drivers/net/wireless/ath/carl9170/usb.c

   1 /*
   2  * Atheros CARL9170 driver
   3  *
   4  * USB - frontend
   5  *
   6  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
   7  * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; see the file COPYING.  If not, see
  21  * http://www.gnu.org/licenses/.
  22  *
  23  * This file incorporates work covered by the following copyright and
  24  * permission notice:
  25  *    Copyright (c) 2007-2008 Atheros Communications, Inc.
  26  *
  27  *    Permission to use, copy, modify, and/or distribute this software for any
  28  *    purpose with or without fee is hereby granted, provided that the above
  29  *    copyright notice and this permission notice appear in all copies.
  30  *
  31  *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  32  *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  33  *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  34  *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  35  *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  36  *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  37  *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  38  */
  39
  40 #include <linux/module.h>
  41 #include <linux/slab.h>
  42 #include <linux/usb.h>
  43 #include <linux/firmware.h>
  44 #include <linux/etherdevice.h>
  45 #include <linux/device.h>
  46 #include <net/mac80211.h>
  47 #include "carl9170.h"
  48 #include "cmd.h"
  49 #include "hw.h"
  50 #include "fwcmd.h"
  51
  52 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
  53 MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
  54 MODULE_LICENSE("GPL");
  55 MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
  56 MODULE_FIRMWARE(CARL9170FW_NAME);
  57 MODULE_ALIAS("ar9170usb");
  58 MODULE_ALIAS("arusb_lnx");
  59
  60 /*
  61  * Note:
  62  *
  63  * Always update our wiki's device list (located at:
  64  * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
  65  * whenever you add a new device.
  66  */
  67 static struct usb_device_id carl9170_usb_ids[] = {
  68         /* Atheros 9170 */
  69         { USB_DEVICE(0x0cf3, 0x9170) },
  70         /* Atheros TG121N */
  71         { USB_DEVICE(0x0cf3, 0x1001) },
  72         /* TP-Link TL-WN821N v2 */
  73         { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
  74                  CARL9170_ONE_LED },
  75         /* 3Com Dual Band 802.11n USB Adapter */
  76         { USB_DEVICE(0x0cf3, 0x1010) },
  77         /* H3C Dual Band 802.11n USB Adapter */
  78         { USB_DEVICE(0x0cf3, 0x1011) },
  79         /* Cace Airpcap NX */
  80         { USB_DEVICE(0xcace, 0x0300) },
  81         /* D-Link DWA 160 A1 */
  82         { USB_DEVICE(0x07d1, 0x3c10) },
  83         /* D-Link DWA 160 A2 */
  84         { USB_DEVICE(0x07d1, 0x3a09) },
  85         /* D-Link DWA 130 D */
  86         { USB_DEVICE(0x07d1, 0x3a0f) },
  87         /* Netgear WNA1000 */
  88         { USB_DEVICE(0x0846, 0x9040) },
  89         /* Netgear WNDA3100 (v1) */
  90         { USB_DEVICE(0x0846, 0x9010) },
  91         /* Netgear WN111 v2 */
  92         { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
  93         /* Zydas ZD1221 */
  94         { USB_DEVICE(0x0ace, 0x1221) },
  95         /* Proxim ORiNOCO 802.11n USB */
  96         { USB_DEVICE(0x1435, 0x0804) },
  97         /* WNC Generic 11n USB Dongle */
  98         { USB_DEVICE(0x1435, 0x0326) },
  99         /* ZyXEL NWD271N */
 100         { USB_DEVICE(0x0586, 0x3417) },
 101         /* Z-Com UB81 BG */
 102         { USB_DEVICE(0x0cde, 0x0023) },
 103         /* Z-Com UB82 ABG */
 104         { USB_DEVICE(0x0cde, 0x0026) },
 105         /* Sphairon Homelink 1202 */
 106         { USB_DEVICE(0x0cde, 0x0027) },
 107         /* Arcadyan WN7512 */
 108         { USB_DEVICE(0x083a, 0xf522) },
 109         /* Planex GWUS300 */
 110         { USB_DEVICE(0x2019, 0x5304) },
 111         /* IO-Data WNGDNUS2 */
 112         { USB_DEVICE(0x04bb, 0x093f) },
 113         /* NEC WL300NU-G */
 114         { USB_DEVICE(0x0409, 0x0249) },
 115         /* NEC WL300NU-AG */
 116         { USB_DEVICE(0x0409, 0x02b4) },
 117         /* AVM FRITZ!WLAN USB Stick N */
 118         { USB_DEVICE(0x057c, 0x8401) },
 119         /* AVM FRITZ!WLAN USB Stick N 2.4 */
 120         { USB_DEVICE(0x057c, 0x8402) },
 121         /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
 122         { USB_DEVICE(0x1668, 0x1200) },
 123         /* Airlive X.USB a/b/g/n */
 124         { USB_DEVICE(0x1b75, 0x9170) },
 125
 126         /* terminate */
 127         {}
 128 };
 129 MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);
 130
 131 static struct usb_driver carl9170_driver;
 132
 133 static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
 134 {
 135         struct urb *urb;
 136         int err;
 137
 138         if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS)
