_ram_default);
 792
 793         /* Selects decoder input */
 794         tvp5150_selmux(sd);
 795
 796         /* Initializes TVP5150 to stream enabled values */
 797         tvp5150_write_inittab(sd, tvp5150_init_enable);
 798
 799         /* Initialize image preferences */
 800         v4l2_ctrl_handler_setup(&decoder->hdl);
 801
 802         tvp5150_set_std(sd, decoder->norm);
 803
 804         if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
 805                 tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
 806
 807         return 0;
 808 };
 809
 810 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
 811 {
 812         struct v4l2_subdev *sd = to_sd(ctrl);
 813         struct tvp5150 *decoder = to_tvp5150(sd);
 814
 815         switch (ctrl->id) {
 816         case V4L2_CID_BRIGHTNESS:
 817                 tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
 818                 return 0;
 819         case V4L2_CID_CONTRAST:
 820                 tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
 821                 return 0;
 822         case V4L2_CID_SATURATION:
 823                 tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
 824                 return 0;
 825         case V4L2_CID_HUE:
 826                 tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
 827                 return 0;
 828         case V4L2_CID_TEST_PATTERN:
 829                 decoder->enable = ctrl->val ? false : true;
 830                 tvp5150_selmux(sd);
 831                 return 0;
 832         }
 833         return -EINVAL;
 834 }
 835
 836 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
 837 {
 838         int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
 839
 840         switch (val & 0x0F) {
 841         case 0x01:
 842                 return V4L2_STD_NTSC;
 843         case 0x03:
 844                 return V4L2_STD_PAL;
 845         case 0x05:
 846                 return V4L2_STD_PAL_M;
 847         case 0x07:
 848                 return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
 849         case 0x09:
 850                 return V4L2_STD_NTSC_443;
 851         case 0xb:
 852                 return V4L2_STD_SECAM;
 853         default:
 854                 return V4L2_STD_UNKNOWN;
 855         }
 856 }
 857
 858 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 859                 struct v4l2_subdev_pad_config *cfg,
 860                 struct v4l2_subdev_format *format)
 861 {
 862         struct v4l2_mbus_framefmt *f;
 863         struct tvp5150 *decoder = to_tvp5150(sd);
 864
 865         if (!format || format->pad)
 866                 return -EINVAL;
 867
 868         f = &format->format;
 869
 870         f->width = decoder->rect.width;
 871         f->height = decoder->rect.height / 2;
 872
 873         f->code = MEDIA_BUS_FMT_UYVY8_2X8;
 874         f->field = V4L2_FIELD_ALTERNATE;
 875         f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 876
 877         v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
 878                         f->height);
 879         return 0;
 880 }
 881
 882 static int tvp5150_set_selection(struct v4l2_subdev *sd,
 883                                  struct v4l2_subdev_pad_config *cfg,
 884                                  struct v4l2_subdev_selection *sel)
 885 {
 886         struct tvp5150 *decoder = to_tvp5150(sd);
 887         struct v4l2_rect rect = sel->r;
 888         v4l2_std_id std;
 889         int hmax;
 890
 891         if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
 892             sel->target != V4L2_SEL_TGT_CROP)
 893                 return -EINVAL;
 894
 895         v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
 896                 __func__, rect.left, rect.top, rect.width, rect.height);
 897
 898         /* tvp5150 has some special limits */
 899         rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
 900         rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
 901
 902         /* Calculate height based on current standard */
 903         if (decoder->norm == V4L2_STD_ALL)
 904                 std = tvp5150_read_std(sd);
 905         else
 906                 std = decoder->norm;
 907
 908         if (std & V4L2_STD_525_60)
 909                 hmax = TVP5150_V_MAX_525_60;
 910         else
 911                 hmax = TVP5150_V_MAX_OTHERS;
 912
 913         /*
 914          * alignments:
 915          *  - width = 2 due to UYVY colorspace
 916          *  - height, image = no special alignment
 917          */
 918         v4l_bound_align_image(&rect.width,
 919                               TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
 920                               TVP5150_H_MAX - rect.left, 1, &rect.height,
 921                               hmax - TVP5150_MAX_CROP_TOP - rect.top,
 922                               hmax - rect.top, 0, 0);
 923
 924         tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
 925         tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
 926                       rect.top + rect.height - hmax);
 927         tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
 928                       rect.left >> TVP5150_CROP_SHIFT);
 929         tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
 930                       rect.left | (1 << TVP5150_CROP_SHIFT));
 931         tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
 932                       (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
