drivers/media/usb/dvb-usb-v2/ec168.c

   1 /*
   2  * E3C EC168 DVB USB driver
   3  *
   4  * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
   5  *
   6  *    This program is free software; you can redistribute it and/or modify
   7  *    it under the terms of the GNU General Public License as published by
   8  *    the Free Software Foundation; either version 2 of the License, or
   9  *    (at your option) any later version.
  10  *
  11  *    This program is distributed in the hope that it will be useful,
  12  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *    GNU General Public License for more details.
  15  *
  16  */
  17
  18 #include "ec168.h"
  19 #include "ec100.h"
  20 #include "mxl5005s.h"
  21
  22 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  23
  24 static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
  25 {
  26         int ret;
  27         unsigned int pipe;
  28         u8 request, requesttype;
  29         u8 *buf;
  30
  31         switch (req->cmd) {
  32         case DOWNLOAD_FIRMWARE:
  33         case GPIO:
  34         case WRITE_I2C:
  35         case STREAMING_CTRL:
  36                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  37                 request = req->cmd;
  38                 break;
  39         case READ_I2C:
  40                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  41                 request = req->cmd;
  42                 break;
  43         case GET_CONFIG:
  44                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  45                 request = CONFIG;
  46                 break;
  47         case SET_CONFIG:
  48                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  49                 request = CONFIG;
  50                 break;
  51         case WRITE_DEMOD:
  52                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  53                 request = DEMOD_RW;
  54                 break;
  55         case READ_DEMOD:
  56                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  57                 request = DEMOD_RW;
  58                 break;
  59         default:
  60                 dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
  61                                 KBUILD_MODNAME, req->cmd);
  62                 ret = -EINVAL;
  63                 goto error;
  64         }
  65
  66         buf = kmalloc(req->size, GFP_KERNEL);
  67         if (!buf) {
  68                 ret = -ENOMEM;
  69                 goto error;
  70         }
  71
  72         if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
  73                 /* write */
  74                 memcpy(buf, req->data, req->size);
  75                 pipe = usb_sndctrlpipe(d->udev, 0);
  76         } else {
  77                 /* read */
  78                 pipe = usb_rcvctrlpipe(d->udev, 0);
  79         }
  80
  81         msleep(1); /* avoid I2C errors */
  82
  83         ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
  84                 req->index, buf, req->size, EC168_USB_TIMEOUT);
  85
  86         dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value,
  87                         req->index, buf, req->size);
  88
  89         if (ret < 0)
  90                 goto err_dealloc;
  91         else
  92                 ret = 0;
  93
  94         /* read request, copy returned data to return buf */
  95         if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
  96                 memcpy(req->data, buf, req->size);
  97
  98         kfree(buf);
  99         return ret;
 100
 101 err_dealloc:
 102         kfree(buf);
 103 error:
 104         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 105         return ret;
 106 }
 107
 108 /* I2C */
 109 static struct ec100_config ec168_ec100_config;
 110
 111 static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 112         int num)
 113 {
 114         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 115         struct ec168_req req;
 116         int i = 0;
 117         int ret;
 118
 119         if (num > 2)
 120                 return -EINVAL;
 121
 122         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 123                 return -EAGAIN;
 124
 125         while (i < num) {
 126                 if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 127                         if (msg[i].addr == ec168_ec100_config.demod_address) {
 128                                 req.cmd = READ_DEMOD;
 129                                 req.value = 0;
 130                                 req.index = 0xff00 + msg[i].buf[0]; /* reg */
 131                                 req.size = msg[i+1].len; /* bytes to read */