 139                 goto err_acc;
 140
 141         urb = usb_get_from_anchor(&ar->tx_wait);
 142         if (!urb)
 143                 goto err_acc;
 144
 145         usb_anchor_urb(urb, &ar->tx_anch);
 146
 147         err = usb_submit_urb(urb, GFP_ATOMIC);
 148         if (unlikely(err)) {
 149                 if (net_ratelimit()) {
 150                         dev_err(&ar->udev->dev, "tx submit failed (%d)\n",
 151                                 urb->status);
 152                 }
 153
 154                 usb_unanchor_urb(urb);
 155                 usb_anchor_urb(urb, &ar->tx_err);
 156         }
 157
 158         usb_free_urb(urb);
 159
 160         if (likely(err == 0))
 161                 return;
 162
 163 err_acc:
 164         atomic_dec(&ar->tx_anch_urbs);
 165 }
 166
 167 static void carl9170_usb_tx_data_complete(struct urb *urb)
 168 {
 169         struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 170
 171         if (WARN_ON_ONCE(!ar)) {
 172                 dev_kfree_skb_irq(urb->context);
 173                 return;
 174         }
 175
 176         atomic_dec(&ar->tx_anch_urbs);
 177
 178         switch (urb->status) {
 179         /* everything is fine */
 180         case 0:
 181                 carl9170_tx_callback(ar, (void *)urb->context);
 182                 break;
 183
 184         /* disconnect */
 185         case -ENOENT:
 186         case -ECONNRESET:
 187         case -ENODEV:
 188         case -ESHUTDOWN:
 189                 /*
 190                  * Defer the frame clean-up to the tasklet worker.
 191                  * This is necessary, because carl9170_tx_drop
 192                  * does not work in an irqsave context.
 193                  */
 194                 usb_anchor_urb(urb, &ar->tx_err);
 195                 return;
 196
 197         /* a random transmission error has occurred? */
 198         default:
 199                 if (net_ratelimit()) {
 200                         dev_err(&ar->udev->dev, "tx failed (%d)\n",
 201                                 urb->status);
 202                 }
 203
 204                 usb_anchor_urb(urb, &ar->tx_err);
 205                 break;
 206         }
 207
 208         if (likely(IS_STARTED(ar)))
 209                 carl9170_usb_submit_data_urb(ar);
 210 }
 211
 212 static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar)
 213 {
 214         struct urb *urb;
 215         int err;
 216
 217         if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) {
 218                 atomic_dec(&ar->tx_cmd_urbs);
 219                 return 0;
 220         }
 221
 222         urb = usb_get_from_anchor(&ar->tx_cmd);
 223         if (!urb) {
 224                 atomic_dec(&ar->tx_cmd_urbs);
 225                 return 0;
 226         }
 227
 228         usb_anchor_urb(urb, &ar->tx_anch);
 229         err = usb_submit_urb(urb, GFP_ATOMIC);
 230         if (unlikely(err)) {
 231                 usb_unanchor_urb(urb);
 232                 atomic_dec(&ar->tx_cmd_urbs);
 233         }
 234         usb_free_urb(urb);
 235
 236         return err;
 237 }
 238
 239 static void carl9170_usb_cmd_complete(struct urb *urb)
 240 {
 241         struct ar9170 *ar = urb->context;
 242         int err = 0;
 243
 244         if (WARN_ON_ONCE(!ar))
 245                 return;
 246
 247         atomic_dec(&ar->tx_cmd_urbs);
 248
 249         switch (urb->status) {
 250         /* everything is fine */
 251         case 0:
 252                 break;
 253
 254         /* disconnect */
 255         case -ENOENT:
 256         case -ECONNRESET:
 257         case -ENODEV:
 258         case -ESHUTDOWN:
 259                 return;
 260
 261         default:
 262                 err = urb->status;
 263                 break;
 264         }
 265
 266         if (!IS_INITIALIZED(ar))
 267                 return;
 268
 269         if (err)
 270                 dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err);
 271
 272         err = carl9170_usb_submit_cmd_urb(ar);
 273         if (err)
 274                 dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err);
 275 }
 276
 277 static void carl9170_usb_rx_irq_complete(struct urb *urb)
 278 {
 279         struct ar9170 *ar = urb->context;
 280
 281         if (WARN_ON_ONCE(!ar))
 282                 return;
 283
 284         switch (urb->status) {
 285         /* everything is fine */
 286         case 0:
 287                 break;
 288
 289         /* disconnect */
 290         case -ENOENT:
 291         case -ECONNRESET:
 292         case -ENODEV:
 293         case -ESHUTDOWN:
 294                 return;
 295
 296         default:
 297                 goto resubmit;
 298         }
 299
 300         /*
 301          * While the carl9170 firmware does not use this EP, the
 302          * firmware loader in the EEPROM unfortunately does.
