GNU Linux-libre 4.19.286-gnu1
[releases.git] / drivers / net / ethernet / 8390 / etherh.c
1 /*
2  *  linux/drivers/acorn/net/etherh.c
3  *
4  *  Copyright (C) 2000-2002 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  *
10  * NS8390 I-cubed EtherH and ANT EtherM specific driver
11  * Thanks to I-Cubed for information on their cards.
12  * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
13  * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
14  * EtherM integration re-engineered by Russell King.
15  *
16  * Changelog:
17  *  08-12-1996  RMK     1.00    Created
18  *              RMK     1.03    Added support for EtherLan500 cards
19  *  23-11-1997  RMK     1.04    Added media autodetection
20  *  16-04-1998  RMK     1.05    Improved media autodetection
21  *  10-02-2000  RMK     1.06    Updated for 2.3.43
22  *  13-05-2000  RMK     1.07    Updated for 2.3.99-pre8
23  *  12-10-1999  CK/TEW          EtherM driver first release
24  *  21-12-2000  TTC             EtherH/EtherM integration
25  *  25-12-2000  RMK     1.08    Clean integration of EtherM into this driver.
26  *  03-01-2002  RMK     1.09    Always enable IRQs if we're in the nic slot.
27  */
28
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/types.h>
32 #include <linux/fcntl.h>
33 #include <linux/interrupt.h>
34 #include <linux/ioport.h>
35 #include <linux/in.h>
36 #include <linux/string.h>
37 #include <linux/errno.h>
38 #include <linux/netdevice.h>
39 #include <linux/etherdevice.h>
40 #include <linux/ethtool.h>
41 #include <linux/skbuff.h>
42 #include <linux/delay.h>
43 #include <linux/device.h>
44 #include <linux/init.h>
45 #include <linux/bitops.h>
46 #include <linux/jiffies.h>
47
48 #include <asm/ecard.h>
49 #include <asm/io.h>
50 #include <asm/system_info.h>
51
52 #define EI_SHIFT(x)     (ei_local->reg_offset[x])
53
54 #define ei_inb(_p)       readb((void __iomem *)_p)
55 #define ei_outb(_v,_p)   writeb(_v,(void __iomem *)_p)
56 #define ei_inb_p(_p)     readb((void __iomem *)_p)
57 #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p)
58
59 #define DRV_NAME        "etherh"
60 #define DRV_VERSION     "1.11"
61
62 static char version[] =
63         "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
64
65 #include "lib8390.c"
66
67 struct etherh_priv {
68         void __iomem    *ioc_fast;
69         void __iomem    *memc;
70         void __iomem    *dma_base;
71         unsigned int    id;
72         void __iomem    *ctrl_port;
73         unsigned char   ctrl;
74         u32             supported;
75 };
76
77 struct etherh_data {
78         unsigned long   ns8390_offset;
79         unsigned long   dataport_offset;
80         unsigned long   ctrlport_offset;
81         int             ctrl_ioc;
82         const char      name[16];
83         u32             supported;
84         unsigned char   tx_start_page;
85         unsigned char   stop_page;
86 };
87
88 MODULE_AUTHOR("Russell King");
89 MODULE_DESCRIPTION("EtherH/EtherM driver");
90 MODULE_LICENSE("GPL");
91
92 #define ETHERH500_DATAPORT      0x800   /* MEMC */
93 #define ETHERH500_NS8390        0x000   /* MEMC */
94 #define ETHERH500_CTRLPORT      0x800   /* IOC  */
95
96 #define ETHERH600_DATAPORT      0x040   /* MEMC */
97 #define ETHERH600_NS8390        0x800   /* MEMC */
98 #define ETHERH600_CTRLPORT      0x200   /* MEMC */
99
100 #define ETHERH_CP_IE            1
101 #define ETHERH_CP_IF            2
102 #define ETHERH_CP_HEARTBEAT     2
103
104 #define ETHERH_TX_START_PAGE    1
105 #define ETHERH_STOP_PAGE        127
106
107 /*
108  * These came from CK/TEW
109  */
110 #define ETHERM_DATAPORT         0x200   /* MEMC */
111 #define ETHERM_NS8390           0x800   /* MEMC */
112 #define ETHERM_CTRLPORT         0x23c   /* MEMC */
113
114 #define ETHERM_TX_START_PAGE    64
115 #define ETHERM_STOP_PAGE        127
116
117 /* ------------------------------------------------------------------------ */
118
119 #define etherh_priv(dev) \
