drivers/mmc/host/s3cmci.c

   1 /*
   2  *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
   3  *
   4  *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
   5  *
   6  * Current driver maintained by Ben Dooks and Simtec Electronics
   7  *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/dmaengine.h>
  16 #include <linux/dma-mapping.h>
  17 #include <linux/clk.h>
  18 #include <linux/mmc/host.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/cpufreq.h>
  21 #include <linux/debugfs.h>
  22 #include <linux/seq_file.h>
  23 #include <linux/gpio.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/irq.h>
  26 #include <linux/io.h>
  27
  28 #include <plat/gpio-cfg.h>
  29 #include <mach/dma.h>
  30 #include <mach/gpio-samsung.h>
  31
  32 #include <linux/platform_data/dma-s3c24xx.h>
  33 #include <linux/platform_data/mmc-s3cmci.h>
  34
  35 #include "s3cmci.h"
  36
  37 #define DRIVER_NAME "s3c-mci"
  38
  39 #define S3C2410_SDICON                  (0x00)
  40 #define S3C2410_SDIPRE                  (0x04)
  41 #define S3C2410_SDICMDARG               (0x08)
  42 #define S3C2410_SDICMDCON               (0x0C)
  43 #define S3C2410_SDICMDSTAT              (0x10)
  44 #define S3C2410_SDIRSP0                 (0x14)
  45 #define S3C2410_SDIRSP1                 (0x18)
  46 #define S3C2410_SDIRSP2                 (0x1C)
  47 #define S3C2410_SDIRSP3                 (0x20)
  48 #define S3C2410_SDITIMER                (0x24)
  49 #define S3C2410_SDIBSIZE                (0x28)
  50 #define S3C2410_SDIDCON                 (0x2C)
  51 #define S3C2410_SDIDCNT                 (0x30)
  52 #define S3C2410_SDIDSTA                 (0x34)
  53 #define S3C2410_SDIFSTA                 (0x38)
  54
  55 #define S3C2410_SDIDATA                 (0x3C)
  56 #define S3C2410_SDIIMSK                 (0x40)
  57
  58 #define S3C2440_SDIDATA                 (0x40)
  59 #define S3C2440_SDIIMSK                 (0x3C)
  60
  61 #define S3C2440_SDICON_SDRESET          (1 << 8)
  62 #define S3C2410_SDICON_SDIOIRQ          (1 << 3)
  63 #define S3C2410_SDICON_FIFORESET        (1 << 1)
  64 #define S3C2410_SDICON_CLOCKTYPE        (1 << 0)
  65
  66 #define S3C2410_SDICMDCON_LONGRSP       (1 << 10)
  67 #define S3C2410_SDICMDCON_WAITRSP       (1 << 9)
  68 #define S3C2410_SDICMDCON_CMDSTART      (1 << 8)
  69 #define S3C2410_SDICMDCON_SENDERHOST    (1 << 6)
  70 #define S3C2410_SDICMDCON_INDEX         (0x3f)
  71
  72 #define S3C2410_SDICMDSTAT_CRCFAIL      (1 << 12)
  73 #define S3C2410_SDICMDSTAT_CMDSENT      (1 << 11)
  74 #define S3C2410_SDICMDSTAT_CMDTIMEOUT   (1 << 10)
  75 #define S3C2410_SDICMDSTAT_RSPFIN       (1 << 9)
  76
  77 #define S3C2440_SDIDCON_DS_WORD         (2 << 22)
  78 #define S3C2410_SDIDCON_TXAFTERRESP     (1 << 20)
  79 #define S3C2410_SDIDCON_RXAFTERCMD      (1 << 19)
  80 #define S3C2410_SDIDCON_BLOCKMODE       (1 << 17)
  81 #define S3C2410_SDIDCON_WIDEBUS         (1 << 16)
  82 #define S3C2410_SDIDCON_DMAEN           (1 << 15)
  83 #define S3C2410_SDIDCON_STOP            (1 << 14)
  84 #define S3C2440_SDIDCON_DATSTART        (1 << 14)
  85
  86 #define S3C2410_SDIDCON_XFER_RXSTART    (2 << 12)
  87 #define S3C2410_SDIDCON_XFER_TXSTART    (3 << 12)
  88
  89 #define S3C2410_SDIDCON_BLKNUM_MASK     (0xFFF)
  90
  91 #define S3C2410_SDIDSTA_SDIOIRQDETECT   (1 << 9)
  92 #define S3C2410_SDIDSTA_FIFOFAIL        (1 << 8)
  93 #define S3C2410_SDIDSTA_CRCFAIL         (1 << 7)
  94 #define S3C2410_SDIDSTA_RXCRCFAIL       (1 << 6)
  95 #define S3C2410_SDIDSTA_DATATIMEOUT     (1 << 5)
  96 #define S3C2410_SDIDSTA_XFERFINISH      (1 << 4)
  97 #define S3C2410_SDIDSTA_TXDATAON        (1 << 1)
  98 #define S3C2410_SDIDSTA_RXDATAON        (1 << 0)
  99
 100 #define S3C2440_SDIFSTA_FIFORESET       (1 << 16)
 101 #define S3C2440_SDIFSTA_FIFOFAIL        (3 << 14)
 102 #define S3C2410_SDIFSTA_TFDET           (1 << 13)
 103 #define S3C2410_SDIFSTA_RFDET           (1 << 12)
 104 #define S3C2410_SDIFSTA_COUNTMASK       (0x7f)
 105
 106 #define S3C2410_SDIIMSK_RESPONSECRC     (1 << 17)
 107 #define S3C2410_SDIIMSK_CMDSENT         (1 << 16)
 108 #define S3C2410_SDIIMSK_CMDTIMEOUT      (1 << 15)
 109 #define S3C2410_SDIIMSK_RESPONSEND      (1 << 14)
 110 #define S3C2410_SDIIMSK_SDIOIRQ         (1 << 12)
 111 #define S3C2410_SDIIMSK_FIFOFAIL        (1 << 11)
 112 #define S3C2410_SDIIMSK_CRCSTATUS       (1 << 10)
 113 #define S3C2410_SDIIMSK_DATACRC         (1 << 9)
 114 #define S3C2410_SDIIMSK_DATATIMEOUT     (1 << 8)
 115 #define S3C2410_SDIIMSK_DATAFINISH      (1 << 7)
 116 #define S3C2410_SDIIMSK_TXFIFOHALF      (1 << 4)
 117 #define S3C2410_SDIIMSK_RXFIFOLAST      (1 << 2)
 118 #define S3C2410_SDIIMSK_RXFIFOHALF      (1 << 0)
 119
 120 enum dbg_channels {
 121         dbg_err   = (1 << 0),
 122         dbg_debug = (1 << 1),
 123         dbg_info  = (1 << 2),
 124         dbg_irq   = (1 << 3),
 125         dbg_sg    = (1 << 4),
 126         dbg_dma   = (1 << 5),
 127         dbg_pio   = (1 << 6),
 128         dbg_fail  = (1 << 7),
 129         dbg_conf  = (1 << 8),
 130 };
 131
 132 static const int dbgmap_err   = dbg_fail;
 133 static const int dbgmap_info  = dbg_info | dbg_conf;
 134 static const int dbgmap_debug = dbg_err | dbg_debug;
 135
 136 #define dbg(host, channels, args...)              \
 137         do {                                      \
 138         if (dbgmap_err & channels)                \
 139                 dev_err(&host->pdev->dev, args);  \
 140         else if (dbgmap_info & channels)          \
 141                 dev_info(&host->pdev->dev, args); \
 142         else if (dbgmap_debug & channels)         \
 143                 dev_dbg(&host->pdev->dev, args);  \
 144         } while (0)
 145
 146 static void finalize_request(struct s3cmci_host *host);
 147 static void s3cmci_send_request(struct mmc_host *mmc);
 148 static void s3cmci_reset(struct s3cmci_host *host);
 149
 150 #ifdef CONFIG_MMC_DEBUG
 151
 152 static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
 153 {
 154         u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
 155         u32 datcon, datcnt, datsta, fsta, imask;
 156
 157         con     = readl(host->base + S3C2410_SDICON);
 158         pre     = readl(host->base + S3C2410_SDIPRE);
 159         cmdarg  = readl(host->base + S3C2410_SDICMDARG);
 160         cmdcon  = readl(host->base + S3C2410_SDICMDCON);
 161         cmdsta  = readl(host->base + S3C2410_SDICMDSTAT);
 162         r0      = readl(host->base + S3C2410_SDIRSP0);
 163         r1      = readl(host->base + S3C2410_SDIRSP1);
 164         r2      = readl(host->base + S3C2410_SDIRSP2);
 165         r3      = readl(host->base + S3C2410_SDIRSP3);
 166         timer   = readl(host->base + S3C2410_SDITIMER);
 167         bsize   = readl(host->base + S3C2410_SDIBSIZE);
 168         datcon  = readl(host->base + S3C2410_SDIDCON);
 169         datcnt  = readl(host->base + S3C2410_SDIDCNT);
 170         datsta  = readl(host->base + S3C2410_SDIDSTA);
