GNU Linux-libre 4.19.286-gnu1
[releases.git] / drivers / net / dsa / b53 / b53_regs.h
1 /*
2  * B53 register definitions
3  *
4  * Copyright (C) 2004 Broadcom Corporation
5  * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19
20 #ifndef __B53_REGS_H
21 #define __B53_REGS_H
22
23 /* Management Port (SMP) Page offsets */
24 #define B53_CTRL_PAGE                   0x00 /* Control */
25 #define B53_STAT_PAGE                   0x01 /* Status */
26 #define B53_MGMT_PAGE                   0x02 /* Management Mode */
27 #define B53_MIB_AC_PAGE                 0x03 /* MIB Autocast */
28 #define B53_ARLCTRL_PAGE                0x04 /* ARL Control */
29 #define B53_ARLIO_PAGE                  0x05 /* ARL Access */
30 #define B53_FRAMEBUF_PAGE               0x06 /* Management frame access */
31 #define B53_MEM_ACCESS_PAGE             0x08 /* Memory access */
32
33 /* PHY Registers */
34 #define B53_PORT_MII_PAGE(i)            (0x10 + (i)) /* Port i MII Registers */
35 #define B53_IM_PORT_PAGE                0x18 /* Inverse MII Port (to EMAC) */
36 #define B53_ALL_PORT_PAGE               0x19 /* All ports MII (broadcast) */
37
38 /* MIB registers */
39 #define B53_MIB_PAGE(i)                 (0x20 + (i))
40
41 /* Quality of Service (QoS) Registers */
42 #define B53_QOS_PAGE                    0x30
43
44 /* Port VLAN Page */
45 #define B53_PVLAN_PAGE                  0x31
46
47 /* VLAN Registers */
48 #define B53_VLAN_PAGE                   0x34
49
50 /* Jumbo Frame Registers */
51 #define B53_JUMBO_PAGE                  0x40
52
53 /* EEE Control Registers Page */
54 #define B53_EEE_PAGE                    0x92
55
56 /* CFP Configuration Registers Page */
57 #define B53_CFP_PAGE                    0xa1
58
59 /*************************************************************************
60  * Control Page registers
61  *************************************************************************/
62
63 /* Port Control Register (8 bit) */
64 #define B53_PORT_CTRL(i)                (0x00 + (i))
65 #define   PORT_CTRL_RX_DISABLE          BIT(0)
66 #define   PORT_CTRL_TX_DISABLE          BIT(1)
67 #define   PORT_CTRL_RX_BCST_EN          BIT(2) /* Broadcast RX (P8 only) */
68 #define   PORT_CTRL_RX_MCST_EN          BIT(3) /* Multicast RX (P8 only) */
69 #define   PORT_CTRL_RX_UCST_EN          BIT(4) /* Unicast RX (P8 only) */
70 #define   PORT_CTRL_STP_STATE_S         5
71 #define   PORT_CTRL_NO_STP              (0 << PORT_CTRL_STP_STATE_S)
72 #define   PORT_CTRL_DIS_STATE           (1 << PORT_CTRL_STP_STATE_S)
73 #define   PORT_CTRL_BLOCK_STATE         (2 << PORT_CTRL_STP_STATE_S)
74 #define   PORT_CTRL_LISTEN_STATE        (3 << PORT_CTRL_STP_STATE_S)
75 #define   PORT_CTRL_LEARN_STATE         (4 << PORT_CTRL_STP_STATE_S)
76 #define   PORT_CTRL_FWD_STATE           (5 << PORT_CTRL_STP_STATE_S)
77 #define   PORT_CTRL_STP_STATE_MASK      (0x7 << PORT_CTRL_STP_STATE_S)
78
79 /* SMP Control Register (8 bit) */
80 #define B53_SMP_CTRL                    0x0a
81
82 /* Switch Mode Control Register (8 bit) */
83 #define B53_SWITCH_MODE                 0x0b
84 #define   SM_SW_FWD_MODE                BIT(0)  /* 1 = Managed Mode */
85 #define   SM_SW_FWD_EN                  BIT(1)  /* Forwarding Enable */
86
87 /* IMP Port state override register (8 bit) */
88 #define B53_PORT_OVERRIDE_CTRL          0x0e
89 #define   PORT_OVERRIDE_LINK            BIT(0)
90 #define   PORT_OVERRIDE_FULL_DUPLEX     BIT(1) /* 0 = Half Duplex */
91 #define   PORT_OVERRIDE_SPEED_S         2
92 #define   PORT_OVERRIDE_SPEED_10M       (0 << PORT_OVERRIDE_SPEED_S)
93 #define   PORT_OVERRIDE_SPEED_100M      (1 << PORT_OVERRIDE_SPEED_S)
94 #define   PORT_OVERRIDE_SPEED_1000M     (2 << PORT_OVERRIDE_SPEED_S)
