drivers/media/pci/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30 #include <linux/delay.h>
  31 #include <linux/module.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37 #include <net/checksum.h>
  38
  39 #include <asm/unaligned.h>
  40 #include <asm/io.h>
  41
  42 #include "bttvp.h"
  43 #include <media/v4l2-common.h>
  44 #include <media/i2c/tvaudio.h>
  45 #include "bttv-audio-hook.h"
  46
  47 /* fwd decl */
  48 static void boot_msp34xx(struct bttv *btv, int pin);
  49 static void hauppauge_eeprom(struct bttv *btv);
  50 static void avermedia_eeprom(struct bttv *btv);
  51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  52 static void modtec_eeprom(struct bttv *btv);
  53 static void init_PXC200(struct bttv *btv);
  54 static void init_RTV24(struct bttv *btv);
  55 static void init_PCI8604PW(struct bttv *btv);
  56
  57 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  58 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  59 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  60 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  61 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  62
  63 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  64
  65 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  66 static void picolo_tetra_init(struct bttv *btv);
  67
  68 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  69 static void tibetCS16_init(struct bttv *btv);
  70
  71 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  72 static void kodicom4400r_init(struct bttv *btv);
  73
  74 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  75 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  76
  77 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  78
  79 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  80
  81 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  82 static void gv800s_init(struct bttv *btv);
  83
  84 static void td3116_muxsel(struct bttv *btv, unsigned int input);
  85
  86 static int terratec_active_radio_upgrade(struct bttv *btv);
  87 static int tea575x_init(struct bttv *btv);
  88 static void identify_by_eeprom(struct bttv *btv,
  89                                unsigned char eeprom_data[256]);
  90 static int pvr_boot(struct bttv *btv);
  91
  92 /* config variables */
  93 static unsigned int triton1;
  94 static unsigned int vsfx;
  95 static unsigned int latency = UNSET;
  96 int no_overlay=-1;
  97
  98 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int audiodev[BTTV_MAX];
 104 static unsigned int saa6588[BTTV_MAX];
 105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106 static unsigned int autoload = UNSET;
 107 static unsigned int gpiomask = UNSET;
 108 static unsigned int audioall = UNSET;
 109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 110
 111 /* insmod options */
 112 module_param(triton1,    int, 0444);
 113 module_param(vsfx,       int, 0444);
 114 module_param(no_overlay, int, 0444);
 115 module_param(latency,    int, 0444);
 116 module_param(gpiomask,   int, 0444);
 117 module_param(audioall,   int, 0444);
 118 module_param(autoload,   int, 0444);
 119
 120 module_param_array(card,     int, NULL, 0444);
 121 module_param_array(pll,      int, NULL, 0444);
 122 module_param_array(tuner,    int, NULL, 0444);
 123 module_param_array(svhs,     int, NULL, 0444);
 124 module_param_array(remote,   int, NULL, 0444);
 125 module_param_array(audiodev, int, NULL, 0444);
 126 module_param_array(audiomux, int, NULL, 0444);
 127
 128 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
 129 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
 130 MODULE_PARM_DESC(latency,"pci latency timer");
 131 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 132 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
 133 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 134 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 135 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 136                 "\t\t-1 = no audio\n"
 137                 "\t\t 0 = autodetect (default)\n"
 138                 "\t\t 1 = msp3400\n"
 139                 "\t\t 2 = tda7432\n"
 140                 "\t\t 3 = tvaudio");
 141 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 142 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 143
 144 /* ----------------------------------------------------------------------- */
 145 /* list of card IDs for bt878+ cards                                       */
 146
 147 static struct CARD {
 148         unsigned id;
 149         int cardnr;
 150         char *name;
 151 } cards[] = {
 152         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 153         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 154         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 155         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 156         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 157         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 158         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 159         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 160         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 161
 162         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 163         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 164
 165         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 166         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 167         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 168         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 169         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 170         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 171         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 172         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 173         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 174
 175         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 176         /* some cards ship with byteswapped IDs ... */
 177         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 178         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 179         /* this seems to happen as well ... */
 180         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 181
 182         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 183         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 184         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 185
 186         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 187         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 188         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 189         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 190         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 191         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 192         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 193
 194         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 195         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 196         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 197         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 198         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 199
 200         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 201         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 202         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 203         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 204
 205         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 206         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 207         /* clashes with FlyVideo
 208          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 209         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 210         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 211         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 212         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 213
 214         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 215         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 216         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 217         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 218         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 219
 220         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 221         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 222         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 223         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 224         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 225
 226         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 227         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 228         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 229         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 230
 231         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 232         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 233         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 234         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 235
 236         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 237         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 238         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 239         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 240         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 242         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 243         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 244         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 245         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 246         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 247         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 248         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 249         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 261         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 262         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 263         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 264         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 265         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 266         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 267         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 268         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 269
 270         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 271         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 272
 273         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 274         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 275         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 276         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 277         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 278         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 279
 280         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 281         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 282
 283         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 284         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 285         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 286         { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 287         { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 288         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 289         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 290         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 291         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 292         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 293
 294         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 295         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 296
 297         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 298         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 299         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 300         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 301
 302         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 303
 304         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 305         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 306
 307         /* likely broken, vendor id doesn't match the other magic views ...
 308          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 309
 310         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 311         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 312
 313         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 314
 315         /* DVB cards (using pci function .1 for mpeg data xfer) */
 316         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 317         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 318         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 319         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 320         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 321         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 322         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 323         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 324         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 325         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 326         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 327         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 328         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 329         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 330         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 331         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 332         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 333         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 334         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 335
 336         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 337         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 338         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 339         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 340         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 341         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 342         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 343         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 344         { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 345         { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 346         { 0, -1, NULL }
 347 };
 348
 349 /* ----------------------------------------------------------------------- */
 350 /* array with description for bt848 / bt878 tv/grabber cards               */
 351
 352 struct tvcard bttv_tvcards[] = {
 353         /* ---- card 0x00 ---------------------------------- */
 354         [BTTV_BOARD_UNKNOWN] = {
 355                 .name           = " *** UNKNOWN/GENERIC *** ",
 356                 .video_inputs   = 4,
 357                 .svhs           = 2,
 358                 .muxsel         = MUXSEL(2, 3, 1, 0),
 359                 .tuner_type     = UNSET,
 360                 .tuner_addr     = ADDR_UNSET,
 361         },
 362         [BTTV_BOARD_MIRO] = {
 363                 .name           = "MIRO PCTV",
 364                 .video_inputs   = 4,
 365                 /* .audio_inputs= 1, */
 366                 .svhs           = 2,
 367                 .gpiomask       = 15,
 368                 .muxsel         = MUXSEL(2, 3, 1, 1),
 369                 .gpiomux        = { 2, 0, 0, 0 },
 370                 .gpiomute       = 10,
 371                 .tuner_type     = UNSET,
 372                 .tuner_addr     = ADDR_UNSET,
 373         },
 374         [BTTV_BOARD_HAUPPAUGE] = {
 375                 .name           = "Hauppauge (bt848)",
 376                 .video_inputs   = 4,
 377                 /* .audio_inputs= 1, */
 378                 .svhs           = 2,
 379                 .gpiomask       = 7,
 380                 .muxsel         = MUXSEL(2, 3, 1, 1),
 381                 .gpiomux        = { 0, 1, 2, 3 },
 382                 .gpiomute       = 4,
 383                 .tuner_type     = UNSET,
 384                 .tuner_addr     = ADDR_UNSET,
 385         },
 386         [BTTV_BOARD_STB] = {
 387                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 388                 .video_inputs   = 3,
 389                 /* .audio_inputs= 1, */
 390                 .svhs           = 2,
 391                 .gpiomask       = 7,
 392                 .muxsel         = MUXSEL(2, 3, 1, 1),
 393                 .gpiomux        = { 4, 0, 2, 3 },
 394                 .gpiomute       = 1,
 395                 .no_msp34xx     = 1,
 396                 .tuner_type     = TUNER_PHILIPS_NTSC,
 397                 .tuner_addr     = ADDR_UNSET,
 398                 .pll            = PLL_28,
 399                 .has_radio      = 1,
 400         },
 401
 402         /* ---- card 0x04 ---------------------------------- */
 403         [BTTV_BOARD_INTEL] = {
 404                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 405                 .video_inputs   = 4,
 406                 /* .audio_inputs= 0, */
 407                 .svhs           = 2,
 408                 .gpiomask       = 0,
 409                 .muxsel         = MUXSEL(2, 3, 1, 1),
 410                 .gpiomux        = { 0 },
 411                 .tuner_type     = TUNER_ABSENT,
 412                 .tuner_addr     = ADDR_UNSET,
 413         },
 414         [BTTV_BOARD_DIAMOND] = {
 415                 .name           = "Diamond DTV2000",
 416                 .video_inputs   = 4,
 417                 /* .audio_inputs= 1, */
 418                 .svhs           = 2,
 419                 .gpiomask       = 3,
 420                 .muxsel         = MUXSEL(2, 3, 1, 0),
 421                 .gpiomux        = { 0, 1, 0, 1 },
 422                 .gpiomute       = 3,
 423                 .tuner_type     = UNSET,
 424                 .tuner_addr     = ADDR_UNSET,
 425         },
 426         [BTTV_BOARD_AVERMEDIA] = {
 427                 .name           = "AVerMedia TVPhone",
 428                 .video_inputs   = 3,
 429                 /* .audio_inputs= 1, */
 430                 .svhs           = 3,
 431                 .muxsel         = MUXSEL(2, 3, 1, 1),
 432                 .gpiomask       = 0x0f,
 433                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 434                 /*                0x04 for some cards ?? */
 435                 .tuner_type     = UNSET,
 436                 .tuner_addr     = ADDR_UNSET,
 437                 .audio_mode_gpio= avermedia_tvphone_audio,
 438                 .has_remote     = 1,
 439         },
 440         [BTTV_BOARD_MATRIX_VISION] = {
 441                 .name           = "MATRIX-Vision MV-Delta",
 442                 .video_inputs   = 5,
 443                 /* .audio_inputs= 1, */
 444                 .svhs           = 3,
 445                 .gpiomask       = 0,
 446                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 447                 .gpiomux        = { 0 },
 448                 .tuner_type     = TUNER_ABSENT,
 449                 .tuner_addr     = ADDR_UNSET,
 450         },
 451
 452         /* ---- card 0x08 ---------------------------------- */
 453         [BTTV_BOARD_FLYVIDEO] = {
 454                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 455                 .video_inputs   = 4,
 456                 /* .audio_inputs= 1, */
 457                 .svhs           = 2,
 458                 .gpiomask       = 0xc00,
 459                 .muxsel         = MUXSEL(2, 3, 1, 1),
 460                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 461                 .gpiomute       = 0xc00,
 462                 .pll            = PLL_28,
 463                 .tuner_type     = UNSET,
 464                 .tuner_addr     = ADDR_UNSET,
 465         },
 466         [BTTV_BOARD_TURBOTV] = {
 467                 .name           = "IMS/IXmicro TurboTV",
 468                 .video_inputs   = 3,
 469                 /* .audio_inputs= 1, */
 470                 .svhs           = 2,
 471                 .gpiomask       = 3,
 472                 .muxsel         = MUXSEL(2, 3, 1, 1),
 473                 .gpiomux        = { 1, 1, 2, 3 },
 474                 .pll            = PLL_28,
 475                 .tuner_type     = TUNER_TEMIC_PAL,
 476                 .tuner_addr     = ADDR_UNSET,
 477         },
 478         [BTTV_BOARD_HAUPPAUGE878] = {
 479                 .name           = "Hauppauge (bt878)",
 480                 .video_inputs   = 4,
 481                 /* .audio_inputs= 1, */
 482                 .svhs           = 2,
 483                 .gpiomask       = 0x0f, /* old: 7 */
 484                 .muxsel         = MUXSEL(2, 0, 1, 1),
 485                 .gpiomux        = { 0, 1, 2, 3 },
 486                 .gpiomute       = 4,
 487                 .pll            = PLL_28,
 488                 .tuner_type     = UNSET,
 489                 .tuner_addr     = ADDR_UNSET,
 490         },
 491         [BTTV_BOARD_MIROPRO] = {
 492                 .name           = "MIRO PCTV pro",
 493                 .video_inputs   = 3,
 494                 /* .audio_inputs= 1, */
 495                 .svhs           = 2,
 496                 .gpiomask       = 0x3014f,
 497                 .muxsel         = MUXSEL(2, 3, 1, 1),
 498                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 499                 .gpiomute       = 10,
 500                 .tuner_type     = UNSET,
 501                 .tuner_addr     = ADDR_UNSET,
 502         },
 503
 504         /* ---- card 0x0c ---------------------------------- */
 505         [BTTV_BOARD_ADSTECH_TV] = {
 506                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 507                 .video_inputs   = 3,
 508                 /* .audio_inputs= 1, */
 509                 .svhs           = 2,
 510                 .gpiomask       = 15,
 511                 .muxsel         = MUXSEL(2, 3, 1, 1),
 512                 .gpiomux        = { 13, 14, 11, 7 },
 513                 .tuner_type     = UNSET,
 514                 .tuner_addr     = ADDR_UNSET,
 515         },
 516         [BTTV_BOARD_AVERMEDIA98] = {
 517                 .name           = "AVerMedia TVCapture 98",
 518                 .video_inputs   = 3,
 519                 /* .audio_inputs= 4, */
 520                 .svhs           = 2,
 521                 .gpiomask       = 15,
 522                 .muxsel         = MUXSEL(2, 3, 1, 1),
 523                 .gpiomux        = { 13, 14, 11, 7 },
 524                 .msp34xx_alt    = 1,
 525                 .pll            = PLL_28,
 526                 .tuner_type     = TUNER_PHILIPS_PAL,
 527                 .tuner_addr     = ADDR_UNSET,
 528                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 529                 .no_gpioirq     = 1,
 530         },
 531         [BTTV_BOARD_VHX] = {
 532                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 533                 .video_inputs   = 3,
 534                 /* .audio_inputs= 1, */
 535                 .svhs           = 2,
 536                 .gpiomask       = 7,
 537                 .muxsel         = MUXSEL(2, 3, 1, 1),
 538                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 539                 .gpiomute       = 4,
 540                 .pll            = PLL_28,
 541                 .tuner_type     = UNSET,
 542                 .tuner_addr     = ADDR_UNSET,
 543         },
 544         [BTTV_BOARD_ZOLTRIX] = {
 545                 .name           = "Zoltrix TV-Max",
 546                 .video_inputs   = 3,
 547                 /* .audio_inputs= 1, */
 548                 .svhs           = 2,
 549                 .gpiomask       = 15,
 550                 .muxsel         = MUXSEL(2, 3, 1, 1),
 551                 .gpiomux        = { 0, 0, 1, 0 },
 552                 .gpiomute       = 10,
 553                 .tuner_type     = UNSET,
 554                 .tuner_addr     = ADDR_UNSET,
 555         },
 556
 557         /* ---- card 0x10 ---------------------------------- */
 558         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 559                 .name           = "Prolink Pixelview PlayTV (bt878)",
 560                 .video_inputs   = 3,
 561                 /* .audio_inputs= 1, */
 562                 .svhs           = 2,
 563                 .gpiomask       = 0x01fe00,
 564                 .muxsel         = MUXSEL(2, 3, 1, 1),
 565                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 566                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 567                 .gpiomute       = 0x002000,
 568                 .pll            = PLL_28,
 569                 .tuner_type     = UNSET,
 570                 .tuner_addr     = ADDR_UNSET,
 571         },
 572         [BTTV_BOARD_WINVIEW_601] = {
 573                 .name           = "Leadtek WinView 601",
 574                 .video_inputs   = 3,
 575                 /* .audio_inputs= 1, */
 576                 .svhs           = 2,
 577                 .gpiomask       = 0x8300f8,
 578                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 579                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 580                 .gpiomute       = 0xcfa007,
 581                 .tuner_type     = UNSET,
 582                 .tuner_addr     = ADDR_UNSET,
 583                 .volume_gpio    = winview_volume,
 584                 .has_radio      = 1,
 585         },
 586         [BTTV_BOARD_AVEC_INTERCAP] = {
 587                 .name           = "AVEC Intercapture",
 588                 .video_inputs   = 3,
 589                 /* .audio_inputs= 2, */
 590                 .svhs           = 2,
 591                 .gpiomask       = 0,
 592                 .muxsel         = MUXSEL(2, 3, 1, 1),
 593                 .gpiomux        = { 1, 0, 0, 0 },
 594                 .tuner_type     = UNSET,
 595                 .tuner_addr     = ADDR_UNSET,
 596         },
 597         [BTTV_BOARD_LIFE_FLYKIT] = {
 598                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 599                 .video_inputs   = 4,
 600                 /* .audio_inputs= 1, */
 601                 .svhs           = NO_SVHS,
 602                 .gpiomask       = 0x8dff00,
 603                 .muxsel         = MUXSEL(2, 3, 1, 1),
 604                 .gpiomux        = { 0 },
 605                 .no_msp34xx     = 1,
 606                 .tuner_type     = TUNER_ABSENT,
 607                 .tuner_addr     = ADDR_UNSET,
 608         },
 609
 610         /* ---- card 0x14 ---------------------------------- */
 611         [BTTV_BOARD_CEI_RAFFLES] = {
 612                 .name           = "CEI Raffles Card",
 613                 .video_inputs   = 3,
 614                 /* .audio_inputs= 3, */
 615                 .svhs           = 2,
 616                 .muxsel         = MUXSEL(2, 3, 1, 1),
 617                 .tuner_type     = UNSET,
 618                 .tuner_addr     = ADDR_UNSET,
 619         },
 620         [BTTV_BOARD_CONFERENCETV] = {
 621                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 622                 .video_inputs   = 4,
 623                 /* .audio_inputs= 2,  tuner, line in */
 624                 .svhs           = 2,
 625                 .gpiomask       = 0x1800,
 626                 .muxsel         = MUXSEL(2, 3, 1, 1),
 627                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 628                 .gpiomute       = 0x1800,
 629                 .pll            = PLL_28,
 630                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 631                 .tuner_addr     = ADDR_UNSET,
 632         },
 633         [BTTV_BOARD_PHOEBE_TVMAS] = {
 634                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 635                 .video_inputs   = 3,
 636                 /* .audio_inputs= 1, */
 637                 .svhs           = 2,
 638                 .gpiomask       = 0xc00,
 639                 .muxsel         = MUXSEL(2, 3, 1, 1),
 640                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 641                 .gpiomute       = 0xc00,
 642                 .pll            = PLL_28,
 643                 .tuner_type     = UNSET,
 644                 .tuner_addr     = ADDR_UNSET,
 645         },
 646         [BTTV_BOARD_MODTEC_205] = {
 647                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 648                 .video_inputs   = 3,
 649                 /* .audio_inputs= 1, */
 650                 .svhs           = NO_SVHS,
 651                 .has_dig_in     = 1,
 652                 .gpiomask       = 7,
 653                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 654                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 655                 .gpiomux        = { 0, 0, 0, 0 },
 656                 .no_msp34xx     = 1,
 657                 .pll            = PLL_28,
 658                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 659                 .tuner_addr     = ADDR_UNSET,
 660         },
 661
 662         /* ---- card 0x18 ---------------------------------- */
 663         [BTTV_BOARD_MAGICTVIEW061] = {
 664                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 665                 .video_inputs   = 3,
 666                 /* .audio_inputs= 1, */
 667                 .svhs           = 2,
 668                 .gpiomask       = 0xe00,
 669                 .muxsel         = MUXSEL(2, 3, 1, 1),
 670                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 671                 .gpiomute       = 0xc00,
 672                 .pll            = PLL_28,
 673                 .tuner_type     = UNSET,
 674                 .tuner_addr     = ADDR_UNSET,
 675                 .has_remote     = 1,
 676                 .has_radio      = 1,  /* not every card has radio */
 677         },
 678         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 679                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 680                 .video_inputs   = 3,
 681                 /* .audio_inputs= 1, */
 682                 .svhs           = 2,
 683                 .gpiomask       = 0x1f0fff,
 684                 .muxsel         = MUXSEL(2, 3, 1, 1),
 685                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 686                 .gpiomute       = 0x40000,
 687                 .tuner_type     = TUNER_PHILIPS_PAL,
 688                 .tuner_addr     = ADDR_UNSET,
 689                 .audio_mode_gpio= terratv_audio,
 690         },
 691         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 692                 .name           = "Hauppauge WinCam newer (bt878)",
 693                 .video_inputs   = 4,
 694                 /* .audio_inputs= 1, */
 695                 .svhs           = 3,
 696                 .gpiomask       = 7,
 697                 .muxsel         = MUXSEL(2, 0, 1, 1),
 698                 .gpiomux        = { 0, 1, 2, 3 },
 699                 .gpiomute       = 4,
 700                 .tuner_type     = UNSET,
 701                 .tuner_addr     = ADDR_UNSET,
 702         },
 703         [BTTV_BOARD_MAXI] = {
 704                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 705                 .video_inputs   = 4,
 706                 /* .audio_inputs= 2, */
 707                 .svhs           = 2,
 708                 .gpiomask       = 0x1800,
 709                 .muxsel         = MUXSEL(2, 3, 1, 1),
 710                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 711                 .gpiomute       = 0x1800,
 712                 .pll            = PLL_28,
 713                 .tuner_type     = TUNER_PHILIPS_SECAM,
 714                 .tuner_addr     = ADDR_UNSET,
 715         },
 716
 717         /* ---- card 0x1c ---------------------------------- */
 718         [BTTV_BOARD_TERRATV] = {
 719                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 720                 .video_inputs   = 3,
 721                 /* .audio_inputs= 1, */
 722                 .svhs           = 2,
 723                 .gpiomask       = 0x1f0fff,
 724                 .muxsel         = MUXSEL(2, 3, 1, 1),
 725                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 726                 .gpiomute       = 0x40000,
 727                 .tuner_type     = TUNER_PHILIPS_PAL,
 728                 .tuner_addr     = ADDR_UNSET,
 729                 .audio_mode_gpio= terratv_audio,
 730                 /* GPIO wiring:
 731                 External 20 pin connector (for Active Radio Upgrade board)
 732                 gpio00: i2c-sda
 733                 gpio01: i2c-scl
 734                 gpio02: om5610-data
 735                 gpio03: om5610-clk
 736                 gpio04: om5610-wre
 737                 gpio05: om5610-stereo
 738                 gpio06: rds6588-davn
 739                 gpio07: Pin 7 n.c.