 171         fsta    = readl(host->base + S3C2410_SDIFSTA);
 172         imask   = readl(host->base + host->sdiimsk);
 173
 174         dbg(host, dbg_debug, "%s  CON:[%08x]  PRE:[%08x]  TMR:[%08x]\n",
 175                                 prefix, con, pre, timer);
 176
 177         dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
 178                                 prefix, cmdcon, cmdarg, cmdsta);
 179
 180         dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
 181                                " DSTA:[%08x] DCNT:[%08x]\n",
 182                                 prefix, datcon, fsta, datsta, datcnt);
 183
 184         dbg(host, dbg_debug, "%s   R0:[%08x]   R1:[%08x]"
 185                                "   R2:[%08x]   R3:[%08x]\n",
 186                                 prefix, r0, r1, r2, r3);
 187 }
 188
 189 static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 190                            int stop)
 191 {
 192         snprintf(host->dbgmsg_cmd, 300,
 193                  "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
 194                  host->ccnt, (stop ? " (STOP)" : ""),
 195                  cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
 196
 197         if (cmd->data) {
 198                 snprintf(host->dbgmsg_dat, 300,
 199                          "#%u bsize:%u blocks:%u bytes:%u",
 200                          host->dcnt, cmd->data->blksz,
 201                          cmd->data->blocks,
 202                          cmd->data->blocks * cmd->data->blksz);
 203         } else {
 204                 host->dbgmsg_dat[0] = '\0';
 205         }
 206 }
 207
 208 static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
 209                         int fail)
 210 {
 211         unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
 212
 213         if (!cmd)
 214                 return;
 215
 216         if (cmd->error == 0) {
 217                 dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
 218                         host->dbgmsg_cmd, cmd->resp[0]);
 219         } else {
 220                 dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
 221                         cmd->error, host->dbgmsg_cmd, host->status);
 222         }
 223
 224         if (!cmd->data)
 225                 return;
 226
 227         if (cmd->data->error == 0) {
 228                 dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
 229         } else {
 230                 dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
 231                         cmd->data->error, host->dbgmsg_dat,
 232                         readl(host->base + S3C2410_SDIDCNT));
 233         }
 234 }
 235 #else
 236 static void dbg_dumpcmd(struct s3cmci_host *host,
 237                         struct mmc_command *cmd, int fail) { }
 238
 239 static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 240                            int stop) { }
 241
 242 static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
 243
 244 #endif /* CONFIG_MMC_DEBUG */
 245
 246 /**
 247  * s3cmci_host_usedma - return whether the host is using dma or pio
 248  * @host: The host state
 249  *
 250  * Return true if the host is using DMA to transfer data, else false
 251  * to use PIO mode. Will return static data depending on the driver
 252  * configuration.
 253  */
 254 static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
 255 {
 256 #ifdef CONFIG_MMC_S3C_PIO
 257         return false;
 258 #else /* CONFIG_MMC_S3C_DMA */
 259         return true;
 260 #endif
 261 }
 262
 263 static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
 264 {
 265         u32 newmask;
 266
 267         newmask = readl(host->base + host->sdiimsk);
 268         newmask |= imask;
 269
 270         writel(newmask, host->base + host->sdiimsk);
 271
 272         return newmask;
 273 }
 274
 275 static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
 276 {
 277         u32 newmask;
 278
 279         newmask = readl(host->base + host->sdiimsk);
 280         newmask &= ~imask;
 281
 282         writel(newmask, host->base + host->sdiimsk);
 283
 284         return newmask;
 285 }
 286
 287 static inline void clear_imask(struct s3cmci_host *host)
 288 {
 289         u32 mask = readl(host->base + host->sdiimsk);
 290
 291         /* preserve the SDIO IRQ mask state */
 292         mask &= S3C2410_SDIIMSK_SDIOIRQ;
 293         writel(mask, host->base + host->sdiimsk);
 294 }
 295
 296 /**
 297  * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
 298  * @host: The host to check.
 299  *
 300  * Test to see if the SDIO interrupt is being signalled in case the
 301  * controller has failed to re-detect a card interrupt. Read GPE8 and
 302  * see if it is low and if so, signal a SDIO interrupt.
 303  *
 304  * This is currently called if a request is finished (we assume that the
 305  * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
 306  * already being indicated.
 307 */
 308 static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
 309 {
 310         if (host->sdio_irqen) {
 311                 if (gpio_get_value(S3C2410_GPE(8)) == 0) {
 312                         pr_debug("%s: signalling irq\n", __func__);
 313                         mmc_signal_sdio_irq(host->mmc);
 314                 }
 315         }
 316 }
 317
 318 static inline int get_data_buffer(struct s3cmci_host *host,
 319                                   u32 *bytes, u32 **pointer)
 320 {
 321         struct scatterlist *sg;
 322
 323         if (host->pio_active == XFER_NONE)
 324                 return -EINVAL;
 325
 326         if ((!host->mrq) || (!host->mrq->data))
 327                 return -EINVAL;
 328
 329         if (host->pio_sgptr >= host->mrq->data->sg_len) {
 330                 dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
 331                       host->pio_sgptr, host->mrq->data->sg_len);
 332                 return -EBUSY;
 333         }
 334         sg = &host->mrq->data->sg[host->pio_sgptr];
 335
 336         *bytes = sg->length;
 337         *pointer = sg_virt(sg);
 338
 339         host->pio_sgptr++;
 340
 341         dbg(host, dbg_sg, "new buffer (%i/%i)\n",
 342             host->pio_sgptr, host->mrq->data->sg_len);
 343
 344         return 0;
 345 }
 346
 347 static inline u32 fifo_count(struct s3cmci_host *host)
 348 {
 349         u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 350
 351         fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 352         return fifostat;
 353 }
 354
 355 static inline u32 fifo_free(struct s3cmci_host *host)
 356 {
 357         u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 358
 359         fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 360         return 63 - fifostat;
 361 }
 362
 363 /**
 364  * s3cmci_enable_irq - enable IRQ, after having disabled it.
 365  * @host: The device state.
 366  * @more: True if more IRQs are expected from transfer.
 367  *
 368  * Enable the main IRQ if needed after it has been disabled.