 303          * Therefore we need to be ready to handle out-of-band
 304          * responses and traps in case the firmware crashed and
 305          * the loader took over again.
 306          */
 307         carl9170_handle_command_response(ar, urb->transfer_buffer,
 308                                          urb->actual_length);
 309
 310 resubmit:
 311         usb_anchor_urb(urb, &ar->rx_anch);
 312         if (unlikely(usb_submit_urb(urb, GFP_ATOMIC)))
 313                 usb_unanchor_urb(urb);
 314 }
 315
 316 static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp)
 317 {
 318         struct urb *urb;
 319         int err = 0, runs = 0;
 320
 321         while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) &&
 322                 (runs++ < AR9170_NUM_RX_URBS)) {
 323                 err = -ENOSPC;
 324                 urb = usb_get_from_anchor(&ar->rx_pool);
 325                 if (urb) {
 326                         usb_anchor_urb(urb, &ar->rx_anch);
 327                         err = usb_submit_urb(urb, gfp);
 328                         if (unlikely(err)) {
 329                                 usb_unanchor_urb(urb);
 330                                 usb_anchor_urb(urb, &ar->rx_pool);
 331                         } else {
 332                                 atomic_dec(&ar->rx_pool_urbs);
 333                                 atomic_inc(&ar->rx_anch_urbs);
 334                         }
 335                         usb_free_urb(urb);
 336                 }
 337         }
 338
 339         return err;
 340 }
 341
 342 static void carl9170_usb_rx_work(struct ar9170 *ar)
 343 {
 344         struct urb *urb;
 345         int i;
 346
 347         for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
 348                 urb = usb_get_from_anchor(&ar->rx_work);
 349                 if (!urb)
 350                         break;
 351
 352                 atomic_dec(&ar->rx_work_urbs);
 353                 if (IS_INITIALIZED(ar)) {
 354                         carl9170_rx(ar, urb->transfer_buffer,
 355                                     urb->actual_length);
 356                 }
 357
 358                 usb_anchor_urb(urb, &ar->rx_pool);
 359                 atomic_inc(&ar->rx_pool_urbs);
 360
 361                 usb_free_urb(urb);
 362
 363                 carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
 364         }
 365 }
 366
 367 void carl9170_usb_handle_tx_err(struct ar9170 *ar)
 368 {
 369         struct urb *urb;
 370
 371         while ((urb = usb_get_from_anchor(&ar->tx_err))) {
 372                 struct sk_buff *skb = (void *)urb->context;
 373
 374                 carl9170_tx_drop(ar, skb);
 375                 carl9170_tx_callback(ar, skb);
 376                 usb_free_urb(urb);
 377         }
 378 }
 379
 380 static void carl9170_usb_tasklet(unsigned long data)
 381 {
 382         struct ar9170 *ar = (struct ar9170 *) data;
 383
 384         if (!IS_INITIALIZED(ar))
 385                 return;
 386
 387         carl9170_usb_rx_work(ar);
 388
 389         /*
 390          * Strictly speaking: The tx scheduler is not part of the USB system.
 391          * But the rx worker returns frames back to the mac80211-stack and
 392          * this is the _perfect_ place to generate the next transmissions.
 393          */
 394         if (IS_STARTED(ar))
 395                 carl9170_tx_scheduler(ar);
 396 }
 397
 398 static void carl9170_usb_rx_complete(struct urb *urb)
 399 {
 400         struct ar9170 *ar = (struct ar9170 *)urb->context;
 401         int err;
 402
 403         if (WARN_ON_ONCE(!ar))
 404                 return;
 405
 406         atomic_dec(&ar->rx_anch_urbs);
 407
 408         switch (urb->status) {
 409         case 0:
 410                 /* rx path */
 411                 usb_anchor_urb(urb, &ar->rx_work);
 412                 atomic_inc(&ar->rx_work_urbs);
 413                 break;
 414
 415         case -ENOENT:
 416         case -ECONNRESET:
 417         case -ENODEV:
 418         case -ESHUTDOWN:
 419                 /* handle disconnect events*/
 420                 return;
 421
 422         default:
 423                 /* handle all other errors */
 424                 usb_anchor_urb(urb, &ar->rx_pool);
 425                 atomic_inc(&ar->rx_pool_urbs);
 426                 break;
 427         }
 428
 429         err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
 430         if (unlikely(err)) {
 431                 /*
 432                  * usb_submit_rx_urb reported a problem.
 433                  * In case this is due to a rx buffer shortage,
 434                  * elevate the tasklet worker priority to
 435                  * the highest available level.