 740                 gpio08: nIOW
 741                 gpio09+10: nIOR, nSEL ?? (bt878)
 742                         gpio09: nIOR (bt848)
 743                         gpio10: nSEL (bt848)
 744                 Sound Routing:
 745                 gpio16: u2-A0 (1st 4052bt)
 746                 gpio17: u2-A1
 747                 gpio18: u2-nEN
 748                 gpio19: u4-A0 (2nd 4052)
 749                 gpio20: u4-A1
 750                         u4-nEN - GND
 751                 Btspy:
 752                         00000 : Cdrom (internal audio input)
 753                         10000 : ext. Video audio input
 754                         20000 : TV Mono
 755                         a0000 : TV Mono/2
 756                 1a0000 : TV Stereo
 757                         30000 : Radio
 758                         40000 : Mute
 759         */
 760
 761         },
 762         [BTTV_BOARD_PXC200] = {
 763                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 764                 .name           = "Imagenation PXC200",
 765                 .video_inputs   = 5,
 766                 /* .audio_inputs= 1, */
 767                 .svhs           = 1, /* was: 4 */
 768                 .gpiomask       = 0,
 769                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 770                 .gpiomux        = { 0 },
 771                 .tuner_type     = TUNER_ABSENT,
 772                 .tuner_addr     = ADDR_UNSET,
 773                 .muxsel_hook    = PXC200_muxsel,
 774
 775         },
 776         [BTTV_BOARD_FLYVIDEO_98] = {
 777                 .name           = "Lifeview FlyVideo 98 LR50",
 778                 .video_inputs   = 4,
 779                 /* .audio_inputs= 1, */
 780                 .svhs           = 2,
 781                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 782                 .muxsel         = MUXSEL(2, 3, 1, 1),
 783                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 784                 .gpiomute       = 0x1800,
 785                 .pll            = PLL_28,
 786                 .tuner_type     = UNSET,
 787                 .tuner_addr     = ADDR_UNSET,
 788         },
 789         [BTTV_BOARD_IPROTV] = {
 790                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 791                 .video_inputs   = 4,
 792                 /* .audio_inputs= 1, */
 793                 .svhs           = 3,
 794                 .gpiomask       = 1,
 795                 .muxsel         = MUXSEL(2, 3, 1, 1),
 796                 .gpiomux        = { 1, 0, 0, 0 },
 797                 .pll            = PLL_28,
 798                 .tuner_type     = TUNER_PHILIPS_PAL,
 799                 .tuner_addr     = ADDR_UNSET,
 800         },
 801
 802         /* ---- card 0x20 ---------------------------------- */
 803         [BTTV_BOARD_INTEL_C_S_PCI] = {
 804                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 805                 .video_inputs   = 4,
 806                 /* .audio_inputs= 0, */
 807                 .svhs           = 2,
 808                 .gpiomask       = 0,
 809                 .muxsel         = MUXSEL(2, 3, 1, 1),
 810                 .gpiomux        = { 0 },
 811                 .tuner_type     = TUNER_ABSENT,
 812                 .tuner_addr     = ADDR_UNSET,
 813         },
 814         [BTTV_BOARD_TERRATVALUE] = {
 815                 .name           = "Terratec TerraTValue Version Bt878",
 816                 .video_inputs   = 3,
 817                 /* .audio_inputs= 1, */
 818                 .svhs           = 2,
 819                 .gpiomask       = 0xffff00,
 820                 .muxsel         = MUXSEL(2, 3, 1, 1),
 821                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 822                 .gpiomute       = 0x900,
 823                 .pll            = PLL_28,
 824                 .tuner_type     = TUNER_PHILIPS_PAL,
 825                 .tuner_addr     = ADDR_UNSET,
 826         },
 827         [BTTV_BOARD_WINFAST2000] = {
 828                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 829                 .video_inputs   = 4,
 830                 /* .audio_inputs= 1, */
 831                 .svhs           = 2,
 832                 /* TV, CVid, SVid, CVid over SVid connector */
 833                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 834                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 835                 .gpiomask       = 0xb33000,
 836                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 837                 .gpiomute       = 0x800000,
 838                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 839                         gpio23 -- hef4052:nEnable (0x800000)
 840                         gpio12 -- hef4052:A1
 841                         gpio13 -- hef4052:A0
 842                 0x0000: external audio
 843                 0x1000: FM
 844                 0x2000: TV
 845                 0x3000: n.c.
 846                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 847                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 848                 */
 849                 .pll            = PLL_28,
 850                 .has_radio      = 1,
 851                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 852                 .tuner_addr     = ADDR_UNSET,
 853                 .audio_mode_gpio= winfast2000_audio,
 854                 .has_remote     = 1,
 855         },
 856         [BTTV_BOARD_CHRONOS_VS2] = {
 857                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 858                 .video_inputs   = 4,
 859                 /* .audio_inputs= 3, */
 860                 .svhs           = 2,
 861                 .gpiomask       = 0x1800,
 862                 .muxsel         = MUXSEL(2, 3, 1, 1),
 863                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 864                 .gpiomute       = 0x1800,
 865                 .pll            = PLL_28,
 866                 .tuner_type     = UNSET,
 867                 .tuner_addr     = ADDR_UNSET,
 868         },
 869
 870         /* ---- card 0x24 ---------------------------------- */
 871         [BTTV_BOARD_TYPHOON_TVIEW] = {
 872                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 873                 .video_inputs   = 4,
 874                 /* .audio_inputs= 3, */
 875                 .svhs           = 2,
 876                 .gpiomask       = 0x1800,
 877                 .muxsel         = MUXSEL(2, 3, 1, 1),
 878                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 879                 .gpiomute       = 0x1800,
 880                 .pll            = PLL_28,
 881                 .tuner_type     = UNSET,
 882                 .tuner_addr     = ADDR_UNSET,
 883                 .has_radio      = 1,
 884         },
 885         [BTTV_BOARD_PXELVWPLTVPRO] = {
 886                 .name           = "Prolink PixelView PlayTV pro",
 887                 .video_inputs   = 3,
 888                 /* .audio_inputs= 1, */
 889                 .svhs           = 2,
 890                 .gpiomask       = 0xff,
 891                 .muxsel         = MUXSEL(2, 3, 1, 1),
 892                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 893                 .gpiomute       = 0x29,
 894                 .no_msp34xx     = 1,
 895                 .pll            = PLL_28,
 896                 .tuner_type     = UNSET,
 897                 .tuner_addr     = ADDR_UNSET,
 898         },
 899         [BTTV_BOARD_MAGICTVIEW063] = {
 900                 .name           = "Askey CPH06X TView99",
 901                 .video_inputs   = 4,
 902                 /* .audio_inputs= 1, */
 903                 .svhs           = 2,
 904                 .gpiomask       = 0x551e00,
 905                 .muxsel         = MUXSEL(2, 3, 1, 0),
 906                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 907                 .gpiomute       = 0x551c00,
 908                 .pll            = PLL_28,
 909                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 910                 .tuner_addr     = ADDR_UNSET,
 911                 .has_remote     = 1,
 912         },
 913         [BTTV_BOARD_PINNACLE] = {
 914                 .name           = "Pinnacle PCTV Studio/Rave",
 915                 .video_inputs   = 3,
 916                 /* .audio_inputs= 1, */
 917                 .svhs           = 2,
 918                 .gpiomask       = 0x03000F,
 919                 .muxsel         = MUXSEL(2, 3, 1, 1),
 920                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 921                 .gpiomute       = 1,
 922                 .pll            = PLL_28,
 923                 .tuner_type     = UNSET,
 924                 .tuner_addr     = ADDR_UNSET,
 925         },
 926
 927         /* ---- card 0x28 ---------------------------------- */
 928         [BTTV_BOARD_STB2] = {
 929                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 930                 .video_inputs   = 3,
 931                 /* .audio_inputs= 1, */
 932                 .svhs           = 2,
 933                 .gpiomask       = 7,
 934                 .muxsel         = MUXSEL(2, 3, 1, 1),
 935                 .gpiomux        = { 4, 0, 2, 3 },
 936                 .gpiomute       = 1,
 937                 .no_msp34xx     = 1,
 938                 .tuner_type     = TUNER_PHILIPS_NTSC,
 939                 .tuner_addr     = ADDR_UNSET,
 940                 .pll            = PLL_28,
 941                 .has_radio      = 1,
 942         },
 943         [BTTV_BOARD_AVPHONE98] = {
 944                 .name           = "AVerMedia TVPhone 98",
 945                 .video_inputs   = 3,
 946                 /* .audio_inputs= 4, */
 947                 .svhs           = 2,
 948                 .gpiomask       = 15,
 949                 .muxsel         = MUXSEL(2, 3, 1, 1),
 950                 .gpiomux        = { 13, 4, 11, 7 },
 951                 .pll            = PLL_28,
 952                 .tuner_type     = UNSET,
 953                 .tuner_addr     = ADDR_UNSET,
 954                 .has_radio      = 1,
 955                 .audio_mode_gpio= avermedia_tvphone_audio,
 956         },
 957         [BTTV_BOARD_PV951] = {
 958                 .name           = "ProVideo PV951", /* pic16c54 */
 959                 .video_inputs   = 3,
 960                 /* .audio_inputs= 1, */
 961                 .svhs           = 2,
 962                 .gpiomask       = 0,
 963                 .muxsel         = MUXSEL(2, 3, 1, 1),
 964                 .gpiomux        = { 0, 0, 0, 0},
 965                 .no_msp34xx     = 1,
 966                 .pll            = PLL_28,
 967                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 968                 .tuner_addr     = ADDR_UNSET,
 969         },
 970         [BTTV_BOARD_ONAIR_TV] = {
 971                 .name           = "Little OnAir TV",
 972                 .video_inputs   = 3,
 973                 /* .audio_inputs= 1, */
 974                 .svhs           = 2,
 975                 .gpiomask       = 0xe00b,
 976                 .muxsel         = MUXSEL(2, 3, 1, 1),
 977                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 978                 .gpiomute       = 0xff3ffc,
 979                 .no_msp34xx     = 1,
 980                 .tuner_type     = UNSET,
 981                 .tuner_addr     = ADDR_UNSET,
 982         },
 983
 984         /* ---- card 0x2c ---------------------------------- */
 985         [BTTV_BOARD_SIGMA_TVII_FM] = {
 986                 .name           = "Sigma TVII-FM",
 987                 .video_inputs   = 2,
 988                 /* .audio_inputs= 1, */
 989                 .svhs           = NO_SVHS,
 990                 .gpiomask       = 3,
 991                 .muxsel         = MUXSEL(2, 3, 1, 1),
 992                 .gpiomux        = { 1, 1, 0, 2 },
 993                 .gpiomute       = 3,
 994                 .no_msp34xx     = 1,
 995                 .pll            = PLL_NONE,
 996                 .tuner_type     = UNSET,
 997                 .tuner_addr     = ADDR_UNSET,
 998         },
 999         [BTTV_BOARD_MATRIX_VISION2] = {
1000                 .name           = "MATRIX-Vision MV-Delta 2",
1001                 .video_inputs   = 5,
1002                 /* .audio_inputs= 1, */
1003                 .svhs           = 3,
1004                 .gpiomask       = 0,
1005                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1006                 .gpiomux        = { 0 },
1007                 .no_msp34xx     = 1,
1008                 .pll            = PLL_28,
1009                 .tuner_type     = TUNER_ABSENT,
1010                 .tuner_addr     = ADDR_UNSET,
1011         },
1012         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1013                 .name           = "Zoltrix Genie TV/FM",
1014                 .video_inputs   = 3,
1015                 /* .audio_inputs= 1, */
1016                 .svhs           = 2,
1017                 .gpiomask       = 0xbcf03f,
1018                 .muxsel         = MUXSEL(2, 3, 1, 1),
1019                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1020                 .gpiomute       = 0xbcb03f,
1021                 .no_msp34xx     = 1,
1022                 .pll            = PLL_28,
1023                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1024                 .tuner_addr     = ADDR_UNSET,
1025         },
1026         [BTTV_BOARD_TERRATVRADIO] = {
1027                 .name           = "Terratec TV/Radio+",
1028                 .video_inputs   = 3,
1029                 /* .audio_inputs= 1, */
1030                 .svhs           = 2,
1031                 .gpiomask       = 0x70000,
1032                 .muxsel         = MUXSEL(2, 3, 1, 1),
1033                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1034                 .gpiomute       = 0x40000,
1035                 .no_msp34xx     = 1,
1036                 .pll            = PLL_35,
1037                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1038                 .tuner_addr     = ADDR_UNSET,
1039                 .has_radio      = 1,
1040         },
1041
1042         /* ---- card 0x30 ---------------------------------- */
1043         [BTTV_BOARD_DYNALINK] = {
1044                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1045                 .video_inputs   = 3,
1046                 /* .audio_inputs= 1, */
1047                 .svhs           = 2,
1048                 .gpiomask       = 15,
1049                 .muxsel         = MUXSEL(2, 3, 1, 1),
1050                 .gpiomux        = {2,0,0,0 },
1051                 .gpiomute       = 1,
1052                 .pll            = PLL_28,
1053                 .tuner_type     = UNSET,
1054                 .tuner_addr     = ADDR_UNSET,
1055         },
1056         [BTTV_BOARD_GVBCTV3PCI] = {
1057                 .name           = "IODATA GV-BCTV3/PCI",
1058                 .video_inputs   = 3,
1059                 /* .audio_inputs= 1, */
1060                 .svhs           = 2,
1061                 .gpiomask       = 0x010f00,
1062                 .muxsel         = MUXSEL(2, 3, 0, 0),
1063                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1064                 .no_msp34xx     = 1,
1065                 .pll            = PLL_28,
1066                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1067                 .tuner_addr     = ADDR_UNSET,
1068                 .audio_mode_gpio= gvbctv3pci_audio,
1069         },
1070         [BTTV_BOARD_PXELVWPLTVPAK] = {
1071                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1072                 .video_inputs   = 5,
1073                 /* .audio_inputs= 1, */
1074                 .svhs           = 3,
1075                 .has_dig_in     = 1,
1076                 .gpiomask       = 0xAA0000,
1077                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1078                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1079                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1080                 .gpiomute       = 0xa8000,
1081                 .no_msp34xx     = 1,
1082                 .pll            = PLL_28,
1083                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1084                 .tuner_addr     = ADDR_UNSET,
1085                 .has_remote     = 1,
1086                 /* GPIO wiring: (different from Rev.4C !)
1087                         GPIO17: U4.A0 (first hef4052bt)
1088                         GPIO19: U4.A1
1089                         GPIO20: U5.A1 (second hef4052bt)
1090                         GPIO21: U4.nEN
1091                         GPIO22: BT832 Reset Line
1092                         GPIO23: A5,A0, U5,nEN
1093                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1094                 */
1095         },
1096         [BTTV_BOARD_EAGLE] = {
1097                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1098                 .video_inputs   = 4,
1099                 /* .audio_inputs= 1, */
1100                 .svhs           = 2,
1101                 .gpiomask       = 7,
1102                 .muxsel         = MUXSEL(2, 0, 1, 1),
1103                 .gpiomux        = { 0, 1, 2, 3 },
1104                 .gpiomute       = 4,
1105                 .pll            = PLL_28,
1106                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1107                 .tuner_addr     = ADDR_UNSET,
1108         },
1109
1110         /* ---- card 0x34 ---------------------------------- */
1111         [BTTV_BOARD_PINNACLEPRO] = {
1112                 /* David Härdeman <david@2gen.com> */
1113                 .name           = "Pinnacle PCTV Studio Pro",
1114                 .video_inputs   = 4,
1115                 /* .audio_inputs= 1, */
1116                 .svhs           = 3,
1117                 .gpiomask       = 0x03000F,
1118                 .muxsel         = MUXSEL(2, 3, 1, 1),
1119                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1120                 .gpiomute       = 10,
1121                                 /* sound path (5 sources):
1122                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1123                                         0= ext. Audio IN
1124                                         1= from MUX2
1125                                         2= Mono TV sound from Tuner
1126                                         3= not connected
1127                                 MUX2 (mask 0x30000):
1128                                         0,2,3= from MSP34xx
1129                                         1= FM stereo Radio from Tuner */
1130                 .pll            = PLL_28,
1131                 .tuner_type     = UNSET,
1132                 .tuner_addr     = ADDR_UNSET,
1133         },
1134         [BTTV_BOARD_TVIEW_RDS_FM] = {
1135                 /* Claas Langbehn <claas@bigfoot.com>,
1136                 Sven Grothklags <sven@upb.de> */
1137                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1138                 .video_inputs   = 4,
1139                 /* .audio_inputs= 3, */
1140                 .svhs           = 2,
1141                 .gpiomask       = 0x1c,
1142                 .muxsel         = MUXSEL(2, 3, 1, 1),
1143                 .gpiomux        = { 0, 0, 0x10, 8 },
1144                 .gpiomute       = 4,
1145                 .pll            = PLL_28,
1146                 .tuner_type     = TUNER_PHILIPS_PAL,
1147                 .tuner_addr     = ADDR_UNSET,
1148                 .has_radio      = 1,
1149         },
1150         [BTTV_BOARD_LIFETEC_9415] = {
1151                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1152                 in de.comp.os.unix.linux.hardware:
1153                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1154                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1155                         options tuner type=5 */
1156                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1157                 .video_inputs   = 4,
1158                 /* .audio_inputs= 1, */
1159                 .svhs           = 2,
1160                 .gpiomask       = 0x18e0,
1161                 .muxsel         = MUXSEL(2, 3, 1, 1),
1162                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1163                 .gpiomute       = 0x18e0,
1164                         /* For cards with tda9820/tda9821:
1165                                 0x0000: Tuner normal stereo
1166                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1167                                 0x0880: Tuner A2 stereo */
1168                 .pll            = PLL_28,
1169                 .tuner_type     = UNSET,
1170                 .tuner_addr     = ADDR_UNSET,
1171         },
1172         [BTTV_BOARD_BESTBUY_EASYTV] = {
1173                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1174                 old Easy TV BT848 version (model CPH031) */
1175                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1176                 .video_inputs   = 4,
1177                 /* .audio_inputs= 1, */
1178                 .svhs           = 2,
1179                 .gpiomask       = 0xF,
1180                 .muxsel         = MUXSEL(2, 3, 1, 0),
1181                 .gpiomux        = { 2, 0, 0, 0 },
1182                 .gpiomute       = 10,
1183                 .pll            = PLL_28,
1184                 .tuner_type     = TUNER_TEMIC_PAL,
1185                 .tuner_addr     = ADDR_UNSET,
1186         },
1187
1188         /* ---- card 0x38 ---------------------------------- */
1189         [BTTV_BOARD_FLYVIDEO_98FM] = {
1190                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1191                 .name           = "Lifeview FlyVideo 98FM LR50",
1192                 .video_inputs   = 4,
1193                 /* .audio_inputs= 3, */
1194                 .svhs           = 2,
1195                 .gpiomask       = 0x1800,
1196                 .muxsel         = MUXSEL(2, 3, 1, 1),
1197                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1198                 .gpiomute       = 0x1800,
1199                 .pll            = PLL_28,
1200                 .tuner_type     = TUNER_PHILIPS_PAL,
1201                 .tuner_addr     = ADDR_UNSET,
1202         },
1203                 /* This is the ultimate cheapo capture card
1204                 * just a BT848A on a small PCB!