95 #define   PORT_OVERRIDE_RV_MII_25       BIT(4) /* BCM5325 only */
96 #define   PORT_OVERRIDE_RX_FLOW         BIT(4)
97 #define   PORT_OVERRIDE_TX_FLOW         BIT(5)
98 #define   PORT_OVERRIDE_SPEED_2000M     BIT(6) /* BCM5301X only, requires setting 1000M */
99 #define   PORT_OVERRIDE_EN              BIT(7) /* Use the register contents */
100
101 /* Power-down mode control */
102 #define B53_PD_MODE_CTRL_25             0x0f
103
104 /* IP Multicast control (8 bit) */
105 #define B53_IP_MULTICAST_CTRL           0x21
106 #define  B53_IPMC_FWD_EN                BIT(1)
107 #define  B53_UC_FWD_EN                  BIT(6)
108 #define  B53_MC_FWD_EN                  BIT(7)
109
110 /* Switch control (8 bit) */
111 #define B53_SWITCH_CTRL                 0x22
112 #define  B53_MII_DUMB_FWDG_EN           BIT(6)
113
114 /* (16 bit) */
115 #define B53_UC_FLOOD_MASK               0x32
116 #define B53_MC_FLOOD_MASK               0x34
117 #define B53_IPMC_FLOOD_MASK             0x36
118 #define B53_DIS_LEARNING                0x3c
119
120 /*
121  * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
122  *
123  * For port 8 still use B53_PORT_OVERRIDE_CTRL
124  * Please note that not all ports are available on every hardware, e.g. BCM5301X
125  * don't include overriding port 6, BCM63xx also have some limitations.
126  */
127 #define B53_GMII_PORT_OVERRIDE_CTRL(i)  (0x58 + (i))
128 #define   GMII_PO_LINK                  BIT(0)
129 #define   GMII_PO_FULL_DUPLEX           BIT(1) /* 0 = Half Duplex */
130 #define   GMII_PO_SPEED_S               2
131 #define   GMII_PO_SPEED_10M             (0 << GMII_PO_SPEED_S)
132 #define   GMII_PO_SPEED_100M            (1 << GMII_PO_SPEED_S)
133 #define   GMII_PO_SPEED_1000M           (2 << GMII_PO_SPEED_S)
134 #define   GMII_PO_RX_FLOW               BIT(4)
135 #define   GMII_PO_TX_FLOW               BIT(5)
136 #define   GMII_PO_EN                    BIT(6) /* Use the register contents */
137 #define   GMII_PO_SPEED_2000M           BIT(7) /* BCM5301X only, requires setting 1000M */
138
139 #define B53_RGMII_CTRL_IMP              0x60
140 #define   RGMII_CTRL_ENABLE_GMII        BIT(7)
141 #define   RGMII_CTRL_TIMING_SEL         BIT(2)
142 #define   RGMII_CTRL_DLL_RXC            BIT(1)
143 #define   RGMII_CTRL_DLL_TXC            BIT(0)
144
145 #define B53_RGMII_CTRL_P(i)             (B53_RGMII_CTRL_IMP + (i))
146
147 /* Software reset register (8 bit) */
148 #define B53_SOFTRESET                   0x79
149 #define   SW_RST                        BIT(7)
150 #define   EN_CH_RST                     BIT(6)
151 #define   EN_SW_RST                     BIT(4)
152
153 /* Fast Aging Control register (8 bit) */
154 #define B53_FAST_AGE_CTRL               0x88
155 #define   FAST_AGE_STATIC               BIT(0)
156 #define   FAST_AGE_DYNAMIC              BIT(1)
157 #define   FAST_AGE_PORT                 BIT(2)
158 #define   FAST_AGE_VLAN                 BIT(3)
159 #define   FAST_AGE_STP                  BIT(4)
160 #define   FAST_AGE_MC                   BIT(5)
161 #define   FAST_AGE_DONE                 BIT(7)
162
163 /* Fast Aging Port Control register (8 bit) */
164 #define B53_FAST_AGE_PORT_CTRL          0x89
165
166 /* Fast Aging VID Control register (16 bit) */
167 #define B53_FAST_AGE_VID_CTRL           0x8a
168
169 /*************************************************************************
170  * Status Page registers
171  *************************************************************************/
172
173 /* Link Status Summary Register (16bit) */
174 #define B53_LINK_STAT                   0x00
175
176 /* Link Status Change Register (16 bit) */
177 #define B53_LINK_STAT_CHANGE            0x02
178
179 /* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