 436                  */
 437                 tasklet_hi_schedule(&ar->usb_tasklet);
 438
 439                 if (atomic_read(&ar->rx_anch_urbs) == 0) {
 440                         /*
 441                          * The system is too slow to cope with
 442                          * the enormous workload. We have simply
 443                          * run out of active rx urbs and this
 444                          * unfortunately leads to an unpredictable
 445                          * device.
 446                          */
 447
 448                         ieee80211_queue_work(ar->hw, &ar->ping_work);
 449                 }
 450         } else {
 451                 /*
 452                  * Using anything less than _high_ priority absolutely
 453                  * kills the rx performance my UP-System...
 454                  */
 455                 tasklet_hi_schedule(&ar->usb_tasklet);
 456         }
 457 }
 458
 459 static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp)
 460 {
 461         struct urb *urb;
 462         void *buf;
 463
 464         buf = kmalloc(ar->fw.rx_size, gfp);
 465         if (!buf)
 466                 return NULL;
 467
 468         urb = usb_alloc_urb(0, gfp);
 469         if (!urb) {
 470                 kfree(buf);
 471                 return NULL;
 472         }
 473
 474         usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev,
 475                           AR9170_USB_EP_RX), buf, ar->fw.rx_size,
 476                           carl9170_usb_rx_complete, ar);
 477
 478         urb->transfer_flags |= URB_FREE_BUFFER;
 479
 480         return urb;
 481 }
 482
 483 static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar)
 484 {
 485         struct urb *urb = NULL;
 486         void *ibuf;
 487         int err = -ENOMEM;
 488
 489         urb = usb_alloc_urb(0, GFP_KERNEL);
 490         if (!urb)
 491                 goto out;
 492
 493         ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL);
 494         if (!ibuf)
 495                 goto out;
 496
 497         usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev,
 498                          AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX,
 499                          carl9170_usb_rx_irq_complete, ar, 1);
 500
 501         urb->transfer_flags |= URB_FREE_BUFFER;
 502
 503         usb_anchor_urb(urb, &ar->rx_anch);
 504         err = usb_submit_urb(urb, GFP_KERNEL);
 505         if (err)
 506                 usb_unanchor_urb(urb);
 507
 508 out:
 509         usb_free_urb(urb);
 510         return err;
 511 }
 512
 513 static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar)
 514 {
 515         struct urb *urb;
 516         int i, err = -EINVAL;
 517
 518         /*
 519          * The driver actively maintains a second shadow
 520          * pool for inactive, but fully-prepared rx urbs.
 521          *
 522          * The pool should help the driver to master huge
 523          * workload spikes without running the risk of
 524          * undersupplying the hardware or wasting time by
 525          * processing rx data (streams) inside the urb
 526          * completion (hardirq context).
 527          */
 528         for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
 529                 urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL);
 530                 if (!urb) {
 531                         err = -ENOMEM;
 532                         goto err_out;
 533                 }
 534
 535                 usb_anchor_urb(urb, &ar->rx_pool);
 536                 atomic_inc(&ar->rx_pool_urbs);
 537                 usb_free_urb(urb);
 538         }
 539
 540         err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL);
 541         if (err)
 542                 goto err_out;
 543
 544         /* the device now waiting for the firmware. */
 545         carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
 546         return 0;
 547
 548 err_out:
 549
 550         usb_scuttle_anchored_urbs(&ar->rx_pool);
 551         usb_scuttle_anchored_urbs(&ar->rx_work);
 552         usb_kill_anchored_urbs(&ar->rx_anch);
 553         return err;
 554 }
 555
 556 static int carl9170_usb_flush(struct ar9170 *ar)
 557 {
 558         struct urb *urb;
 559         int ret, err = 0;
 560
 561         while ((urb = usb_get_from_anchor(&ar->tx_wait))) {
 562                 struct sk_buff *skb = (void *)urb->context;
 563                 carl9170_tx_drop(ar, skb);
 564                 carl9170_tx_callback(ar, skb);
 565                 usb_free_urb(urb);
 566         }
 567
 568         ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
 569         if (ret == 0)
 570                 err = -ETIMEDOUT;
 571
 572         /* lets wait a while until the tx - queues are dried out */
 573         ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
 574         if (ret == 0)
 575                 err = -ETIMEDOUT;
 576
 577         usb_kill_anchored_urbs(&ar->tx_anch);
 578         carl9170_usb_handle_tx_err(ar);
 579
 580         return err;
 581 }
 582
 583 static void carl9170_usb_cancel_urbs(struct ar9170 *ar)
 584 {
 585         int err;
 586
 587         carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);
 588