 933                       TVP5150_CROP_SHIFT);
 934         tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
 935                       rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
 936
 937         decoder->rect = rect;
 938
 939         return 0;
 940 }
 941
 942 static int tvp5150_get_selection(struct v4l2_subdev *sd,
 943                                  struct v4l2_subdev_pad_config *cfg,
 944                                  struct v4l2_subdev_selection *sel)
 945 {
 946         struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
 947         v4l2_std_id std;
 948
 949         if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 950                 return -EINVAL;
 951
 952         switch (sel->target) {
 953         case V4L2_SEL_TGT_CROP_BOUNDS:
 954         case V4L2_SEL_TGT_CROP_DEFAULT:
 955                 sel->r.left = 0;
 956                 sel->r.top = 0;
 957                 sel->r.width = TVP5150_H_MAX;
 958
 959                 /* Calculate height based on current standard */
 960                 if (decoder->norm == V4L2_STD_ALL)
 961                         std = tvp5150_read_std(sd);
 962                 else
 963                         std = decoder->norm;
 964                 if (std & V4L2_STD_525_60)
 965                         sel->r.height = TVP5150_V_MAX_525_60;
 966                 else
 967                         sel->r.height = TVP5150_V_MAX_OTHERS;
 968                 return 0;
 969         case V4L2_SEL_TGT_CROP:
 970                 sel->r = decoder->rect;
 971                 return 0;
 972         default:
 973                 return -EINVAL;
 974         }
 975 }
 976
 977 static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
 978                                  struct v4l2_mbus_config *cfg)
 979 {
 980         struct tvp5150 *decoder = to_tvp5150(sd);
 981
 982         cfg->type = decoder->mbus_type;
 983         cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
 984                    | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
 985
 986         return 0;
 987 }
 988
 989 /****************************************************************************
 990                         V4L2 subdev pad ops
 991  ****************************************************************************/
 992 static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
 993                 struct v4l2_subdev_pad_config *cfg,
 994                 struct v4l2_subdev_mbus_code_enum *code)
 995 {
 996         if (code->pad || code->index)
 997                 return -EINVAL;
 998
 999         code->code = MEDIA_BUS_FMT_UYVY8_2X8;
1000         return 0;
1001 }
1002
1003 static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
1004                                    struct v4l2_subdev_pad_config *cfg,
1005                                    struct v4l2_subdev_frame_size_enum *fse)
1006 {
1007         struct tvp5150 *decoder = to_tvp5150(sd);
1008
1009         if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
1010                 return -EINVAL;
1011
1012         fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
1013         fse->min_width = decoder->rect.width;
1014         fse->max_width = decoder->rect.width;
1015         fse->min_height = decoder->rect.height / 2;
1016         fse->max_height = decoder->rect.height / 2;
1017
1018         return 0;
1019 }
1020
1021 /****************************************************************************
1022                         Media entity ops
1023  ****************************************************************************/
1024
1025 static int tvp5150_link_setup(struct media_entity *entity,
1026                               const struct media_pad *local,
1027                               const struct media_pad *remote, u32 flags)
1028 {
1029 #ifdef CONFIG_MEDIA_CONTROLLER
1030         struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1031         struct tvp5150 *decoder = to_tvp5150(sd);
1032         int i;
1033
1034         for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1035                 if (remote->entity == &decoder->input_ent[i])
1036                         break;
1037         }
1038
1039         /* Do nothing for entities that are not input connectors */
1040         if (i == TVP5150_INPUT_NUM)
1041                 return 0;
1042
1043         decoder->input = i;
1044
1045         tvp5150_selmux(sd);
1046 #endif
1047
1048         return 0;
1049 }
1050
1051 static const struct media_entity_operations tvp5150_sd_media_ops = {
1052         .link_setup = tvp5150_link_setup,
1053 };
1054
1055 /****************************************************************************
1056                         I2C Command
1057  ****************************************************************************/
1058
1059 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
1060 {
1061         struct tvp5150 *decoder = to_tvp5150(sd);
1062         int val;
1063
1064         /* Enable or disable the video output signals. */
1065         val = tvp5150_read(sd, TVP5150_MISC_CTL);
1066         if (val < 0)
1067                 return val;
1068
1069         val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
1070                  TVP5150_MISC_CTL_CLOCK_OE);
1071
1072         if (enable) {
1073                 /*
1074                  * Enable the YCbCr and clock outputs. In discrete sync mode
1075                  * (non-BT.656) additionally enable the the sync outputs.