180 #define B53_SPEED_STAT                  0x04
181 #define  SPEED_PORT_FE(reg, port)       (((reg) >> (port)) & 1)
182 #define  SPEED_PORT_GE(reg, port)       (((reg) >> 2 * (port)) & 3)
183 #define  SPEED_STAT_10M                 0
184 #define  SPEED_STAT_100M                1
185 #define  SPEED_STAT_1000M               2
186
187 /* Duplex Status Summary (16 bit) */
188 #define B53_DUPLEX_STAT_FE              0x06
189 #define B53_DUPLEX_STAT_GE              0x08
190 #define B53_DUPLEX_STAT_63XX            0x0c
191
192 /* Revision ID register for BCM5325 */
193 #define B53_REV_ID_25                   0x50
194
195 /* Strap Value (48 bit) */
196 #define B53_STRAP_VALUE                 0x70
197 #define   SV_GMII_CTRL_115              BIT(27)
198
199 /*************************************************************************
200  * Management Mode Page Registers
201  *************************************************************************/
202
203 /* Global Management Config Register (8 bit) */
204 #define B53_GLOBAL_CONFIG               0x00
205 #define   GC_RESET_MIB                  0x01
206 #define   GC_RX_BPDU_EN                 0x02
207 #define   GC_MIB_AC_HDR_EN              0x10
208 #define   GC_MIB_AC_EN                  0x20
209 #define   GC_FRM_MGMT_PORT_M            0xC0
210 #define   GC_FRM_MGMT_PORT_04           0x00
211 #define   GC_FRM_MGMT_PORT_MII          0x80
212
213 /* Broadcom Header control register (8 bit) */
214 #define B53_BRCM_HDR                    0x03
215 #define   BRCM_HDR_P8_EN                BIT(0) /* Enable tagging on port 8 */
216 #define   BRCM_HDR_P5_EN                BIT(1) /* Enable tagging on port 5 */
217 #define   BRCM_HDR_P7_EN                BIT(2) /* Enable tagging on port 7 */
218
219 /* Mirror capture control register (16 bit) */
220 #define B53_MIR_CAP_CTL                 0x10
221 #define  CAP_PORT_MASK                  0xf
222 #define  BLK_NOT_MIR                    BIT(14)
223 #define  MIRROR_EN                      BIT(15)
224
225 /* Ingress mirror control register (16 bit) */
226 #define B53_IG_MIR_CTL                  0x12
227 #define  MIRROR_MASK                    0x1ff
228 #define  DIV_EN                         BIT(13)
229 #define  MIRROR_FILTER_MASK             0x3
230 #define  MIRROR_FILTER_SHIFT            14
231 #define  MIRROR_ALL                     0
232 #define  MIRROR_DA                      1
233 #define  MIRROR_SA                      2
234
235 /* Ingress mirror divider register (16 bit) */
236 #define B53_IG_MIR_DIV                  0x14
237 #define  IN_MIRROR_DIV_MASK             0x3ff
238
239 /* Ingress mirror MAC address register (48 bit) */
240 #define B53_IG_MIR_MAC                  0x16
241
242 /* Egress mirror control register (16 bit) */
243 #define B53_EG_MIR_CTL                  0x1C
244
245 /* Egress mirror divider register (16 bit) */
246 #define B53_EG_MIR_DIV                  0x1E
247
248 /* Egress mirror MAC address register (48 bit) */
249 #define B53_EG_MIR_MAC                  0x20
250
251 /* Device ID register (8 or 32 bit) */
252 #define B53_DEVICE_ID                   0x30
253
254 /* Revision ID register (8 bit) */
255 #define B53_REV_ID                      0x40
256
257 /* Broadcom header RX control (16 bit) */
258 #define B53_BRCM_HDR_RX_DIS             0x60
259
260 /* Broadcom header TX control (16 bit)  */
261 #define B53_BRCM_HDR_TX_DIS             0x62
262
263 /*************************************************************************
264  * ARL Access Page Registers
265  *************************************************************************/
266
267 /* VLAN Table Access Register (8 bit) */
268 #define B53_VT_ACCESS                   0x80