 132                                 req.data = &msg[i+1].buf[0];
 133                                 ret = ec168_ctrl_msg(d, &req);
 134                                 i += 2;
 135                         } else {
 136                                 dev_err(&d->udev->dev, "%s: I2C read not " \
 137                                                 "implemented\n",
 138                                                 KBUILD_MODNAME);
 139                                 ret = -EOPNOTSUPP;
 140                                 i += 2;
 141                         }
 142                 } else {
 143                         if (msg[i].addr == ec168_ec100_config.demod_address) {
 144                                 req.cmd = WRITE_DEMOD;
 145                                 req.value = msg[i].buf[1]; /* val */
 146                                 req.index = 0xff00 + msg[i].buf[0]; /* reg */
 147                                 req.size = 0;
 148                                 req.data = NULL;
 149                                 ret = ec168_ctrl_msg(d, &req);
 150                                 i += 1;
 151                         } else {
 152                                 req.cmd = WRITE_I2C;
 153                                 req.value = msg[i].buf[0]; /* val */
 154                                 req.index = 0x0100 + msg[i].addr; /* I2C addr */
 155                                 req.size = msg[i].len-1;
 156                                 req.data = &msg[i].buf[1];
 157                                 ret = ec168_ctrl_msg(d, &req);
 158                                 i += 1;
 159                         }
 160                 }
 161                 if (ret)
 162                         goto error;
 163
 164         }
 165         ret = i;
 166
 167 error:
 168         mutex_unlock(&d->i2c_mutex);
 169         return ret;
 170 }
 171
 172 static u32 ec168_i2c_func(struct i2c_adapter *adapter)
 173 {
 174         return I2C_FUNC_I2C;
 175 }
 176
 177 static struct i2c_algorithm ec168_i2c_algo = {
 178         .master_xfer   = ec168_i2c_xfer,
 179         .functionality = ec168_i2c_func,
 180 };
 181
 182 /* Callbacks for DVB USB */
 183 static int ec168_identify_state(struct dvb_usb_device *d, const char **name)
 184 {
 185         int ret;
 186         u8 reply;
 187         struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
 188         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 189
 190         ret = ec168_ctrl_msg(d, &req);
 191         if (ret)
 192                 goto error;
 193
 194         dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
 195
 196         if (reply == 0x01)
 197                 ret = WARM;
 198         else
 199                 ret = COLD;
 200
 201         return ret;
 202 error:
 203         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 204         return ret;
 205 }
 206
 207 static int ec168_download_firmware(struct dvb_usb_device *d,
 208                 const struct firmware *fw)
 209 {
 210         int ret, len, remaining;
 211         struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
 212         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 213
 214         #define LEN_MAX 2048 /* max packet size */
 215         for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
 216                 len = remaining;
 217                 if (len > LEN_MAX)
 218                         len = LEN_MAX;
 219
 220                 req.size = len;
 221                 req.data = (u8 *) &fw->data[fw->size - remaining];
 222                 req.index = fw->size - remaining;
 223
 224                 ret = ec168_ctrl_msg(d, &req);
 225                 if (ret) {
 226                         dev_err(&d->udev->dev,
 227                                         "%s: firmware download failed=%d\n",
 228                                         KBUILD_MODNAME, ret);
 229                         goto error;
 230                 }
 231         }
 232
 233         req.size = 0;
 234
 235         /* set "warm"? */
 236         req.cmd = SET_CONFIG;
 237         req.value = 0;
 238         req.index = 0x0001;
 239         ret = ec168_ctrl_msg(d, &req);
 240         if (ret)
 241                 goto error;
 242
 243         /* really needed - no idea what does */
 244         req.cmd = GPIO;
 245         req.value = 0;
 246         req.index = 0x0206;
 247         ret = ec168_ctrl_msg(d, &req);
 248         if (ret)
 249                 goto error;
 250
 251         /* activate tuner I2C? */
 252         req.cmd = WRITE_I2C;
 253         req.value = 0;
 254         req.index = 0x00c6;
 255         ret = ec168_ctrl_msg(d, &req);
 256         if (ret)
 257                 goto error;
 258