1076                  */
1077                 val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
1078                 if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
1079                         val |= TVP5150_MISC_CTL_SYNC_OE;
1080         }
1081
1082         tvp5150_write(sd, TVP5150_MISC_CTL, val);
1083
1084         return 0;
1085 }
1086
1087 static int tvp5150_s_routing(struct v4l2_subdev *sd,
1088                              u32 input, u32 output, u32 config)
1089 {
1090         struct tvp5150 *decoder = to_tvp5150(sd);
1091
1092         decoder->input = input;
1093         decoder->output = output;
1094
1095         if (output == TVP5150_BLACK_SCREEN)
1096                 decoder->enable = false;
1097         else
1098                 decoder->enable = true;
1099
1100         tvp5150_selmux(sd);
1101         return 0;
1102 }
1103
1104 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
1105 {
1106         /* this is for capturing 36 raw vbi lines
1107            if there's a way to cut off the beginning 2 vbi lines
1108            with the tvp5150 then the vbi line count could be lowered
1109            to 17 lines/field again, although I couldn't find a register
1110            which could do that cropping */
1111         if (fmt->sample_format == V4L2_PIX_FMT_GREY)
1112                 tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
1113         if (fmt->count[0] == 18 && fmt->count[1] == 18) {
1114                 tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
1115                 tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
1116         }
1117         return 0;
1118 }
1119
1120 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1121 {
1122         int i;
1123
1124         if (svbi->service_set != 0) {
1125                 for (i = 0; i <= 23; i++) {
1126                         svbi->service_lines[1][i] = 0;
1127                         svbi->service_lines[0][i] =
1128                                 tvp5150_set_vbi(sd, vbi_ram_default,
1129                                        svbi->service_lines[0][i], 0xf0, i, 3);
1130                 }
1131                 /* Enables FIFO */
1132                 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
1133         } else {
1134                 /* Disables FIFO*/
1135                 tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
1136
1137                 /* Disable Full Field */
1138                 tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1139
1140                 /* Disable Line modes */
1141                 for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1142                         tvp5150_write(sd, i, 0xff);
1143         }
1144         return 0;
1145 }
1146
1147 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1148 {
1149         int i, mask = 0;
1150
1151         memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1152
1153         for (i = 0; i <= 23; i++) {
1154                 svbi->service_lines[0][i] =
1155                         tvp5150_get_vbi(sd, vbi_ram_default, i);
1156                 mask |= svbi->service_lines[0][i];
1157         }
1158         svbi->service_set = mask;
1159         return 0;
1160 }
1161
1162 #ifdef CONFIG_VIDEO_ADV_DEBUG
1163 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1164 {
1165         int res;
1166
1167         res = tvp5150_read(sd, reg->reg & 0xff);
1168         if (res < 0) {
1169                 v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
1170                 return res;
1171         }
1172
1173         reg->val = res;
1174         reg->size = 1;
1175         return 0;
1176 }
1177
1178 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1179 {
1180         return tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1181 }
1182 #endif
1183
1184 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1185 {
1186         int status = tvp5150_read(sd, 0x88);
1187
1188         vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1189         return 0;
1190 }
1191
1192 static int tvp5150_registered(struct v4l2_subdev *sd)
1193 {
1194 #ifdef CONFIG_MEDIA_CONTROLLER
1195         struct tvp5150 *decoder = to_tvp5150(sd);
1196         int ret = 0;
1197         int i;
1198
1199         for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1200                 struct media_entity *input = &decoder->input_ent[i];
1201                 struct media_pad *pad = &decoder->input_pad[i];
1202
1203                 if (!input->name)
1204                         continue;
1205
1206                 decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
1207
1208                 ret = media_entity_pads_init(input, 1, pad);
1209                 if (ret < 0)
1210                         return ret;
1211
1212                 ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