 589         err = carl9170_usb_flush(ar);
 590         if (err)
 591                 dev_err(&ar->udev->dev, "stuck tx urbs!\n");
 592
 593         usb_poison_anchored_urbs(&ar->tx_anch);
 594         carl9170_usb_handle_tx_err(ar);
 595         usb_poison_anchored_urbs(&ar->rx_anch);
 596
 597         tasklet_kill(&ar->usb_tasklet);
 598
 599         usb_scuttle_anchored_urbs(&ar->rx_work);
 600         usb_scuttle_anchored_urbs(&ar->rx_pool);
 601         usb_scuttle_anchored_urbs(&ar->tx_cmd);
 602 }
 603
 604 int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
 605                         const bool free_buf)
 606 {
 607         struct urb *urb;
 608         int err = 0;
 609
 610         if (!IS_INITIALIZED(ar)) {
 611                 err = -EPERM;
 612                 goto err_free;
 613         }
 614
 615         if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) {
 616                 err = -EINVAL;
 617                 goto err_free;
 618         }
 619
 620         urb = usb_alloc_urb(0, GFP_ATOMIC);
 621         if (!urb) {
 622                 err = -ENOMEM;
 623                 goto err_free;
 624         }
 625
 626         if (ar->usb_ep_cmd_is_bulk)
 627                 usb_fill_bulk_urb(urb, ar->udev,
 628                                   usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD),
 629                                   cmd, cmd->hdr.len + 4,
 630                                   carl9170_usb_cmd_complete, ar);
 631         else
 632                 usb_fill_int_urb(urb, ar->udev,
 633                                  usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD),
 634                                  cmd, cmd->hdr.len + 4,
 635                                  carl9170_usb_cmd_complete, ar, 1);
 636
 637         if (free_buf)
 638                 urb->transfer_flags |= URB_FREE_BUFFER;
 639
 640         usb_anchor_urb(urb, &ar->tx_cmd);
 641         usb_free_urb(urb);
 642
 643         return carl9170_usb_submit_cmd_urb(ar);
 644
 645 err_free:
 646         if (free_buf)
 647                 kfree(cmd);
 648
 649         return err;
 650 }
 651
 652 int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd,
 653         unsigned int plen, void *payload, unsigned int outlen, void *out)
 654 {
 655         int err = -ENOMEM;
 656         unsigned long time_left;
 657
 658         if (!IS_ACCEPTING_CMD(ar))
 659                 return -EIO;
 660
 661         if (!(cmd & CARL9170_CMD_ASYNC_FLAG))
 662                 might_sleep();
 663
 664         ar->cmd.hdr.len = plen;
 665         ar->cmd.hdr.cmd = cmd;
 666         /* writing multiple regs fills this buffer already */
 667         if (plen && payload != (u8 *)(ar->cmd.data))
 668                 memcpy(ar->cmd.data, payload, plen);
 669
 670         spin_lock_bh(&ar->cmd_lock);
 671         ar->readbuf = (u8 *)out;
 672         ar->readlen = outlen;
 673         spin_unlock_bh(&ar->cmd_lock);
 674
 675         reinit_completion(&ar->cmd_wait);
 676         err = __carl9170_exec_cmd(ar, &ar->cmd, false);
 677
 678         if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) {
 679                 time_left = wait_for_completion_timeout(&ar->cmd_wait, HZ);
 680                 if (time_left == 0) {
 681                         err = -ETIMEDOUT;
 682                         goto err_unbuf;
 683                 }
 684
 685                 if (ar->readlen != outlen) {
 686                         err = -EMSGSIZE;
 687                         goto err_unbuf;
 688                 }
 689         }
 690
 691         return 0;
 692
 693 err_unbuf:
 694         /* Maybe the device was removed in the moment we were waiting? */
 695         if (IS_STARTED(ar)) {
 696                 dev_err(&ar->udev->dev, "no command feedback "
 697                         "received (%d).\n", err);
 698
 699                 /* provide some maybe useful debug information */
 700                 print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE,
 701                                      &ar->cmd, plen + 4);
 702
 703                 carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT);
 704         }
 705
 706         /* invalidate to avoid completing the next command prematurely */
 707         spin_lock_bh(&ar->cmd_lock);
 708         ar->readbuf = NULL;
 709         ar->readlen = 0;
 710         spin_unlock_bh(&ar->cmd_lock);
 711
 712         return err;
 713 }
 714
 715 void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
 716 {
 717         struct urb *urb;
 718         struct ar9170_stream *tx_stream;
 719         void *data;
 720         unsigned int len;
 721
 722         if (!IS_STARTED(ar))
 723                 goto err_drop;
 724
 725         urb = usb_alloc_urb(0, GFP_ATOMIC);
 726         if (!urb)
 727                 goto err_drop;
 728
 729         if (ar->fw.tx_stream) {
 730                 tx_stream = (void *) (skb->data - sizeof(*tx_stream));
 731
 732                 len = skb->len + sizeof(*tx_stream);
 733                 tx_stream->length = cpu_to_le16(len);
 734                 tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG);
 735                 data = tx_stream;
 736         } else {
 737                 data = skb->data;
 738                 len = skb->len;