120  ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))
121
122 static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
123 {
124         unsigned char ctrl = eh->ctrl | mask;
125         eh->ctrl = ctrl;
126         writeb(ctrl, eh->ctrl_port);
127 }
128
129 static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
130 {
131         unsigned char ctrl = eh->ctrl & ~mask;
132         eh->ctrl = ctrl;
133         writeb(ctrl, eh->ctrl_port);
134 }
135
136 static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
137 {
138         return readb(eh->ctrl_port);
139 }
140
141
142
143
144 static void etherh_irq_enable(ecard_t *ec, int irqnr)
145 {
146         struct etherh_priv *eh = ec->irq_data;
147
148         etherh_set_ctrl(eh, ETHERH_CP_IE);
149 }
150
151 static void etherh_irq_disable(ecard_t *ec, int irqnr)
152 {
153         struct etherh_priv *eh = ec->irq_data;
154
155         etherh_clr_ctrl(eh, ETHERH_CP_IE);
156 }
157
158 static expansioncard_ops_t etherh_ops = {
159         .irqenable      = etherh_irq_enable,
160         .irqdisable     = etherh_irq_disable,
161 };
162
163
164
165
166 static void
167 etherh_setif(struct net_device *dev)
168 {
169         struct ei_device *ei_local = netdev_priv(dev);
170         unsigned long flags;
171         void __iomem *addr;
172
173         local_irq_save(flags);
174
175         /* set the interface type */
176         switch (etherh_priv(dev)->id) {
177         case PROD_I3_ETHERLAN600:
178         case PROD_I3_ETHERLAN600A:
179                 addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
180
181                 switch (dev->if_port) {
182                 case IF_PORT_10BASE2:
183                         writeb((readb(addr) & 0xf8) | 1, addr);
184                         break;
185                 case IF_PORT_10BASET:
186                         writeb((readb(addr) & 0xf8), addr);
187                         break;
188                 }
189                 break;
190
191         case PROD_I3_ETHERLAN500:
192                 switch (dev->if_port) {
193                 case IF_PORT_10BASE2:
194                         etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
195                         break;
196
197                 case IF_PORT_10BASET:
198                         etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
199                         break;
200                 }
201                 break;
202
203         default:
204                 break;
205         }
206
207         local_irq_restore(flags);
208 }
209
210 static int
211 etherh_getifstat(struct net_device *dev)
212 {
213         struct ei_device *ei_local = netdev_priv(dev);
214         void __iomem *addr;
215         int stat = 0;
216
217         switch (etherh_priv(dev)->id) {
218         case PROD_I3_ETHERLAN600:
219         case PROD_I3_ETHERLAN600A:
220                 addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
221                 switch (dev->if_port) {
222                 case IF_PORT_10BASE2:
223                         stat = 1;
224                         break;
225                 case IF_PORT_10BASET:
226                         stat = readb(addr) & 4;
227                         break;
228                 }
229                 break;
230
231         case PROD_I3_ETHERLAN500:
232                 switch (dev->if_port) {
233                 case IF_PORT_10BASE2:
234                         stat = 1;
235                         break;
236                 case IF_PORT_10BASET:
237                         stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
238                         break;
239                 }
240                 break;
241
242         default:
243                 stat = 0;
244                 break;
245         }
246
247         return stat != 0;
248 }
249
250 /*
251  * Configure the interface.  Note that we ignore the other
252  * parts of ifmap, since its mostly meaningless for this driver.