1205                 * Steve Hosgood <steve@equiinet.com> */
1206         [BTTV_BOARD_GRANDTEC] = {
1207                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1208                 .video_inputs   = 2,
1209                 /* .audio_inputs= 0, */
1210                 .svhs           = 1,
1211                 .gpiomask       = 0,
1212                 .muxsel         = MUXSEL(3, 1),
1213                 .gpiomux        = { 0 },
1214                 .no_msp34xx     = 1,
1215                 .pll            = PLL_35,
1216                 .tuner_type     = TUNER_ABSENT,
1217                 .tuner_addr     = ADDR_UNSET,
1218         },
1219         [BTTV_BOARD_ASKEY_CPH060] = {
1220                 /* Daniel Herrington <daniel.herrington@home.com> */
1221                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1222                 .video_inputs   = 3,
1223                 /* .audio_inputs= 1, */
1224                 .svhs           = 2,
1225                 .gpiomask       = 0xe00,
1226                 .muxsel         = MUXSEL(2, 3, 1, 1),
1227                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1228                 .gpiomute       = 0x800,
1229                 .pll            = PLL_28,
1230                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1231                 .tuner_addr     = ADDR_UNSET,
1232         },
1233         [BTTV_BOARD_ASKEY_CPH03X] = {
1234                 /* Matti Mottus <mottus@physic.ut.ee> */
1235                 .name           = "Askey CPH03x TV Capturer",
1236                 .video_inputs   = 4,
1237                 /* .audio_inputs= 1, */
1238                 .svhs           = 2,
1239                 .gpiomask       = 0x03000F,
1240                 .muxsel         = MUXSEL(2, 3, 1, 0),
1241                 .gpiomux        = { 2, 0, 0, 0 },
1242                 .gpiomute       = 1,
1243                 .pll            = PLL_28,
1244                 .tuner_type     = TUNER_TEMIC_PAL,
1245                 .tuner_addr     = ADDR_UNSET,
1246                 .has_remote     = 1,
1247         },
1248
1249         /* ---- card 0x3c ---------------------------------- */
1250         [BTTV_BOARD_MM100PCTV] = {
1251                 /* Philip Blundell <philb@gnu.org> */
1252                 .name           = "Modular Technology MM100PCTV",
1253                 .video_inputs   = 2,
1254                 /* .audio_inputs= 2, */
1255                 .svhs           = NO_SVHS,
1256                 .gpiomask       = 11,
1257                 .muxsel         = MUXSEL(2, 3, 1, 1),
1258                 .gpiomux        = { 2, 0, 0, 1 },
1259                 .gpiomute       = 8,
1260                 .pll            = PLL_35,
1261                 .tuner_type     = TUNER_TEMIC_PAL,
1262                 .tuner_addr     = ADDR_UNSET,
1263         },
1264         [BTTV_BOARD_GMV1] = {
1265                 /* Adrian Cox <adrian@humboldt.co.uk */
1266                 .name           = "AG Electronics GMV1",
1267                 .video_inputs   = 2,
1268                 /* .audio_inputs= 0, */
1269                 .svhs           = 1,
1270                 .gpiomask       = 0xF,
1271                 .muxsel         = MUXSEL(2, 2),
1272                 .gpiomux        = { },
1273                 .no_msp34xx     = 1,
1274                 .pll            = PLL_28,
1275                 .tuner_type     = TUNER_ABSENT,
1276                 .tuner_addr     = ADDR_UNSET,
1277         },
1278         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1279                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1280                 new Easy TV BT878 version (model CPH061)
1281                 special thanks to Informatica Mieres for providing the card */
1282                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1283                 .video_inputs   = 3,
1284                 /* .audio_inputs= 2, */
1285                 .svhs           = 2,
1286                 .gpiomask       = 0xFF,
1287                 .muxsel         = MUXSEL(2, 3, 1, 0),
1288                 .gpiomux        = { 1, 0, 4, 4 },
1289                 .gpiomute       = 9,
1290                 .pll            = PLL_28,
1291                 .tuner_type     = TUNER_PHILIPS_PAL,
1292                 .tuner_addr     = ADDR_UNSET,
1293         },
1294         [BTTV_BOARD_ATI_TVWONDER] = {
1295                 /* Lukas Gebauer <geby@volny.cz> */
1296                 .name           = "ATI TV-Wonder",
1297                 .video_inputs   = 3,
1298                 /* .audio_inputs= 1, */
1299                 .svhs           = 2,
1300                 .gpiomask       = 0xf03f,
1301                 .muxsel         = MUXSEL(2, 3, 1, 0),
1302                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1303                 .gpiomute       = 0xbffe,
1304                 .pll            = PLL_28,
1305                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1306                 .tuner_addr     = ADDR_UNSET,
1307         },
1308
1309         /* ---- card 0x40 ---------------------------------- */
1310         [BTTV_BOARD_ATI_TVWONDERVE] = {
1311                 /* Lukas Gebauer <geby@volny.cz> */
1312                 .name           = "ATI TV-Wonder VE",
1313                 .video_inputs   = 2,
1314                 /* .audio_inputs= 1, */
1315                 .svhs           = NO_SVHS,
1316                 .gpiomask       = 1,
1317                 .muxsel         = MUXSEL(2, 3, 0, 1),
1318                 .gpiomux        = { 0, 0, 1, 0 },
1319                 .no_msp34xx     = 1,
1320                 .pll            = PLL_28,
1321                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1322                 .tuner_addr     = ADDR_UNSET,
1323         },
1324         [BTTV_BOARD_FLYVIDEO2000] = {
1325                 /* DeeJay <deejay@westel900.net (2000S) */
1326                 .name           = "Lifeview FlyVideo 2000S LR90",
1327                 .video_inputs   = 3,
1328                 /* .audio_inputs= 3, */
1329                 .svhs           = 2,
1330                 .gpiomask       = 0x18e0,
1331                 .muxsel         = MUXSEL(2, 3, 0, 1),
1332                                 /* Radio changed from 1e80 to 0x800 to make
1333                                 FlyVideo2000S in .hu happy (gm)*/
1334                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1335                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1336                 .gpiomute       = 0x1800,
1337                 .audio_mode_gpio= fv2000s_audio,
1338                 .no_msp34xx     = 1,
1339                 .pll            = PLL_28,
1340                 .tuner_type     = TUNER_PHILIPS_PAL,
1341                 .tuner_addr     = ADDR_UNSET,
1342         },
1343         [BTTV_BOARD_TERRATVALUER] = {
1344                 .name           = "Terratec TValueRadio",
1345                 .video_inputs   = 3,
1346                 /* .audio_inputs= 1, */
1347                 .svhs           = 2,
1348                 .gpiomask       = 0xffff00,
1349                 .muxsel         = MUXSEL(2, 3, 1, 1),
1350                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1351                 .gpiomute       = 0x900,
1352                 .pll            = PLL_28,
1353                 .tuner_type     = TUNER_PHILIPS_PAL,
1354                 .tuner_addr     = ADDR_UNSET,
1355                 .has_radio      = 1,
1356         },
1357         [BTTV_BOARD_GVBCTV4PCI] = {
1358                 /* TANAKA Kei <peg00625@nifty.com> */
1359                 .name           = "IODATA GV-BCTV4/PCI",
1360                 .video_inputs   = 3,
1361                 /* .audio_inputs= 1, */
1362                 .svhs           = 2,
1363                 .gpiomask       = 0x010f00,
1364                 .muxsel         = MUXSEL(2, 3, 0, 0),
1365                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1366                 .no_msp34xx     = 1,
1367                 .pll            = PLL_28,
1368                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1369                 .tuner_addr     = ADDR_UNSET,
1370                 .audio_mode_gpio= gvbctv3pci_audio,
1371         },
1372
1373         /* ---- card 0x44 ---------------------------------- */
1374         [BTTV_BOARD_VOODOOTV_FM] = {
1375                 .name           = "3Dfx VoodooTV FM (Euro)",
1376                 /* try "insmod msp3400 simple=0" if you have
1377                 * sound problems with this card. */
1378                 .video_inputs   = 4,
1379                 /* .audio_inputs= 1, */
1380                 .svhs           = NO_SVHS,
1381                 .gpiomask       = 0x4f8a00,
1382                 /* 0x100000: 1=MSP enabled (0=disable again)
1383                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1384                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1385                 .gpiomute       = 0x947fff,
1386                 /* tvtuner, radio,   external,internal, mute,  stereo
1387                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1388                 .muxsel         = MUXSEL(2, 3, 0, 1),
1389                 .tuner_type     = TUNER_MT2032,
1390                 .tuner_addr     = ADDR_UNSET,
1391                 .pll            = PLL_28,
1392                 .has_radio      = 1,
1393         },
1394         [BTTV_BOARD_VOODOOTV_200] = {
1395                 .name           = "VoodooTV 200 (USA)",
1396                 /* try "insmod msp3400 simple=0" if you have
1397                 * sound problems with this card. */
1398                 .video_inputs   = 4,
1399                 /* .audio_inputs= 1, */
1400                 .svhs           = NO_SVHS,
1401                 .gpiomask       = 0x4f8a00,
1402                 /* 0x100000: 1=MSP enabled (0=disable again)
1403                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1404                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1405                 .gpiomute       = 0x947fff,
1406                 /* tvtuner, radio,   external,internal, mute,  stereo
1407                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1408                 .muxsel         = MUXSEL(2, 3, 0, 1),
1409                 .tuner_type     = TUNER_MT2032,
1410                 .tuner_addr     = ADDR_UNSET,
1411                 .pll            = PLL_28,
1412                 .has_radio      = 1,
1413         },
1414         [BTTV_BOARD_AIMMS] = {
1415                 /* Philip Blundell <pb@nexus.co.uk> */
1416                 .name           = "Active Imaging AIMMS",
1417                 .video_inputs   = 1,
1418                 /* .audio_inputs= 0, */
1419                 .tuner_type     = TUNER_ABSENT,
1420                 .tuner_addr     = ADDR_UNSET,
1421                 .pll            = PLL_28,
1422                 .muxsel         = MUXSEL(2),
1423                 .gpiomask       = 0
1424         },
1425         [BTTV_BOARD_PV_BT878P_PLUS] = {
1426                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1427                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1428                 .video_inputs   = 3,
1429                 /* .audio_inputs= 4, */
1430                 .svhs           = 2,
1431                 .gpiomask       = 15,
1432                 .muxsel         = MUXSEL(2, 3, 1, 1),
1433                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1434                 .gpiomute       = 13,
1435                 .pll            = PLL_28,
1436                 .tuner_type     = TUNER_LG_PAL_I_FM,
1437                 .tuner_addr     = ADDR_UNSET,
1438                 .has_remote     = 1,
1439                 /* GPIO wiring:
1440                         GPIO0: U4.A0 (hef4052bt)
1441                         GPIO1: U4.A1
1442                         GPIO2: U4.A1 (second hef4052bt)
1443                         GPIO3: U4.nEN, U5.A0, A5.nEN
1444                         GPIO8-15: vrd866b ?
1445                 */
1446         },
1447         [BTTV_BOARD_FLYVIDEO98EZ] = {
1448                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1449                 .video_inputs   = 4,
1450                 /* .audio_inputs= 0, */
1451                 .svhs           = 2,
1452                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1453                 .muxsel         = MUXSEL(2, 3, 1, 1),
1454                 .pll            = PLL_28,
1455                 .no_msp34xx     = 1,
1456                 .tuner_type     = TUNER_ABSENT,
1457                 .tuner_addr     = ADDR_UNSET,
1458         },
1459
1460         /* ---- card 0x48 ---------------------------------- */
1461         [BTTV_BOARD_PV_BT878P_9B] = {
1462                 /* Dariusz Kowalewski <darekk@automex.pl> */
1463                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1464                 .video_inputs   = 4,
1465                 /* .audio_inputs= 1, */
1466                 .svhs           = 2,
1467                 .gpiomask       = 0x3f,
1468                 .muxsel         = MUXSEL(2, 3, 1, 1),
1469                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1470                 .gpiomute       = 0x09,
1471                 .no_msp34xx     = 1,
1472                 .pll            = PLL_28,
1473                 .tuner_type     = TUNER_PHILIPS_PAL,
1474                 .tuner_addr     = ADDR_UNSET,
1475                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1476                 .has_radio      = 1,  /* Note: not all cards have radio */
1477                 .has_remote     = 1,
1478                 /* GPIO wiring:
1479                         GPIO0: A0 hef4052
1480                         GPIO1: A1 hef4052
1481                         GPIO3: nEN hef4052
1482                         GPIO8-15: vrd866b
1483                         GPIO20,22,23: R30,R29,R28
1484                 */
1485         },
1486         [BTTV_BOARD_SENSORAY311_611] = {
1487                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1488                 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1489                 .name           = "Sensoray 311/611",
1490                 .video_inputs   = 5,
1491                 /* .audio_inputs= 0, */
1492                 .svhs           = 4,
1493                 .gpiomask       = 0,
1494                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1495                 .gpiomux        = { 0 },
1496                 .tuner_type     = TUNER_ABSENT,
1497                 .tuner_addr     = ADDR_UNSET,
1498         },
1499         [BTTV_BOARD_RV605] = {
1500                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1501                 .name           = "RemoteVision MX (RV605)",
1502                 .video_inputs   = 16,
1503                 /* .audio_inputs= 0, */
1504                 .svhs           = NO_SVHS,
1505                 .gpiomask       = 0x00,
1506                 .gpiomask2      = 0x07ff,
1507                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1508                 .no_msp34xx     = 1,
1509                 .tuner_type     = TUNER_ABSENT,
1510                 .tuner_addr     = ADDR_UNSET,
1511                 .muxsel_hook    = rv605_muxsel,
1512         },
1513         [BTTV_BOARD_POWERCLR_MTV878] = {
1514                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1515                 .video_inputs   = 3,
1516                 /* .audio_inputs= 2, */
1517                 .svhs           = 2,
1518                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1519                 .muxsel         = MUXSEL(2, 1, 1),
1520                 .gpiomux        = { 0, 1, 2, 2 },
1521                 .gpiomute       = 4,
1522                 .tuner_type     = TUNER_PHILIPS_PAL,
1523                 .tuner_addr     = ADDR_UNSET,
1524                 .pll            = PLL_28,
1525                 .has_radio      = 1,
1526         },
1527
1528         /* ---- card 0x4c ---------------------------------- */
1529         [BTTV_BOARD_WINDVR] = {
1530                 /* Masaki Suzuki <masaki@btree.org> */
1531                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1532                 .video_inputs   = 3,
1533                 /* .audio_inputs= 1, */
1534                 .svhs           = 2,
1535                 .gpiomask       = 0x140007,
1536                 .muxsel         = MUXSEL(2, 3, 1, 1),
1537                 .gpiomux        = { 0, 1, 2, 3 },
1538                 .gpiomute       = 4,
1539                 .tuner_type     = TUNER_PHILIPS_NTSC,
1540                 .tuner_addr     = ADDR_UNSET,
1541                 .audio_mode_gpio= windvr_audio,
1542         },
1543         [BTTV_BOARD_GRANDTEC_MULTI] = {
1544                 .name           = "GrandTec Multi Capture Card (Bt878)",
1545                 .video_inputs   = 4,
1546                 /* .audio_inputs= 0, */
1547                 .svhs           = NO_SVHS,
1548                 .gpiomask       = 0,
1549                 .muxsel         = MUXSEL(2, 3, 1, 0),
1550                 .gpiomux        = { 0 },
1551                 .no_msp34xx     = 1,
1552                 .pll            = PLL_28,
1553                 .tuner_type     = TUNER_ABSENT,
1554                 .tuner_addr     = ADDR_UNSET,
1555         },
1556         [BTTV_BOARD_KWORLD] = {
1557                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1558                 .video_inputs   = 4,
1559                 /* .audio_inputs= 3, */
1560                 .svhs           = 2,
1561                 .gpiomask       = 7,
1562                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1563                 .muxsel         = MUXSEL(2, 3, 1, 1),
1564                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1565                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1566                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1567                                                 * This card lacks PCI subsystem ID, sigh.
1568                                                 * gpiomux =1: lower volume, 2+3: mute
1569                                                 * btwincap uses 0x80000/0x80003
1570                                                 */
1571                 .gpiomute       = 4,
1572                 .no_msp34xx     = 1,
1573                 .pll            = PLL_28,
1574                 .tuner_type     = TUNER_PHILIPS_PAL,
1575                 .tuner_addr     = ADDR_UNSET,
1576                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1577                 radio signal strength indicators work fine. */
1578                 .has_radio      = 1,
1579                 /* GPIO Info:
1580                         GPIO0,1:   HEF4052 A0,A1
1581                         GPIO2:     HEF4052 nENABLE
1582                         GPIO3-7:   n.c.
1583                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1584                         GPIO14,15: ??
1585                         GPIO16-21: n.c.
1586                         GPIO22,23: ??
1587                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1588         },
1589         [BTTV_BOARD_DSP_TCVIDEO] = {
1590                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1591                 .name           = "DSP Design TCVIDEO",
1592                 .video_inputs   = 4,
1593                 .svhs           = NO_SVHS,
1594                 .muxsel         = MUXSEL(2, 3, 1, 0),
1595                 .pll            = PLL_28,
1596                 .tuner_type     = UNSET,
1597                 .tuner_addr     = ADDR_UNSET,
1598         },
1599
1600                 /* ---- card 0x50 ---------------------------------- */
1601         [BTTV_BOARD_HAUPPAUGEPVR] = {
1602                 .name           = "Hauppauge WinTV PVR",
1603                 .video_inputs   = 4,
1604                 /* .audio_inputs= 1, */
1605                 .svhs           = 2,
1606                 .muxsel         = MUXSEL(2, 0, 1, 1),
1607                 .pll            = PLL_28,
1608                 .tuner_type     = UNSET,
1609                 .tuner_addr     = ADDR_UNSET,
1610
1611                 .gpiomask       = 7,
1612                 .gpiomux        = {7},
1613         },
1614         [BTTV_BOARD_GVBCTV5PCI] = {
1615                 .name           = "IODATA GV-BCTV5/PCI",
1616                 .video_inputs   = 3,
1617                 /* .audio_inputs= 1, */
1618                 .svhs           = 2,
1619                 .gpiomask       = 0x0f0f80,
1620                 .muxsel         = MUXSEL(2, 3, 1, 0),
1621                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1622                 .gpiomute       = 0x020000,
1623                 .no_msp34xx     = 1,
1624                 .pll            = PLL_28,
1625                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1626                 .tuner_addr     = ADDR_UNSET,
1627                 .audio_mode_gpio= gvbctv5pci_audio,
1628                 .has_radio      = 1,
1629         },
1630         [BTTV_BOARD_OSPREY1x0] = {
1631                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1632                 .video_inputs   = 4,                  /* id-inputs-clock */
1633                 /* .audio_inputs= 0, */
1634                 .svhs           = 3,
1635                 .muxsel         = MUXSEL(3, 2, 0, 1),
1636                 .pll            = PLL_28,
1637                 .tuner_type     = TUNER_ABSENT,
1638                 .tuner_addr     = ADDR_UNSET,
1639                 .no_msp34xx     = 1,
1640                 .no_tda7432     = 1,
1641         },
1642         [BTTV_BOARD_OSPREY1x0_848] = {
1643                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1644                 .video_inputs   = 3,
1645                 /* .audio_inputs= 0, */
1646                 .svhs           = 2,
1647                 .muxsel         = MUXSEL(2, 3, 1),
1648                 .pll            = PLL_28,
1649                 .tuner_type     = TUNER_ABSENT,
1650                 .tuner_addr     = ADDR_UNSET,
1651                 .no_msp34xx     = 1,
1652                 .no_tda7432     = 1,
1653         },
1654
1655                 /* ---- card 0x54 ---------------------------------- */
1656         [BTTV_BOARD_OSPREY101_848] = {
1657                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1658                 .video_inputs   = 2,
1659                 /* .audio_inputs= 0, */
1660                 .svhs           = 1,
1661                 .muxsel         = MUXSEL(3, 1),
1662                 .pll            = PLL_28,
1663                 .tuner_type     = TUNER_ABSENT,
1664                 .tuner_addr     = ADDR_UNSET,
1665                 .no_msp34xx     = 1,
1666                 .no_tda7432     = 1,
1667         },
1668         [BTTV_BOARD_OSPREY1x1] = {
1669                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1670                 .video_inputs   = 1,
1671                 /* .audio_inputs= 0, */
1672                 .svhs           = NO_SVHS,
1673                 .muxsel         = MUXSEL(0),
1674                 .pll            = PLL_28,
1675                 .tuner_type     = TUNER_ABSENT,
1676                 .tuner_addr     = ADDR_UNSET,
1677                 .no_msp34xx     = 1,
1678                 .no_tda7432     = 1,
1679         },
1680         [BTTV_BOARD_OSPREY1x1_SVID] = {
1681                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1682                 .video_inputs   = 2,
1683                 /* .audio_inputs= 0, */
1684                 .svhs           = 1,
1685                 .muxsel         = MUXSEL(0, 1),
1686                 .pll            = PLL_28,
1687                 .tuner_type     = TUNER_ABSENT,
1688                 .tuner_addr     = ADDR_UNSET,
1689                 .no_msp34xx     = 1,
1690                 .no_tda7432     = 1,
1691         },
1692         [BTTV_BOARD_OSPREY2xx] = {
1693                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1694                 .video_inputs   = 1,
1695                 /* .audio_inputs= 1, */
1696                 .svhs           = NO_SVHS,
1697                 .muxsel         = MUXSEL(0),
1698                 .pll            = PLL_28,
1699                 .tuner_type     = TUNER_ABSENT,
1700                 .tuner_addr     = ADDR_UNSET,
1701                 .no_msp34xx     = 1,
1702                 .no_tda7432     = 1,
1703         },
1704
1705                 /* ---- card 0x58 ---------------------------------- */
1706         [BTTV_BOARD_OSPREY2x0_SVID] = {
1707                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1708                 .video_inputs   = 2,
1709                 /* .audio_inputs= 1, */
1710                 .svhs           = 1,
1711                 .muxsel         = MUXSEL(0, 1),
1712                 .pll            = PLL_28,
1713                 .tuner_type     = TUNER_ABSENT,
1714                 .tuner_addr     = ADDR_UNSET,
1715                 .no_msp34xx     = 1,
1716                 .no_tda7432     = 1,
1717         },
1718         [BTTV_BOARD_OSPREY2x0] = {
1719                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1720                 .video_inputs   = 2,
1721                 /* .audio_inputs= 1, */
1722                 .svhs           = 1,
1723                 .muxsel         = MUXSEL(2, 3),
1724                 .pll            = PLL_28,
1725                 .tuner_type     = TUNER_ABSENT,
1726                 .tuner_addr     = ADDR_UNSET,
1727                 .no_msp34xx     = 1,
1728                 .no_tda7432     = 1,
1729         },
1730         [BTTV_BOARD_OSPREY500] = {
1731                 .name           = "Osprey 500",   /* 500 */
1732                 .video_inputs   = 2,
1733                 /* .audio_inputs= 1, */
1734                 .svhs           = 1,
1735                 .muxsel         = MUXSEL(2, 3),
1736                 .pll            = PLL_28,
1737                 .tuner_type     = TUNER_ABSENT,
1738                 .tuner_addr     = ADDR_UNSET,
1739                 .no_msp34xx     = 1,
1740                 .no_tda7432     = 1,
1741         },
1742         [BTTV_BOARD_OSPREY540] = {
1743                 .name           = "Osprey 540",   /* 540 */
1744                 .video_inputs   = 4,
1745                 /* .audio_inputs= 1, */
1746                 .pll            = PLL_28,
1747                 .tuner_type     = TUNER_ABSENT,
1748                 .tuner_addr     = ADDR_UNSET,
1749                 .no_msp34xx     = 1,
1750                 .no_tda7432     = 1,
1751         },
1752
1753                 /* ---- card 0x5C ---------------------------------- */
1754         [BTTV_BOARD_OSPREY2000] = {
1755                 .name           = "Osprey 2000",  /* 2000 */
1756                 .video_inputs   = 2,
1757                 /* .audio_inputs= 1, */
1758                 .svhs           = 1,
1759                 .muxsel         = MUXSEL(2, 3),
1760                 .pll            = PLL_28,
1761                 .tuner_type     = TUNER_ABSENT,
1762                 .tuner_addr     = ADDR_UNSET,
1763                 .no_msp34xx     = 1,
1764                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1765         },
1766         [BTTV_BOARD_IDS_EAGLE] = {
1767                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1768                 .name           = "IDS Eagle",
1769                 .video_inputs   = 4,
1770                 /* .audio_inputs= 0, */
1771                 .tuner_type     = TUNER_ABSENT,
1772                 .tuner_addr     = ADDR_UNSET,
1773                 .svhs           = NO_SVHS,
1774                 .gpiomask       = 0,
1775                 .muxsel         = MUXSEL(2, 2, 2, 2),
1776                 .muxsel_hook    = eagle_muxsel,
1777                 .no_msp34xx     = 1,
1778                 .pll            = PLL_28,
1779         },
1780         [BTTV_BOARD_PINNACLESAT] = {
1781                 .name           = "Pinnacle PCTV Sat",
1782                 .video_inputs   = 2,
1783                 /* .audio_inputs= 0, */
1784                 .svhs           = 1,
1785                 .tuner_type     = TUNER_ABSENT,
1786                 .tuner_addr     = ADDR_UNSET,
1787                 .no_msp34xx     = 1,
1788                 .no_tda7432     = 1,
1789                 .muxsel         = MUXSEL(3, 1),
1790                 .pll            = PLL_28,
1791                 .no_gpioirq     = 1,
1792                 .has_dvb        = 1,
1793         },
1794         [BTTV_BOARD_FORMAC_PROTV] = {
1795                 .name           = "Formac ProTV II (bt878)",
1796                 .video_inputs   = 4,
1797                 /* .audio_inputs= 1, */
1798                 .svhs           = 3,
1799                 .gpiomask       = 2,
1800                 /* TV, Comp1, Composite over SVID con, SVID */
1801                 .muxsel         = MUXSEL(2, 3, 1, 1),
1802                 .gpiomux        = { 2, 2, 0, 0 },
1803                 .pll            = PLL_28,
1804                 .has_radio      = 1,
1805                 .tuner_type     = TUNER_PHILIPS_PAL,
1806                 .tuner_addr     = ADDR_UNSET,
1807         /* sound routing:
1808                 GPIO=0x00,0x01,0x03: mute (?)
1809                 0x02: both TV and radio (tuner: FM1216/I)
1810                 The card has onboard audio connectors labeled "cdrom" and "board",
1811                 not soldered here, though unknown wiring.