269 #define B53_VT_ACCESS_9798              0x60 /* for BCM5397/BCM5398 */
270 #define B53_VT_ACCESS_63XX              0x60 /* for BCM6328/62/68 */
271 #define   VTA_CMD_WRITE                 0
272 #define   VTA_CMD_READ                  1
273 #define   VTA_CMD_CLEAR                 2
274 #define   VTA_START_CMD                 BIT(7)
275
276 /* VLAN Table Index Register (16 bit) */
277 #define B53_VT_INDEX                    0x81
278 #define B53_VT_INDEX_9798               0x61
279 #define B53_VT_INDEX_63XX               0x62
280
281 /* VLAN Table Entry Register (32 bit) */
282 #define B53_VT_ENTRY                    0x83
283 #define B53_VT_ENTRY_9798               0x63
284 #define B53_VT_ENTRY_63XX               0x64
285 #define   VTE_MEMBERS                   0x1ff
286 #define   VTE_UNTAG_S                   9
287 #define   VTE_UNTAG                     (0x1ff << 9)
288
289 /*************************************************************************
290  * ARL I/O Registers
291  *************************************************************************/
292
293 /* ARL Table Read/Write Register (8 bit) */
294 #define B53_ARLTBL_RW_CTRL              0x00
295 #define    ARLTBL_RW                    BIT(0)
296 #define    ARLTBL_IVL_SVL_SELECT        BIT(6)
297 #define    ARLTBL_START_DONE            BIT(7)
298
299 /* MAC Address Index Register (48 bit) */
300 #define B53_MAC_ADDR_IDX                0x02
301
302 /* VLAN ID Index Register (16 bit) */
303 #define B53_VLAN_ID_IDX                 0x08
304
305 /* ARL Table MAC/VID Entry N Registers (64 bit)
306  *
307  * BCM5325 and BCM5365 share most definitions below
308  */
309 #define B53_ARLTBL_MAC_VID_ENTRY(n)     ((0x10 * (n)) + 0x10)
310 #define   ARLTBL_MAC_MASK               0xffffffffffffULL
311 #define   ARLTBL_VID_S                  48
312 #define   ARLTBL_VID_MASK_25            0xff
313 #define   ARLTBL_VID_MASK               0xfff
314 #define   ARLTBL_DATA_PORT_ID_S_25      48
315 #define   ARLTBL_DATA_PORT_ID_MASK_25   0xf
316 #define   ARLTBL_AGE_25                 BIT(61)
317 #define   ARLTBL_STATIC_25              BIT(62)
318 #define   ARLTBL_VALID_25               BIT(63)
319
320 /* ARL Table Data Entry N Registers (32 bit) */
321 #define B53_ARLTBL_DATA_ENTRY(n)        ((0x10 * (n)) + 0x18)
322 #define   ARLTBL_DATA_PORT_ID_MASK      0x1ff
323 #define   ARLTBL_TC(tc)                 ((3 & tc) << 11)
324 #define   ARLTBL_AGE                    BIT(14)
325 #define   ARLTBL_STATIC                 BIT(15)
326 #define   ARLTBL_VALID                  BIT(16)
327
328 /* Maximum number of bin entries in the ARL for all switches */
329 #define B53_ARLTBL_MAX_BIN_ENTRIES      4
330
331 /* ARL Search Control Register (8 bit) */
332 #define B53_ARL_SRCH_CTL                0x50
333 #define B53_ARL_SRCH_CTL_25             0x20
334 #define   ARL_SRCH_VLID                 BIT(0)
335 #define   ARL_SRCH_STDN                 BIT(7)
336
337 /* ARL Search Address Register (16 bit) */
338 #define B53_ARL_SRCH_ADDR               0x51
339 #define B53_ARL_SRCH_ADDR_25            0x22
340 #define B53_ARL_SRCH_ADDR_65            0x24
341 #define  ARL_ADDR_MASK                  GENMASK(14, 0)
342
343 /* ARL Search MAC/VID Result (64 bit) */
344 #define B53_ARL_SRCH_RSTL_0_MACVID      0x60
345
346 /* Single register search result on 5325 */
347 #define B53_ARL_SRCH_RSTL_0_MACVID_25   0x24
348 /* Single register search result on 5365 */
349 #define B53_ARL_SRCH_RSTL_0_MACVID_65   0x30
350
351 /* ARL Search Data Result (32 bit) */
352 #define B53_ARL_SRCH_RSTL_0             0x68
353
354 #define B53_ARL_SRCH_RSTL_MACVID(x)     (B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10))
355 #define B53_ARL_SRCH_RSTL(x)            (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10))
