drivers/net/phy/dp83848.c

   1 /*
   2  * Driver for the Texas Instruments DP83848 PHY
   3  *
   4  * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/phy.h>
  18
  19 #define TI_DP83848C_PHY_ID              0x20005ca0
  20 #define TI_DP83620_PHY_ID               0x20005ce0
  21 #define NS_DP83848C_PHY_ID              0x20005c90
  22 #define TLK10X_PHY_ID                   0x2000a210
  23
  24 /* Registers */
  25 #define DP83848_MICR                    0x11 /* MII Interrupt Control Register */
  26 #define DP83848_MISR                    0x12 /* MII Interrupt Status Register */
  27
  28 /* MICR Register Fields */
  29 #define DP83848_MICR_INT_OE             BIT(0) /* Interrupt Output Enable */
  30 #define DP83848_MICR_INTEN              BIT(1) /* Interrupt Enable */
  31
  32 /* MISR Register Fields */
  33 #define DP83848_MISR_RHF_INT_EN         BIT(0) /* Receive Error Counter */
  34 #define DP83848_MISR_FHF_INT_EN         BIT(1) /* False Carrier Counter */
  35 #define DP83848_MISR_ANC_INT_EN         BIT(2) /* Auto-negotiation complete */
  36 #define DP83848_MISR_DUP_INT_EN         BIT(3) /* Duplex Status */
  37 #define DP83848_MISR_SPD_INT_EN         BIT(4) /* Speed status */
  38 #define DP83848_MISR_LINK_INT_EN        BIT(5) /* Link status */
  39 #define DP83848_MISR_ED_INT_EN          BIT(6) /* Energy detect */
  40 #define DP83848_MISR_LQM_INT_EN         BIT(7) /* Link Quality Monitor */
  41
  42 #define DP83848_INT_EN_MASK             \
  43         (DP83848_MISR_ANC_INT_EN |      \
  44          DP83848_MISR_DUP_INT_EN |      \
  45          DP83848_MISR_SPD_INT_EN |      \
  46          DP83848_MISR_LINK_INT_EN)
  47
  48 static int dp83848_ack_interrupt(struct phy_device *phydev)
  49 {
  50         int err = phy_read(phydev, DP83848_MISR);
  51
  52         return err < 0 ? err : 0;
  53 }
  54
  55 static int dp83848_config_intr(struct phy_device *phydev)
  56 {
  57         int control, ret;
  58
  59         control = phy_read(phydev, DP83848_MICR);
  60         if (control < 0)
  61                 return control;
  62
  63         if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
  64                 control |= DP83848_MICR_INT_OE;
  65                 control |= DP83848_MICR_INTEN;
  66
  67                 ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
  68                 if (ret < 0)
  69                         return ret;
  70         } else {
  71                 control &= ~DP83848_MICR_INTEN;
  72         }
  73
  74         return phy_write(phydev, DP83848_MICR, control);
  75 }
  76
  77 static int dp83848_config_init(struct phy_device *phydev)
  78 {
  79         int err;
  80         int val;
  81
  82         err = genphy_config_init(phydev);
  83         if (err < 0)
  84                 return err;
  85
  86         /* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
  87          * we check initial value of BMCR Auto negotiation enable bit
  88          */
  89         val = phy_read(phydev, MII_BMCR);
  90         if (!(val & BMCR_ANENABLE))
  91                 phydev->autoneg = AUTONEG_DISABLE;
  92
  93         return 0;
  94 }
  95
  96 static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
  97         { TI_DP83848C_PHY_ID, 0xfffffff0 },
  98         { NS_DP83848C_PHY_ID, 0xfffffff0 },
  99         { TI_DP83620_PHY_ID, 0xfffffff0 },
 100         { TLK10X_PHY_ID, 0xfffffff0 },
 101         { }
 102 };
 103 MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 104
 105 #define DP83848_PHY_DRIVER(_id, _name, _config_init)            \
 106         {                                                       \
 107                 .phy_id         = _id,                          \
 108                 .phy_id_mask    = 0xfffffff0,                   \
 109                 .name           = _name,                        \
 110                 .features       = PHY_BASIC_FEATURES,           \
 111                 .flags          = PHY_HAS_INTERRUPT,            \
 112                                                                 \
 113                 .soft_reset     = genphy_soft_reset,            \
 114                 .config_init    = _config_init,                 \
 115                 .suspend        = genphy_suspend,               \
 116                 .resume         = genphy_resume,                \
 117                                                                 \
 118                 /* IRQ related */                               \
 119                 .ack_interrupt  = dp83848_ack_interrupt,        \
 120                 .config_intr    = dp83848_config_intr,          \
 121         }
 122
 123 static struct phy_driver dp83848_driver[] = {
 124         DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
 125                            genphy_config_init),
 126         DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
 127                            genphy_config_init),
 128         DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
 129                            dp83848_config_init),
 130         DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
 131                            genphy_config_init),
 132 };
 133 module_phy_driver(dp83848_driver);
 134
 135 MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
 136 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
 137 MODULE_LICENSE("GPL");