1812                 Card lacks: external audio in, pci subsystem id.
1813         */
1814         },
1815
1816                 /* ---- card 0x60 ---------------------------------- */
1817         [BTTV_BOARD_MACHTV] = {
1818                 .name           = "MachTV",
1819                 .video_inputs   = 3,
1820                 /* .audio_inputs= 1, */
1821                 .svhs           = NO_SVHS,
1822                 .gpiomask       = 7,
1823                 .muxsel         = MUXSEL(2, 3, 1, 1),
1824                 .gpiomux        = { 0, 1, 2, 3},
1825                 .gpiomute       = 4,
1826                 .tuner_type     = TUNER_PHILIPS_PAL,
1827                 .tuner_addr     = ADDR_UNSET,
1828                 .pll            = PLL_28,
1829         },
1830         [BTTV_BOARD_EURESYS_PICOLO] = {
1831                 .name           = "Euresys Picolo",
1832                 .video_inputs   = 3,
1833                 /* .audio_inputs= 0, */
1834                 .svhs           = 2,
1835                 .gpiomask       = 0,
1836                 .no_msp34xx     = 1,
1837                 .no_tda7432     = 1,
1838                 .muxsel         = MUXSEL(2, 0, 1),
1839                 .pll            = PLL_28,
1840                 .tuner_type     = TUNER_ABSENT,
1841                 .tuner_addr     = ADDR_UNSET,
1842         },
1843         [BTTV_BOARD_PV150] = {
1844                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1845                 .name           = "ProVideo PV150", /* 0x4f */
1846                 .video_inputs   = 2,
1847                 /* .audio_inputs= 0, */
1848                 .svhs           = NO_SVHS,
1849                 .gpiomask       = 0,
1850                 .muxsel         = MUXSEL(2, 3),
1851                 .gpiomux        = { 0 },
1852                 .no_msp34xx     = 1,
1853                 .pll            = PLL_28,
1854                 .tuner_type     = TUNER_ABSENT,
1855                 .tuner_addr     = ADDR_UNSET,
1856         },
1857         [BTTV_BOARD_AD_TVK503] = {
1858                 /* Hiroshi Takekawa <sian@big.or.jp> */
1859                 /* This card lacks subsystem ID */
1860                 .name           = "AD-TVK503", /* 0x63 */
1861                 .video_inputs   = 4,
1862                 /* .audio_inputs= 1, */
1863                 .svhs           = 2,
1864                 .gpiomask       = 0x001e8007,
1865                 .muxsel         = MUXSEL(2, 3, 1, 0),
1866                 /*                  Tuner, Radio, external, internal, off,  on */
1867                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1868                 .gpiomute       = 0x0f,
1869                 .no_msp34xx     = 1,
1870                 .pll            = PLL_28,
1871                 .tuner_type     = TUNER_PHILIPS_NTSC,
1872                 .tuner_addr     = ADDR_UNSET,
1873                 .audio_mode_gpio= adtvk503_audio,
1874         },
1875
1876                 /* ---- card 0x64 ---------------------------------- */
1877         [BTTV_BOARD_HERCULES_SM_TV] = {
1878                 .name           = "Hercules Smart TV Stereo",
1879                 .video_inputs   = 4,
1880                 /* .audio_inputs= 1, */
1881                 .svhs           = 2,
1882                 .gpiomask       = 0x00,
1883                 .muxsel         = MUXSEL(2, 3, 1, 1),
1884                 .no_msp34xx     = 1,
1885                 .pll            = PLL_28,
1886                 .tuner_type     = TUNER_PHILIPS_PAL,
1887                 .tuner_addr     = ADDR_UNSET,
1888                 /* Notes:
1889                 - card lacks subsystem ID
1890                 - stereo variant w/ daughter board with tda9874a @0xb0
1891                 - Audio Routing:
1892                         always from tda9874 independent of GPIO (?)
1893                         external line in: unknown
1894                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1895                         hef4053 (instead 4052) for unknown function
1896                 */
1897         },
1898         [BTTV_BOARD_PACETV] = {
1899                 .name           = "Pace TV & Radio Card",
1900                 .video_inputs   = 4,
1901                 /* .audio_inputs= 1, */
1902                 .svhs           = 2,
1903                 /* Tuner, CVid, SVid, CVid over SVid connector */
1904                 .muxsel         = MUXSEL(2, 3, 1, 1),
1905                 .gpiomask       = 0,
1906                 .no_tda7432     = 1,
1907                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1908                 .tuner_addr     = ADDR_UNSET,
1909                 .has_radio      = 1,
1910                 .pll            = PLL_28,
1911                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1912                 only internal line out: (4pin header) RGGL
1913                 Radio must be decoded by msp3410d (not routed through)*/
1914                 /*
1915                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1916                 */
1917         },
1918         [BTTV_BOARD_IVC200] = {
1919                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1920                 .name           = "IVC-200",
1921                 .video_inputs   = 1,
1922                 /* .audio_inputs= 0, */
1923                 .tuner_type     = TUNER_ABSENT,
1924                 .tuner_addr     = ADDR_UNSET,
1925                 .svhs           = NO_SVHS,
1926                 .gpiomask       = 0xdf,
1927                 .muxsel         = MUXSEL(2),
1928                 .pll            = PLL_28,
1929         },
1930         [BTTV_BOARD_IVCE8784] = {
1931                 .name           = "IVCE-8784",
1932                 .video_inputs   = 1,
1933                 /* .audio_inputs= 0, */
1934                 .tuner_type     = TUNER_ABSENT,
1935                 .tuner_addr     = ADDR_UNSET,
1936                 .svhs           = NO_SVHS,
1937                 .gpiomask       = 0xdf,
1938                 .muxsel         = MUXSEL(2),
1939                 .pll            = PLL_28,
1940         },
1941         [BTTV_BOARD_XGUARD] = {
1942                 .name           = "Grand X-Guard / Trust 814PCI",
1943                 .video_inputs   = 16,
1944                 /* .audio_inputs= 0, */
1945                 .svhs           = NO_SVHS,
1946                 .tuner_type     = TUNER_ABSENT,
1947                 .tuner_addr     = ADDR_UNSET,
1948                 .gpiomask2      = 0xff,
1949                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1950                 .muxsel_hook    = xguard_muxsel,
1951                 .no_msp34xx     = 1,
1952                 .no_tda7432     = 1,
1953                 .pll            = PLL_28,
1954         },
1955
1956                 /* ---- card 0x68 ---------------------------------- */
1957         [BTTV_BOARD_NEBULA_DIGITV] = {
1958                 .name           = "Nebula Electronics DigiTV",
1959                 .video_inputs   = 1,
1960                 .svhs           = NO_SVHS,
1961                 .muxsel         = MUXSEL(2, 3, 1, 0),
1962                 .no_msp34xx     = 1,
1963                 .no_tda7432     = 1,
1964                 .pll            = PLL_28,
1965                 .tuner_type     = TUNER_ABSENT,
1966                 .tuner_addr     = ADDR_UNSET,
1967                 .has_dvb        = 1,
1968                 .has_remote     = 1,
1969                 .gpiomask       = 0x1b,
1970                 .no_gpioirq     = 1,
1971         },
1972         [BTTV_BOARD_PV143] = {
1973                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1974                 .name           = "ProVideo PV143",
1975                 .video_inputs   = 4,
1976                 /* .audio_inputs= 0, */
1977                 .svhs           = NO_SVHS,
1978                 .gpiomask       = 0,
1979                 .muxsel         = MUXSEL(2, 3, 1, 0),
1980                 .gpiomux        = { 0 },
1981                 .no_msp34xx     = 1,
1982                 .pll            = PLL_28,
1983                 .tuner_type     = TUNER_ABSENT,
1984                 .tuner_addr     = ADDR_UNSET,
1985         },
1986         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1987                 /* M.Klahr@phytec.de */
1988                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1989                 .video_inputs   = 4,
1990                 /* .audio_inputs= 0, */
1991                 .svhs           = 3,
1992                 .gpiomask       = 0x00,
1993                 .muxsel         = MUXSEL(2, 3, 1, 0),
1994                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1995                 .pll            = PLL_28,
1996                 .tuner_type     = TUNER_ABSENT,
1997                 .tuner_addr     = ADDR_UNSET,
1998         },
1999         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2000                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2001                 .video_inputs   = 4,
2002                 /* .audio_inputs= 0, */
2003                 .svhs           = 3,
2004                 .gpiomask       = 0x00,
2005                 .muxsel         = MUXSEL(2, 3, 1, 1),
2006                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2007                 .pll            = PLL_28,
2008                 .tuner_type     = TUNER_ABSENT,
2009                 .tuner_addr     = ADDR_UNSET,
2010         },
2011
2012                 /* ---- card 0x6c ---------------------------------- */
2013         [BTTV_BOARD_VD009_MINIDIN] = {
2014                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2015                 .video_inputs   = 10,
2016                 /* .audio_inputs= 0, */
2017                 .svhs           = 9,
2018                 .gpiomask       = 0x00,
2019                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2020                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2021                 .muxsel_hook    = phytec_muxsel,
2022                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2023                 .pll            = PLL_28,
2024                 .tuner_type     = TUNER_ABSENT,
2025                 .tuner_addr     = ADDR_UNSET,
2026         },
2027         [BTTV_BOARD_VD009_COMBI] = {
2028                 .name           = "PHYTEC VD-009 Combi (bt878)",
2029                 .video_inputs   = 10,
2030                 /* .audio_inputs= 0, */
2031                 .svhs           = 9,
2032                 .gpiomask       = 0x00,
2033                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2034                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2035                 .muxsel_hook    = phytec_muxsel,
2036                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2037                 .pll            = PLL_28,
2038                 .tuner_type     = TUNER_ABSENT,
2039                 .tuner_addr     = ADDR_UNSET,
2040         },
2041         [BTTV_BOARD_IVC100] = {
2042                 .name           = "IVC-100",
2043                 .video_inputs   = 4,
2044                 /* .audio_inputs= 0, */
2045                 .tuner_type     = TUNER_ABSENT,
2046                 .tuner_addr     = ADDR_UNSET,
2047                 .svhs           = NO_SVHS,
2048                 .gpiomask       = 0xdf,
2049                 .muxsel         = MUXSEL(2, 3, 1, 0),
2050                 .pll            = PLL_28,
2051         },
2052         [BTTV_BOARD_IVC120] = {
2053                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2054                 .name           = "IVC-120G",
2055                 .video_inputs   = 16,
2056                 /* .audio_inputs= 0, */
2057                 .tuner_type     = TUNER_ABSENT,
2058                 .tuner_addr     = ADDR_UNSET,
2059                 .svhs           = NO_SVHS,   /* card has no svhs */
2060                 .no_msp34xx     = 1,
2061                 .no_tda7432     = 1,
2062                 .gpiomask       = 0x00,
2063                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2064                 .muxsel_hook    = ivc120_muxsel,
2065                 .pll            = PLL_28,
2066         },
2067
2068                 /* ---- card 0x70 ---------------------------------- */
2069         [BTTV_BOARD_PC_HDTV] = {
2070                 .name           = "pcHDTV HD-2000 TV",
2071                 .video_inputs   = 4,
2072                 /* .audio_inputs= 1, */
2073                 .svhs           = 2,
2074                 .muxsel         = MUXSEL(2, 3, 1, 0),
2075                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2076                 .tuner_addr     = ADDR_UNSET,
2077                 .has_dvb        = 1,
2078         },
2079         [BTTV_BOARD_TWINHAN_DST] = {
2080                 .name           = "Twinhan DST + clones",
2081                 .no_msp34xx     = 1,
2082                 .no_tda7432     = 1,
2083                 .tuner_type     = TUNER_ABSENT,
2084                 .tuner_addr     = ADDR_UNSET,
2085                 .no_video       = 1,
2086                 .has_dvb        = 1,
2087         },
2088         [BTTV_BOARD_WINFASTVC100] = {
2089                 .name           = "Winfast VC100",
2090                 .video_inputs   = 3,
2091                 /* .audio_inputs= 0, */
2092                 .svhs           = 1,
2093                 /* Vid In, SVid In, Vid over SVid in connector */
2094                 .muxsel         = MUXSEL(3, 1, 1, 3),
2095                 .no_msp34xx     = 1,
2096                 .no_tda7432     = 1,
2097                 .tuner_type     = TUNER_ABSENT,
2098                 .tuner_addr     = ADDR_UNSET,
2099                 .pll            = PLL_28,
2100         },
2101         [BTTV_BOARD_TEV560] = {
2102                 .name           = "Teppro TEV-560/InterVision IV-560",
2103                 .video_inputs   = 3,
2104                 /* .audio_inputs= 1, */
2105                 .svhs           = 2,
2106                 .gpiomask       = 3,
2107                 .muxsel         = MUXSEL(2, 3, 1, 1),
2108                 .gpiomux        = { 1, 1, 1, 1 },
2109                 .tuner_type     = TUNER_PHILIPS_PAL,
2110                 .tuner_addr     = ADDR_UNSET,
2111                 .pll            = PLL_35,
2112         },
2113
2114                 /* ---- card 0x74 ---------------------------------- */
2115         [BTTV_BOARD_SIMUS_GVC1100] = {
2116                 .name           = "SIMUS GVC1100",
2117                 .video_inputs   = 4,
2118                 /* .audio_inputs= 0, */
2119                 .svhs           = NO_SVHS,
2120                 .tuner_type     = TUNER_ABSENT,
2121                 .tuner_addr     = ADDR_UNSET,
2122                 .pll            = PLL_28,
2123                 .muxsel         = MUXSEL(2, 2, 2, 2),
2124                 .gpiomask       = 0x3F,
2125                 .muxsel_hook    = gvc1100_muxsel,
2126         },
2127         [BTTV_BOARD_NGSTV_PLUS] = {
2128                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2129                 .name           = "NGS NGSTV+",
2130                 .video_inputs   = 3,
2131                 .svhs           = 2,
2132                 .gpiomask       = 0x008007,
2133                 .muxsel         = MUXSEL(2, 3, 0, 0),
2134                 .gpiomux        = { 0, 0, 0, 0 },
2135                 .gpiomute       = 0x000003,
2136                 .pll            = PLL_28,
2137                 .tuner_type     = TUNER_PHILIPS_PAL,
2138                 .tuner_addr     = ADDR_UNSET,
2139                 .has_remote     = 1,
2140         },
2141         [BTTV_BOARD_LMLBT4] = {
2142                 /* http://linuxmedialabs.com */
2143                 .name           = "LMLBT4",
2144                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2145                 /* .audio_inputs= 0, */
2146                 .svhs           = NO_SVHS,
2147                 .muxsel         = MUXSEL(2, 3, 1, 0),
2148                 .no_msp34xx     = 1,
2149                 .no_tda7432     = 1,
2150                 .tuner_type     = TUNER_ABSENT,
2151                 .tuner_addr     = ADDR_UNSET,
2152         },
2153         [BTTV_BOARD_TEKRAM_M205] = {
2154                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2155                 .name           = "Tekram M205 PRO",
2156                 .video_inputs   = 3,
2157                 /* .audio_inputs= 1, */
2158                 .tuner_type     = TUNER_PHILIPS_PAL,
2159                 .tuner_addr     = ADDR_UNSET,
2160                 .svhs           = 2,
2161                 .gpiomask       = 0x68,
2162                 .muxsel         = MUXSEL(2, 3, 1),
2163                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2164                 .pll            = PLL_28,
2165         },
2166
2167                 /* ---- card 0x78 ---------------------------------- */
2168         [BTTV_BOARD_CONTVFMI] = {
2169                 /* Javier Cendan Ares <jcendan@lycos.es> */
2170                 /* bt878 TV + FM without subsystem ID */
2171                 .name           = "Conceptronic CONTVFMi",
2172                 .video_inputs   = 3,
2173                 /* .audio_inputs= 1, */
2174                 .svhs           = 2,
2175                 .gpiomask       = 0x008007,
2176                 .muxsel         = MUXSEL(2, 3, 1, 1),
2177                 .gpiomux        = { 0, 1, 2, 2 },
2178                 .gpiomute       = 3,
2179                 .pll            = PLL_28,
2180                 .tuner_type     = TUNER_PHILIPS_PAL,
2181                 .tuner_addr     = ADDR_UNSET,
2182                 .has_remote     = 1,
2183                 .has_radio      = 1,
2184         },
2185         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2186                 /*Eric DEBIEF <debief@telemsa.com>*/
2187                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2188                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2189                 /*0x79 in bttv.h*/
2190                 .name           = "Euresys Picolo Tetra",
2191                 .video_inputs   = 4,
2192                 /* .audio_inputs= 0, */
2193                 .svhs           = NO_SVHS,
2194                 .gpiomask       = 0,
2195                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2196                 .no_msp34xx     = 1,
2197                 .no_tda7432     = 1,
2198                 /*878A input is always MUX0, see above.*/
2199                 .muxsel         = MUXSEL(2, 2, 2, 2),
2200                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2201                 .pll            = PLL_28,
2202                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2203                 .tuner_type     = TUNER_ABSENT,
2204                 .tuner_addr     = ADDR_UNSET,
2205         },
2206         [BTTV_BOARD_SPIRIT_TV] = {
2207                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2208                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2209                 .name           = "Spirit TV Tuner",
2210                 .video_inputs   = 3,
2211                 /* .audio_inputs= 1, */
2212                 .svhs           = 2,
2213                 .gpiomask       = 0x0000000f,
2214                 .muxsel         = MUXSEL(2, 1, 1),
2215                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2216                 .tuner_type     = TUNER_TEMIC_PAL,
2217                 .tuner_addr     = ADDR_UNSET,
2218                 .no_msp34xx     = 1,
2219         },
2220         [BTTV_BOARD_AVDVBT_771] = {
2221                 /* Wolfram Joost <wojo@frokaschwei.de> */
2222                 .name           = "AVerMedia AVerTV DVB-T 771",
2223                 .video_inputs   = 2,
2224                 .svhs           = 1,
2225                 .tuner_type     = TUNER_ABSENT,
2226                 .tuner_addr     = ADDR_UNSET,
2227                 .muxsel         = MUXSEL(3, 3),
2228                 .no_msp34xx     = 1,
2229                 .no_tda7432     = 1,
2230                 .pll            = PLL_28,
2231                 .has_dvb        = 1,
2232                 .no_gpioirq     = 1,
2233                 .has_remote     = 1,
2234         },
2235                 /* ---- card 0x7c ---------------------------------- */
2236         [BTTV_BOARD_AVDVBT_761] = {
2237                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2238                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2239                 .name           = "AverMedia AverTV DVB-T 761",
2240                 .video_inputs   = 2,
2241                 .svhs           = 1,
2242                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2243                 .no_msp34xx     = 1,
2244                 .no_tda7432     = 1,
2245                 .pll            = PLL_28,
2246                 .tuner_type     = TUNER_ABSENT,
2247                 .tuner_addr     = ADDR_UNSET,
2248                 .has_dvb        = 1,
2249                 .no_gpioirq     = 1,
2250                 .has_remote     = 1,
2251         },
2252         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2253                 /* andre.schwarz@matrix-vision.de */
2254                 .name           = "MATRIX Vision Sigma-SQ",
2255                 .video_inputs   = 16,
2256                 /* .audio_inputs= 0, */
2257                 .svhs           = NO_SVHS,
2258                 .gpiomask       = 0x0,
2259                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2260                 .muxsel_hook    = sigmaSQ_muxsel,
2261                 .gpiomux        = { 0 },
2262                 .no_msp34xx     = 1,
2263                 .pll            = PLL_28,
2264                 .tuner_type     = TUNER_ABSENT,
2265                 .tuner_addr     = ADDR_UNSET,
2266         },
2267         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2268                 /* andre.schwarz@matrix-vision.de */
2269                 .name           = "MATRIX Vision Sigma-SLC",
2270                 .video_inputs   = 4,
2271                 /* .audio_inputs= 0, */
2272                 .svhs           = NO_SVHS,
2273                 .gpiomask       = 0x0,
2274                 .muxsel         = MUXSEL(2, 2, 2, 2),
2275                 .muxsel_hook    = sigmaSLC_muxsel,
2276                 .gpiomux        = { 0 },
2277                 .no_msp34xx     = 1,
2278                 .pll            = PLL_28,
2279                 .tuner_type     = TUNER_ABSENT,
2280                 .tuner_addr     = ADDR_UNSET,
2281         },
2282                 /* BTTV_BOARD_APAC_VIEWCOMP */
2283         [BTTV_BOARD_APAC_VIEWCOMP] = {
2284                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2285                 /* bt878 TV + FM 0x00000000 subsystem ID */
2286                 .name           = "APAC Viewcomp 878(AMAX)",
2287                 .video_inputs   = 2,
2288                 /* .audio_inputs= 1, */
2289                 .svhs           = NO_SVHS,
2290                 .gpiomask       = 0xFF,
2291                 .muxsel         = MUXSEL(2, 3, 1, 1),
2292                 .gpiomux        = { 2, 0, 0, 0 },
2293                 .gpiomute       = 10,
2294                 .pll            = PLL_28,
2295                 .tuner_type     = TUNER_PHILIPS_PAL,
2296                 .tuner_addr     = ADDR_UNSET,
2297                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2298                 .has_radio      = 1,   /* not every card has radio */
2299         },
2300
2301                 /* ---- card 0x80 ---------------------------------- */
2302         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2303                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2304                 .name           = "DViCO FusionHDTV DVB-T Lite",
2305                 .no_msp34xx     = 1,
2306                 .no_tda7432     = 1,
2307                 .pll            = PLL_28,
2308                 .no_video       = 1,
2309                 .has_dvb        = 1,
2310                 .tuner_type     = TUNER_ABSENT,
2311                 .tuner_addr     = ADDR_UNSET,
2312         },
2313         [BTTV_BOARD_VGEAR_MYVCD] = {
2314                 /* Steven <photon38@pchome.com.tw> */
2315                 .name           = "V-Gear MyVCD",
2316                 .video_inputs   = 3,
2317                 /* .audio_inputs= 1, */
2318                 .svhs           = 2,
2319                 .gpiomask       = 0x3f,
2320                 .muxsel         = MUXSEL(2, 3, 1, 0),
2321                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2322                 .gpiomute       = 0x31,
2323                 .no_msp34xx     = 1,
2324                 .pll            = PLL_28,
2325                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2326                 .tuner_addr     = ADDR_UNSET,
2327                 .has_radio      = 0,
2328         },
2329         [BTTV_BOARD_SUPER_TV] = {
2330                 /* Rick C <cryptdragoon@gmail.com> */
2331                 .name           = "Super TV Tuner",
2332                 .video_inputs   = 4,
2333                 /* .audio_inputs= 1, */
2334                 .svhs           = 2,
2335                 .muxsel         = MUXSEL(2, 3, 1, 0),
2336                 .tuner_type     = TUNER_PHILIPS_NTSC,
2337                 .tuner_addr     = ADDR_UNSET,
2338                 .gpiomask       = 0x008007,
2339                 .gpiomux        = { 0, 0x000001,0,0 },
2340                 .has_radio      = 1,
2341         },
2342         [BTTV_BOARD_TIBET_CS16] = {
2343                 /* Chris Fanning <video4linux@haydon.net> */
2344                 .name           = "Tibet Systems 'Progress DVR' CS16",
2345                 .video_inputs   = 16,
2346                 /* .audio_inputs= 0, */
2347                 .svhs           = NO_SVHS,
2348                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2349                 .pll            = PLL_28,
2350                 .no_msp34xx     = 1,
2351                 .no_tda7432     = 1,
2352                 .tuner_type     = TUNER_ABSENT,
2353                 .tuner_addr     = ADDR_UNSET,
2354                 .muxsel_hook    = tibetCS16_muxsel,
2355         },
2356         [BTTV_BOARD_KODICOM_4400R] = {
2357                 /* Bill Brack <wbrack@mmm.com.hk> */
2358                 /*
2359                 * Note that, because of the card's wiring, the "master"
2360                 * BT878A chip (i.e. the one which controls the analog switch
2361                 * and must use this card type) is the 2nd one detected.  The
2362                 * other 3 chips should use card type 0x85, whose description
2363                 * follows this one.  There is a EEPROM on the card (which is
2364                 * connected to the I2C of one of those other chips), but is
2365                 * not currently handled.  There is also a facility for a
2366                 * "monitor", which is also not currently implemented.