 369  *
 370  * The IRQ can be one of the following states:
 371  *      - disabled during IDLE
 372  *      - disabled whilst processing data
 373  *      - enabled during transfer
 374  *      - enabled whilst awaiting SDIO interrupt detection
 375  */
 376 static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
 377 {
 378         unsigned long flags;
 379         bool enable = false;
 380
 381         local_irq_save(flags);
 382
 383         host->irq_enabled = more;
 384         host->irq_disabled = false;
 385
 386         enable = more | host->sdio_irqen;
 387
 388         if (host->irq_state != enable) {
 389                 host->irq_state = enable;
 390
 391                 if (enable)
 392                         enable_irq(host->irq);
 393                 else
 394                         disable_irq(host->irq);
 395         }
 396
 397         local_irq_restore(flags);
 398 }
 399
 400 /**
 401  *
 402  */
 403 static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
 404 {
 405         unsigned long flags;
 406
 407         local_irq_save(flags);
 408
 409         /* pr_debug("%s: transfer %d\n", __func__, transfer); */
 410
 411         host->irq_disabled = transfer;
 412
 413         if (transfer && host->irq_state) {
 414                 host->irq_state = false;
 415                 disable_irq(host->irq);
 416         }
 417
 418         local_irq_restore(flags);
 419 }
 420
 421 static void do_pio_read(struct s3cmci_host *host)
 422 {
 423         int res;
 424         u32 fifo;
 425         u32 *ptr;
 426         u32 fifo_words;
 427         void __iomem *from_ptr;
 428
 429         /* write real prescaler to host, it might be set slow to fix */
 430         writel(host->prescaler, host->base + S3C2410_SDIPRE);
 431
 432         from_ptr = host->base + host->sdidata;
 433
 434         while ((fifo = fifo_count(host))) {
 435                 if (!host->pio_bytes) {
 436                         res = get_data_buffer(host, &host->pio_bytes,
 437                                               &host->pio_ptr);
 438                         if (res) {
 439                                 host->pio_active = XFER_NONE;
 440                                 host->complete_what = COMPLETION_FINALIZE;
 441
 442                                 dbg(host, dbg_pio, "pio_read(): "
 443                                     "complete (no more data).\n");
 444                                 return;
 445                         }
 446
 447                         dbg(host, dbg_pio,
 448                             "pio_read(): new target: [%i]@[%p]\n",
 449                             host->pio_bytes, host->pio_ptr);
 450                 }
 451
 452                 dbg(host, dbg_pio,
 453                     "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
 454                     fifo, host->pio_bytes,
 455                     readl(host->base + S3C2410_SDIDCNT));
 456
 457                 /* If we have reached the end of the block, we can
 458                  * read a word and get 1 to 3 bytes.  If we in the
 459                  * middle of the block, we have to read full words,
 460                  * otherwise we will write garbage, so round down to
 461                  * an even multiple of 4. */
 462                 if (fifo >= host->pio_bytes)
 463                         fifo = host->pio_bytes;
 464                 else
 465                         fifo -= fifo & 3;
 466
 467                 host->pio_bytes -= fifo;
 468                 host->pio_count += fifo;
 469
 470                 fifo_words = fifo >> 2;
 471                 ptr = host->pio_ptr;
 472                 while (fifo_words--)
 473                         *ptr++ = readl(from_ptr);
 474                 host->pio_ptr = ptr;
 475
 476                 if (fifo & 3) {
 477                         u32 n = fifo & 3;
 478                         u32 data = readl(from_ptr);
 479                         u8 *p = (u8 *)host->pio_ptr;
 480
 481                         while (n--) {
 482                                 *p++ = data;
 483                                 data >>= 8;
 484                         }
 485                 }
 486         }
 487
 488         if (!host->pio_bytes) {
 489                 res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
 490                 if (res) {
 491                         dbg(host, dbg_pio,
 492                             "pio_read(): complete (no more buffers).\n");
 493                         host->pio_active = XFER_NONE;
 494                         host->complete_what = COMPLETION_FINALIZE;
 495
 496                         return;
 497                 }
 498         }
 499
 500         enable_imask(host,
 501                      S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
 502 }
 503
 504 static void do_pio_write(struct s3cmci_host *host)
 505 {
 506         void __iomem *to_ptr;
 507         int res;
 508         u32 fifo;
 509         u32 *ptr;
 510
 511         to_ptr = host->base + host->sdidata;
 512
 513         while ((fifo = fifo_free(host)) > 3) {
 514                 if (!host->pio_bytes) {
 515                         res = get_data_buffer(host, &host->pio_bytes,
 516                                                         &host->pio_ptr);
 517                         if (res) {
 518                                 dbg(host, dbg_pio,
 519                                     "pio_write(): complete (no more data).\n");
 520                                 host->pio_active = XFER_NONE;
 521
 522                                 return;
 523                         }
 524
 525                         dbg(host, dbg_pio,
 526                             "pio_write(): new source: [%i]@[%p]\n",
 527                             host->pio_bytes, host->pio_ptr);
 528
 529                 }
 530
 531                 /* If we have reached the end of the block, we have to
 532                  * write exactly the remaining number of bytes.  If we
 533                  * in the middle of the block, we have to write full
 534                  * words, so round down to an even multiple of 4. */
 535                 if (fifo >= host->pio_bytes)
 536                         fifo = host->pio_bytes;
 537                 else
 538                         fifo -= fifo & 3;
 539
 540                 host->pio_bytes -= fifo;
 541                 host->pio_count += fifo;
 542
 543                 fifo = (fifo + 3) >> 2;
 544                 ptr = host->pio_ptr;
 545                 while (fifo--)
 546                         writel(*ptr++, to_ptr);
 547                 host->pio_ptr = ptr;
 548         }
 549
 550         enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 551 }
 552
 553 static void pio_tasklet(unsigned long data)
 554 {
 555         struct s3cmci_host *host = (struct s3cmci_host *) data;
 556
 557         s3cmci_disable_irq(host, true);
 558
 559         if (host->pio_active == XFER_WRITE)
 560                 do_pio_write(host);
 561
 562         if (host->pio_active == XFER_READ)
 563                 do_pio_read(host);
 564
 565         if (host->complete_what == COMPLETION_FINALIZE) {
 566                 clear_imask(host);
 567                 if (host->pio_active != XFER_NONE) {
 568                         dbg(host, dbg_err, "unfinished %s "
 569                             "- pio_count:[%u] pio_bytes:[%u]\n",
 570                             (host->pio_active == XFER_READ) ? "read" : "write",
 571                             host->pio_count, host->pio_bytes);
 572
 573                         if (host->mrq->data)
 574                                 host->mrq->data->error = -EINVAL;
 575                 }
 576
 577                 s3cmci_enable_irq(host, false);
 578                 finalize_request(host);
 579         } else
 580                 s3cmci_enable_irq(host, true);
 581 }
 582
 583 /*
 584  * ISR for SDI Interface IRQ
 585  * Communication between driver and ISR works as follows:
 586  *   host->mrq                  points to current request
 587  *   host->complete_what        Indicates when the request is considered done
 588  *     COMPLETION_CMDSENT         when the command was sent
 589  *     COMPLETION_RSPFIN          when a response was received
 590  *     COMPLETION_XFERFINISH      when the data transfer is finished
 591  *     COMPLETION_XFERFINISH_RSPFIN both of the above.