1213                 if (ret < 0)
1214                         return ret;
1215
1216                 ret = media_create_pad_link(input, 0, &sd->entity,
1217                                             DEMOD_PAD_IF_INPUT, 0);
1218                 if (ret < 0) {
1219                         media_device_unregister_entity(input);
1220                         return ret;
1221                 }
1222         }
1223 #endif
1224
1225         return 0;
1226 }
1227
1228 /* ----------------------------------------------------------------------- */
1229
1230 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1231         .s_ctrl = tvp5150_s_ctrl,
1232 };
1233
1234 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1235         .log_status = tvp5150_log_status,
1236         .reset = tvp5150_reset,
1237 #ifdef CONFIG_VIDEO_ADV_DEBUG
1238         .g_register = tvp5150_g_register,
1239         .s_register = tvp5150_s_register,
1240 #endif
1241 };
1242
1243 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1244         .g_tuner = tvp5150_g_tuner,
1245 };
1246
1247 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1248         .s_std = tvp5150_s_std,
1249         .s_stream = tvp5150_s_stream,
1250         .s_routing = tvp5150_s_routing,
1251         .g_mbus_config = tvp5150_g_mbus_config,
1252 };
1253
1254 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1255         .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1256         .g_sliced_fmt = tvp5150_g_sliced_fmt,
1257         .s_sliced_fmt = tvp5150_s_sliced_fmt,
1258         .s_raw_fmt = tvp5150_s_raw_fmt,
1259 };
1260
1261 static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
1262         .enum_mbus_code = tvp5150_enum_mbus_code,
1263         .enum_frame_size = tvp5150_enum_frame_size,
1264         .set_fmt = tvp5150_fill_fmt,
1265         .get_fmt = tvp5150_fill_fmt,
1266         .get_selection = tvp5150_get_selection,
1267         .set_selection = tvp5150_set_selection,
1268 };
1269
1270 static const struct v4l2_subdev_ops tvp5150_ops = {
1271         .core = &tvp5150_core_ops,
1272         .tuner = &tvp5150_tuner_ops,
1273         .video = &tvp5150_video_ops,
1274         .vbi = &tvp5150_vbi_ops,
1275         .pad = &tvp5150_pad_ops,
1276 };
1277
1278 static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
1279         .registered = tvp5150_registered,
1280 };
1281
1282
1283 /****************************************************************************
1284                         I2C Client & Driver
1285  ****************************************************************************/
1286
1287 static int tvp5150_detect_version(struct tvp5150 *core)
1288 {
1289         struct v4l2_subdev *sd = &core->sd;
1290         struct i2c_client *c = v4l2_get_subdevdata(sd);
1291         unsigned int i;
1292         u8 regs[4];
1293         int res;
1294
1295         /*
1296          * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1297          * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1298          */
1299         for (i = 0; i < 4; i++) {
1300                 res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1301                 if (res < 0)
1302                         return res;
1303                 regs[i] = res;
1304         }
1305
1306         core->dev_id = (regs[0] << 8) | regs[1];
1307         core->rom_ver = (regs[2] << 8) | regs[3];
1308
1309         v4l2_info(sd, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
1310                   core->dev_id, regs[2], regs[3], c->addr << 1,
1311                   c->adapter->name);
1312
1313         if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
1314                 v4l2_info(sd, "tvp5150a detected.\n");
1315         } else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
1316                 v4l2_info(sd, "tvp5150am1 detected.\n");
1317
1318                 /* ITU-T BT.656.4 timing */
1319                 tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1320         } else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
1321                 v4l2_info(sd, "tvp5151 detected.\n");
1322         } else {
1323                 v4l2_info(sd, "*** unknown tvp%04x chip detected.\n",
1324                           core->dev_id);
1325         }
1326
1327         return 0;
1328 }
1329
1330 static int tvp5150_init(struct i2c_client *c)
1331 {
1332         struct gpio_desc *pdn_gpio;
1333         struct gpio_desc *reset_gpio;
1334
1335         pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
1336         if (IS_ERR(pdn_gpio))
1337                 return PTR_ERR(pdn_gpio);
1338
1339         if (pdn_gpio) {
1340                 gpiod_set_value_cansleep(pdn_gpio, 0);
1341                 /* Delay time between power supplies active and reset */
1342                 msleep(20);
1343         }
1344