2367                 */
2368                 .name           = "Kodicom 4400R (master)",
2369                 .video_inputs   = 16,
2370                 /* .audio_inputs= 0, */
2371                 .tuner_type     = TUNER_ABSENT,
2372                 .tuner_addr     = ADDR_UNSET,
2373                 .svhs           = NO_SVHS,
2374                 /* GPIO bits 0-9 used for analog switch:
2375                 *   00 - 03:    camera selector
2376                 *   04 - 06:    channel (controller) selector
2377                 *   07: data (1->on, 0->off)
2378                 *   08: strobe
2379                 *   09: reset
2380                 * bit 16 is input from sync separator for the channel
2381                 */
2382                 .gpiomask       = 0x0003ff,
2383                 .no_gpioirq     = 1,
2384                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2385                 .pll            = PLL_28,
2386                 .no_msp34xx     = 1,
2387                 .no_tda7432     = 1,
2388                 .muxsel_hook    = kodicom4400r_muxsel,
2389         },
2390         [BTTV_BOARD_KODICOM_4400R_SL] = {
2391                 /* Bill Brack <wbrack@mmm.com.hk> */
2392                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2393                 * one which controls the analog switch, and must use the card type)
2394                 * is the 2nd one detected.  The other 3 chips should use this card
2395                 * type
2396                 */
2397                 .name           = "Kodicom 4400R (slave)",
2398                 .video_inputs   = 16,
2399                 /* .audio_inputs= 0, */
2400                 .tuner_type     = TUNER_ABSENT,
2401                 .tuner_addr     = ADDR_UNSET,
2402                 .svhs           = NO_SVHS,
2403                 .gpiomask       = 0x010000,
2404                 .no_gpioirq     = 1,
2405                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2406                 .pll            = PLL_28,
2407                 .no_msp34xx     = 1,
2408                 .no_tda7432     = 1,
2409                 .muxsel_hook    = kodicom4400r_muxsel,
2410         },
2411                 /* ---- card 0x86---------------------------------- */
2412         [BTTV_BOARD_ADLINK_RTV24] = {
2413                 /* Michael Henson <mhenson@clarityvi.com> */
2414                 /* Adlink RTV24 with special unlock codes */
2415                 .name           = "Adlink RTV24",
2416                 .video_inputs   = 4,
2417                 /* .audio_inputs= 1, */
2418                 .svhs           = 2,
2419                 .muxsel         = MUXSEL(2, 3, 1, 0),
2420                 .tuner_type     = UNSET,
2421                 .tuner_addr     = ADDR_UNSET,
2422                 .pll            = PLL_28,
2423         },
2424                 /* ---- card 0x87---------------------------------- */
2425         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2426                 /* Michael Krufky <mkrufky@linuxtv.org> */
2427                 .name           = "DViCO FusionHDTV 5 Lite",
2428                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2429                 .tuner_addr     = ADDR_UNSET,
2430                 .video_inputs   = 3,
2431                 /* .audio_inputs= 1, */
2432                 .svhs           = 2,
2433                 .muxsel         = MUXSEL(2, 3, 1),
2434                 .gpiomask       = 0x00e00007,
2435                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2436                 .gpiomute       = 0x00c00007,
2437                 .no_msp34xx     = 1,
2438                 .no_tda7432     = 1,
2439                 .has_dvb        = 1,
2440         },
2441                 /* ---- card 0x88---------------------------------- */
2442         [BTTV_BOARD_ACORP_Y878F] = {
2443                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2444                 .name           = "Acorp Y878F",
2445                 .video_inputs   = 3,
2446                 /* .audio_inputs= 1, */
2447                 .svhs           = 2,
2448                 .gpiomask       = 0x01fe00,
2449                 .muxsel         = MUXSEL(2, 3, 1, 1),
2450                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2451                 .gpiomute       = 0x002000,
2452                 .pll            = PLL_28,
2453                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2454                 .tuner_addr     = 0xc1 >>1,
2455                 .has_radio      = 1,
2456         },
2457                 /* ---- card 0x89 ---------------------------------- */
2458         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2459                 .name           = "Conceptronic CTVFMi v2",
2460                 .video_inputs   = 3,
2461                 /* .audio_inputs= 1, */
2462                 .svhs           = 2,
2463                 .gpiomask       = 0x001c0007,
2464                 .muxsel         = MUXSEL(2, 3, 1, 1),
2465                 .gpiomux        = { 0, 1, 2, 2 },
2466                 .gpiomute       = 3,
2467                 .pll            = PLL_28,
2468                 .tuner_type     = TUNER_TENA_9533_DI,
2469                 .tuner_addr     = ADDR_UNSET,
2470                 .has_remote     = 1,
2471                 .has_radio      = 1,
2472         },
2473                 /* ---- card 0x8a ---------------------------------- */
2474         [BTTV_BOARD_PV_BT878P_2E] = {
2475                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2476                 .video_inputs   = 5,
2477                 /* .audio_inputs= 1, */
2478                 .svhs           = 3,
2479                 .has_dig_in     = 1,
2480                 .gpiomask       = 0x01fe00,
2481                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2482                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2483                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2484                 .gpiomute       = 0x12400,
2485                 .no_msp34xx     = 1,
2486                 .pll            = PLL_28,
2487                 .tuner_type     = TUNER_LG_PAL_FM,
2488                 .tuner_addr     = ADDR_UNSET,
2489                 .has_remote     = 1,
2490         },
2491                 /* ---- card 0x8b ---------------------------------- */
2492         [BTTV_BOARD_PV_M4900] = {
2493                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2494                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2495                 .video_inputs   = 3,
2496                 /* .audio_inputs= 1, */
2497                 .svhs           = 2,
2498                 .gpiomask       = 0x3f,
2499                 .muxsel         = MUXSEL(2, 3, 1, 1),
2500                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2501                 .gpiomute       = 0x29,
2502                 .no_msp34xx     = 1,
2503                 .pll            = PLL_28,
2504                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2505                 .tuner_addr     = ADDR_UNSET,
2506                 .has_radio      = 1,
2507                 .has_remote     = 1,
2508         },
2509                 /* ---- card 0x8c ---------------------------------- */
2510         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2511              one external BNC composite input (mux 2)
2512              three internal composite inputs (unknown muxes)
2513              an 18-bit stereo A/D (CS5331A), which has:
2514                one external stereo unblanced (RCA) audio connection
2515                one (or 3?) internal stereo balanced (XLR) audio connection
2516                input is selected via gpio to a 14052B mux
2517                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2518                gain is controlled via an X9221A chip on the I2C bus @0x28
2519                sample rate is controlled via gpio to an MK1413S
2520                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2521              There is neither a tuner nor an svideo input. */
2522         [BTTV_BOARD_OSPREY440]  = {
2523                 .name           = "Osprey 440",
2524                 .video_inputs   = 4,
2525                 /* .audio_inputs= 2, */
2526                 .svhs           = NO_SVHS,
2527                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2528                 .gpiomask       = 0x303,
2529                 .gpiomute       = 0x000, /* int + 32kHz */
2530                 .gpiomux        = { 0, 0, 0x000, 0x100},
2531                 .pll            = PLL_28,
2532                 .tuner_type     = TUNER_ABSENT,
2533                 .tuner_addr     = ADDR_UNSET,
2534                 .no_msp34xx     = 1,
2535                 .no_tda7432     = 1,
2536         },
2537                 /* ---- card 0x8d ---------------------------------- */
2538         [BTTV_BOARD_ASOUND_SKYEYE] = {
2539                 .name           = "Asound Skyeye PCTV",
2540                 .video_inputs   = 3,
2541                 /* .audio_inputs= 1, */
2542                 .svhs           = 2,
2543                 .gpiomask       = 15,
2544                 .muxsel         = MUXSEL(2, 3, 1, 1),
2545                 .gpiomux        = { 2, 0, 0, 0 },
2546                 .gpiomute       = 1,
2547                 .pll            = PLL_28,
2548                 .tuner_type     = TUNER_PHILIPS_NTSC,
2549                 .tuner_addr     = ADDR_UNSET,
2550         },
2551                 /* ---- card 0x8e ---------------------------------- */
2552         [BTTV_BOARD_SABRENT_TVFM] = {
2553                 .name           = "Sabrent TV-FM (bttv version)",
2554                 .video_inputs   = 3,
2555                 /* .audio_inputs= 1, */
2556                 .svhs           = 2,
2557                 .gpiomask       = 0x108007,
2558                 .muxsel         = MUXSEL(2, 3, 1, 1),
2559                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2560                 .no_msp34xx     = 1,
2561                 .no_tda7432     = 1,
2562                 .pll            = PLL_28,
2563                 .tuner_type     = TUNER_TNF_5335MF,
2564                 .tuner_addr     = ADDR_UNSET,
2565                 .has_radio      = 1,
2566         },
2567         /* ---- card 0x8f ---------------------------------- */
2568         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2569                 .name           = "Hauppauge ImpactVCB (bt878)",
2570                 .video_inputs   = 4,
2571                 /* .audio_inputs= 0, */
2572                 .svhs           = NO_SVHS,
2573                 .gpiomask       = 0x0f, /* old: 7 */
2574                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2575                 .no_msp34xx     = 1,
2576                 .no_tda7432     = 1,
2577                 .tuner_type     = TUNER_ABSENT,
2578                 .tuner_addr     = ADDR_UNSET,
2579         },
2580         [BTTV_BOARD_MACHTV_MAGICTV] = {
2581                 /* Julian Calaby <julian.calaby@gmail.com>
2582                  * Slightly different from original MachTV definition (0x60)
2583
2584                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2585                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2586                  * properly (methinks) causing no keyup bits being set */
2587
2588                 .name           = "MagicTV", /* rebranded MachTV */
2589                 .video_inputs   = 3,
2590                 /* .audio_inputs= 1, */
2591                 .svhs           = 2,
2592                 .gpiomask       = 7,
2593                 .muxsel         = MUXSEL(2, 3, 1, 1),
2594                 .gpiomux        = { 0, 1, 2, 3 },
2595                 .gpiomute       = 4,
2596                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2597                 .tuner_addr     = ADDR_UNSET,
2598                 .pll            = PLL_28,
2599                 .has_radio      = 1,
2600                 .has_remote     = 1,
2601         },
2602         [BTTV_BOARD_SSAI_SECURITY] = {
2603                 .name           = "SSAI Security Video Interface",
2604                 .video_inputs   = 4,
2605                 /* .audio_inputs= 0, */
2606                 .svhs           = NO_SVHS,
2607                 .muxsel         = MUXSEL(0, 1, 2, 3),
2608                 .tuner_type     = TUNER_ABSENT,
2609                 .tuner_addr     = ADDR_UNSET,
2610         },
2611         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2612                 .name           = "SSAI Ultrasound Video Interface",
2613                 .video_inputs   = 2,
2614                 /* .audio_inputs= 0, */
2615                 .svhs           = 1,
2616                 .muxsel         = MUXSEL(2, 0, 1, 3),
2617                 .tuner_type     = TUNER_ABSENT,
2618                 .tuner_addr     = ADDR_UNSET,
2619         },
2620         /* ---- card 0x94---------------------------------- */
2621         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2622                 .name           = "DViCO FusionHDTV 2",
2623                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2624                 .tuner_addr     = ADDR_UNSET,
2625                 .video_inputs   = 3,
2626                 /* .audio_inputs= 1, */
2627                 .svhs           = 2,
2628                 .muxsel         = MUXSEL(2, 3, 1),
2629                 .gpiomask       = 0x00e00007,
2630                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2631                 .gpiomute       = 0x00c00007,
2632                 .no_msp34xx     = 1,
2633                 .no_tda7432     = 1,
2634         },
2635         /* ---- card 0x95---------------------------------- */
2636         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2637                 .name           = "Typhoon TV-Tuner PCI (50684)",
2638                 .video_inputs   = 3,
2639                 /* .audio_inputs= 1, */
2640                 .svhs           = 2,
2641                 .gpiomask       = 0x3014f,
2642                 .muxsel         = MUXSEL(2, 3, 1, 1),
2643                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2644                 .gpiomute       = 10,
2645                 .pll            = PLL_28,
2646                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2647                 .tuner_addr     = ADDR_UNSET,
2648         },
2649         [BTTV_BOARD_GEOVISION_GV600] = {
2650                 /* emhn@usb.ve */
2651                 .name           = "Geovision GV-600",
2652                 .video_inputs   = 16,
2653                 /* .audio_inputs= 0, */
2654                 .svhs           = NO_SVHS,
2655                 .gpiomask       = 0x0,
2656                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2657                 .muxsel_hook    = geovision_muxsel,
2658                 .gpiomux        = { 0 },
2659                 .no_msp34xx     = 1,
2660                 .pll            = PLL_28,
2661                 .tuner_type     = TUNER_ABSENT,
2662                 .tuner_addr     = ADDR_UNSET,
2663         },
2664         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2665                 /* Mauro Lacy <mauro@lacy.com.ar>
2666                  * Based on MagicTV and Conceptronic CONTVFMi */
2667
2668                 .name           = "Kozumi KTV-01C",
2669                 .video_inputs   = 3,
2670                 /* .audio_inputs= 1, */
2671                 .svhs           = 2,
2672                 .gpiomask       = 0x008007,
2673                 .muxsel         = MUXSEL(2, 3, 1, 1),
2674                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2675                 .gpiomute       = 3, /* CONTVFMi */
2676                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2677                 .tuner_addr     = ADDR_UNSET,
2678                 .pll            = PLL_28,
2679                 .has_radio      = 1,
2680                 .has_remote     = 1,
2681         },
2682         [BTTV_BOARD_ENLTV_FM_2] = {
2683                 /* Encore TV Tuner Pro ENL TV-FM-2
2684                    Mauro Carvalho Chehab <mchehab@infradead.org */
2685                 .name           = "Encore ENL TV-FM-2",
2686                 .video_inputs   = 3,
2687                 /* .audio_inputs= 1, */
2688                 .svhs           = 2,
2689                 /* bit 6          -> IR disabled
2690                    bit 18/17 = 00 -> mute
2691                                01 -> enable external audio input
2692                                10 -> internal audio input (mono?)
2693                                11 -> internal audio input
2694                  */
2695                 .gpiomask       = 0x060040,
2696                 .muxsel         = MUXSEL(2, 3, 3),
2697                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2698                 .gpiomute       = 0,
2699                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2700                 .tuner_addr     = ADDR_UNSET,
2701                 .pll            = PLL_28,
2702                 .has_radio      = 1,
2703                 .has_remote     = 1,
2704         },
2705         [BTTV_BOARD_VD012] = {
2706                 /* D.Heer@Phytec.de */
2707                 .name           = "PHYTEC VD-012 (bt878)",
2708                 .video_inputs   = 4,
2709                 /* .audio_inputs= 0, */
2710                 .svhs           = NO_SVHS,
2711                 .gpiomask       = 0x00,
2712                 .muxsel         = MUXSEL(0, 2, 3, 1),
2713                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2714                 .pll            = PLL_28,
2715                 .tuner_type     = TUNER_ABSENT,
2716                 .tuner_addr     = ADDR_UNSET,
2717         },
2718         [BTTV_BOARD_VD012_X1] = {
2719                 /* D.Heer@Phytec.de */
2720                 .name           = "PHYTEC VD-012-X1 (bt878)",
2721                 .video_inputs   = 4,
2722                 /* .audio_inputs= 0, */
2723                 .svhs           = 3,
2724                 .gpiomask       = 0x00,
2725                 .muxsel         = MUXSEL(2, 3, 1),
2726                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2727                 .pll            = PLL_28,
2728                 .tuner_type     = TUNER_ABSENT,
2729                 .tuner_addr     = ADDR_UNSET,
2730         },
2731         [BTTV_BOARD_VD012_X2] = {
2732                 /* D.Heer@Phytec.de */
2733                 .name           = "PHYTEC VD-012-X2 (bt878)",
2734                 .video_inputs   = 4,
2735                 /* .audio_inputs= 0, */
2736                 .svhs           = 3,
2737                 .gpiomask       = 0x00,
2738                 .muxsel         = MUXSEL(3, 2, 1),
2739                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2740                 .pll            = PLL_28,
2741                 .tuner_type     = TUNER_ABSENT,
2742                 .tuner_addr     = ADDR_UNSET,
2743         },
2744         [BTTV_BOARD_GEOVISION_GV800S] = {
2745                 /* Bruno Christo <bchristo@inf.ufsm.br>
2746                  *
2747                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2748                  *      1 audio input  per BT878A = 4 audio inputs
2749                  *      4 video inputs per BT878A = 16 video inputs
2750                  * This is the first BT878A chip of the GV-800(S). It's the
2751                  * "master" chip and it controls the video inputs through an
2752                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2753                  * slaves should use card type 0x9e (following this one).
2754                  * There is a EEPROM on the card which is currently not handled.
2755                  * The audio input is not working yet.
2756                  */
2757                 .name           = "Geovision GV-800(S) (master)",
2758                 .video_inputs   = 4,
2759                 /* .audio_inputs= 1, */
2760                 .tuner_type     = TUNER_ABSENT,
2761                 .tuner_addr     = ADDR_UNSET,
2762                 .svhs           = NO_SVHS,
2763                 .gpiomask       = 0xf107f,
2764                 .no_gpioirq     = 1,
2765                 .muxsel         = MUXSEL(2, 2, 2, 2),
2766                 .pll            = PLL_28,
2767                 .no_msp34xx     = 1,
2768                 .no_tda7432     = 1,
2769                 .muxsel_hook    = gv800s_muxsel,
2770         },
2771         [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2772                 /* Bruno Christo <bchristo@inf.ufsm.br>
2773                  *
2774                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2775                  *      1 audio input  per BT878A = 4 audio inputs
2776                  *      4 video inputs per BT878A = 16 video inputs
2777                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2778                  * and should use this card type.
2779                  * The audio input is not working yet.