 739         }
 740
 741         usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev,
 742                 AR9170_USB_EP_TX), data, len,
 743                 carl9170_usb_tx_data_complete, skb);
 744
 745         urb->transfer_flags |= URB_ZERO_PACKET;
 746
 747         usb_anchor_urb(urb, &ar->tx_wait);
 748
 749         usb_free_urb(urb);
 750
 751         carl9170_usb_submit_data_urb(ar);
 752         return;
 753
 754 err_drop:
 755         carl9170_tx_drop(ar, skb);
 756         carl9170_tx_callback(ar, skb);
 757 }
 758
 759 static void carl9170_release_firmware(struct ar9170 *ar)
 760 {
 761         if (ar->fw.fw) {
 762                 release_firmware(ar->fw.fw);
 763                 memset(&ar->fw, 0, sizeof(ar->fw));
 764         }
 765 }
 766
 767 void carl9170_usb_stop(struct ar9170 *ar)
 768 {
 769         int ret;
 770
 771         carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED);
 772
 773         ret = carl9170_usb_flush(ar);
 774         if (ret)
 775                 dev_err(&ar->udev->dev, "kill pending tx urbs.\n");
 776
 777         usb_poison_anchored_urbs(&ar->tx_anch);
 778         carl9170_usb_handle_tx_err(ar);
 779
 780         /* kill any pending command */
 781         spin_lock_bh(&ar->cmd_lock);
 782         ar->readlen = 0;
 783         spin_unlock_bh(&ar->cmd_lock);
 784         complete(&ar->cmd_wait);
 785
 786         /*
 787          * Note:
 788          * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
 789          * Else we would end up with a unresponsive device...
 790          */
 791 }
 792
 793 int carl9170_usb_open(struct ar9170 *ar)
 794 {
 795         usb_unpoison_anchored_urbs(&ar->tx_anch);
 796
 797         carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
 798         return 0;
 799 }
 800
 801 static int carl9170_usb_load_firmware(struct ar9170 *ar)
 802 {
 803         const u8 *data;
 804         u8 *buf;
 805         unsigned int transfer;
 806         size_t len;
 807         u32 addr;
 808         int err = 0;
 809
 810         buf = kmalloc(4096, GFP_KERNEL);
 811         if (!buf) {
 812                 err = -ENOMEM;
 813                 goto err_out;
 814         }
 815
 816         data = ar->fw.fw->data;
 817         len = ar->fw.fw->size;
 818         addr = ar->fw.address;
 819
 820         /* this removes the miniboot image */
 821         data += ar->fw.offset;
 822         len -= ar->fw.offset;
 823
 824         while (len) {
 825                 transfer = min_t(unsigned int, len, 4096u);
 826                 memcpy(buf, data, transfer);
 827
 828                 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
 829                                       0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
 830                                       addr >> 8, 0, buf, transfer, 100);
 831
 832                 if (err < 0) {
 833                         kfree(buf);
 834                         goto err_out;
 835                 }
 836
 837                 len -= transfer;
 838                 data += transfer;
 839                 addr += transfer;
 840         }
 841         kfree(buf);
 842
 843         err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
 844                               0x31 /* FW DL COMPLETE */,
 845                               0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200);
 846
 847         if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) {
 848                 err = -ETIMEDOUT;
 849                 goto err_out;
 850         }
 851
 852         err = carl9170_echo_test(ar, 0x4a110123);
 853         if (err)
 854                 goto err_out;
 855
 856         /* now, start the command response counter */
 857         ar->cmd_seq = -1;
 858
 859         return 0;
 860
 861 err_out:
 862         dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err);
 863         return err;
 864 }
 865
 866 int carl9170_usb_restart(struct ar9170 *ar)
 867 {
 868         int err = 0;
 869
 870         if (ar->intf->condition != USB_INTERFACE_BOUND)
 871                 return 0;
 872
 873         /*
 874          * Disable the command response sequence counter check.
 875          * We already know that the device/firmware is in a bad state.
 876          * So, no extra points are awarded to anyone who reminds the
 877          * driver about that.
 878          */
 879         ar->cmd_seq = -2;
 880
 881         err = carl9170_reboot(ar);
 882
 883         carl9170_usb_stop(ar);
 884
 885         if (err)
 886                 goto err_out;
 887
 888         tasklet_schedule(&ar->usb_tasklet);
 889
 890         /* The reboot procedure can take quite a while to complete. */
 891         msleep(1100);
 892
 893         err = carl9170_usb_open(ar);
 894         if (err)
 895                 goto err_out;
 896
 897         err = carl9170_usb_load_firmware(ar);
 898         if (err)
 899                 goto err_out;
 900
 901         return 0;
 902
 903 err_out:
 904         carl9170_usb_cancel_urbs(ar);
 905         return err;
 906 }
 907
 908 void carl9170_usb_reset(struct ar9170 *ar)
 909 {
 910         /*
 911          * This is the last resort to get the device going again
 912          * without any *user replugging action*.