 592  *   host->complete_request     is the completion-object the driver waits for
 593  *
 594  * 1) Driver sets up host->mrq and host->complete_what
 595  * 2) Driver prepares the transfer
 596  * 3) Driver enables interrupts
 597  * 4) Driver starts transfer
 598  * 5) Driver waits for host->complete_rquest
 599  * 6) ISR checks for request status (errors and success)
 600  * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
 601  * 7) ISR completes host->complete_request
 602  * 8) ISR disables interrupts
 603  * 9) Driver wakes up and takes care of the request
 604  *
 605  * Note: "->error"-fields are expected to be set to 0 before the request
 606  *       was issued by mmc.c - therefore they are only set, when an error
 607  *       contition comes up
 608  */
 609
 610 static irqreturn_t s3cmci_irq(int irq, void *dev_id)
 611 {
 612         struct s3cmci_host *host = dev_id;
 613         struct mmc_command *cmd;
 614         u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
 615         u32 mci_cclear = 0, mci_dclear;
 616         unsigned long iflags;
 617
 618         mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 619         mci_imsk = readl(host->base + host->sdiimsk);
 620
 621         if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
 622                 if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
 623                         mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
 624                         writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 625
 626                         mmc_signal_sdio_irq(host->mmc);
 627                         return IRQ_HANDLED;
 628                 }
 629         }
 630
 631         spin_lock_irqsave(&host->complete_lock, iflags);
 632
 633         mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
 634         mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 635         mci_fsta = readl(host->base + S3C2410_SDIFSTA);
 636         mci_dclear = 0;
 637
 638         if ((host->complete_what == COMPLETION_NONE) ||
 639             (host->complete_what == COMPLETION_FINALIZE)) {
 640                 host->status = "nothing to complete";
 641                 clear_imask(host);
 642                 goto irq_out;
 643         }
 644
 645         if (!host->mrq) {
 646                 host->status = "no active mrq";
 647                 clear_imask(host);
 648                 goto irq_out;
 649         }
 650
 651         cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
 652
 653         if (!cmd) {
 654                 host->status = "no active cmd";
 655                 clear_imask(host);
 656                 goto irq_out;
 657         }
 658
 659         if (!s3cmci_host_usedma(host)) {
 660                 if ((host->pio_active == XFER_WRITE) &&
 661                     (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
 662
 663                         disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 664                         tasklet_schedule(&host->pio_tasklet);
 665                         host->status = "pio tx";
 666                 }
 667
 668                 if ((host->pio_active == XFER_READ) &&
 669                     (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
 670
 671                         disable_imask(host,
 672                                       S3C2410_SDIIMSK_RXFIFOHALF |
 673                                       S3C2410_SDIIMSK_RXFIFOLAST);
 674
 675                         tasklet_schedule(&host->pio_tasklet);
 676                         host->status = "pio rx";
 677                 }
 678         }
 679
 680         if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
 681                 dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
 682                 cmd->error = -ETIMEDOUT;
 683                 host->status = "error: command timeout";
 684                 goto fail_transfer;
 685         }
 686
 687         if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
 688                 if (host->complete_what == COMPLETION_CMDSENT) {
 689                         host->status = "ok: command sent";
 690                         goto close_transfer;
 691                 }
 692
 693                 mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
 694         }
 695
 696         if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
 697                 if (cmd->flags & MMC_RSP_CRC) {
 698                         if (host->mrq->cmd->flags & MMC_RSP_136) {
 699                                 dbg(host, dbg_irq,
 700                                     "fixup: ignore CRC fail with long rsp\n");
 701                         } else {
 702                                 /* note, we used to fail the transfer
 703                                  * here, but it seems that this is just
 704                                  * the hardware getting it wrong.
 705                                  *
 706                                  * cmd->error = -EILSEQ;
 707                                  * host->status = "error: bad command crc";
 708                                  * goto fail_transfer;
 709                                 */
 710                         }
 711                 }
 712
 713                 mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
 714         }
 715
 716         if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
 717                 if (host->complete_what == COMPLETION_RSPFIN) {
 718                         host->status = "ok: command response received";
 719                         goto close_transfer;
 720                 }
 721
 722                 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 723                         host->complete_what = COMPLETION_XFERFINISH;
 724
 725                 mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
 726         }
 727
 728         /* errors handled after this point are only relevant
 729            when a data transfer is in progress */
 730
 731         if (!cmd->data)
 732                 goto clear_status_bits;
 733
 734         /* Check for FIFO failure */
 735         if (host->is2440) {
 736                 if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
 737                         dbg(host, dbg_err, "FIFO failure\n");
 738                         host->mrq->data->error = -EILSEQ;
 739                         host->status = "error: 2440 fifo failure";
 740                         goto fail_transfer;
 741                 }
 742         } else {
 743                 if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
 744                         dbg(host, dbg_err, "FIFO failure\n");
 745                         cmd->data->error = -EILSEQ;
 746                         host->status = "error:  fifo failure";
 747                         goto fail_transfer;
 748                 }
 749         }
 750
 751         if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
 752                 dbg(host, dbg_err, "bad data crc (outgoing)\n");
 753                 cmd->data->error = -EILSEQ;
 754                 host->status = "error: bad data crc (outgoing)";
 755                 goto fail_transfer;
 756         }
 757
 758         if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
 759                 dbg(host, dbg_err, "bad data crc (incoming)\n");
 760                 cmd->data->error = -EILSEQ;
 761                 host->status = "error: bad data crc (incoming)";
 762                 goto fail_transfer;
 763         }
 764
 765         if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
 766                 dbg(host, dbg_err, "data timeout\n");
 767                 cmd->data->error = -ETIMEDOUT;
 768                 host->status = "error: data timeout";
 769                 goto fail_transfer;
 770         }
 771
 772         if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
 773                 if (host->complete_what == COMPLETION_XFERFINISH) {
 774                         host->status = "ok: data transfer completed";
 775                         goto close_transfer;
 776                 }
 777
 778                 if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 779                         host->complete_what = COMPLETION_RSPFIN;
 780
 781                 mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
 782         }
 783
 784 clear_status_bits:
 785         writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
 786         writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 787
 788         goto irq_out;
 789
 790 fail_transfer:
 791         host->pio_active = XFER_NONE;
 792
 793 close_transfer:
 794         host->complete_what = COMPLETION_FINALIZE;
 795
 796         clear_imask(host);
 797         tasklet_schedule(&host->pio_tasklet);
 798
 799         goto irq_out;
 800
 801 irq_out:
 802         dbg(host, dbg_irq,
 803             "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
 804             mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
 805
 806         spin_unlock_irqrestore(&host->complete_lock, iflags);
 807         return IRQ_HANDLED;
 808
 809 }
 810
 811 /*
 812  * ISR for the CardDetect Pin
 813 */
 814
 815 static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 816 {
 817         struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
 818
 819         dbg(host, dbg_irq, "card detect\n");
 820
 821         mmc_detect_change(host->mmc, msecs_to_jiffies(500));
 822