2780                  */
2781                 .name           = "Geovision GV-800(S) (slave)",
2782                 .video_inputs   = 4,
2783                 /* .audio_inputs= 1, */
2784                 .tuner_type     = TUNER_ABSENT,
2785                 .tuner_addr     = ADDR_UNSET,
2786                 .svhs           = NO_SVHS,
2787                 .gpiomask       = 0x00,
2788                 .no_gpioirq     = 1,
2789                 .muxsel         = MUXSEL(2, 2, 2, 2),
2790                 .pll            = PLL_28,
2791                 .no_msp34xx     = 1,
2792                 .no_tda7432     = 1,
2793                 .muxsel_hook    = gv800s_muxsel,
2794         },
2795         [BTTV_BOARD_PV183] = {
2796                 .name           = "ProVideo PV183", /* 0x9f */
2797                 .video_inputs   = 2,
2798                 /* .audio_inputs= 0, */
2799                 .svhs           = NO_SVHS,
2800                 .gpiomask       = 0,
2801                 .muxsel         = MUXSEL(2, 3),
2802                 .gpiomux        = { 0 },
2803                 .no_msp34xx     = 1,
2804                 .pll            = PLL_28,
2805                 .tuner_type     = TUNER_ABSENT,
2806                 .tuner_addr     = ADDR_UNSET,
2807         },
2808         /* ---- card 0xa0---------------------------------- */
2809         [BTTV_BOARD_TVT_TD3116] = {
2810                 .name           = "Tongwei Video Technology TD-3116",
2811                 .video_inputs   = 16,
2812                 .gpiomask       = 0xc00ff,
2813                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2814                 .muxsel_hook    = td3116_muxsel,
2815                 .svhs           = NO_SVHS,
2816                 .pll            = PLL_28,
2817                 .tuner_type     = TUNER_ABSENT,
2818         },
2819         [BTTV_BOARD_APOSONIC_WDVR] = {
2820                 .name           = "Aposonic W-DVR",
2821                 .video_inputs   = 4,
2822                 .svhs           = NO_SVHS,
2823                 .muxsel         = MUXSEL(2, 3, 1, 0),
2824                 .tuner_type     = TUNER_ABSENT,
2825         },
2826         [BTTV_BOARD_ADLINK_MPG24] = {
2827                 /* Adlink MPG24 */
2828                 .name           = "Adlink MPG24",
2829                 .video_inputs   = 1,
2830                 /* .audio_inputs= 1, */
2831                 .svhs           = NO_SVHS,
2832                 .muxsel         = MUXSEL(2, 2, 2, 2),
2833                 .tuner_type     = UNSET,
2834                 .tuner_addr     = ADDR_UNSET,
2835                 .pll            = PLL_28,
2836         },
2837         [BTTV_BOARD_BT848_CAP_14] = {
2838                 .name           = "Bt848 Capture 14MHz",
2839                 .video_inputs   = 4,
2840                 .svhs           = 2,
2841                 .muxsel         = MUXSEL(2, 3, 1, 0),
2842                 .pll            = PLL_14,
2843                 .tuner_type     = TUNER_ABSENT,
2844         },
2845         [BTTV_BOARD_CYBERVISION_CV06] = {
2846                 .name           = "CyberVision CV06 (SV)",
2847                 .video_inputs   = 4,
2848                 /* .audio_inputs= 0, */
2849                 .svhs           = NO_SVHS,
2850                 .muxsel         = MUXSEL(2, 3, 1, 0),
2851                 .pll            = PLL_28,
2852                 .tuner_type     = TUNER_ABSENT,
2853                 .tuner_addr     = ADDR_UNSET,
2854         },
2855         [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2856                 /* Pojar George <geoubuntu@gmail.com> */
2857                 .name           = "Kworld V-Stream Xpert TV PVR878",
2858                 .video_inputs   = 3,
2859                 /* .audio_inputs= 1, */
2860                 .svhs           = 2,
2861                 .gpiomask       = 0x001c0007,
2862                 .muxsel         = MUXSEL(2, 3, 1, 1),
2863                 .gpiomux        = { 0, 1, 2, 2 },
2864                 .gpiomute       = 3,
2865                 .pll            = PLL_28,
2866                 .tuner_type     = TUNER_TENA_9533_DI,
2867                 .tuner_addr    = ADDR_UNSET,
2868                 .has_remote     = 1,
2869                 .has_radio      = 1,
2870         },
2871         /* ---- card 0xa6---------------------------------- */
2872         [BTTV_BOARD_PCI_8604PW] = {
2873                 /* PCI-8604PW with special unlock sequence */
2874                 .name           = "PCI-8604PW",
2875                 .video_inputs   = 2,
2876                 /* .audio_inputs= 0, */
2877                 .svhs           = NO_SVHS,
2878                 /* The second input is available on CN4, if populated.
2879                  * The other 5x2 header (CN2?) connects to the same inputs
2880                  * as the on-board BNCs */
2881                 .muxsel         = MUXSEL(2, 3),
2882                 .tuner_type     = TUNER_ABSENT,
2883                 .no_msp34xx     = 1,
2884                 .no_tda7432     = 1,
2885                 .pll            = PLL_35,
2886         },
2887 };
2888
2889 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2890
2891 /* ----------------------------------------------------------------------- */
2892
2893 static unsigned char eeprom_data[256];
2894
2895 /*
2896  * identify card
2897  */
2898 void bttv_idcard(struct bttv *btv)
2899 {
2900         unsigned int gpiobits;
2901         int i,type;
2902
2903         /* read PCI subsystem ID */
2904         btv->cardid  = btv->c.pci->subsystem_device << 16;
2905         btv->cardid |= btv->c.pci->subsystem_vendor;
2906
2907         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2908                 /* look for the card */
2909                 for (type = -1, i = 0; cards[i].id != 0; i++)
2910                         if (cards[i].id  == btv->cardid)
2911                                 type = i;
2912
2913                 if (type != -1) {
2914                         /* found it */
2915                         pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2916                                 btv->c.nr, cards[type].name, cards[type].cardnr,
2917                                 btv->cardid & 0xffff,
2918                                 (btv->cardid >> 16) & 0xffff);
2919                         btv->c.type = cards[type].cardnr;
2920                 } else {
2921                         /* 404 */
2922                         pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2923                                 btv->c.nr, btv->cardid & 0xffff,
2924                                 (btv->cardid >> 16) & 0xffff);
2925                         pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2926                 }
2927         }
2928
2929         /* let the user override the autodetected type */
2930         if (card[btv->c.nr] < bttv_num_tvcards)
2931                 btv->c.type=card[btv->c.nr];
2932
2933         /* print which card config we are using */
2934         pr_info("%d: using: %s [card=%d,%s]\n",
2935                 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2936                 card[btv->c.nr] < bttv_num_tvcards
2937                 ? "insmod option" : "autodetected");
2938
2939         /* overwrite gpio stuff ?? */
2940         if (UNSET == audioall && UNSET == audiomux[0])
2941                 return;
2942
2943         if (UNSET != audiomux[0]) {
2944                 gpiobits = 0;
2945                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2946                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2947                         gpiobits |= audiomux[i];
2948                 }
2949         } else {
2950                 gpiobits = audioall;
2951                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2952                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2953                 }
2954         }
2955         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2956         pr_info("%d: gpio config override: mask=0x%x, mux=",
2957                 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2958         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2959                 pr_cont("%s0x%x",
2960                         i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2961         }
2962         pr_cont("\n");
2963 }
2964
2965 /*
2966  * (most) board specific initialisations goes here
2967  */
2968
2969 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2970 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2971 {
2972         int type = -1;
2973
2974         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2975                 type = BTTV_BOARD_MODTEC_205;
2976         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2977                 type = BTTV_BOARD_EURESYS_PICOLO;
2978         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2979                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2980
2981         if (-1 != type) {
2982                 btv->c.type = type;
2983                 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2984                         btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2985         }
2986 }
2987
2988 static void flyvideo_gpio(struct bttv *btv)
2989 {
2990         int gpio, has_remote, has_radio, is_capture_only;
2991         int is_lr90, has_tda9820_tda9821;
2992         int tuner_type = UNSET, ttype;
2993
2994         gpio_inout(0xffffff, 0);
2995         udelay(8);  /* without this we would see the 0x1800 mask */
2996         gpio = gpio_read();
2997         /* FIXME: must restore OUR_EN ??? */
2998
2999         /* all cards provide GPIO info, some have an additional eeprom
3000          * LR50: GPIO coding can be found lower right CP1 .. CP9
3001          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3002          *       GPIO14-12: n.c.
3003          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3004
3005          * lowest 3 bytes are remote control codes (no handshake needed)
3006          * xxxFFF: No remote control chip soldered
3007          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3008          * Note: Some bits are Audio_Mask !
3009          */
3010         ttype = (gpio & 0x0f0000) >> 16;
3011         switch (ttype) {
3012         case 0x0:
3013                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3014                 break;
3015         case 0x2:
3016                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3017                 break;
3018         case 0x4:
3019                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3020                 break;
3021         case 0x6:
3022                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3023                 break;
3024         case 0xC:
3025                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3026                 break;
3027         default:
3028                 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3029                 break;
3030         }
3031
3032         has_remote          =   gpio & 0x800000;
3033         has_radio           =   gpio & 0x400000;
3034         /*   unknown                   0x200000;
3035          *   unknown2                  0x100000; */
3036         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3037         has_tda9820_tda9821 = !(gpio & 0x004000);
3038         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3039         /*
3040          * gpio & 0x001000    output bit for audio routing */
3041
3042         if (is_capture_only)
3043                 tuner_type = TUNER_ABSENT; /* No tuner present */
3044
3045         pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3046                 btv->c.nr, has_radio ? "yes" : "no",
3047                 has_remote ? "yes" : "no", tuner_type, gpio);
3048         pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3049                 btv->c.nr, is_lr90 ? "yes" : "no",
3050                 has_tda9820_tda9821 ? "yes" : "no",
3051                 is_capture_only ? "yes" : "no");
3052
3053         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3054                 btv->tuner_type = tuner_type;
3055         btv->has_radio = has_radio;
3056
3057         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3058          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3059          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3060         if (has_tda9820_tda9821)
3061                 btv->audio_mode_gpio = lt9415_audio;
3062         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3063 }
3064
3065 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3066                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3067 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3068                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3069
3070 static void miro_pinnacle_gpio(struct bttv *btv)
3071 {
3072         int id,msp,gpio;
3073         char *info;
3074
3075         gpio_inout(0xffffff, 0);
3076         gpio = gpio_read();
3077         id   = ((gpio>>10) & 63) -1;
3078         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3079         if (id < 32) {
3080                 btv->tuner_type = miro_tunermap[id];
3081                 if (0 == (gpio & 0x20)) {
3082                         btv->has_radio = 1;
3083                         if (!miro_fmtuner[id]) {
3084                                 btv->has_tea575x = 1;
3085                                 btv->tea_gpio.wren = 6;
3086                                 btv->tea_gpio.most = 7;
3087                                 btv->tea_gpio.clk  = 8;
3088                                 btv->tea_gpio.data = 9;
3089                                 tea575x_init(btv);
3090                         }
3091                 } else {
3092                         btv->has_radio = 0;
3093                 }
3094                 if (-1 != msp) {
3095                         if (btv->c.type == BTTV_BOARD_MIRO)
3096                                 btv->c.type = BTTV_BOARD_MIROPRO;
3097                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3098                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3099                 }
3100                 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3101                         btv->c.nr, id+1, btv->tuner_type,
3102                         !btv->has_radio ? "no" :
3103                         (btv->has_tea575x ? "tea575x" : "fmtuner"),
3104                         (-1 == msp) ? "no" : "yes");
3105         } else {
3106                 /* new cards with microtune tuner */
3107                 id = 63 - id;
3108                 btv->has_radio = 0;
3109                 switch (id) {
3110                 case 1:
3111                         info = "PAL / mono";
3112                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3113                         break;
3114                 case 2:
3115                         info = "PAL+SECAM / stereo";
3116                         btv->has_radio = 1;
3117                         btv->tda9887_conf = TDA9887_QSS;
3118                         break;
3119                 case 3:
3120                         info = "NTSC / stereo";
3121                         btv->has_radio = 1;
3122                         btv->tda9887_conf = TDA9887_QSS;
3123                         break;
3124                 case 4:
3125                         info = "PAL+SECAM / mono";
3126                         btv->tda9887_conf = TDA9887_QSS;
3127                         break;
3128                 case 5:
3129                         info = "NTSC / mono";
3130                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3131                         break;
3132                 case 6:
3133                         info = "NTSC / stereo";
3134                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3135                         break;
3136                 case 7:
3137                         info = "PAL / stereo";
3138                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3139                         break;
3140                 default:
3141                         info = "oops: unknown card";
3142                         break;
3143                 }
3144                 if (-1 != msp)
3145                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3146                 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3147                         btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3148                 btv->tuner_type = TUNER_MT2032;
3149         }
3150 }
3151
3152 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3153 #define LM1882_SYNC_DRIVE     0x200000L
3154
3155 static void init_ids_eagle(struct bttv *btv)
3156 {
3157         gpio_inout(0xffffff,0xFFFF37);
3158         gpio_write(0x200020);
3159
3160         /* flash strobe inverter ?! */
3161         gpio_write(0x200024);
3162
3163         /* switch sync drive off */
3164         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3165
3166         /* set BT848 muxel to 2 */
3167         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3168 }
3169
3170 /* Muxsel helper for the IDS Eagle.
3171  * the eagles does not use the standard muxsel-bits but
3172  * has its own multiplexer */
3173 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3174 {
3175         gpio_bits(3, input & 3);
3176
3177         /* composite */
3178         /* set chroma ADC to sleep */
3179         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3180         /* set to composite video */
3181         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3182         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3183
3184         /* switch sync drive off */
3185         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3186 }
3187
3188 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3189 {
3190         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3191         gpio_write(masks[input%4]);
3192 }
3193
3194 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3195    alarms output
3196
3197    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3198    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3199
3200    IN - sensor inputs, INx - sensor inputs and TI XORed together
3201    O1,O2,O3 - alarm outputs (relays)
3202
3203    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3204
3205 */
3206
3207 static void init_lmlbt4x(struct bttv *btv)
3208 {
3209         pr_debug("LMLBT4x init\n");
3210         btwrite(0x000000, BT848_GPIO_REG_INP);
3211         gpio_inout(0xffffff, 0x0006C0);
3212         gpio_write(0x000000);
3213 }
3214
3215 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3216 {
3217         unsigned int inmux = input % 8;
3218         gpio_inout( 0xf, 0xf );
3219         gpio_bits( 0xf, inmux );
3220 }
3221
3222 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3223 {
3224         unsigned int inmux = input % 4;
3225         gpio_inout( 3<<9, 3<<9 );
3226         gpio_bits( 3<<9, inmux<<9 );
3227 }
3228
3229 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3230 {
3231         unsigned int inmux = input % 16;
3232         gpio_inout(0xf, 0xf);
3233         gpio_bits(0xf, inmux);
3234 }
3235
3236 /*
3237  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3238  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3239  * The muxes are controlled via a 74HC373 latch which is connected to
3240  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3241  * Q0 of the latch is connected to the Enable (~E) input of the first
3242  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3243  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3244  */
3245
3246 static void td3116_latch_value(struct bttv *btv, u32 value)
3247 {
3248         gpio_bits((1<<18) | 0xff, value);
3249         gpio_bits((1<<18) | 0xff, (1<<18) | value);
3250         udelay(1);
3251         gpio_bits((1<<18) | 0xff, value);
3252 }
3253
3254 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3255 {
3256         u32 value;
3257         u32 highbit;
3258
3259         highbit = (input & 0x8) >> 3 ;
3260
3261         /* Disable outputs and set value in the mux */
3262         value = 0x11; /* Disable outputs */
3263         value |= ((input & 0x7) << 1)  << (4 * highbit);
3264         td3116_latch_value(btv, value);
3265
3266         /* Enable the correct output */
3267         value &= ~0x11;
3268         value |= ((highbit ^ 0x1) << 4) | highbit;
3269         td3116_latch_value(btv, value);
3270 }
3271
3272 /* ----------------------------------------------------------------------- */
3273
3274 static void bttv_reset_audio(struct bttv *btv)
3275 {
3276         /*
3277          * BT878A has a audio-reset register.
3278          * 1. This register is an audio reset function but it is in
3279          *    function-0 (video capture) address space.
3280          * 2. It is enough to do this once per power-up of the card.
3281          * 3. There is a typo in the Conexant doc -- it is not at
3282          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3283          * --//Shrikumar 030609
3284          */
3285         if (btv->id != 878)
3286                 return;
3287
3288         if (bttv_debug)
3289                 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3290         btwrite((1<<7), 0x058);
3291         udelay(10);
3292         btwrite(     0, 0x058);
3293 }
3294
3295 /* initialization part one -- before registering i2c bus */
3296 void bttv_init_card1(struct bttv *btv)
3297 {
3298         switch (btv->c.type) {
3299         case BTTV_BOARD_HAUPPAUGE:
3300         case BTTV_BOARD_HAUPPAUGE878:
3301                 boot_msp34xx(btv,5);
3302                 break;
3303         case BTTV_BOARD_VOODOOTV_200:
3304         case BTTV_BOARD_VOODOOTV_FM:
3305                 boot_msp34xx(btv,20);
3306                 break;
3307         case BTTV_BOARD_AVERMEDIA98:
3308                 boot_msp34xx(btv,11);
3309                 break;
3310         case BTTV_BOARD_HAUPPAUGEPVR:
3311                 pvr_boot(btv);
3312                 break;
3313         case BTTV_BOARD_TWINHAN_DST:
3314         case BTTV_BOARD_AVDVBT_771:
3315         case BTTV_BOARD_PINNACLESAT:
3316                 btv->use_i2c_hw = 1;
3317                 break;
3318         case BTTV_BOARD_ADLINK_RTV24:
3319                 init_RTV24( btv );
3320                 break;
3321         case BTTV_BOARD_PCI_8604PW:
3322                 init_PCI8604PW(btv);
3323                 break;
3324
3325         }
3326         if (!bttv_tvcards[btv->c.type].has_dvb)
3327                 bttv_reset_audio(btv);
3328 }
3329
3330 /* initialization part two -- after registering i2c bus */
3331 void bttv_init_card2(struct bttv *btv)
3332 {
3333         btv->tuner_type = UNSET;
3334
3335         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3336                 bttv_readee(btv,eeprom_data,0xa0);
3337                 identify_by_eeprom(btv,eeprom_data);
3338         }
3339
3340         switch (btv->c.type) {
3341         case BTTV_BOARD_MIRO:
3342         case BTTV_BOARD_MIROPRO:
3343         case BTTV_BOARD_PINNACLE:
3344         case BTTV_BOARD_PINNACLEPRO:
3345                 /* miro/pinnacle */
3346                 miro_pinnacle_gpio(btv);
3347                 break;
3348         case BTTV_BOARD_FLYVIDEO_98:
3349         case BTTV_BOARD_MAXI:
3350         case BTTV_BOARD_LIFE_FLYKIT:
3351         case BTTV_BOARD_FLYVIDEO:
3352         case BTTV_BOARD_TYPHOON_TVIEW:
3353         case BTTV_BOARD_CHRONOS_VS2:
3354         case BTTV_BOARD_FLYVIDEO_98FM:
3355         case BTTV_BOARD_FLYVIDEO2000:
3356         case BTTV_BOARD_FLYVIDEO98EZ:
3357         case BTTV_BOARD_CONFERENCETV:
3358         case BTTV_BOARD_LIFETEC_9415:
3359                 flyvideo_gpio(btv);
3360                 break;
3361         case BTTV_BOARD_HAUPPAUGE:
3362         case BTTV_BOARD_HAUPPAUGE878:
3363         case BTTV_BOARD_HAUPPAUGEPVR:
3364                 /* pick up some config infos from the eeprom */
3365                 bttv_readee(btv,eeprom_data,0xa0);
3366                 hauppauge_eeprom(btv);
3367                 break;
3368         case BTTV_BOARD_AVERMEDIA98:
3369         case BTTV_BOARD_AVPHONE98:
3370                 bttv_readee(btv,eeprom_data,0xa0);
3371                 avermedia_eeprom(btv);
3372                 break;
3373         case BTTV_BOARD_PXC200:
3374                 init_PXC200(btv);
3375                 break;
3376         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3377                 picolo_tetra_init(btv);
3378                 break;
3379         case BTTV_BOARD_VHX:
3380                 btv->has_radio    = 1;
3381                 btv->has_tea575x  = 1;
3382                 btv->tea_gpio.wren = 5;
3383                 btv->tea_gpio.most = 6;
3384                 btv->tea_gpio.clk  = 3;
3385                 btv->tea_gpio.data = 4;
3386                 tea575x_init(btv);
3387                 break;
3388         case BTTV_BOARD_VOBIS_BOOSTAR:
3389         case BTTV_BOARD_TERRATV:
3390                 terratec_active_radio_upgrade(btv);
3391                 break;
3392         case BTTV_BOARD_MAGICTVIEW061:
3393                 if (btv->cardid == 0x3002144f) {
3394                         btv->has_radio=1;
3395                         pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3396                                 btv->c.nr);
3397                 }
3398                 break;
3399         case BTTV_BOARD_STB2:
3400                 if (btv->cardid == 0x3060121a) {
3401                         /* Fix up entry for 3DFX VoodooTV 100,
3402                            which is an OEM STB card variant. */
3403                         btv->has_radio=0;
3404                         btv->tuner_type=TUNER_TEMIC_NTSC;
3405                 }
3406                 break;
3407         case BTTV_BOARD_OSPREY1x0:
3408         case BTTV_BOARD_OSPREY1x0_848:
3409         case BTTV_BOARD_OSPREY101_848:
3410         case BTTV_BOARD_OSPREY1x1:
3411         case BTTV_BOARD_OSPREY1x1_SVID:
3412         case BTTV_BOARD_OSPREY2xx:
3413         case BTTV_BOARD_OSPREY2x0_SVID:
3414         case BTTV_BOARD_OSPREY2x0:
3415         case BTTV_BOARD_OSPREY440:
3416         case BTTV_BOARD_OSPREY500:
3417         case BTTV_BOARD_OSPREY540:
3418         case BTTV_BOARD_OSPREY2000:
3419                 bttv_readee(btv,eeprom_data,0xa0);
3420                 osprey_eeprom(btv, eeprom_data);
3421                 break;
3422         case BTTV_BOARD_IDS_EAGLE:
3423                 init_ids_eagle(btv);
3424                 break;
3425         case BTTV_BOARD_MODTEC_205:
3426                 bttv_readee(btv,eeprom_data,0xa0);
3427                 modtec_eeprom(btv);
3428                 break;
3429         case BTTV_BOARD_LMLBT4:
3430                 init_lmlbt4x(btv);
3431                 break;
3432         case BTTV_BOARD_TIBET_CS16:
3433                 tibetCS16_init(btv);
3434                 break;
3435         case BTTV_BOARD_KODICOM_4400R:
3436                 kodicom4400r_init(btv);
3437                 break;
3438         case BTTV_BOARD_GEOVISION_GV800S:
3439                 gv800s_init(btv);
3440                 break;
3441         }
3442
3443         /* pll configuration */
3444         if (!(btv->id==848 && btv->revision==0x11)) {
3445                 /* defaults from card list */
3446                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3447                         btv->pll.pll_ifreq=28636363;
3448                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3449                 }
3450                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3451                         btv->pll.pll_ifreq=35468950;
3452                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3453                 }
3454                 if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3455                         btv->pll.pll_ifreq = 14318181;
3456                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3457                 }
3458                 /* insmod options can override */
3459                 switch (pll[btv->c.nr]) {
3460                 case 0: /* none */
3461                         btv->pll.pll_crystal = 0;
3462                         btv->pll.pll_ifreq   = 0;
3463                         btv->pll.pll_ofreq   = 0;
3464                         break;
3465                 case 1: /* 28 MHz */
3466                 case 28:
3467                         btv->pll.pll_ifreq   = 28636363;
3468                         btv->pll.pll_ofreq   = 0;
3469                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3470                         break;
3471                 case 2: /* 35 MHz */
3472                 case 35:
3473                         btv->pll.pll_ifreq   = 35468950;
3474                         btv->pll.pll_ofreq   = 0;
3475                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3476                         break;
3477                 case 3: /* 14 MHz */
3478                 case 14:
3479                         btv->pll.pll_ifreq   = 14318181;
3480                         btv->pll.pll_ofreq   = 0;
3481                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3482                         break;
3483                 }
3484         }
3485         btv->pll.pll_current = -1;
3486
3487         /* tuner configuration (from card list / autodetect / insmod option) */