356
357 /*************************************************************************
358  * Port VLAN Registers
359  *************************************************************************/
360
361 /* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
362 #define B53_PVLAN_PORT_MASK(i)          ((i) * 2)
363
364 /* Join all VLANs register (16 bit) */
365 #define B53_JOIN_ALL_VLAN_EN            0x50
366
367 /*************************************************************************
368  * 802.1Q Page Registers
369  *************************************************************************/
370
371 /* Global QoS Control (8 bit) */
372 #define B53_QOS_GLOBAL_CTL              0x00
373
374 /* Enable 802.1Q for individual Ports (16 bit) */
375 #define B53_802_1P_EN                   0x04
376
377 /*************************************************************************
378  * VLAN Page Registers
379  *************************************************************************/
380
381 /* VLAN Control 0 (8 bit) */
382 #define B53_VLAN_CTRL0                  0x00
383 #define   VC0_8021PF_CTRL_MASK          0x3
384 #define   VC0_8021PF_CTRL_NONE          0x0
385 #define   VC0_8021PF_CTRL_CHANGE_PRI    0x1
386 #define   VC0_8021PF_CTRL_CHANGE_VID    0x2
387 #define   VC0_8021PF_CTRL_CHANGE_BOTH   0x3
388 #define   VC0_8021QF_CTRL_MASK          0xc
389 #define   VC0_8021QF_CTRL_CHANGE_PRI    0x1
390 #define   VC0_8021QF_CTRL_CHANGE_VID    0x2
391 #define   VC0_8021QF_CTRL_CHANGE_BOTH   0x3
392 #define   VC0_RESERVED_1                BIT(1)
393 #define   VC0_DROP_VID_MISS             BIT(4)
394 #define   VC0_VID_HASH_VID              BIT(5)
395 #define   VC0_VID_CHK_EN                BIT(6)  /* Use VID,DA or VID,SA */
396 #define   VC0_VLAN_EN                   BIT(7)  /* 802.1Q VLAN Enabled */
397
398 /* VLAN Control 1 (8 bit) */
399 #define B53_VLAN_CTRL1                  0x01
400 #define   VC1_RX_MCST_TAG_EN            BIT(1)
401 #define   VC1_RX_MCST_FWD_EN            BIT(2)
402 #define   VC1_RX_MCST_UNTAG_EN          BIT(3)
403
404 /* VLAN Control 2 (8 bit) */
405 #define B53_VLAN_CTRL2                  0x02
406
407 /* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
408 #define B53_VLAN_CTRL3                  0x03
409 #define B53_VLAN_CTRL3_63XX             0x04
410 #define   VC3_MAXSIZE_1532              BIT(6) /* 5325 only */
411 #define   VC3_HIGH_8BIT_EN              BIT(7) /* 5325 only */
412
413 /* VLAN Control 4 (8 bit) */
414 #define B53_VLAN_CTRL4                  0x05
415 #define B53_VLAN_CTRL4_25               0x04
416 #define B53_VLAN_CTRL4_63XX             0x06
417 #define   VC4_ING_VID_CHECK_S           6
418 #define   VC4_ING_VID_CHECK_MASK        (0x3 << VC4_ING_VID_CHECK_S)
419 #define   VC4_ING_VID_VIO_FWD           0 /* forward, but do not learn */
420 #define   VC4_ING_VID_VIO_DROP          1 /* drop VID violations */
421 #define   VC4_NO_ING_VID_CHK            2 /* do not check */
422 #define   VC4_ING_VID_VIO_TO_IMP        3 /* redirect to MII port */
423
424 /* VLAN Control 5 (8 bit) */
425 #define B53_VLAN_CTRL5                  0x06
426 #define B53_VLAN_CTRL5_25               0x05
427 #define B53_VLAN_CTRL5_63XX             0x07
428 #define   VC5_VID_FFF_EN                BIT(2)
429 #define   VC5_DROP_VTABLE_MISS          BIT(3)
430
431 /* VLAN Control 6 (8 bit) */
432 #define B53_VLAN_CTRL6                  0x07
433 #define B53_VLAN_CTRL6_63XX             0x08
434
435 /* VLAN Table Access Register (16 bit) */
436 #define B53_VLAN_TABLE_ACCESS_25        0x06    /* BCM5325E/5350 */
437 #define B53_VLAN_TABLE_ACCESS_65        0x08    /* BCM5365 */
438 #define   VTA_VID_LOW_MASK_25           0xf
439 #define   VTA_VID_LOW_MASK_65           0xff