 823         return IRQ_HANDLED;
 824 }
 825
 826 static void s3cmci_dma_done_callback(void *arg)
 827 {
 828         struct s3cmci_host *host = arg;
 829         unsigned long iflags;
 830
 831         BUG_ON(!host->mrq);
 832         BUG_ON(!host->mrq->data);
 833
 834         spin_lock_irqsave(&host->complete_lock, iflags);
 835
 836         dbg(host, dbg_dma, "DMA FINISHED\n");
 837
 838         host->dma_complete = 1;
 839         host->complete_what = COMPLETION_FINALIZE;
 840
 841         tasklet_schedule(&host->pio_tasklet);
 842         spin_unlock_irqrestore(&host->complete_lock, iflags);
 843
 844 }
 845
 846 static void finalize_request(struct s3cmci_host *host)
 847 {
 848         struct mmc_request *mrq = host->mrq;
 849         struct mmc_command *cmd;
 850         int debug_as_failure = 0;
 851
 852         if (host->complete_what != COMPLETION_FINALIZE)
 853                 return;
 854
 855         if (!mrq)
 856                 return;
 857         cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
 858
 859         if (cmd->data && (cmd->error == 0) &&
 860             (cmd->data->error == 0)) {
 861                 if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
 862                         dbg(host, dbg_dma, "DMA Missing (%d)!\n",
 863                             host->dma_complete);
 864                         return;
 865                 }
 866         }
 867
 868         /* Read response from controller. */
 869         cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
 870         cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
 871         cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
 872         cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
 873
 874         writel(host->prescaler, host->base + S3C2410_SDIPRE);
 875
 876         if (cmd->error)
 877                 debug_as_failure = 1;
 878
 879         if (cmd->data && cmd->data->error)
 880                 debug_as_failure = 1;
 881
 882         dbg_dumpcmd(host, cmd, debug_as_failure);
 883
 884         /* Cleanup controller */
 885         writel(0, host->base + S3C2410_SDICMDARG);
 886         writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
 887         writel(0, host->base + S3C2410_SDICMDCON);
 888         clear_imask(host);
 889
 890         if (cmd->data && cmd->error)
 891                 cmd->data->error = cmd->error;
 892
 893         if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
 894                 host->cmd_is_stop = 1;
 895                 s3cmci_send_request(host->mmc);
 896                 return;
 897         }
 898
 899         /* If we have no data transfer we are finished here */
 900         if (!mrq->data)
 901                 goto request_done;
 902
 903         /* Calculate the amout of bytes transfer if there was no error */
 904         if (mrq->data->error == 0) {
 905                 mrq->data->bytes_xfered =
 906                         (mrq->data->blocks * mrq->data->blksz);
 907         } else {
 908                 mrq->data->bytes_xfered = 0;
 909         }
 910
 911         /* If we had an error while transferring data we flush the
 912          * DMA channel and the fifo to clear out any garbage. */
 913         if (mrq->data->error != 0) {
 914                 if (s3cmci_host_usedma(host))
 915                         dmaengine_terminate_all(host->dma);
 916
 917                 if (host->is2440) {
 918                         /* Clear failure register and reset fifo. */
 919                         writel(S3C2440_SDIFSTA_FIFORESET |
 920                                S3C2440_SDIFSTA_FIFOFAIL,
 921                                host->base + S3C2410_SDIFSTA);
 922                 } else {
 923                         u32 mci_con;
 924
 925                         /* reset fifo */
 926                         mci_con = readl(host->base + S3C2410_SDICON);
 927                         mci_con |= S3C2410_SDICON_FIFORESET;
 928
 929                         writel(mci_con, host->base + S3C2410_SDICON);
 930                 }
 931         }
 932
 933 request_done:
 934         host->complete_what = COMPLETION_NONE;
 935         host->mrq = NULL;
 936
 937         s3cmci_check_sdio_irq(host);
 938         mmc_request_done(host->mmc, mrq);
 939 }
 940
 941 static void s3cmci_send_command(struct s3cmci_host *host,
 942                                         struct mmc_command *cmd)
 943 {
 944         u32 ccon, imsk;
 945
 946         imsk  = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
 947                 S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
 948                 S3C2410_SDIIMSK_RESPONSECRC;
 949
 950         enable_imask(host, imsk);
 951
 952         if (cmd->data)
 953                 host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
 954         else if (cmd->flags & MMC_RSP_PRESENT)
 955                 host->complete_what = COMPLETION_RSPFIN;
 956         else
 957                 host->complete_what = COMPLETION_CMDSENT;
 958
 959         writel(cmd->arg, host->base + S3C2410_SDICMDARG);
 960
 961         ccon  = cmd->opcode & S3C2410_SDICMDCON_INDEX;
 962         ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
 963
 964         if (cmd->flags & MMC_RSP_PRESENT)
 965                 ccon |= S3C2410_SDICMDCON_WAITRSP;
 966
 967         if (cmd->flags & MMC_RSP_136)
 968                 ccon |= S3C2410_SDICMDCON_LONGRSP;
 969
 970         writel(ccon, host->base + S3C2410_SDICMDCON);
 971 }
 972
 973 static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 974 {
 975         u32 dcon, imsk, stoptries = 3;
 976
 977         /* write DCON register */
 978
 979         if (!data) {
 980                 writel(0, host->base + S3C2410_SDIDCON);
 981                 return 0;
 982         }
 983
 984         if ((data->blksz & 3) != 0) {
 985                 /* We cannot deal with unaligned blocks with more than
 986                  * one block being transferred. */
 987
 988                 if (data->blocks > 1) {
 989                         pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
 990                                 __func__, data->blksz);
 991                         return -EINVAL;
 992                 }
 993         }
 994
 995         while (readl(host->base + S3C2410_SDIDSTA) &
 996                (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
 997
 998                 dbg(host, dbg_err,
 999                     "mci_setup_data() transfer stillin progress.\n");
1000
1001                 writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
1002                 s3cmci_reset(host);
1003
1004                 if ((stoptries--) == 0) {
1005                         dbg_dumpregs(host, "DRF");
1006                         return -EINVAL;
1007                 }
1008         }
1009
1010         dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
1011
1012         if (s3cmci_host_usedma(host))
1013                 dcon |= S3C2410_SDIDCON_DMAEN;
1014
1015         if (host->bus_width == MMC_BUS_WIDTH_4)
1016                 dcon |= S3C2410_SDIDCON_WIDEBUS;
1017
1018         if (!(data->flags & MMC_DATA_STREAM))
1019                 dcon |= S3C2410_SDIDCON_BLOCKMODE;
1020
1021         if (data->flags & MMC_DATA_WRITE) {
1022                 dcon |= S3C2410_SDIDCON_TXAFTERRESP;
1023                 dcon |= S3C2410_SDIDCON_XFER_TXSTART;
1024         }
1025
1026         if (data->flags & MMC_DATA_READ) {
1027                 dcon |= S3C2410_SDIDCON_RXAFTERCMD;
1028                 dcon |= S3C2410_SDIDCON_XFER_RXSTART;
1029         }
1030
1031         if (host->is2440) {
1032                 dcon |= S3C2440_SDIDCON_DS_WORD;
1033                 dcon |= S3C2440_SDIDCON_DATSTART;
1034         }
1035
1036         writel(dcon, host->base + S3C2410_SDIDCON);
1037
1038         /* write BSIZE register */
1039
1040         writel(data->blksz, host->base + S3C2410_SDIBSIZE);
1041
1042         /* add to IMASK register */
1043         imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
1044                S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
1045
1046         enable_imask(host, imsk);
1047
1048         /* write TIMER register */
1049
1050         if (host->is2440) {
1051                 writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
1052         } else {
1053                 writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
1054
1055                 /* FIX: set slow clock to prevent timeouts on read */
1056                 if (data->flags & MMC_DATA_READ)
1057                         writel(0xFF, host->base + S3C2410_SDIPRE);
1058         }
1059
1060         return 0;
1061 }
1062
1063 #define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
1064
1065 static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
1066 {
1067         int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
1068
1069         BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1070
1071         host->pio_sgptr = 0;
1072         host->pio_bytes = 0;
1073         host->pio_count = 0;
1074         host->pio_active = rw ? XFER_WRITE : XFER_READ;
1075
1076         if (rw) {
1077                 do_pio_write(host);
1078                 enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
1079         } else {
1080                 enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
1081                              | S3C2410_SDIIMSK_RXFIFOLAST);
1082         }
1083
1084         return 0;
1085 }
1086