3488         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3489                 if (UNSET == btv->tuner_type)
3490                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3491         if (UNSET != tuner[btv->c.nr])
3492                 btv->tuner_type = tuner[btv->c.nr];
3493
3494         if (btv->tuner_type == TUNER_ABSENT)
3495                 pr_info("%d: tuner absent\n", btv->c.nr);
3496         else if (btv->tuner_type == UNSET)
3497                 pr_warn("%d: tuner type unset\n", btv->c.nr);
3498         else
3499                 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3500
3501         if (autoload != UNSET) {
3502                 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3503                 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3504                         btv->c.nr);
3505         }
3506
3507         if (UNSET == btv->tuner_type)
3508                 btv->tuner_type = TUNER_ABSENT;
3509
3510         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3511                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3512         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3513                     UNSET : bttv_tvcards[btv->c.type].svhs;
3514         if (svhs[btv->c.nr] != UNSET)
3515                 btv->svhs = svhs[btv->c.nr];
3516         if (remote[btv->c.nr] != UNSET)
3517                 btv->has_remote = remote[btv->c.nr];
3518
3519         if (bttv_tvcards[btv->c.type].has_radio)
3520                 btv->has_radio = 1;
3521         if (bttv_tvcards[btv->c.type].has_remote)
3522                 btv->has_remote = 1;
3523         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3524                 btv->gpioirq = 1;
3525         if (bttv_tvcards[btv->c.type].volume_gpio)
3526                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3527         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3528                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3529
3530         if (btv->tuner_type == TUNER_ABSENT)
3531                 return;  /* no tuner or related drivers to load */
3532
3533         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3534                 /* Probe for RDS receiver chip */
3535                 static const unsigned short addrs[] = {
3536                         0x20 >> 1,
3537                         0x22 >> 1,
3538                         I2C_CLIENT_END
3539                 };
3540                 struct v4l2_subdev *sd;
3541
3542                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3543                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3544                 btv->has_saa6588 = (sd != NULL);
3545         }
3546
3547         /* try to detect audio/fader chips */
3548
3549         /* First check if the user specified the audio chip via a module
3550            option. */
3551
3552         switch (audiodev[btv->c.nr]) {
3553         case -1:
3554                 return; /* do not load any audio module */
3555
3556         case 0: /* autodetect */
3557                 break;
3558
3559         case 1: {
3560                 /* The user specified that we should probe for msp3400 */
3561                 static const unsigned short addrs[] = {
3562                         I2C_ADDR_MSP3400 >> 1,
3563                         I2C_ADDR_MSP3400_ALT >> 1,
3564                         I2C_CLIENT_END
3565                 };
3566
3567                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3568                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3569                 if (btv->sd_msp34xx)
3570                         return;
3571                 goto no_audio;
3572         }
3573
3574         case 2: {
3575                 /* The user specified that we should probe for tda7432 */
3576                 static const unsigned short addrs[] = {
3577                         I2C_ADDR_TDA7432 >> 1,
3578                         I2C_CLIENT_END
3579                 };
3580
3581                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3582                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3583                         return;
3584                 goto no_audio;
3585         }
3586
3587         case 3: {
3588                 /* The user specified that we should probe for tvaudio */
3589                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3590                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3591                 if (btv->sd_tvaudio)
3592                         return;
3593                 goto no_audio;
3594         }
3595
3596         default:
3597                 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3598                 return;
3599         }
3600
3601         /* There were no overrides, so now we try to discover this through the
3602            card definition */
3603
3604         /* probe for msp3400 first: this driver can detect whether or not
3605            it really is a msp3400, so it will return NULL when the device
3606            found is really something else (e.g. a tea6300). */
3607         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3608                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3609                         &btv->c.i2c_adap, "msp3400",
3610                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3611         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3612                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3613                         &btv->c.i2c_adap, "msp3400",
3614                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3615         }
3616
3617         /* If we found a msp34xx, then we're done. */
3618         if (btv->sd_msp34xx)
3619                 return;
3620
3621         /* Now see if we can find one of the tvaudio devices. */
3622         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3623                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3624         if (btv->sd_tvaudio) {
3625                 /* There may be two tvaudio chips on the card, so try to
3626                    find another. */
3627                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3628                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3629         }
3630
3631         /* it might also be a tda7432. */
3632         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3633                 static const unsigned short addrs[] = {
3634                         I2C_ADDR_TDA7432 >> 1,
3635                         I2C_CLIENT_END
3636                 };
3637
3638                 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3639                                 &btv->c.i2c_adap, "tda7432", 0, addrs);
3640                 if (btv->sd_tda7432)
3641                         return;
3642         }
3643         if (btv->sd_tvaudio)
3644                 return;
3645
3646 no_audio:
3647         pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3648 }
3649
3650
3651 /* initialize the tuner */
3652 void bttv_init_tuner(struct bttv *btv)
3653 {
3654         int addr = ADDR_UNSET;
3655
3656         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3657                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3658
3659         if (btv->tuner_type != TUNER_ABSENT) {
3660                 struct tuner_setup tun_setup;
3661
3662                 /* Load tuner module before issuing tuner config call! */
3663                 if (btv->has_radio)
3664                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3665                                 &btv->c.i2c_adap, "tuner",
3666                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3667                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3668                                 &btv->c.i2c_adap, "tuner",
3669                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3670                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3671                                 &btv->c.i2c_adap, "tuner",
3672                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3673
3674                 tun_setup.mode_mask = T_ANALOG_TV;
3675                 tun_setup.type = btv->tuner_type;
3676                 tun_setup.addr = addr;
3677
3678                 if (btv->has_radio)
3679                         tun_setup.mode_mask |= T_RADIO;
3680
3681                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3682         }
3683
3684         if (btv->tda9887_conf) {
3685                 struct v4l2_priv_tun_config tda9887_cfg;
3686
3687                 tda9887_cfg.tuner = TUNER_TDA9887;
3688                 tda9887_cfg.priv = &btv->tda9887_conf;
3689
3690                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3691         }
3692 }
3693
3694 /* ----------------------------------------------------------------------- */
3695
3696 static void modtec_eeprom(struct bttv *btv)
3697 {
3698         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3699                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3700                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3701                         btv->c.nr, &eeprom_data[0x1e]);
3702         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3703                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3704                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3705                         btv->c.nr, &eeprom_data[0x1e]);
3706         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3707                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3708                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3709                         btv->c.nr, &eeprom_data[0x1e]);
3710         } else {
3711                 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3712                         btv->c.nr, &eeprom_data[0x1e]);
3713         }
3714 }
3715
3716 static void hauppauge_eeprom(struct bttv *btv)
3717 {
3718         struct tveeprom tv;
3719
3720         tveeprom_hauppauge_analog(&tv, eeprom_data);
3721         btv->tuner_type = tv.tuner_type;
3722         btv->has_radio  = tv.has_radio;
3723
3724         pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3725                 btv->c.nr, tv.model);
3726
3727         /*
3728          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3729          * type based on model #.
3730          */
3731         if(tv.model == 64900) {
3732                 pr_info("%d: Switching board type from %s to %s\n",
3733                         btv->c.nr,
3734                         bttv_tvcards[btv->c.type].name,
3735                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3736                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3737         }
3738
3739         /* The 61334 needs the msp3410 to do the radio demod to get sound */
3740         if (tv.model == 61334)
3741                 btv->radio_uses_msp_demodulator = 1;
3742 }
3743
3744 /* ----------------------------------------------------------------------- */
3745
3746 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3747 {
3748         struct bttv *btv = tea->private_data;
3749         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3750         u16 val = 0;
3751
3752         val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3753         val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3754         val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3755
3756         gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3757         if (btv->mbox_ior) {
3758                 /* IOW and CSEL active */
3759                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3760                 udelay(5);
3761                 /* all inactive */
3762                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3763                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3764         }
3765 }
3766
3767 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3768 {
3769         struct bttv *btv = tea->private_data;
3770         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3771         u8 ret = 0;
3772         u16 val;
3773
3774         if (btv->mbox_ior) {
3775                 /* IOR and CSEL active */
3776                 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3777                 udelay(5);
3778         }
3779         val = gpio_read();
3780         if (btv->mbox_ior) {
3781                 /* all inactive */
3782                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3783                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3784         }
3785
3786         if (val & (1 << gpio.data))
3787                 ret |= TEA575X_DATA;
3788         if (val & (1 << gpio.most))
3789                 ret |= TEA575X_MOST;
3790
3791         return ret;
3792 }
3793
3794 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3795 {
3796         struct bttv *btv = tea->private_data;
3797         struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3798         u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3799                    (1 << gpio.most);
3800
3801         if (output)
3802                 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3803                                  (1 << gpio.wren));
3804         else
3805                 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3806 }
3807
3808 static const struct snd_tea575x_ops bttv_tea_ops = {
3809         .set_pins = bttv_tea575x_set_pins,
3810         .get_pins = bttv_tea575x_get_pins,
3811         .set_direction = bttv_tea575x_set_direction,
3812 };
3813
3814 static int tea575x_init(struct bttv *btv)
3815 {
3816         btv->tea.private_data = btv;
3817         btv->tea.ops = &bttv_tea_ops;
3818         if (!snd_tea575x_hw_init(&btv->tea)) {
3819                 pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3820                 btv->tea.mute = false;
3821                 return 0;
3822         }
3823
3824         btv->has_tea575x = 0;
3825         btv->has_radio = 0;
3826
3827         return -ENODEV;
3828 }
3829
3830 /* ----------------------------------------------------------------------- */
3831
3832 static int terratec_active_radio_upgrade(struct bttv *btv)
3833 {
3834         btv->has_radio    = 1;
3835         btv->has_tea575x  = 1;
3836         btv->tea_gpio.wren = 4;
3837         btv->tea_gpio.most = 5;
3838         btv->tea_gpio.clk  = 3;
3839         btv->tea_gpio.data = 2;
3840
3841         btv->mbox_iow     = 1 <<  8;
3842         btv->mbox_ior     = 1 <<  9;
3843         btv->mbox_csel    = 1 << 10;
3844
3845         if (!tea575x_init(btv)) {
3846                 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3847                 btv->has_saa6588 = 1;
3848         }
3849
3850         return 0;
3851 }
3852
3853
3854 /* ----------------------------------------------------------------------- */
3855
3856 /*
3857  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3858  *
3859  * /*(DEBLOBBED)*/
3860 #define PVR_GPIO_DELAY          10
3861
3862 #define BTTV_ALT_DATA           0x000001
3863 #define BTTV_ALT_DCLK           0x100000
3864 #define BTTV_ALT_NCONFIG        0x800000
3865
3866 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3867 {
3868         u32 n;
3869         u8 bits;
3870         int i;
3871
3872         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3873         gpio_write(0);
3874         udelay(PVR_GPIO_DELAY);
3875
3876         gpio_write(BTTV_ALT_NCONFIG);
3877         udelay(PVR_GPIO_DELAY);
3878
3879         for (n = 0; n < microlen; n++) {
3880                 bits = micro[n];
3881                 for (i = 0 ; i < 8 ; i++) {
3882                         gpio_bits(BTTV_ALT_DCLK,0);
3883                         if (bits & 0x01)
3884                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3885                         else
3886                                 gpio_bits(BTTV_ALT_DATA,0);
3887                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3888                         bits >>= 1;
3889                 }
3890         }
3891         gpio_bits(BTTV_ALT_DCLK,0);
3892         udelay(PVR_GPIO_DELAY);
3893
3894         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3895         for (i = 0 ; i < 30 ; i++) {
3896                 gpio_bits(BTTV_ALT_DCLK,0);
3897                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3898         }
3899         gpio_bits(BTTV_ALT_DCLK,0);
3900         return 0;
3901 }
3902
3903 static int pvr_boot(struct bttv *btv)
3904 {
3905         const struct firmware *fw_entry;
3906         int rc;
3907
3908         rc = reject_firmware(&fw_entry, "/*(DEBLOBBED)*/", &btv->c.pci->dev);
3909         if (rc != 0) {
3910                 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3911                 return rc;
3912         }
3913         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3914         pr_info("%d: altera firmware upload %s\n",
3915                 btv->c.nr, (rc < 0) ? "failed" : "ok");
3916         release_firmware(fw_entry);
3917         return rc;
3918 }
3919
3920 /* ----------------------------------------------------------------------- */
3921 /* some osprey specific stuff                                              */
3922
3923 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3924 {
3925         int i;
3926         u32 serial = 0;
3927         int cardid = -1;
3928
3929         /* This code will nevery actually get called in this case.... */
3930         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3931                 /* this might be an antique... check for MMAC label in eeprom */
3932                 if (!strncmp(ee, "MMAC", 4)) {
3933                         u8 checksum = 0;
3934                         for (i = 0; i < 21; i++)
3935                                 checksum += ee[i];
3936                         if (checksum != ee[21])
3937                                 return;
3938                         cardid = BTTV_BOARD_OSPREY1x0_848;
3939                         for (i = 12; i < 21; i++)
3940                                 serial *= 10, serial += ee[i] - '0';
3941                 }
3942         } else {
3943                 unsigned short type;
3944
3945                 for (i = 4 * 16; i < 8 * 16; i += 16) {
3946                         u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3947
3948                         if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3949                                 break;
3950                 }
3951                 if (i >= 8*16)
3952                         return;
3953                 ee += i;
3954
3955                 /* found a valid descriptor */
3956                 type = get_unaligned_be16((__be16 *)(ee+4));
3957
3958                 switch(type) {
3959                 /* 848 based */
3960                 case 0x0004:
3961                         cardid = BTTV_BOARD_OSPREY1x0_848;
3962                         break;
3963                 case 0x0005:
3964                         cardid = BTTV_BOARD_OSPREY101_848;
3965                         break;
3966
3967                 /* 878 based */
3968                 case 0x0012:
3969                 case 0x0013:
3970                         cardid = BTTV_BOARD_OSPREY1x0;
3971                         break;
3972                 case 0x0014:
3973                 case 0x0015:
3974                         cardid = BTTV_BOARD_OSPREY1x1;
3975                         break;
3976                 case 0x0016:
3977                 case 0x0017:
3978                 case 0x0020:
3979                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3980                         break;
3981                 case 0x0018:
3982                 case 0x0019:
3983                 case 0x001E:
3984                 case 0x001F:
3985                         cardid = BTTV_BOARD_OSPREY2xx;
3986                         break;
3987                 case 0x001A:
3988                 case 0x001B:
3989                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3990                         break;
3991                 case 0x0040:
3992                         cardid = BTTV_BOARD_OSPREY500;
3993                         break;
3994                 case 0x0050:
3995                 case 0x0056:
3996                         cardid = BTTV_BOARD_OSPREY540;
3997                         /* bttv_osprey_540_init(btv); */
3998                         break;
3999                 case 0x0060:
4000                 case 0x0070:
4001                 case 0x00A0:
4002                         cardid = BTTV_BOARD_OSPREY2x0;
4003                         /* enable output on select control lines */
4004                         gpio_inout(0xffffff,0x000303);
4005                         break;
4006                 case 0x00D8:
4007                         cardid = BTTV_BOARD_OSPREY440;
4008                         break;
4009                 default:
4010                         /* unknown...leave generic, but get serial # */
4011                         pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4012                                 btv->c.nr, type);
4013                         break;
4014                 }
4015                 serial = get_unaligned_be32((__be32 *)(ee+6));
4016         }
4017
4018         pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4019                 btv->c.nr, cardid,
4020                 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4021
4022         if (cardid<0 || btv->c.type == cardid)
4023                 return;
4024
4025         /* card type isn't set correctly */
4026         if (card[btv->c.nr] < bttv_num_tvcards) {
4027                 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4028                         btv->c.nr);
4029         } else {
4030                 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4031                         btv->c.nr, btv->c.type, cardid);
4032                 btv->c.type = cardid;
4033         }
4034 }
4035
4036 /* ----------------------------------------------------------------------- */
4037 /* AVermedia specific stuff, from  bktr_card.c                             */
4038
4039 static int tuner_0_table[] = {
4040         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4041         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4042         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4043         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4044         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4045         TUNER_PHILIPS_FM1216ME_MK3 };
4046
4047 static int tuner_1_table[] = {
4048         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4049         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4050         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4051         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4052         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4053
4054 static void avermedia_eeprom(struct bttv *btv)
4055 {
4056         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4057
4058         tuner_make      = (eeprom_data[0x41] & 0x7);
4059         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4060         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4061         btv->has_remote = (eeprom_data[0x42] & 0x01);
4062
4063         if (tuner_make == 0 || tuner_make == 2)
4064                 if (tuner_format <= 0x0a)
4065                         tuner_type = tuner_0_table[tuner_format];
4066         if (tuner_make == 1)
4067                 if (tuner_format <= 9)
4068                         tuner_type = tuner_1_table[tuner_format];
4069
4070         if (tuner_make == 4)
4071                 if (tuner_format == 0x09)
4072                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4073
4074         pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4075                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4076         if (tuner_type) {
4077                 btv->tuner_type = tuner_type;
4078                 pr_cont("%d", tuner_type);
4079         } else
4080                 pr_cont("Unknown type");
4081         pr_cont(" radio:%s remote control:%s\n",
4082                tuner_tv_fm     ? "yes" : "no",
4083                btv->has_remote ? "yes" : "no");
4084 }
4085
4086 /*
4087  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4088  * analog demod, which is not I2C controlled like the newer and more common
4089  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
4090  * that control the IF for the video and audio.  Apparently, bttv GPIO
4091  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4092  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4093  */
4094 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4095 {
4096
4097         if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4098                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4099                         gpiobits |= 0x10000;
4100                 else
4101                         gpiobits &= ~0x10000;
4102         }
4103
4104         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4105         return gpiobits;
4106 }
4107
4108
4109 /*
4110  * reset/enable the MSP on some Hauppauge cards
4111  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4112  *
4113  * Hauppauge:  pin  5
4114  * Voodoo:     pin 20
4115  */
4116 static void boot_msp34xx(struct bttv *btv, int pin)
4117 {
4118         int mask = (1 << pin);
4119
4120         gpio_inout(mask,mask);
4121         gpio_bits(mask,0);
4122         mdelay(2);
4123         udelay(500);
4124         gpio_bits(mask,mask);
4125
4126         if (bttv_gpio)
4127                 bttv_gpio_tracking(btv,"msp34xx");
4128         if (bttv_verbose)
4129                 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4130                         btv->c.nr, pin);
4131 }
4132
4133 /* ----------------------------------------------------------------------- */
4134 /*  Imagenation L-Model PXC200 Framegrabber */
4135 /*  This is basically the same procedure as
4136  *  used by Alessandro Rubini in his pxc200
4137  *  driver, but using BTTV functions */
4138
4139 static void init_PXC200(struct bttv *btv)
4140 {
4141         static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4142                               0x03, 0x04, 0x05, 0x06, 0x00 };
4143         unsigned int i;
4144         int tmp;
4145         u32 val;
4146
4147         /* Initialise GPIO-connevted stuff */
4148         gpio_inout(0xffffff, (1<<13));
4149         gpio_write(0);
4150         udelay(3);
4151         gpio_write(1<<13);
4152         /* GPIO inputs are pulled up, so no need to drive
4153          * reset pin any longer */
4154         gpio_bits(0xffffff, 0);
4155         if (bttv_gpio)
4156                 bttv_gpio_tracking(btv,"pxc200");
4157
4158         /*  we could/should try and reset/control the AD pots? but
4159             right now  we simply  turned off the crushing.  Without
4160             this the AGC drifts drifts
4161             remember the EN is reverse logic -->
4162             setting BT848_ADC_AGC_EN disable the AGC
4163             tboult@eecs.lehigh.edu
4164         */
4165
4166         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4167
4168         /*      Initialise MAX517 DAC */
4169         pr_info("Setting DAC reference voltage level ...\n");
4170         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4171
4172         /*      Initialise 12C508 PIC */
4173         /*      The I2CWrite and I2CRead commmands are actually to the
4174          *      same chips - but the R/W bit is included in the address
4175          *      argument so the numbers are different */
4176
4177
4178         pr_info("Initialising 12C508 PIC chip ...\n");
4179
4180         /* First of all, enable the clock line. This is used in the PXC200-F */
4181         val = btread(BT848_GPIO_DMA_CTL);
4182         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4183         btwrite(val, BT848_GPIO_DMA_CTL);
4184
4185         /* Then, push to 0 the reset pin long enough to reset the *
4186          * device same as above for the reset line, but not the same
4187          * value sent to the GPIO-connected stuff
4188          * which one is the good one? */
4189         gpio_inout(0xffffff,(1<<2));
4190         gpio_write(0);
4191         udelay(10);
4192         gpio_write(1<<2);
4193
4194         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4195                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4196                 if (tmp != -1) {
4197                         pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4198                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4199                 }
4200         }
4201
4202         pr_info("PXC200 Initialised\n");
4203 }
4204
4205
4206
4207 /* ----------------------------------------------------------------------- */
4208 /*
4209  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4210  *  it. This apparently involves the following procedure for each 878 chip:
4211  *
4212  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4213  *
4214  *  2)  write to GPIO_DATA
4215  *      - 0x0E
4216  *      - sleep 1ms
4217  *      - 0x10 + 0x0E
4218  *      - sleep 10ms
4219  *      - 0x0E
4220  *     read from GPIO_DATA into buf (uint_32)
4221  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4222  *                 error. ERROR_CPLD_Check_Failed stop.