 259         return ret;
 260 error:
 261         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 262         return ret;
 263 }
 264
 265 static struct ec100_config ec168_ec100_config = {
 266         .demod_address = 0xff, /* not real address, demod is integrated */
 267 };
 268
 269 static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
 270 {
 271         struct dvb_usb_device *d = adap_to_d(adap);
 272         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 273
 274         adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
 275                         &d->i2c_adap);
 276         if (adap->fe[0] == NULL)
 277                 return -ENODEV;
 278
 279         return 0;
 280 }
 281
 282 static struct mxl5005s_config ec168_mxl5003s_config = {
 283         .i2c_address     = 0xc6,
 284         .if_freq         = IF_FREQ_4570000HZ,
 285         .xtal_freq       = CRYSTAL_FREQ_16000000HZ,
 286         .agc_mode        = MXL_SINGLE_AGC,
 287         .tracking_filter = MXL_TF_OFF,
 288         .rssi_enable     = MXL_RSSI_ENABLE,
 289         .cap_select      = MXL_CAP_SEL_ENABLE,
 290         .div_out         = MXL_DIV_OUT_4,
 291         .clock_out       = MXL_CLOCK_OUT_DISABLE,
 292         .output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
 293         .top             = MXL5005S_TOP_25P2,
 294         .mod_mode        = MXL_DIGITAL_MODE,
 295         .if_mode         = MXL_ZERO_IF,
 296         .AgcMasterByte   = 0x00,
 297 };
 298
 299 static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
 300 {
 301         struct dvb_usb_device *d = adap_to_d(adap);
 302         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 303
 304         return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
 305                         &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
 306 }
 307
 308 static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff)
 309 {
 310         struct dvb_usb_device *d = fe_to_d(fe);
 311         struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
 312         dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
 313
 314         if (onoff)
 315                 req.index = 0x0102;
 316         return ec168_ctrl_msg(d, &req);
 317 }
 318
 319 /* DVB USB Driver stuff */
 320 /* bInterfaceNumber 0 is HID
 321  * bInterfaceNumber 1 is DVB-T */
 322 static struct dvb_usb_device_properties ec168_props = {
 323         .driver_name = KBUILD_MODNAME,
 324         .owner = THIS_MODULE,
 325         .adapter_nr = adapter_nr,
 326         .bInterfaceNumber = 1,
 327
 328         .identify_state = ec168_identify_state,
 329         .firmware = EC168_FIRMWARE,
 330         .download_firmware = ec168_download_firmware,
 331
 332         .i2c_algo = &ec168_i2c_algo,
 333         .frontend_attach = ec168_ec100_frontend_attach,
 334         .tuner_attach = ec168_mxl5003s_tuner_attach,
 335         .streaming_ctrl = ec168_streaming_ctrl,
 336
 337         .num_adapters = 1,
 338         .adapter = {
 339                 {
 340                         .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512),
 341                 }
 342         },
 343 };
 344
 345 static const struct dvb_usb_driver_info ec168_driver_info = {
 346         .name = "E3C EC168 reference design",
 347         .props = &ec168_props,
 348 };
 349
 350 static const struct usb_device_id ec168_id[] = {
 351         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
 352                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 353         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
 354                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 355         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
 356                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 357         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
 358                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 359         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
 360                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 361         {}
 362 };
 363 MODULE_DEVICE_TABLE(usb, ec168_id);
 364
 365 static struct usb_driver ec168_driver = {
 366         .name = KBUILD_MODNAME,
 367         .id_table = ec168_id,
 368         .probe = dvb_usbv2_probe,
 369         .disconnect = dvb_usbv2_disconnect,
 370         .suspend = dvb_usbv2_suspend,
 371         .resume = dvb_usbv2_resume,
 372         .no_dynamic_id = 1,
 373         .soft_unbind = 1,
 374 };
 375
 376 module_usb_driver(ec168_driver);
 377
 378 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 379 MODULE_DESCRIPTION("E3C EC168 driver");
 380 MODULE_LICENSE("GPL");
 381 /*(DEBLOBBED)*/