1087 static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
1088 {
1089         int rw = data->flags & MMC_DATA_WRITE;
1090         struct dma_async_tx_descriptor *desc;
1091         struct dma_slave_config conf = {
1092                 .src_addr = host->mem->start + host->sdidata,
1093                 .dst_addr = host->mem->start + host->sdidata,
1094                 .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1095                 .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
1096         };
1097
1098         BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1099
1100         /* Restore prescaler value */
1101         writel(host->prescaler, host->base + S3C2410_SDIPRE);
1102
1103         if (!rw)
1104                 conf.direction = DMA_DEV_TO_MEM;
1105         else
1106                 conf.direction = DMA_MEM_TO_DEV;
1107
1108         dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1109                              rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1110
1111         dmaengine_slave_config(host->dma, &conf);
1112         desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len,
1113                 conf.direction,
1114                 DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
1115         if (!desc)
1116                 goto unmap_exit;
1117         desc->callback = s3cmci_dma_done_callback;
1118         desc->callback_param = host;
1119         dmaengine_submit(desc);
1120         dma_async_issue_pending(host->dma);
1121
1122         return 0;
1123
1124 unmap_exit:
1125         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1126                              rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1127         return -ENOMEM;
1128 }
1129
1130 static void s3cmci_send_request(struct mmc_host *mmc)
1131 {
1132         struct s3cmci_host *host = mmc_priv(mmc);
1133         struct mmc_request *mrq = host->mrq;
1134         struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
1135
1136         host->ccnt++;
1137         prepare_dbgmsg(host, cmd, host->cmd_is_stop);
1138
1139         /* Clear command, data and fifo status registers
1140            Fifo clear only necessary on 2440, but doesn't hurt on 2410
1141         */
1142         writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
1143         writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
1144         writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
1145
1146         if (cmd->data) {
1147                 int res = s3cmci_setup_data(host, cmd->data);
1148
1149                 host->dcnt++;
1150
1151                 if (res) {
1152                         dbg(host, dbg_err, "setup data error %d\n", res);
1153                         cmd->error = res;
1154                         cmd->data->error = res;
1155
1156                         mmc_request_done(mmc, mrq);
1157                         return;
1158                 }
1159
1160                 if (s3cmci_host_usedma(host))
1161                         res = s3cmci_prepare_dma(host, cmd->data);
1162                 else
1163                         res = s3cmci_prepare_pio(host, cmd->data);
1164
1165                 if (res) {
1166                         dbg(host, dbg_err, "data prepare error %d\n", res);
1167                         cmd->error = res;
1168                         cmd->data->error = res;
1169
1170                         mmc_request_done(mmc, mrq);
1171                         return;
1172                 }
1173         }
1174
1175         /* Send command */
1176         s3cmci_send_command(host, cmd);
1177
1178         /* Enable Interrupt */
1179         s3cmci_enable_irq(host, true);
1180 }
1181
1182 static int s3cmci_card_present(struct mmc_host *mmc)
1183 {
1184         struct s3cmci_host *host = mmc_priv(mmc);
1185         struct s3c24xx_mci_pdata *pdata = host->pdata;
1186         int ret;
1187
1188         if (pdata->no_detect)
1189                 return -ENOSYS;
1190
1191         ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
1192         return ret ^ pdata->detect_invert;
1193 }
1194
1195 static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1196 {
1197         struct s3cmci_host *host = mmc_priv(mmc);
1198
1199         host->status = "mmc request";
1200         host->cmd_is_stop = 0;
1201         host->mrq = mrq;
1202
1203         if (s3cmci_card_present(mmc) == 0) {
1204                 dbg(host, dbg_err, "%s: no medium present\n", __func__);
1205                 host->mrq->cmd->error = -ENOMEDIUM;
1206                 mmc_request_done(mmc, mrq);
1207         } else
1208                 s3cmci_send_request(mmc);
1209 }
1210
1211 static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
1212 {
1213         u32 mci_psc;
1214
1215         /* Set clock */
1216         for (mci_psc = 0; mci_psc < 255; mci_psc++) {
1217                 host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
1218
1219                 if (host->real_rate <= ios->clock)
1220                         break;
1221         }
1222
1223         if (mci_psc > 255)
1224                 mci_psc = 255;
1225
1226         host->prescaler = mci_psc;
1227         writel(host->prescaler, host->base + S3C2410_SDIPRE);
1228
1229         /* If requested clock is 0, real_rate will be 0, too */
1230         if (ios->clock == 0)
1231                 host->real_rate = 0;
1232 }
1233
1234 static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1235 {
1236         struct s3cmci_host *host = mmc_priv(mmc);
1237         u32 mci_con;
1238
1239         /* Set the power state */
1240
1241         mci_con = readl(host->base + S3C2410_SDICON);
1242
1243         switch (ios->power_mode) {
1244         case MMC_POWER_ON:
1245         case MMC_POWER_UP:
1246                 /* Configure GPE5...GPE10 pins in SD mode */
1247                 s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
1248                                       S3C_GPIO_PULL_NONE);
1249
1250                 if (host->pdata->set_power)
1251                         host->pdata->set_power(ios->power_mode, ios->vdd);
1252
1253                 if (!host->is2440)
1254                         mci_con |= S3C2410_SDICON_FIFORESET;
1255
1256                 break;
1257
1258         case MMC_POWER_OFF:
1259         default:
1260                 gpio_direction_output(S3C2410_GPE(5), 0);
1261
1262                 if (host->is2440)
1263                         mci_con |= S3C2440_SDICON_SDRESET;
1264
1265                 if (host->pdata->set_power)
1266                         host->pdata->set_power(ios->power_mode, ios->vdd);
1267
1268                 break;
1269         }
1270
1271         s3cmci_set_clk(host, ios);
1272
1273         /* Set CLOCK_ENABLE */
1274         if (ios->clock)
1275                 mci_con |= S3C2410_SDICON_CLOCKTYPE;
1276         else
1277                 mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
1278
1279         writel(mci_con, host->base + S3C2410_SDICON);
1280
1281         if ((ios->power_mode == MMC_POWER_ON) ||
1282             (ios->power_mode == MMC_POWER_UP)) {
1283                 dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
1284                         host->real_rate/1000, ios->clock/1000);
1285         } else {
1286                 dbg(host, dbg_conf, "powered down.\n");
1287         }
1288
1289         host->bus_width = ios->bus_width;
1290 }
1291
1292 static void s3cmci_reset(struct s3cmci_host *host)
1293 {
1294         u32 con = readl(host->base + S3C2410_SDICON);
1295
1296         con |= S3C2440_SDICON_SDRESET;
1297         writel(con, host->base + S3C2410_SDICON);
1298 }
1299
1300 static int s3cmci_get_ro(struct mmc_host *mmc)
1301 {
1302         struct s3cmci_host *host = mmc_priv(mmc);
1303         struct s3c24xx_mci_pdata *pdata = host->pdata;
1304         int ret;
1305
1306         if (pdata->no_wprotect)
1307                 return 0;
1308
1309         ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
1310         ret ^= pdata->wprotect_invert;
1311
1312         return ret;
1313 }
1314
1315 static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1316 {
1317         struct s3cmci_host *host = mmc_priv(mmc);
1318         unsigned long flags;
1319         u32 con;
1320
1321         local_irq_save(flags);
1322
1323         con = readl(host->base + S3C2410_SDICON);
1324         host->sdio_irqen = enable;
1325
1326         if (enable == host->sdio_irqen)
1327                 goto same_state;
1328
1329         if (enable) {
1330                 con |= S3C2410_SDICON_SDIOIRQ;
1331                 enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1332
1333                 if (!host->irq_state && !host->irq_disabled) {
1334                         host->irq_state = true;
1335                         enable_irq(host->irq);
1336                 }
1337         } else {
1338                 disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1339                 con &= ~S3C2410_SDICON_SDIOIRQ;
1340
1341                 if (!host->irq_enabled && host->irq_state) {
1342                         disable_irq_nosync(host->irq);
1343                         host->irq_state = false;
1344                 }
1345         }
1346
1347         writel(con, host->base + S3C2410_SDICON);
1348
1349  same_state:
1350         local_irq_restore(flags);
1351
1352         s3cmci_check_sdio_irq(host);
1353 }
1354
1355 static struct mmc_host_ops s3cmci_ops = {
1356         .request        = s3cmci_request,