253  */
254 static int etherh_set_config(struct net_device *dev, struct ifmap *map)
255 {
256         switch (map->port) {
257         case IF_PORT_10BASE2:
258         case IF_PORT_10BASET:
259                 /*
260                  * If the user explicitly sets the interface
261                  * media type, turn off automedia detection.
262                  */
263                 dev->flags &= ~IFF_AUTOMEDIA;
264                 dev->if_port = map->port;
265                 break;
266
267         default:
268                 return -EINVAL;
269         }
270
271         etherh_setif(dev);
272
273         return 0;
274 }
275
276 /*
277  * Reset the 8390 (hard reset).  Note that we can't actually do this.
278  */
279 static void
280 etherh_reset(struct net_device *dev)
281 {
282         struct ei_device *ei_local = netdev_priv(dev);
283         void __iomem *addr = (void __iomem *)dev->base_addr;
284
285         writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
286
287         /*
288          * See if we need to change the interface type.
289          * Note that we use 'interface_num' as a flag
290          * to indicate that we need to change the media.
291          */
292         if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
293                 ei_local->interface_num = 0;
294
295                 if (dev->if_port == IF_PORT_10BASET)
296                         dev->if_port = IF_PORT_10BASE2;
297                 else
298                         dev->if_port = IF_PORT_10BASET;
299
300                 etherh_setif(dev);
301         }
302 }
303
304 /*
305  * Write a block of data out to the 8390
306  */
307 static void
308 etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
309 {
310         struct ei_device *ei_local = netdev_priv(dev);
311         unsigned long dma_start;
312         void __iomem *dma_base, *addr;
313
314         if (ei_local->dmaing) {
315                 netdev_err(dev, "DMAing conflict in etherh_block_input: "
316                            " DMAstat %d irqlock %d\n",
317                            ei_local->dmaing, ei_local->irqlock);
318                 return;
319         }
320
321         /*
322          * Make sure we have a round number of bytes if we're in word mode.
323          */
324         if (count & 1 && ei_local->word16)
325                 count++;
326
327         ei_local->dmaing = 1;
328
329         addr = (void __iomem *)dev->base_addr;
330         dma_base = etherh_priv(dev)->dma_base;
331
332         count = (count + 1) & ~1;
333         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
334
335         writeb (0x42, addr + EN0_RCNTLO);
336         writeb (0x00, addr + EN0_RCNTHI);
337         writeb (0x42, addr + EN0_RSARLO);
338         writeb (0x00, addr + EN0_RSARHI);
339         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
340
341         udelay (1);
342
343         writeb (ENISR_RDC, addr + EN0_ISR);
344         writeb (count, addr + EN0_RCNTLO);
345         writeb (count >> 8, addr + EN0_RCNTHI);
346         writeb (0, addr + EN0_RSARLO);
347         writeb (start_page, addr + EN0_RSARHI);
348         writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
349
350         if (ei_local->word16)
351                 writesw (dma_base, buf, count >> 1);
352         else
353                 writesb (dma_base, buf, count);
354
355         dma_start = jiffies;
356
357         while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
358                 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
359                         netdev_warn(dev, "timeout waiting for TX RDC\n");
360                         etherh_reset (dev);
361                         __NS8390_init (dev, 1);
362                         break;
363                 }
364
365         writeb (ENISR_RDC, addr + EN0_ISR);
366         ei_local->dmaing = 0;
367 }
368
369 /*
370  * Read a block of data from the 8390
371  */
372 static void
373 etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
374 {
375         struct ei_device *ei_local = netdev_priv(dev);
376         unsigned char *buf;
377         void __iomem *dma_base, *addr;
378
379         if (ei_local->dmaing) {
