GNU Linux-libre 4.14.266-gnu1
[releases.git] / drivers / net / ethernet / cavium / thunder / thunder_xcv.c
1 /*
2  * Copyright (C) 2016 Cavium, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of version 2 of the GNU General Public License
6  * as published by the Free Software Foundation.
7  */
8
9 #include <linux/acpi.h>
10 #include <linux/module.h>
11 #include <linux/interrupt.h>
12 #include <linux/pci.h>
13 #include <linux/netdevice.h>
14 #include <linux/etherdevice.h>
15 #include <linux/phy.h>
16 #include <linux/of.h>
17 #include <linux/of_mdio.h>
18 #include <linux/of_net.h>
19
20 #include "nic.h"
21 #include "thunder_bgx.h"
22
23 #define DRV_NAME        "thunder-xcv"
24 #define DRV_VERSION     "1.0"
25
26 /* Register offsets */
27 #define XCV_RESET               0x00
28 #define   PORT_EN               BIT_ULL(63)
29 #define   CLK_RESET             BIT_ULL(15)
30 #define   DLL_RESET             BIT_ULL(11)
31 #define   COMP_EN               BIT_ULL(7)
32 #define   TX_PKT_RESET          BIT_ULL(3)
33 #define   TX_DATA_RESET         BIT_ULL(2)
34 #define   RX_PKT_RESET          BIT_ULL(1)
35 #define   RX_DATA_RESET         BIT_ULL(0)
36 #define XCV_DLL_CTL             0x10
37 #define   CLKRX_BYP             BIT_ULL(23)
38 #define   CLKTX_BYP             BIT_ULL(15)
39 #define XCV_COMP_CTL            0x20
40 #define   DRV_BYP               BIT_ULL(63)
41 #define XCV_CTL                 0x30
42 #define XCV_INT                 0x40
43 #define XCV_INT_W1S             0x48
44 #define XCV_INT_ENA_W1C         0x50
45 #define XCV_INT_ENA_W1S         0x58
46 #define XCV_INBND_STATUS        0x80
47 #define XCV_BATCH_CRD_RET       0x100
48
49 struct xcv {
50         void __iomem            *reg_base;
51         struct pci_dev          *pdev;
52 };
53
54 static struct xcv *xcv;
55
56 /* Supported devices */
57 static const struct pci_device_id xcv_id_table[] = {
58         { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA056) },
59         { 0, }  /* end of table */
60 };
61
62 MODULE_AUTHOR("Cavium Inc");
63 MODULE_DESCRIPTION("Cavium Thunder RGX/XCV Driver");
64 MODULE_LICENSE("GPL v2");
65 MODULE_VERSION(DRV_VERSION);
66 MODULE_DEVICE_TABLE(pci, xcv_id_table);
67
68 void xcv_init_hw(void)
69 {
70         u64  cfg;
71
72         /* Take DLL out of reset */
73         cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
74         cfg &= ~DLL_RESET;
75         writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
76
77         /* Take clock tree out of reset */
78         cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
79         cfg &= ~CLK_RESET;
80         writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
81         /* Wait for DLL to lock */
82         msleep(1);
83
84         /* Configure DLL - enable or bypass
85          * TX no bypass, RX bypass
86          */
87         cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
88         cfg &= ~0xFF03;
89         cfg |= CLKRX_BYP;
90         writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
91
92         /* Enable compensation controller and force the
93          * write to be visible to HW by readig back.
94          */
95         cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
96         cfg |= COMP_EN;
97         writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
98         readq_relaxed(xcv->reg_base + XCV_RESET);
99         /* Wait for compensation state machine to lock */
100         msleep(10);
101
102         /* enable the XCV block */
103         cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
104         cfg |= PORT_EN;
105         writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
106
107         cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
108         cfg |= CLK_RESET;
109         writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
110 }
111 EXPORT_SYMBOL(xcv_init_hw);
112
113 void xcv_setup_link(bool link_up, int link_speed)
114 {
115         u64  cfg;
116         int speed = 2;
117
118         if (!xcv) {
119                 pr_err("XCV init not done, probe may have failed\n");
120                 return;
121         }
122
123         if (link_speed == 100)
124                 speed = 1;
125         else if (link_speed == 10)
126                 speed = 0;
127
128         if (link_up) {
129                 /* set operating speed */
130                 cfg = readq_relaxed(xcv->reg_base + XCV_CTL);
131                 cfg &= ~0x03;
132                 cfg |= speed;
133                 writeq_relaxed(cfg, xcv->reg_base + XCV_CTL);
134
135                 /* Reset datapaths */
136                 cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
137                 cfg |= TX_DATA_RESET | RX_DATA_RESET;
138                 writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
139
140                 /* Enable the packet flow */
141                 cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
142                 cfg |= TX_PKT_RESET | RX_PKT_RESET;
143                 writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
144
145                 /* Return credits to RGX */
146                 writeq_relaxed(0x01, xcv->reg_base + XCV_BATCH_CRD_RET);
147         } else {
148                 /* Disable packet flow */
149                 cfg = readq_relaxed(xcv->reg_base + XCV_RESET);
150                 cfg &= ~(TX_PKT_RESET | RX_PKT_RESET);
151                 writeq_relaxed(cfg, xcv->reg_base + XCV_RESET);
152                 readq_relaxed(xcv->reg_base + XCV_RESET);
153         }
154 }
155 EXPORT_SYMBOL(xcv_setup_link);
156
157 static int xcv_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
158 {
159         int err;
160         struct device *dev = &pdev->dev;
161
162         xcv = devm_kzalloc(dev, sizeof(struct xcv), GFP_KERNEL);
163         if (!xcv)
164                 return -ENOMEM;
165         xcv->pdev = pdev;
166
167         pci_set_drvdata(pdev, xcv);
168
169         err = pci_enable_device(pdev);
170         if (err) {
171                 dev_err(dev, "Failed to enable PCI device\n");
172                 goto err_kfree;
173         }
174
175         err = pci_request_regions(pdev, DRV_NAME);
176         if (err) {
177                 dev_err(dev, "PCI request regions failed 0x%x\n", err);
178                 goto err_disable_device;
179         }
180
181         /* MAP configuration registers */
182         xcv->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
183         if (!xcv->reg_base) {
184                 dev_err(dev, "XCV: Cannot map CSR memory space, aborting\n");
185                 err = -ENOMEM;
186                 goto err_release_regions;
187         }
188
189         return 0;
190
191 err_release_regions:
192         pci_release_regions(pdev);
193 err_disable_device:
194         pci_disable_device(pdev);
195 err_kfree:
196         devm_kfree(dev, xcv);
197         xcv = NULL;
198         return err;
199 }
200
201 static void xcv_remove(struct pci_dev *pdev)
202 {
203         struct device *dev = &pdev->dev;
204
205         if (xcv) {
206                 devm_kfree(dev, xcv);
207                 xcv = NULL;
208         }
209
210         pci_release_regions(pdev);
211         pci_disable_device(pdev);
212 }
213
214 static struct pci_driver xcv_driver = {
215         .name = DRV_NAME,
216         .id_table = xcv_id_table,
217         .probe = xcv_probe,
218         .remove = xcv_remove,
219 };
220
221 static int __init xcv_init_module(void)
222 {
223         pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION);
224
225         return pci_register_driver(&xcv_driver);
226 }
227
228 static void __exit xcv_cleanup_module(void)
229 {
230         pci_unregister_driver(&xcv_driver);
231 }
232
233 module_init(xcv_init_module);
234 module_exit(xcv_cleanup_module);