1357         .set_ios        = s3cmci_set_ios,
1358         .get_ro         = s3cmci_get_ro,
1359         .get_cd         = s3cmci_card_present,
1360         .enable_sdio_irq = s3cmci_enable_sdio_irq,
1361 };
1362
1363 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
1364         /* This is currently here to avoid a number of if (host->pdata)
1365          * checks. Any zero fields to ensure reasonable defaults are picked. */
1366          .no_wprotect = 1,
1367          .no_detect = 1,
1368 };
1369
1370 #ifdef CONFIG_CPU_FREQ
1371
1372 static int s3cmci_cpufreq_transition(struct notifier_block *nb,
1373                                      unsigned long val, void *data)
1374 {
1375         struct s3cmci_host *host;
1376         struct mmc_host *mmc;
1377         unsigned long newclk;
1378         unsigned long flags;
1379
1380         host = container_of(nb, struct s3cmci_host, freq_transition);
1381         newclk = clk_get_rate(host->clk);
1382         mmc = host->mmc;
1383
1384         if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
1385             (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
1386                 spin_lock_irqsave(&mmc->lock, flags);
1387
1388                 host->clk_rate = newclk;
1389
1390                 if (mmc->ios.power_mode != MMC_POWER_OFF &&
1391                     mmc->ios.clock != 0)
1392                         s3cmci_set_clk(host, &mmc->ios);
1393
1394                 spin_unlock_irqrestore(&mmc->lock, flags);
1395         }
1396
1397         return 0;
1398 }
1399
1400 static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1401 {
1402         host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
1403
1404         return cpufreq_register_notifier(&host->freq_transition,
1405                                          CPUFREQ_TRANSITION_NOTIFIER);
1406 }
1407
1408 static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1409 {
1410         cpufreq_unregister_notifier(&host->freq_transition,
1411                                     CPUFREQ_TRANSITION_NOTIFIER);
1412 }
1413
1414 #else
1415 static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1416 {
1417         return 0;
1418 }
1419
1420 static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1421 {
1422 }
1423 #endif
1424
1425
1426 #ifdef CONFIG_DEBUG_FS
1427
1428 static int s3cmci_state_show(struct seq_file *seq, void *v)
1429 {
1430         struct s3cmci_host *host = seq->private;
1431
1432         seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
1433         seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
1434         seq_printf(seq, "Prescale = %d\n", host->prescaler);
1435         seq_printf(seq, "is2440 = %d\n", host->is2440);
1436         seq_printf(seq, "IRQ = %d\n", host->irq);
1437         seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
1438         seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
1439         seq_printf(seq, "IRQ state = %d\n", host->irq_state);
1440         seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
1441         seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
1442         seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
1443         seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
1444
1445         return 0;
1446 }
1447
1448 static int s3cmci_state_open(struct inode *inode, struct file *file)
1449 {
1450         return single_open(file, s3cmci_state_show, inode->i_private);
1451 }
1452
1453 static const struct file_operations s3cmci_fops_state = {
1454         .owner          = THIS_MODULE,
1455         .open           = s3cmci_state_open,
1456         .read           = seq_read,
1457         .llseek         = seq_lseek,
1458         .release        = single_release,
1459 };
1460
1461 #define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
1462
1463 struct s3cmci_reg {
1464         unsigned short  addr;
1465         unsigned char   *name;
1466 } debug_regs[] = {
1467         DBG_REG(CON),
1468         DBG_REG(PRE),
1469         DBG_REG(CMDARG),
1470         DBG_REG(CMDCON),
1471         DBG_REG(CMDSTAT),
1472         DBG_REG(RSP0),
1473         DBG_REG(RSP1),
1474         DBG_REG(RSP2),
1475         DBG_REG(RSP3),
1476         DBG_REG(TIMER),
1477         DBG_REG(BSIZE),
1478         DBG_REG(DCON),
1479         DBG_REG(DCNT),
1480         DBG_REG(DSTA),
1481         DBG_REG(FSTA),
1482         {}
1483 };
1484
1485 static int s3cmci_regs_show(struct seq_file *seq, void *v)
1486 {
1487         struct s3cmci_host *host = seq->private;
1488         struct s3cmci_reg *rptr = debug_regs;
1489
1490         for (; rptr->name; rptr++)
1491                 seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
1492                            readl(host->base + rptr->addr));
1493
1494         seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
1495
1496         return 0;
1497 }
1498
1499 static int s3cmci_regs_open(struct inode *inode, struct file *file)
1500 {
1501         return single_open(file, s3cmci_regs_show, inode->i_private);
1502 }
1503
1504 static const struct file_operations s3cmci_fops_regs = {
1505         .owner          = THIS_MODULE,
1506         .open           = s3cmci_regs_open,
1507         .read           = seq_read,
1508         .llseek         = seq_lseek,
1509         .release        = single_release,
1510 };
1511
1512 static void s3cmci_debugfs_attach(struct s3cmci_host *host)
1513 {
1514         struct device *dev = &host->pdev->dev;
1515
1516         host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
1517         if (IS_ERR(host->debug_root)) {
1518                 dev_err(dev, "failed to create debugfs root\n");
1519                 return;
1520         }
1521
1522         host->debug_state = debugfs_create_file("state", 0444,
1523                                                 host->debug_root, host,
1524                                                 &s3cmci_fops_state);
1525
1526         if (IS_ERR(host->debug_state))
1527                 dev_err(dev, "failed to create debug state file\n");
1528
1529         host->debug_regs = debugfs_create_file("regs", 0444,
1530                                                host->debug_root, host,
1531                                                &s3cmci_fops_regs);
1532
1533         if (IS_ERR(host->debug_regs))
1534                 dev_err(dev, "failed to create debug regs file\n");
1535 }
1536
1537 static void s3cmci_debugfs_remove(struct s3cmci_host *host)
1538 {
1539         debugfs_remove(host->debug_regs);
1540         debugfs_remove(host->debug_state);
1541         debugfs_remove(host->debug_root);
1542 }
1543
1544 #else
1545 static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
1546 static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
1547
1548 #endif /* CONFIG_DEBUG_FS */
1549
1550 static int s3cmci_probe(struct platform_device *pdev)
1551 {
1552         struct s3cmci_host *host;
1553         struct mmc_host *mmc;
1554         int ret;
1555         int is2440;
1556         int i;
1557
1558         is2440 = platform_get_device_id(pdev)->driver_data;
1559
1560         mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
1561         if (!mmc) {
1562                 ret = -ENOMEM;
1563                 goto probe_out;
1564         }
1565
1566         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
1567                 ret = gpio_request(i, dev_name(&pdev->dev));
1568                 if (ret) {
1569                         dev_err(&pdev->dev, "failed to get gpio %d\n", i);
1570
1571                         for (i--; i >= S3C2410_GPE(5); i--)
1572                                 gpio_free(i);
1573
1574                         goto probe_free_host;
1575                 }
1576         }
1577
1578         host = mmc_priv(mmc);
1579         host->mmc       = mmc;
1580         host->pdev      = pdev;
1581         host->is2440    = is2440;
1582
1583         host->pdata = pdev->dev.platform_data;
1584         if (!host->pdata) {
1585                 pdev->dev.platform_data = &s3cmci_def_pdata;
1586                 host->pdata = &s3cmci_def_pdata;
1587         }
1588
1589         spin_lock_init(&host->complete_lock);
1590         tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
1591
1592         if (is2440) {
1593                 host->sdiimsk   = S3C2440_SDIIMSK;
1594                 host->sdidata   = S3C2440_SDIDATA;
1595                 host->clk_div   = 1;
1596         } else {
1597                 host->sdiimsk   = S3C2410_SDIIMSK;
1598                 host->sdidata   = S3C2410_SDIDATA;
1599                 host->clk_div   = 2;
1600         }
1601
1602         host->complete_what     = COMPLETION_NONE;
1603         host->pio_active        = XFER_NONE;
1604
1605         host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1606         if (!host->mem) {
1607                 dev_err(&pdev->dev,
1608                         "failed to get io memory region resource.\n");
1609
1610                 ret = -ENOENT;
1611                 goto probe_free_gpio;
1612         }
1613
1614         host->mem = request_mem_region(host->mem->start,
1615                                        resource_size(host->mem), pdev->name);
1616
1617         if (!host->mem) {
1618                 dev_err(&pdev->dev, "failed to request io memory region.\n");
1619                 ret = -ENOENT;
1620                 goto probe_free_gpio;
1621         }
1622
1623         host->base = ioremap(host->mem->start, resource_size(host->mem));
1624         if (!host->base) {