 913          *
 914          * But there is a catch: usb_reset really is like a physical
 915          * *reconnect*. The mac80211 state will be lost in the process.
 916          * Therefore a userspace application, which is monitoring
 917          * the link must step in.
 918          */
 919         carl9170_usb_cancel_urbs(ar);
 920
 921         carl9170_usb_stop(ar);
 922
 923         usb_queue_reset_device(ar->intf);
 924 }
 925
 926 static int carl9170_usb_init_device(struct ar9170 *ar)
 927 {
 928         int err;
 929
 930         /*
 931          * The carl9170 firmware let's the driver know when it's
 932          * ready for action. But we have to be prepared to gracefully
 933          * handle all spurious [flushed] messages after each (re-)boot.
 934          * Thus the command response counter remains disabled until it
 935          * can be safely synchronized.
 936          */
 937         ar->cmd_seq = -2;
 938
 939         err = carl9170_usb_send_rx_irq_urb(ar);
 940         if (err)
 941                 goto err_out;
 942
 943         err = carl9170_usb_init_rx_bulk_urbs(ar);
 944         if (err)
 945                 goto err_unrx;
 946
 947         err = carl9170_usb_open(ar);
 948         if (err)
 949                 goto err_unrx;
 950
 951         mutex_lock(&ar->mutex);
 952         err = carl9170_usb_load_firmware(ar);
 953         mutex_unlock(&ar->mutex);
 954         if (err)
 955                 goto err_stop;
 956
 957         return 0;
 958
 959 err_stop:
 960         carl9170_usb_stop(ar);
 961
 962 err_unrx:
 963         carl9170_usb_cancel_urbs(ar);
 964
 965 err_out:
 966         return err;
 967 }
 968
 969 static void carl9170_usb_firmware_failed(struct ar9170 *ar)
 970 {
 971         /* Store a copies of the usb_interface and usb_device pointer locally.
 972          * This is because release_driver initiates carl9170_usb_disconnect,
 973          * which in turn frees our driver context (ar).
 974          */
 975         struct usb_interface *intf = ar->intf;
 976         struct usb_device *udev = ar->udev;
 977
 978         complete(&ar->fw_load_wait);
 979         /* at this point 'ar' could be already freed. Don't use it anymore */
 980         ar = NULL;
 981
 982         /* unbind anything failed */
 983         usb_lock_device(udev);
 984         usb_driver_release_interface(&carl9170_driver, intf);
 985         usb_unlock_device(udev);
 986
 987         usb_put_intf(intf);
 988 }
 989
 990 static void carl9170_usb_firmware_finish(struct ar9170 *ar)
 991 {
 992         struct usb_interface *intf = ar->intf;
 993         int err;
 994
 995         err = carl9170_parse_firmware(ar);
 996         if (err)
 997                 goto err_freefw;
 998
 999         err = carl9170_usb_init_device(ar);
1000         if (err)
1001                 goto err_freefw;
1002
1003         err = carl9170_register(ar);
1004
1005         carl9170_usb_stop(ar);
1006         if (err)
1007                 goto err_unrx;
1008
1009         complete(&ar->fw_load_wait);
1010         usb_put_intf(intf);
1011         return;
1012
1013 err_unrx:
1014         carl9170_usb_cancel_urbs(ar);
1015
1016 err_freefw:
1017         carl9170_release_firmware(ar);
1018         carl9170_usb_firmware_failed(ar);
1019 }
1020
1021 static void carl9170_usb_firmware_step2(const struct firmware *fw,
1022                                         void *context)
1023 {
1024         struct ar9170 *ar = context;
1025
1026         if (fw) {
1027                 ar->fw.fw = fw;
1028                 carl9170_usb_firmware_finish(ar);
1029                 return;
1030         }
1031
1032         dev_err(&ar->udev->dev, "firmware not found.\n");
1033         carl9170_usb_firmware_failed(ar);
1034 }
1035
1036 static int carl9170_usb_probe(struct usb_interface *intf,
1037                               const struct usb_device_id *id)
1038 {
1039         struct usb_endpoint_descriptor *ep;
1040         struct ar9170 *ar;
1041         struct usb_device *udev;
1042         int i, err;
1043
1044         err = usb_reset_device(interface_to_usbdev(intf));
1045         if (err)
1046                 return err;
1047
1048         ar = carl9170_alloc(sizeof(*ar));
1049         if (IS_ERR(ar))
1050                 return PTR_ERR(ar);
1051
1052         udev = interface_to_usbdev(intf);
1053         ar->udev = udev;
1054         ar->intf = intf;
1055         ar->features = id->driver_info;
1056
1057         /* We need to remember the type of endpoint 4 because it differs
1058          * between high- and full-speed configuration. The high-speed
1059          * configuration specifies it as interrupt and the full-speed
1060          * configuration as bulk endpoint. This information is required
1061          * later when sending urbs to that endpoint.