440 #define   VTA_VID_HIGH_S_25             4
441 #define   VTA_VID_HIGH_S_65             8
442 #define   VTA_VID_HIGH_MASK_25          (0xff << VTA_VID_HIGH_S_25E)
443 #define   VTA_VID_HIGH_MASK_65          (0xf << VTA_VID_HIGH_S_65)
444 #define   VTA_RW_STATE                  BIT(12)
445 #define   VTA_RW_STATE_RD               0
446 #define   VTA_RW_STATE_WR               BIT(12)
447 #define   VTA_RW_OP_EN                  BIT(13)
448
449 /* VLAN Read/Write Registers for (16/32 bit) */
450 #define B53_VLAN_WRITE_25               0x08
451 #define B53_VLAN_WRITE_65               0x0a
452 #define B53_VLAN_READ                   0x0c
453 #define   VA_MEMBER_MASK                0x3f
454 #define   VA_UNTAG_S_25                 6
455 #define   VA_UNTAG_MASK_25              0x3f
456 #define   VA_UNTAG_S_65                 7
457 #define   VA_UNTAG_MASK_65              0x1f
458 #define   VA_VID_HIGH_S                 12
459 #define   VA_VID_HIGH_MASK              (0xffff << VA_VID_HIGH_S)
460 #define   VA_VALID_25                   BIT(20)
461 #define   VA_VALID_25_R4                BIT(24)
462 #define   VA_VALID_65                   BIT(14)
463
464 /* VLAN Port Default Tag (16 bit) */
465 #define B53_VLAN_PORT_DEF_TAG(i)        (0x10 + 2 * (i))
466
467 /*************************************************************************
468  * Jumbo Frame Page Registers
469  *************************************************************************/
470
471 /* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
472 #define B53_JUMBO_PORT_MASK             0x01
473 #define B53_JUMBO_PORT_MASK_63XX        0x04
474 #define   JPM_10_100_JUMBO_EN           BIT(24) /* GigE always enabled */
475
476 /* Good Frame Max Size without 802.1Q TAG (16 bit) */
477 #define B53_JUMBO_MAX_SIZE              0x05
478 #define B53_JUMBO_MAX_SIZE_63XX         0x08
479 #define   JMS_MIN_SIZE                  1518
480 #define   JMS_MAX_SIZE                  9724
481
482 /*************************************************************************
483  * EEE Configuration Page Registers
484  *************************************************************************/
485
486 /* EEE Enable control register (16 bit) */
487 #define B53_EEE_EN_CTRL                 0x00
488
489 /* EEE LPI assert status register (16 bit) */
490 #define B53_EEE_LPI_ASSERT_STS          0x02
491
492 /* EEE LPI indicate status register (16 bit) */
493 #define B53_EEE_LPI_INDICATE            0x4
494
495 /* EEE Receiving idle symbols status register (16 bit) */
496 #define B53_EEE_RX_IDLE_SYM_STS         0x6
497
498 /* EEE Pipeline timer register (32 bit) */
499 #define B53_EEE_PIP_TIMER               0xC
500
501 /* EEE Sleep timer Gig register (32 bit) */
502 #define B53_EEE_SLEEP_TIMER_GIG(i)      (0x10 + 4 * (i))
503
504 /* EEE Sleep timer FE register (32 bit) */
505 #define B53_EEE_SLEEP_TIMER_FE(i)       (0x34 + 4 * (i))
506
507 /* EEE Minimum LP timer Gig register (32 bit) */
508 #define B53_EEE_MIN_LP_TIMER_GIG(i)     (0x58 + 4 * (i))
509
510 /* EEE Minimum LP timer FE register (32 bit) */
511 #define B53_EEE_MIN_LP_TIMER_FE(i)      (0x7c + 4 * (i))
512
513 /* EEE Wake timer Gig register (16 bit) */
514 #define B53_EEE_WAKE_TIMER_GIG(i)       (0xa0 + 2 * (i))
515
516 /* EEE Wake timer FE register (16 bit) */
517 #define B53_EEE_WAKE_TIMER_FE(i)        (0xb2 + 2 * (i))
518
519
520 /*************************************************************************
521  * CFP Configuration Page Registers
522  *************************************************************************/
523
524 /* CFP Control Register with ports map (8 bit) */
525 #define B53_CFP_CTRL                    0x00
526
527 #endif /* !__B53_REGS_H */