380                 netdev_err(dev, "DMAing conflict in etherh_block_input: "
381                            " DMAstat %d irqlock %d\n",
382                            ei_local->dmaing, ei_local->irqlock);
383                 return;
384         }
385
386         ei_local->dmaing = 1;
387
388         addr = (void __iomem *)dev->base_addr;
389         dma_base = etherh_priv(dev)->dma_base;
390
391         buf = skb->data;
392         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
393         writeb (count, addr + EN0_RCNTLO);
394         writeb (count >> 8, addr + EN0_RCNTHI);
395         writeb (ring_offset, addr + EN0_RSARLO);
396         writeb (ring_offset >> 8, addr + EN0_RSARHI);
397         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
398
399         if (ei_local->word16) {
400                 readsw (dma_base, buf, count >> 1);
401                 if (count & 1)
402                         buf[count - 1] = readb (dma_base);
403         } else
404                 readsb (dma_base, buf, count);
405
406         writeb (ENISR_RDC, addr + EN0_ISR);
407         ei_local->dmaing = 0;
408 }
409
410 /*
411  * Read a header from the 8390
412  */
413 static void
414 etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
415 {
416         struct ei_device *ei_local = netdev_priv(dev);
417         void __iomem *dma_base, *addr;
418
419         if (ei_local->dmaing) {
420                 netdev_err(dev, "DMAing conflict in etherh_get_header: "
421                            " DMAstat %d irqlock %d\n",
422                            ei_local->dmaing, ei_local->irqlock);
423                 return;
424         }
425
426         ei_local->dmaing = 1;
427
428         addr = (void __iomem *)dev->base_addr;
429         dma_base = etherh_priv(dev)->dma_base;
430
431         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
432         writeb (sizeof (*hdr), addr + EN0_RCNTLO);
433         writeb (0, addr + EN0_RCNTHI);
434         writeb (0, addr + EN0_RSARLO);
435         writeb (ring_page, addr + EN0_RSARHI);
436         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
437
438         if (ei_local->word16)
439                 readsw (dma_base, hdr, sizeof (*hdr) >> 1);
440         else
441                 readsb (dma_base, hdr, sizeof (*hdr));
442
443         writeb (ENISR_RDC, addr + EN0_ISR);
444         ei_local->dmaing = 0;
445 }
446
447 /*
448  * Open/initialize the board.  This is called (in the current kernel)
449  * sometime after booting when the 'ifconfig' program is run.
450  *
451  * This routine should set everything up anew at each open, even
452  * registers that "should" only need to be set once at boot, so that
453  * there is non-reboot way to recover if something goes wrong.
454  */
455 static int
456 etherh_open(struct net_device *dev)
457 {
458         struct ei_device *ei_local = netdev_priv(dev);
459
460         if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev))
461                 return -EAGAIN;
462
463         /*
464          * Make sure that we aren't going to change the
465          * media type on the next reset - we are about to
466          * do automedia manually now.
467          */
468         ei_local->interface_num = 0;
469
470         /*
471          * If we are doing automedia detection, do it now.
472          * This is more reliable than the 8390's detection.
473          */
474         if (dev->flags & IFF_AUTOMEDIA) {
475                 dev->if_port = IF_PORT_10BASET;
476                 etherh_setif(dev);
477                 mdelay(1);
478                 if (!etherh_getifstat(dev)) {
479                         dev->if_port = IF_PORT_10BASE2;
480                         etherh_setif(dev);
481                 }
482         } else
483                 etherh_setif(dev);
484
485         etherh_reset(dev);
486         __ei_open(dev);
487
488         return 0;
489 }
490
491 /*
492  * The inverse routine to etherh_open().
493  */
494 static int
495 etherh_close(struct net_device *dev)
496 {
497         __ei_close (dev);
498         free_irq (dev->irq, dev);
499         return 0;
500 }
501
502 /*
503  * Read the ethernet address string from the on board rom.
504  * This is an ascii string...