4223  *
4224  *  3) write to GPIO_DATA
4225  *      - write 0x4400 + 0x0E
4226  *      - sleep 10ms
4227  *      - write 0x4410 + 0x0E
4228  *      - sleep 1ms
4229  *      - write 0x0E
4230  *     read from GPIO_DATA into buf (uint_32)
4231  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4232  *                error. ERROR_CPLD_Check_Failed.
4233  */
4234 /* ----------------------------------------------------------------------- */
4235 static void
4236 init_RTV24 (struct bttv *btv)
4237 {
4238         uint32_t dataRead = 0;
4239         long watchdog_value = 0x0E;
4240
4241         pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4242                 btv->c.nr);
4243
4244         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4245
4246         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4247         msleep (1);
4248         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4249         msleep (10);
4250         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4251
4252         dataRead = btread (BT848_GPIO_DATA);
4253
4254         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4255                 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4256                         btv->c.nr, dataRead);
4257         }
4258
4259         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4260         msleep (10);
4261         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4262         msleep (1);
4263         btwrite (watchdog_value, BT848_GPIO_DATA);
4264         msleep (1);
4265         dataRead = btread (BT848_GPIO_DATA);
4266
4267         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4268                 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4269                         btv->c.nr, dataRead);
4270
4271                 return;
4272         }
4273
4274         pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4275 }
4276
4277
4278
4279 /* ----------------------------------------------------------------------- */
4280 /*
4281  *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4282  *  the PCI REQ signals comming from the four BT878 chips. After power
4283  *  up, the CPLD does not forward requests to the bus, which prevents
4284  *  the BT878 from fetching RISC instructions from memory. While the
4285  *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4286  *  five appear to play a role in unlocking the REQ signal. The following
4287  *  sequence has been determined by trial and error without access to the
4288  *  original driver.
4289  *
4290  *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4291  *  Devices 0xE and 0xF do not appear to have anything connected to their
4292  *  GPIOs.
4293  *
4294  *  The correct GPIO_OUT_EN value might have some more bits set. It should
4295  *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4296  *  pins are routed to test points.
4297  *
4298  */
4299 /* ----------------------------------------------------------------------- */
4300 static void
4301 init_PCI8604PW(struct bttv *btv)
4302 {
4303         int state;
4304
4305         if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4306                 pr_warn("This is not a PCI-8604PW\n");
4307                 return;
4308         }
4309
4310         if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4311                 return;
4312
4313         btwrite(0x080002, BT848_GPIO_OUT_EN);
4314
4315         state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4316
4317         for (;;) {
4318                 switch (state) {
4319                 case 1:
4320                 case 5:
4321                 case 6:
4322                 case 4:
4323                         pr_debug("PCI-8604PW in state %i, toggling pin\n",
4324                                  state);
4325                         btwrite(0x080000, BT848_GPIO_DATA);
4326                         msleep(1);
4327                         btwrite(0x000000, BT848_GPIO_DATA);
4328                         msleep(1);
4329                         break;
4330                 case 7:
4331                         pr_info("PCI-8604PW unlocked\n");
4332                         return;
4333                 case 0:
4334                         /* FIXME: If we are in state 7 and toggle GPIO[19] one
4335                            more time, the CPLD goes into state 0, where PCI bus
4336                            mastering is inhibited again. We have not managed to
4337                            get out of that state. */
4338
4339                         pr_err("PCI-8604PW locked until reset\n");
4340                         return;
4341                 default:
4342                         pr_err("PCI-8604PW in unknown state %i\n", state);
4343                         return;
4344                 }
4345
4346                 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4347
4348                 switch (state) {
4349                 case 0x15:
4350                 case 0x56:
4351                 case 0x64:
4352                 case 0x47:
4353                 /* The transition from state 7 to state 0 is, as explained
4354                    above, valid but undesired and with this code impossible
4355                    as we exit as soon as we are in state 7.
4356                 case 0x70: */
4357                         break;
4358                 default:
4359                         pr_err("PCI-8604PW invalid transition %i -> %i\n",
4360                                state >> 4, state & 7);
4361                         return;
4362                 }
4363                 state &= 7;
4364         }
4365 }
4366
4367 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4368  *
4369  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4370  * switch instead (CD22M3494E). This IC can have multiple active connections
4371  * between Xn (input) and Yn (output) pins. We need to clear any existing
4372  * connection prior to establish a new one, pulsing the STROBE pin.
4373  *
4374  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4375  * GPIO pins are wired as:
4376  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4377  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4378  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4379  *  GPIO[8]   -                  - P3[5] (microcontroller)
4380  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4381  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4382  *  GPINTR    -                  - P3[4] (microcontroller)
4383  *
4384  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4385  * configuration either directly (as we are doing) or using the microcontroller
4386  * which is also wired to I2C interface. I have no further info on the
4387  * microcontroller features, one would need to disassembly the firmware.
4388  * note: the vendor refused to give any information on this product, all
4389  *       that stuff was found using a multimeter! :)
4390  */
4391 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4392 {
4393         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4394                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4395
4396         gpio_bits(0x07f, muxgpio[input]);
4397
4398         /* reset all conections */
4399         gpio_bits(0x200,0x200);
4400         mdelay(1);
4401         gpio_bits(0x200,0x000);
4402         mdelay(1);
4403
4404         /* create a new connection */
4405         gpio_bits(0x480,0x480);
4406         mdelay(1);
4407         gpio_bits(0x480,0x080);
4408         mdelay(1);
4409 }
4410
4411 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4412  *
4413  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4414  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4415  * chips, ten eight input analog multiplexors, a not chip and a few
4416  * other components.
4417  *
4418  * 16 inputs on a secondary bracket are provided and can be selected
4419  * from each of the four capture chips.  Two of the eight input
4420  * multiplexors are used to select from any of the 16 input signals.
4421  *
4422  * Unsupported hardware capabilities:
4423  *  . A video output monitor on the secondary bracket can be selected from
4424  *    one of the 878A chips.
4425  *  . Another passthrough but I haven't spent any time investigating it.
4426  *  . Digital I/O (logic level connected to GPIO) is available from an
4427  *    onboard header.
4428  *
4429  * The on chip input mux should always be set to 2.
4430  * GPIO[16:19] - Video input selection
4431  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4432  * GPIO[?:?]   - Digital I/O.
4433  *
4434  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4435  * determined what function (if any) it provides.  With the microcontroller
4436  * and sync separator chips a guess is that it might have to do with video
4437  * switching and maybe some digital I/O.
4438  */
4439 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4440 {
4441         /* video mux */
4442         gpio_bits(0x0f0000, input << 16);
4443 }
4444
4445 static void tibetCS16_init(struct bttv *btv)
4446 {
4447         /* enable gpio bits, mask obtained via btSpy */
4448         gpio_inout(0xffffff, 0x0f7fff);
4449         gpio_write(0x0f7fff);
4450 }
4451
4452 /*
4453  * The following routines for the Kodicom-4400r get a little mind-twisting.
4454  * There is a "master" controller and three "slave" controllers, together
4455  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4456  * The analog switch is controlled by the "master", but the detection order
4457  * of the four BT878A chips is in an order which I just don't understand.
4458  * The "master" is actually the second controller to be detected.  The
4459  * logic on the board uses logical numbers for the 4 controllers, but
4460  * those numbers are different from the detection sequence.  When working
4461  * with the analog switch, we need to "map" from the detection sequence
4462  * over to the board's logical controller number.  This mapping sequence
4463  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4464  * unit 3, the second (which is the master) is logical unit 0, etc.
4465  * We need to maintain the status of the analog switch (which of the 16
4466  * cameras is connected to which of the 4 controllers) in sw_status array.
4467  */
4468
4469 /*
4470  * First a routine to set the analog switch, which controls which camera
4471  * is routed to which controller.  The switch comprises an X-address
4472  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4473  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4474  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4475  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4476  * specified address.  The idea is to set the address and data, then bring
4477  * STROBE high, and finally bring STROBE back to low.
4478  */
4479 static void kodicom4400r_write(struct bttv *btv,
4480                                unsigned char xaddr,
4481                                unsigned char yaddr,
4482                                unsigned char data) {
4483         unsigned int udata;
4484
4485         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4486         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4487         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4488         gpio_bits(0x1ff, udata);                /* strobe low */
4489 }
4490
4491 /*
4492  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4493  * use this routine.  The routine finds the "master" for the card, maps
4494  * the controller number from the detected position over to the logical
4495  * number, writes the appropriate data to the analog switch, and housekeeps
4496  * the local copy of the switch information.  The parameter 'input' is the
4497  * requested camera number (0 - 15).
4498  */
4499 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4500 {
4501         int xaddr, yaddr;
4502         struct bttv *mctlr;
4503         static unsigned char map[4] = {3, 0, 2, 1};
4504
4505         mctlr = master[btv->c.nr];
4506         if (mctlr == NULL) {    /* ignore if master not yet detected */
4507                 return;
4508         }
4509         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4510         yaddr = map[yaddr];
4511         xaddr = input & 0xf;
4512         /* Check if the controller/camera pair has changed, else ignore */
4513         if (mctlr->sw_status[yaddr] != xaddr)
4514         {
4515                 /* "open" the old switch, "close" the new one, save the new */
4516                 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4517                 mctlr->sw_status[yaddr] = xaddr;
4518                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4519         }
4520 }
4521
4522 /*
4523  * During initialisation, we need to reset the analog switch.  We
4524  * also preset the switch to map the 4 connectors on the card to the
4525  * *user's* (see above description of kodicom4400r_muxsel) channels
4526  * 0 through 3
4527  */
4528 static void kodicom4400r_init(struct bttv *btv)
4529 {
4530         int ix;
4531
4532         gpio_inout(0x0003ff, 0x0003ff);
4533         gpio_write(1 << 9);     /* reset MUX */
4534         gpio_write(0);
4535         /* Preset camera 0 to the 4 controllers */
4536         for (ix = 0; ix < 4; ix++) {
4537                 btv->sw_status[ix] = ix;
4538                 kodicom4400r_write(btv, ix, ix, 1);
4539         }
4540         /*
4541          * Since this is the "master", we need to set up the
4542          * other three controller chips' pointers to this structure
4543          * for later use in the muxsel routine.
4544          */
4545         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4546             return;
4547         master[btv->c.nr-1] = btv;
4548         master[btv->c.nr]   = btv;
4549         master[btv->c.nr+1] = btv;
4550         master[btv->c.nr+2] = btv;
4551 }
4552
4553 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4554  * video multiplexers to provide up to 16 video inputs. These
4555  * multiplexers are controlled by the lower 8 GPIO pins of the
4556  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4557
4558  * xxx0 is pin xxx of multiplexer U5,
4559  * yyy1 is pin yyy of multiplexer U2
4560  */
4561 #define ENA0    0x01
4562 #define ENB0    0x02
4563 #define ENA1    0x04
4564 #define ENB1    0x08
4565
4566 #define IN10    0x10
4567 #define IN00    0x20
4568 #define IN11    0x40
4569 #define IN01    0x80
4570
4571 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4572 {
4573         static const int masks[] = {
4574                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4575                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4576                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4577                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4578         };
4579         gpio_write(masks[input%16]);
4580 }
4581 static void picolo_tetra_init(struct bttv *btv)
4582 {
4583         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4584         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4585         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4586 }
4587 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4588 {
4589
4590         dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4591         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4592         /*GPIO[20]&GPIO[21] used to choose the right input*/
4593         btwrite (input<<20,BT848_GPIO_DATA);
4594
4595 }
4596
4597 /*
4598  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4599  *
4600  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4601  * swichers to provide 16 channels to MUX0. The TDA8540's have
4602  * 4 independent outputs and as such the IVC120G also has the
4603  * optional "Monitor Out" bus. This allows the card to be looking
4604  * at one input while the monitor is looking at another.
4605  *
4606  * Since I've couldn't be bothered figuring out how to add an
4607  * independent muxsel for the monitor bus, I've just set it to
4608  * whatever the card is looking at.
4609  *
4610  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4611  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4612  *
4613  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4614  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4615  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4616  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4617  *
4618  */
4619
4620 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4621 #define I2C_TDA8540        0x90
4622 #define I2C_TDA8540_ALT1   0x92
4623 #define I2C_TDA8540_ALT2   0x94
4624 #define I2C_TDA8540_ALT3   0x96
4625 #define I2C_TDA8540_ALT4   0x98
4626 #define I2C_TDA8540_ALT5   0x9a
4627 #define I2C_TDA8540_ALT6   0x9c
4628
4629 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4630 {
4631         /* Simple maths */
4632         int key = input % 4;
4633         int matrix = input / 4;
4634
4635         dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4636                 btv->c.nr, input, matrix, key);
4637
4638         /* Handles the input selection on the TDA8540's */
4639         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4640                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4641         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4642                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4643         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4644                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4645         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4646                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4647
4648         /* Handles the output enables on the TDA8540's */
4649         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4650                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4651         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4652                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4653         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4654                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4655         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4656                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4657
4658         /* 878's MUX0 is already selected for input via muxsel values */
4659 }
4660
4661
4662 /* PXC200 muxsel helper
4663  * luke@syseng.anu.edu.au
4664  * another transplant
4665  * from Alessandro Rubini (rubini@linux.it)
4666  *
4667  * There are 4 kinds of cards:
4668  * PXC200L which is bt848
4669  * PXC200F which is bt848 with PIC controlling mux
4670  * PXC200AL which is bt878
4671  * PXC200AF which is bt878 with PIC controlling mux
4672  */
4673 #define PX_CFG_PXC200F 0x01
4674 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4675 #define PX_I2C_PIC       0x0f
4676 #define PX_PXC200A_CARDID 0x200a1295
4677 #define PX_I2C_CMD_CFG   0x00
4678
4679 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4680 {
4681         int rc;
4682         long mux;
4683         int bitmask;
4684         unsigned char buf[2];
4685
4686         /* Read PIC config to determine if this is a PXC200F */
4687         /* PX_I2C_CMD_CFG*/
4688         buf[0]=0;
4689         buf[1]=0;
4690         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4691         if (rc) {
4692                 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4693                          btv->c.nr, rc);
4694           /* not PXC ? do nothing */
4695                 return;
4696         }
4697
4698         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4699         if (!(rc & PX_CFG_PXC200F)) {
4700                 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4701                          btv->c.nr, rc);
4702                 return;
4703         }
4704
4705
4706         /* The multiplexer in the 200F is handled by the GPIO port */
4707         /* get correct mapping between inputs  */
4708         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4709         /* ** not needed!?   */
4710         mux = input;
4711
4712         /* make sure output pins are enabled */
4713         /* bitmask=0x30f; */
4714         bitmask=0x302;
4715         /* check whether we have a PXC200A */
4716         if (btv->cardid == PX_PXC200A_CARDID)  {
4717            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4718            bitmask |= 7<<4; /* the DAC */
4719         }
4720         btwrite(bitmask, BT848_GPIO_OUT_EN);
4721
4722         bitmask = btread(BT848_GPIO_DATA);
4723         if (btv->cardid == PX_PXC200A_CARDID)
4724           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4725         else /* older device */
4726           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4727         btwrite(bitmask,BT848_GPIO_DATA);
4728
4729         /*
4730          * Was "to be safe, set the bt848 to input 0"
4731          * Actually, since it's ok at load time, better not messing
4732          * with these bits (on PXC200AF you need to set mux 2 here)
4733          *
4734          * needed because bttv-driver sets mux before calling this function
4735          */
4736         if (btv->cardid == PX_PXC200A_CARDID)
4737           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4738         else /* older device */
4739           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4740
4741         pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4742 }
4743
4744 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4745 {
4746         unsigned int mux = input % 4;
4747
4748         if (input == btv->svhs)
4749                 mux = 0;
4750
4751         gpio_bits(0x3, mux);
4752 }
4753
4754 /*
4755  * GeoVision GV-800(S) functions
4756  * Bruno Christo <bchristo@inf.ufsm.br>
4757 */
4758
4759 /* This is a function to control the analog switch, which determines which
4760  * camera is routed to which controller.  The switch comprises an X-address
4761  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4762  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4763  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4764  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4765  * specified address. There is also a chip select (gpio bit 16).
4766  * The idea is to set the address and chip select together, bring
4767  * STROBE high, write the data, and finally bring STROBE back to low.
4768  */
4769 static void gv800s_write(struct bttv *btv,
4770                          unsigned char xaddr,
4771                          unsigned char yaddr,
4772                          unsigned char data) {
4773         /* On the "master" 878A:
4774         * GPIO bits 0-9 are used for the analog switch:
4775         *   00 - 03:    camera selector
4776         *   04 - 06:    878A (controller) selector
4777         *   16:         cselect
4778         *   17:         strobe
4779         *   18:         data (1->on, 0->off)
4780         *   19:         reset
4781         */
4782         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4783         const u32 CSELECT = 1<<16;
4784         const u32 STROBE = 1<<17;
4785         const u32 DATA = data<<18;
4786
4787         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4788         gpio_bits(0x20000, STROBE);             /* STROBE high */
4789         gpio_bits(0x40000, DATA);               /* write DATA */
4790         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4791 }
4792
4793 /*
4794  * GeoVision GV-800(S) muxsel
4795  *
4796  * Each of the 4 cards (controllers) use this function.
4797  * The controller using this function selects the input through the GPIO pins
4798  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4799  *
4800  * The parameter 'input' is the requested camera number (0-4) on the controller.
4801  * The map array has the address of each input. Note that the addresses in the
4802  * array are in the sequence the original GeoVision driver uses, that is, set
4803  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4804  * the physical "camera 1" connector corresponds to controller 0 input 0,
4805  * "camera 2" corresponds to controller 1 input 0, and so on.
4806  *
4807  * After getting the input address, the function then writes the appropriate
4808  * data to the analog switch, and housekeeps the local copy of the switch
4809  * information.
4810  */
4811 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4812 {
4813         struct bttv *mctlr;
4814         int xaddr, yaddr;
4815         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4816                                           { 0x1, 0x5, 0xb, 0x7 },
4817                                           { 0x2, 0x8, 0xc, 0xe },
4818                                           { 0x3, 0x9, 0xd, 0xf } };
4819         input = input%4;
4820         mctlr = master[btv->c.nr];
4821         if (mctlr == NULL) {
4822                 /* do nothing until the "master" is detected */
4823                 return;
4824         }
4825         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4826         xaddr = map[yaddr][input] & 0xf;
4827
4828         /* Check if the controller/camera pair has changed, ignore otherwise */
4829         if (mctlr->sw_status[yaddr] != xaddr) {
4830                 /* disable the old switch, enable the new one and save status */
4831                 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4832                 mctlr->sw_status[yaddr] = xaddr;
4833                 gv800s_write(mctlr, xaddr, yaddr, 1);
4834         }
4835 }
4836
4837 /* GeoVision GV-800(S) "master" chip init */
4838 static void gv800s_init(struct bttv *btv)
4839 {
4840         int ix;
4841
4842         gpio_inout(0xf107f, 0xf107f);
4843         gpio_write(1<<19); /* reset the analog MUX */
4844         gpio_write(0);
4845
4846         /* Preset camera 0 to the 4 controllers */
4847         for (ix = 0; ix < 4; ix++) {
4848                 btv->sw_status[ix] = ix;
4849                 gv800s_write(btv, ix, ix, 1);
4850         }
4851
4852         /* Inputs on the "master" controller need this brightness fix */
4853         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4854
4855         if (btv->c.nr > BTTV_MAX-4)
4856                 return;
4857         /*
4858          * Store the "master" controller pointer in the master
4859          * array for later use in the muxsel function.
4860          */
4861         master[btv->c.nr]   = btv;
4862         master[btv->c.nr+1] = btv;
4863         master[btv->c.nr+2] = btv;
4864         master[btv->c.nr+3] = btv;
4865 }
4866
4867 /* ----------------------------------------------------------------------- */
4868 /* motherboard chipset specific stuff                                      */
4869
4870 void __init bttv_check_chipset(void)
4871 {
4872         int pcipci_fail = 0;
4873         struct pci_dev *dev = NULL;
4874
4875         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4876                 pcipci_fail = 1;
4877         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4878                 triton1 = 1;
4879         if (pci_pci_problems & PCIPCI_VSFX)
4880                 vsfx = 1;
4881 #ifdef PCIPCI_ALIMAGIK
4882         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4883                 latency = 0x0A;
4884 #endif
4885
4886
4887         /* print warnings about any quirks found */
4888         if (triton1)
4889                 pr_info("Host bridge needs ETBF enabled\n");
4890         if (vsfx)
4891                 pr_info("Host bridge needs VSFX enabled\n");
4892         if (pcipci_fail) {
4893                 pr_info("bttv and your chipset may not work together\n");
4894                 if (!no_overlay) {
4895                         pr_info("overlay will be disabled\n");
4896                         no_overlay = 1;
4897                 } else {
4898                         pr_info("overlay forced. Use this option at your own risk.\n");
4899                 }
4900         }
4901         if (UNSET != latency)
4902                 pr_info("pci latency fixup [%d]\n", latency);
4903         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4904                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4905                 unsigned char b;
4906                 pci_read_config_byte(dev, 0x53, &b);
4907                 if (bttv_debug)
4908                         pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4909                                 b);
4910         }
4911 }
4912
4913 int bttv_handle_chipset(struct bttv *btv)
4914 {
4915         unsigned char command;
4916
4917         if (!triton1 && !vsfx && UNSET == latency)
4918                 return 0;
4919
4920         if (bttv_verbose) {
4921                 if (triton1)
4922                         pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4923                                 btv->c.nr);
4924                 if (vsfx && btv->id >= 878)
4925                         pr_info("%d: enabling VSFX\n", btv->c.nr);
4926                 if (UNSET != latency)
4927                         pr_info("%d: setting pci timer to %d\n",
4928                                 btv->c.nr, latency);
4929         }
4930
4931         if (btv->id < 878) {
4932                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4933                 if (triton1)
4934                         btv->triton1 = BT848_INT_ETBF;
4935         } else {
4936                 /* bt878 has a bit in the pci config space for it */
4937                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4938                 if (triton1)
4939                         command |= BT878_EN_TBFX;
4940                 if (vsfx)
4941                         command |= BT878_EN_VSFX;
4942                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4943         }
4944         if (UNSET != latency)
4945                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4946         return 0;
4947 }