1345         reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
1346         if (IS_ERR(reset_gpio))
1347                 return PTR_ERR(reset_gpio);
1348
1349         if (reset_gpio) {
1350                 /* RESETB pulse duration */
1351                 ndelay(500);
1352                 gpiod_set_value_cansleep(reset_gpio, 0);
1353                 /* Delay time between end of reset to I2C active */
1354                 usleep_range(200, 250);
1355         }
1356
1357         return 0;
1358 }
1359
1360 static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
1361 {
1362         struct v4l2_of_endpoint bus_cfg;
1363         struct device_node *ep;
1364 #ifdef CONFIG_MEDIA_CONTROLLER
1365         struct device_node *connectors, *child;
1366         struct media_entity *input;
1367         const char *name;
1368         u32 input_type;
1369 #endif
1370         unsigned int flags;
1371         int ret = 0;
1372
1373         ep = of_graph_get_next_endpoint(np, NULL);
1374         if (!ep)
1375                 return -EINVAL;
1376
1377         ret = v4l2_of_parse_endpoint(ep, &bus_cfg);
1378         if (ret)
1379                 goto err;
1380
1381         flags = bus_cfg.bus.parallel.flags;
1382
1383         if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
1384             !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
1385               flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
1386               flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
1387                 ret = -EINVAL;
1388                 goto err;
1389         }
1390
1391         decoder->mbus_type = bus_cfg.bus_type;
1392
1393 #ifdef CONFIG_MEDIA_CONTROLLER
1394         connectors = of_get_child_by_name(np, "connectors");
1395
1396         if (!connectors)
1397                 goto err;
1398
1399         for_each_available_child_of_node(connectors, child) {
1400                 ret = of_property_read_u32(child, "input", &input_type);
1401                 if (ret) {
1402                         v4l2_err(&decoder->sd,
1403                                  "missing type property in node %s\n",
1404                                  child->name);
1405                         goto err_connector;
1406                 }
1407
1408                 if (input_type >= TVP5150_INPUT_NUM) {
1409                         ret = -EINVAL;
1410                         goto err_connector;
1411                 }
1412
1413                 input = &decoder->input_ent[input_type];
1414
1415                 /* Each input connector can only be defined once */
1416                 if (input->name) {
1417                         v4l2_err(&decoder->sd,
1418                                  "input %s with same type already exists\n",
1419                                  input->name);
1420                         ret = -EINVAL;
1421                         goto err_connector;
1422                 }
1423
1424                 switch (input_type) {
1425                 case TVP5150_COMPOSITE0:
1426                 case TVP5150_COMPOSITE1:
1427                         input->function = MEDIA_ENT_F_CONN_COMPOSITE;
1428                         break;
1429                 case TVP5150_SVIDEO:
1430                         input->function = MEDIA_ENT_F_CONN_SVIDEO;
1431                         break;
1432                 }
1433
1434                 input->flags = MEDIA_ENT_FL_CONNECTOR;
1435
1436                 ret = of_property_read_string(child, "label", &name);
1437                 if (ret < 0) {
1438                         v4l2_err(&decoder->sd,
1439                                  "missing label property in node %s\n",
1440                                  child->name);
1441                         goto err_connector;
1442                 }
1443
1444                 input->name = name;
1445         }
1446
1447 err_connector:
1448         of_node_put(connectors);
1449 #endif
1450 err:
1451         of_node_put(ep);
1452         return ret;
1453 }
1454
1455 static const char * const tvp5150_test_patterns[2] = {
1456         "Disabled",
1457         "Black screen"
1458 };
1459
1460 static int tvp5150_probe(struct i2c_client *c,
1461                          const struct i2c_device_id *id)
1462 {
1463         struct tvp5150 *core;
1464         struct v4l2_subdev *sd;
1465         struct device_node *np = c->dev.of_node;
1466         int res;
1467
1468         /* Check if the adapter supports the needed features */
1469         if (!i2c_check_functionality(c->adapter,
1470              I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1471                 return -EIO;
1472
1473         res = tvp5150_init(c);
1474         if (res)
1475                 return res;
1476
1477         core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1478         if (!core)
1479                 return -ENOMEM;