505  */
506 static int etherh_addr(char *addr, struct expansion_card *ec)
507 {
508         struct in_chunk_dir cd;
509         char *s;
510         
511         if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
512                 printk(KERN_ERR "%s: unable to read module description string\n",
513                        dev_name(&ec->dev));
514                 goto no_addr;
515         }
516
517         s = strchr(cd.d.string, '(');
518         if (s) {
519                 int i;
520
521                 for (i = 0; i < 6; i++) {
522                         addr[i] = simple_strtoul(s + 1, &s, 0x10);
523                         if (*s != (i == 5? ')' : ':'))
524                                 break;
525                 }
526
527                 if (i == 6)
528                         return 0;
529         }
530
531         printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
532                dev_name(&ec->dev), cd.d.string);
533
534  no_addr:
535         return -ENODEV;
536 }
537
538 /*
539  * Create an ethernet address from the system serial number.
540  */
541 static int __init etherm_addr(char *addr)
542 {
543         unsigned int serial;
544
545         if (system_serial_low == 0 && system_serial_high == 0)
546                 return -ENODEV;
547
548         serial = system_serial_low | system_serial_high;
549
550         addr[0] = 0;
551         addr[1] = 0;
552         addr[2] = 0xa4;
553         addr[3] = 0x10 + (serial >> 24);
554         addr[4] = serial >> 16;
555         addr[5] = serial >> 8;
556         return 0;
557 }
558
559 static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
560 {
561         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
562         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
563         strlcpy(info->bus_info, dev_name(dev->dev.parent),
564                 sizeof(info->bus_info));
565 }
566
567 static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
568 {
569         cmd->supported  = etherh_priv(dev)->supported;
570         ethtool_cmd_speed_set(cmd, SPEED_10);
571         cmd->duplex     = DUPLEX_HALF;
572         cmd->port       = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
573         cmd->autoneg    = (dev->flags & IFF_AUTOMEDIA ?
574                            AUTONEG_ENABLE : AUTONEG_DISABLE);
575         return 0;
576 }
577
578 static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
579 {
580         switch (cmd->autoneg) {
581         case AUTONEG_ENABLE:
582                 dev->flags |= IFF_AUTOMEDIA;
583                 break;
584
585         case AUTONEG_DISABLE:
586                 switch (cmd->port) {
587                 case PORT_TP:
588                         dev->if_port = IF_PORT_10BASET;
589                         break;
590
591                 case PORT_BNC:
592                         dev->if_port = IF_PORT_10BASE2;
593                         break;
594
595                 default:
596                         return -EINVAL;
597                 }
598                 dev->flags &= ~IFF_AUTOMEDIA;
599                 break;
600
601         default:
602                 return -EINVAL;
603         }
604
605         etherh_setif(dev);
606
607         return 0;
608 }
609
610 static u32 etherh_get_msglevel(struct net_device *dev)
611 {
612         struct ei_device *ei_local = netdev_priv(dev);
613
614         return ei_local->msg_enable;
615 }
616
617 static void etherh_set_msglevel(struct net_device *dev, u32 v)
618 {
619         struct ei_device *ei_local = netdev_priv(dev);
620
621         ei_local->msg_enable = v;
622 }
623
624 static const struct ethtool_ops etherh_ethtool_ops = {
625         .get_settings   = etherh_get_settings,
626         .set_settings   = etherh_set_settings,
627         .get_drvinfo    = etherh_get_drvinfo,
628         .get_ts_info    = ethtool_op_get_ts_info,
629         .get_msglevel   = etherh_get_msglevel,
630         .set_msglevel   = etherh_set_msglevel,
631 };
632
633 static const struct net_device_ops etherh_netdev_ops = {