1625                 dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
1626                 ret = -EINVAL;
1627                 goto probe_free_mem_region;
1628         }
1629
1630         host->irq = platform_get_irq(pdev, 0);
1631         if (host->irq == 0) {
1632                 dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1633                 ret = -EINVAL;
1634                 goto probe_iounmap;
1635         }
1636
1637         if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
1638                 dev_err(&pdev->dev, "failed to request mci interrupt.\n");
1639                 ret = -ENOENT;
1640                 goto probe_iounmap;
1641         }
1642
1643         /* We get spurious interrupts even when we have set the IMSK
1644          * register to ignore everything, so use disable_irq() to make
1645          * ensure we don't lock the system with un-serviceable requests. */
1646
1647         disable_irq(host->irq);
1648         host->irq_state = false;
1649
1650         if (!host->pdata->no_detect) {
1651                 ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
1652                 if (ret) {
1653                         dev_err(&pdev->dev, "failed to get detect gpio\n");
1654                         goto probe_free_irq;
1655                 }
1656
1657                 host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
1658
1659                 if (host->irq_cd >= 0) {
1660                         if (request_irq(host->irq_cd, s3cmci_irq_cd,
1661                                         IRQF_TRIGGER_RISING |
1662                                         IRQF_TRIGGER_FALLING,
1663                                         DRIVER_NAME, host)) {
1664                                 dev_err(&pdev->dev,
1665                                         "can't get card detect irq.\n");
1666                                 ret = -ENOENT;
1667                                 goto probe_free_gpio_cd;
1668                         }
1669                 } else {
1670                         dev_warn(&pdev->dev,
1671                                  "host detect has no irq available\n");
1672                         gpio_direction_input(host->pdata->gpio_detect);
1673                 }
1674         } else
1675                 host->irq_cd = -1;
1676
1677         if (!host->pdata->no_wprotect) {
1678                 ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
1679                 if (ret) {
1680                         dev_err(&pdev->dev, "failed to get writeprotect\n");
1681                         goto probe_free_irq_cd;
1682                 }
1683
1684                 gpio_direction_input(host->pdata->gpio_wprotect);
1685         }
1686
1687         /* depending on the dma state, get a dma channel to use. */
1688
1689         if (s3cmci_host_usedma(host)) {
1690                 dma_cap_mask_t mask;
1691
1692                 dma_cap_zero(mask);
1693                 dma_cap_set(DMA_SLAVE, mask);
1694
1695                 host->dma = dma_request_slave_channel_compat(mask,
1696                         s3c24xx_dma_filter, (void *)DMACH_SDI, &pdev->dev, "rx-tx");
1697                 if (!host->dma) {
1698                         dev_err(&pdev->dev, "cannot get DMA channel.\n");
1699                         ret = -EBUSY;
1700                         goto probe_free_gpio_wp;
1701                 }
1702         }
1703
1704         host->clk = clk_get(&pdev->dev, "sdi");
1705         if (IS_ERR(host->clk)) {
1706                 dev_err(&pdev->dev, "failed to find clock source.\n");
1707                 ret = PTR_ERR(host->clk);
1708                 host->clk = NULL;
1709                 goto probe_free_dma;
1710         }
1711
1712         ret = clk_prepare_enable(host->clk);
1713         if (ret) {
1714                 dev_err(&pdev->dev, "failed to enable clock source.\n");
1715                 goto clk_free;
1716         }
1717
1718         host->clk_rate = clk_get_rate(host->clk);
1719
1720         mmc->ops        = &s3cmci_ops;
1721         mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
1722 #ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
1723         mmc->caps       = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1724 #else
1725         mmc->caps       = MMC_CAP_4_BIT_DATA;
1726 #endif
1727         mmc->f_min      = host->clk_rate / (host->clk_div * 256);
1728         mmc->f_max      = host->clk_rate / host->clk_div;
1729
1730         if (host->pdata->ocr_avail)
1731                 mmc->ocr_avail = host->pdata->ocr_avail;
1732
1733         mmc->max_blk_count      = 4095;
1734         mmc->max_blk_size       = 4095;
1735         mmc->max_req_size       = 4095 * 512;
1736         mmc->max_seg_size       = mmc->max_req_size;
1737
1738         mmc->max_segs           = 128;
1739
1740         dbg(host, dbg_debug,
1741             "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n",
1742             (host->is2440?"2440":""),
1743             host->base, host->irq, host->irq_cd, host->dma);
1744
1745         ret = s3cmci_cpufreq_register(host);
1746         if (ret) {
1747                 dev_err(&pdev->dev, "failed to register cpufreq\n");
1748                 goto free_dmabuf;
1749         }
1750
1751         ret = mmc_add_host(mmc);
1752         if (ret) {
1753                 dev_err(&pdev->dev, "failed to add mmc host.\n");
1754                 goto free_cpufreq;
1755         }
1756
1757         s3cmci_debugfs_attach(host);
1758
1759         platform_set_drvdata(pdev, mmc);
1760         dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
1761                  s3cmci_host_usedma(host) ? "dma" : "pio",
1762                  mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
1763
1764         return 0;
1765
1766  free_cpufreq:
1767         s3cmci_cpufreq_deregister(host);
1768
1769  free_dmabuf:
1770         clk_disable_unprepare(host->clk);
1771
1772  clk_free:
1773         clk_put(host->clk);
1774
1775  probe_free_dma:
1776         if (s3cmci_host_usedma(host))
1777                 dma_release_channel(host->dma);
1778
1779  probe_free_gpio_wp:
1780         if (!host->pdata->no_wprotect)
1781                 gpio_free(host->pdata->gpio_wprotect);
1782
1783  probe_free_gpio_cd:
1784         if (!host->pdata->no_detect)
1785                 gpio_free(host->pdata->gpio_detect);
1786
1787  probe_free_irq_cd:
1788         if (host->irq_cd >= 0)
1789                 free_irq(host->irq_cd, host);
1790
1791  probe_free_irq:
1792         free_irq(host->irq, host);
1793
1794  probe_iounmap:
1795         iounmap(host->base);
1796
1797  probe_free_mem_region:
1798         release_mem_region(host->mem->start, resource_size(host->mem));
1799
1800  probe_free_gpio:
1801         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1802                 gpio_free(i);
1803
1804  probe_free_host:
1805         mmc_free_host(mmc);
1806
1807  probe_out:
1808         return ret;
1809 }
1810
1811 static void s3cmci_shutdown(struct platform_device *pdev)
1812 {
1813         struct mmc_host *mmc = platform_get_drvdata(pdev);
1814         struct s3cmci_host *host = mmc_priv(mmc);
1815
1816         if (host->irq_cd >= 0)
1817                 free_irq(host->irq_cd, host);
1818
1819         s3cmci_debugfs_remove(host);
1820         s3cmci_cpufreq_deregister(host);
1821         mmc_remove_host(mmc);
1822         clk_disable_unprepare(host->clk);
1823 }
1824
1825 static int s3cmci_remove(struct platform_device *pdev)
1826 {
1827         struct mmc_host         *mmc  = platform_get_drvdata(pdev);
1828         struct s3cmci_host      *host = mmc_priv(mmc);
1829         struct s3c24xx_mci_pdata *pd = host->pdata;
1830         int i;
1831
1832         s3cmci_shutdown(pdev);
1833
1834         clk_put(host->clk);
1835
1836         tasklet_disable(&host->pio_tasklet);
1837
1838         if (s3cmci_host_usedma(host))
1839                 dma_release_channel(host->dma);
1840
1841         free_irq(host->irq, host);
1842
1843         if (!pd->no_wprotect)
1844                 gpio_free(pd->gpio_wprotect);
1845
1846         if (!pd->no_detect)
1847                 gpio_free(pd->gpio_detect);
1848
1849         for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1850                 gpio_free(i);
1851
1852
1853         iounmap(host->base);
1854         release_mem_region(host->mem->start, resource_size(host->mem));
1855
1856         mmc_free_host(mmc);
1857         return 0;
1858 }
1859
1860 static const struct platform_device_id s3cmci_driver_ids[] = {
1861         {
1862                 .name   = "s3c2410-sdi",
1863                 .driver_data    = 0,
1864         }, {
1865                 .name   = "s3c2412-sdi",
1866                 .driver_data    = 1,
1867         }, {
1868                 .name   = "s3c2440-sdi",
1869                 .driver_data    = 1,
1870         },
1871         { }
1872 };
1873
1874 MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
1875
1876 static struct platform_driver s3cmci_driver = {
1877         .driver = {
1878                 .name   = "s3c-sdi",
1879         },
1880         .id_table       = s3cmci_driver_ids,
1881         .probe          = s3cmci_probe,
1882         .remove         = s3cmci_remove,
1883         .shutdown       = s3cmci_shutdown,
1884 };
1885
1886 module_platform_driver(s3cmci_driver);
1887
1888 MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
1889 MODULE_LICENSE("GPL v2");
1890 MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");