1062          */
1063         for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) {
1064                 ep = &intf->cur_altsetting->endpoint[i].desc;
1065
1066                 if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD &&
1067                     usb_endpoint_dir_out(ep) &&
1068                     usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK)
1069                         ar->usb_ep_cmd_is_bulk = true;
1070         }
1071
1072         usb_set_intfdata(intf, ar);
1073         SET_IEEE80211_DEV(ar->hw, &intf->dev);
1074
1075         init_usb_anchor(&ar->rx_anch);
1076         init_usb_anchor(&ar->rx_pool);
1077         init_usb_anchor(&ar->rx_work);
1078         init_usb_anchor(&ar->tx_wait);
1079         init_usb_anchor(&ar->tx_anch);
1080         init_usb_anchor(&ar->tx_cmd);
1081         init_usb_anchor(&ar->tx_err);
1082         init_completion(&ar->cmd_wait);
1083         init_completion(&ar->fw_boot_wait);
1084         init_completion(&ar->fw_load_wait);
1085         tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet,
1086                      (unsigned long)ar);
1087
1088         atomic_set(&ar->tx_cmd_urbs, 0);
1089         atomic_set(&ar->tx_anch_urbs, 0);
1090         atomic_set(&ar->rx_work_urbs, 0);
1091         atomic_set(&ar->rx_anch_urbs, 0);
1092         atomic_set(&ar->rx_pool_urbs, 0);
1093
1094         usb_get_intf(intf);
1095
1096         carl9170_set_state(ar, CARL9170_STOPPED);
1097
1098         err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
1099                 &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
1100         if (err) {
1101                 usb_put_intf(intf);
1102                 carl9170_free(ar);
1103         }
1104         return err;
1105 }
1106
1107 static void carl9170_usb_disconnect(struct usb_interface *intf)
1108 {
1109         struct ar9170 *ar = usb_get_intfdata(intf);
1110         struct usb_device *udev;
1111
1112         if (WARN_ON(!ar))
1113                 return;
1114
1115         udev = ar->udev;
1116         wait_for_completion(&ar->fw_load_wait);
1117
1118         if (IS_INITIALIZED(ar)) {
1119                 carl9170_reboot(ar);
1120                 carl9170_usb_stop(ar);
1121         }
1122
1123         carl9170_usb_cancel_urbs(ar);
1124         carl9170_unregister(ar);
1125
1126         usb_set_intfdata(intf, NULL);
1127
1128         carl9170_release_firmware(ar);
1129         carl9170_free(ar);
1130 }
1131
1132 #ifdef CONFIG_PM
1133 static int carl9170_usb_suspend(struct usb_interface *intf,
1134                                 pm_message_t message)
1135 {
1136         struct ar9170 *ar = usb_get_intfdata(intf);
1137
1138         if (!ar)
1139                 return -ENODEV;
1140
1141         carl9170_usb_cancel_urbs(ar);
1142
1143         return 0;
1144 }
1145
1146 static int carl9170_usb_resume(struct usb_interface *intf)
1147 {
1148         struct ar9170 *ar = usb_get_intfdata(intf);
1149         int err;
1150
1151         if (!ar)
1152                 return -ENODEV;
1153
1154         usb_unpoison_anchored_urbs(&ar->rx_anch);
1155         carl9170_set_state(ar, CARL9170_STOPPED);
1156
1157         /*
1158          * The USB documentation demands that [for suspend] all traffic
1159          * to and from the device has to stop. This would be fine, but
1160          * there's a catch: the device[usb phy] does not come back.
1161          *
1162          * Upon resume the firmware will "kill" itself and the
1163          * boot-code sorts out the magic voodoo.
1164          * Not very nice, but there's not much what could go wrong.
1165          */
1166         msleep(1100);
1167
1168         err = carl9170_usb_init_device(ar);
1169         if (err)
1170                 goto err_unrx;
1171
1172         return 0;
1173
1174 err_unrx:
1175         carl9170_usb_cancel_urbs(ar);
1176
1177         return err;
1178 }
1179 #endif /* CONFIG_PM */
1180
1181 static struct usb_driver carl9170_driver = {
1182         .name = KBUILD_MODNAME,
1183         .probe = carl9170_usb_probe,
1184         .disconnect = carl9170_usb_disconnect,
1185         .id_table = carl9170_usb_ids,
1186         .soft_unbind = 1,
1187 #ifdef CONFIG_PM
1188         .suspend = carl9170_usb_suspend,
1189         .resume = carl9170_usb_resume,
1190         .reset_resume = carl9170_usb_resume,
1191 #endif /* CONFIG_PM */
1192         .disable_hub_initiated_lpm = 1,
1193 };
1194
1195 module_usb_driver(carl9170_driver);