634         .ndo_open               = etherh_open,
635         .ndo_stop               = etherh_close,
636         .ndo_set_config         = etherh_set_config,
637         .ndo_start_xmit         = __ei_start_xmit,
638         .ndo_tx_timeout         = __ei_tx_timeout,
639         .ndo_get_stats          = __ei_get_stats,
640         .ndo_set_rx_mode        = __ei_set_multicast_list,
641         .ndo_validate_addr      = eth_validate_addr,
642         .ndo_set_mac_address    = eth_mac_addr,
643 #ifdef CONFIG_NET_POLL_CONTROLLER
644         .ndo_poll_controller    = __ei_poll,
645 #endif
646 };
647
648 static u32 etherh_regoffsets[16];
649 static u32 etherm_regoffsets[16];
650
651 static int
652 etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
653 {
654         const struct etherh_data *data = id->data;
655         struct ei_device *ei_local;
656         struct net_device *dev;
657         struct etherh_priv *eh;
658         int ret;
659
660         ret = ecard_request_resources(ec);
661         if (ret)
662                 goto out;
663
664         dev = ____alloc_ei_netdev(sizeof(struct etherh_priv));
665         if (!dev) {
666                 ret = -ENOMEM;
667                 goto release;
668         }
669
670         SET_NETDEV_DEV(dev, &ec->dev);
671
672         dev->netdev_ops         = &etherh_netdev_ops;
673         dev->irq                = ec->irq;
674         dev->ethtool_ops        = &etherh_ethtool_ops;
675
676         if (data->supported & SUPPORTED_Autoneg)
677                 dev->flags |= IFF_AUTOMEDIA;
678         if (data->supported & SUPPORTED_TP) {
679                 dev->flags |= IFF_PORTSEL;
680                 dev->if_port = IF_PORT_10BASET;
681         } else if (data->supported & SUPPORTED_BNC) {
682                 dev->flags |= IFF_PORTSEL;
683                 dev->if_port = IF_PORT_10BASE2;
684         } else
685                 dev->if_port = IF_PORT_UNKNOWN;
686
687         eh = etherh_priv(dev);
688         eh->supported           = data->supported;
689         eh->ctrl                = 0;
690         eh->id                  = ec->cid.product;
691         eh->memc                = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE);
692         if (!eh->memc) {
693                 ret = -ENOMEM;
694                 goto free;
695         }
696
697         eh->ctrl_port = eh->memc;
698         if (data->ctrl_ioc) {
699                 eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE);
700                 if (!eh->ioc_fast) {
701                         ret = -ENOMEM;
702                         goto free;
703                 }
704                 eh->ctrl_port = eh->ioc_fast;
705         }
706
707         dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
708         eh->dma_base = eh->memc + data->dataport_offset;
709         eh->ctrl_port += data->ctrlport_offset;
710
711         /*
712          * IRQ and control port handling - only for non-NIC slot cards.
713          */
714         if (ec->slot_no != 8) {
715                 ecard_setirq(ec, &etherh_ops, eh);
716         } else {
717                 /*
718                  * If we're in the NIC slot, make sure the IRQ is enabled
719                  */
720                 etherh_set_ctrl(eh, ETHERH_CP_IE);
721         }
722
723         ei_local = netdev_priv(dev);
724         spin_lock_init(&ei_local->page_lock);
725
726         if (ec->cid.product == PROD_ANT_ETHERM) {
727                 etherm_addr(dev->dev_addr);
728                 ei_local->reg_offset = etherm_regoffsets;
729         } else {
730                 etherh_addr(dev->dev_addr, ec);
731                 ei_local->reg_offset = etherh_regoffsets;
732         }
733
734         ei_local->name          = dev->name;
735         ei_local->word16        = 1;
736         ei_local->tx_start_page = data->tx_start_page;
737         ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
738         ei_local->stop_page     = data->stop_page;
739         ei_local->reset_8390    = etherh_reset;
740         ei_local->block_input   = etherh_block_input;