1480
1481         sd = &core->sd;
1482
1483         if (IS_ENABLED(CONFIG_OF) && np) {
1484                 res = tvp5150_parse_dt(core, np);
1485                 if (res) {
1486                         v4l2_err(sd, "DT parsing error: %d\n", res);
1487                         return res;
1488                 }
1489         } else {
1490                 /* Default to BT.656 embedded sync */
1491                 core->mbus_type = V4L2_MBUS_BT656;
1492         }
1493
1494         v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1495         sd->internal_ops = &tvp5150_internal_ops;
1496         sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1497
1498 #if defined(CONFIG_MEDIA_CONTROLLER)
1499         core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
1500         core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
1501         core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
1502
1503         sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
1504
1505         res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
1506         if (res < 0)
1507                 return res;
1508
1509         sd->entity.ops = &tvp5150_sd_media_ops;
1510 #endif
1511
1512         res = tvp5150_detect_version(core);
1513         if (res < 0)
1514                 return res;
1515
1516         core->norm = V4L2_STD_ALL;      /* Default is autodetect */
1517         core->input = TVP5150_COMPOSITE1;
1518         core->enable = true;
1519
1520         v4l2_ctrl_handler_init(&core->hdl, 5);
1521         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1522                         V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1523         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1524                         V4L2_CID_CONTRAST, 0, 255, 1, 128);
1525         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1526                         V4L2_CID_SATURATION, 0, 255, 1, 128);
1527         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1528                         V4L2_CID_HUE, -128, 127, 1, 0);
1529         v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1530                         V4L2_CID_PIXEL_RATE, 27000000,
1531                         27000000, 1, 27000000);
1532         v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
1533                                      V4L2_CID_TEST_PATTERN,
1534                                      ARRAY_SIZE(tvp5150_test_patterns) - 1,
1535                                      0, 0, tvp5150_test_patterns);
1536         sd->ctrl_handler = &core->hdl;
1537         if (core->hdl.error) {
1538                 res = core->hdl.error;
1539                 goto err;
1540         }
1541
1542         /* Default is no cropping */
1543         core->rect.top = 0;
1544         if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1545                 core->rect.height = TVP5150_V_MAX_525_60;
1546         else
1547                 core->rect.height = TVP5150_V_MAX_OTHERS;
1548         core->rect.left = 0;
1549         core->rect.width = TVP5150_H_MAX;
1550
1551         tvp5150_reset(sd, 0);   /* Calls v4l2_ctrl_handler_setup() */
1552
1553         res = v4l2_async_register_subdev(sd);
1554         if (res < 0)
1555                 goto err;
1556
1557         if (debug > 1)
1558                 tvp5150_log_status(sd);
1559         return 0;
1560
1561 err:
1562         v4l2_ctrl_handler_free(&core->hdl);
1563         return res;
1564 }
1565
1566 static int tvp5150_remove(struct i2c_client *c)
1567 {
1568         struct v4l2_subdev *sd = i2c_get_clientdata(c);
1569         struct tvp5150 *decoder = to_tvp5150(sd);
1570
1571         v4l2_dbg(1, debug, sd,
1572                 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1573                 c->addr << 1);
1574
1575         v4l2_async_unregister_subdev(sd);
1576         v4l2_ctrl_handler_free(&decoder->hdl);
1577         return 0;
1578 }
1579
1580 /* ----------------------------------------------------------------------- */
1581
1582 static const struct i2c_device_id tvp5150_id[] = {
1583         { "tvp5150", 0 },
1584         { }
1585 };
1586 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1587
1588 #if IS_ENABLED(CONFIG_OF)
1589 static const struct of_device_id tvp5150_of_match[] = {
1590         { .compatible = "ti,tvp5150", },
1591         { /* sentinel */ },
1592 };
1593 MODULE_DEVICE_TABLE(of, tvp5150_of_match);
1594 #endif
1595
1596 static struct i2c_driver tvp5150_driver = {
1597         .driver = {
1598                 .of_match_table = of_match_ptr(tvp5150_of_match),
1599                 .name   = "tvp5150",
1600         },
1601         .probe          = tvp5150_probe,
1602         .remove         = tvp5150_remove,
1603         .id_table       = tvp5150_id,
1604 };
1605
1606 module_i2c_driver(tvp5150_driver);