741         ei_local->block_output  = etherh_block_output;
742         ei_local->get_8390_hdr  = etherh_get_header;
743         ei_local->interface_num = 0;
744
745         etherh_reset(dev);
746         __NS8390_init(dev, 0);
747
748         ret = register_netdev(dev);
749         if (ret)
750                 goto free;
751
752         netdev_info(dev, "%s in slot %d, %pM\n",
753                     data->name, ec->slot_no, dev->dev_addr);
754
755         ecard_set_drvdata(ec, dev);
756
757         return 0;
758
759  free:
760         free_netdev(dev);
761  release:
762         ecard_release_resources(ec);
763  out:
764         return ret;
765 }
766
767 static void etherh_remove(struct expansion_card *ec)
768 {
769         struct net_device *dev = ecard_get_drvdata(ec);
770
771         ecard_set_drvdata(ec, NULL);
772
773         unregister_netdev(dev);
774
775         free_netdev(dev);
776
777         ecard_release_resources(ec);
778 }
779
780 static struct etherh_data etherm_data = {
781         .ns8390_offset          = ETHERM_NS8390,
782         .dataport_offset        = ETHERM_NS8390 + ETHERM_DATAPORT,
783         .ctrlport_offset        = ETHERM_NS8390 + ETHERM_CTRLPORT,
784         .name                   = "ANT EtherM",
785         .supported              = SUPPORTED_10baseT_Half,
786         .tx_start_page          = ETHERM_TX_START_PAGE,
787         .stop_page              = ETHERM_STOP_PAGE,
788 };
789
790 static struct etherh_data etherlan500_data = {
791         .ns8390_offset          = ETHERH500_NS8390,
792         .dataport_offset        = ETHERH500_NS8390 + ETHERH500_DATAPORT,
793         .ctrlport_offset        = ETHERH500_CTRLPORT,
794         .ctrl_ioc               = 1,
795         .name                   = "i3 EtherH 500",
796         .supported              = SUPPORTED_10baseT_Half,
797         .tx_start_page          = ETHERH_TX_START_PAGE,
798         .stop_page              = ETHERH_STOP_PAGE,
799 };
800
801 static struct etherh_data etherlan600_data = {
802         .ns8390_offset          = ETHERH600_NS8390,
803         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
804         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
805         .name                   = "i3 EtherH 600",
806         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
807         .tx_start_page          = ETHERH_TX_START_PAGE,
808         .stop_page              = ETHERH_STOP_PAGE,
809 };
810
811 static struct etherh_data etherlan600a_data = {
812         .ns8390_offset          = ETHERH600_NS8390,
813         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
814         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
815         .name                   = "i3 EtherH 600A",
816         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
817         .tx_start_page          = ETHERH_TX_START_PAGE,
818         .stop_page              = ETHERH_STOP_PAGE,
819 };
820
821 static const struct ecard_id etherh_ids[] = {
822         { MANU_ANT, PROD_ANT_ETHERM,      &etherm_data       },
823         { MANU_I3,  PROD_I3_ETHERLAN500,  &etherlan500_data  },
824         { MANU_I3,  PROD_I3_ETHERLAN600,  &etherlan600_data  },
825         { MANU_I3,  PROD_I3_ETHERLAN600A, &etherlan600a_data },
826         { 0xffff,   0xffff }
827 };
828
829 static struct ecard_driver etherh_driver = {
830         .probe          = etherh_probe,
831         .remove         = etherh_remove,
832         .id_table       = etherh_ids,
833         .drv = {
834                 .name   = DRV_NAME,
835         },
836 };
837
838 static int __init etherh_init(void)
839 {
840         int i;
841
842         for (i = 0; i < 16; i++) {
843                 etherh_regoffsets[i] = i << 2;
844                 etherm_regoffsets[i] = i << 5;
845         }
846
847         return ecard_register_driver(&etherh_driver);
848 }
849
850 static void __exit etherh_exit(void)
851 {
852         ecard_remove_driver(&etherh_driver);
853 }
854
855 module_init(etherh_init);
856 module_exit(etherh_exit);