GNU Linux-libre 4.9.337-gnu1
[releases.git] / drivers / net / wireless / intel / iwlwifi / iwl-fw-file.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10  * Copyright(c) 2016        Intel Deutschland GmbH
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of version 2 of the GNU General Public License as
14  * published by the Free Software Foundation.
15  *
16  * This program is distributed in the hope that it will be useful, but
17  * WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
19  * General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24  * USA
25  *
26  * The full GNU General Public License is included in this distribution
27  * in the file called COPYING.
28  *
29  * Contact Information:
30  *  Intel Linux Wireless <linuxwifi@intel.com>
31  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
32  *
33  * BSD LICENSE
34  *
35  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
36  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37  * Copyright(c) 2016        Intel Deutschland GmbH
38  * All rights reserved.
39  *
40  * Redistribution and use in source and binary forms, with or without
41  * modification, are permitted provided that the following conditions
42  * are met:
43  *
44  *  * Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  *  * Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in
48  *    the documentation and/or other materials provided with the
49  *    distribution.
50  *  * Neither the name Intel Corporation nor the names of its
51  *    contributors may be used to endorse or promote products derived
52  *    from this software without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
65  *****************************************************************************/
66
67 #ifndef __iwl_fw_file_h__
68 #define __iwl_fw_file_h__
69
70 #include <linux/netdevice.h>
71 #include <linux/nl80211.h>
72
73 /* v1/v2 uCode file layout */
74 struct iwl_ucode_header {
75         __le32 ver;     /* major/minor/API/serial */
76         union {
77                 struct {
78                         __le32 inst_size;       /* bytes of runtime code */
79                         __le32 data_size;       /* bytes of runtime data */
80                         __le32 init_size;       /* bytes of init code */
81                         __le32 init_data_size;  /* bytes of init data */
82                         __le32 boot_size;       /* bytes of bootstrap code */
83                         u8 data[0];             /* in same order as sizes */
84                 } v1;
85                 struct {
86                         __le32 build;           /* build number */
87                         __le32 inst_size;       /* bytes of runtime code */
88                         __le32 data_size;       /* bytes of runtime data */
89                         __le32 init_size;       /* bytes of init code */
90                         __le32 init_data_size;  /* bytes of init data */
91                         __le32 boot_size;       /* bytes of bootstrap code */
92                         u8 data[0];             /* in same order as sizes */
93                 } v2;
94         } u;
95 };
96
97 /*
98  * new TLV uCode file layout
99  *
100  * The new TLV file format contains TLVs, that each specify
101  * some piece of data.
102  */
103
104 enum iwl_ucode_tlv_type {
105         IWL_UCODE_TLV_INVALID           = 0, /* unused */
106         IWL_UCODE_TLV_INST              = 1,
107         IWL_UCODE_TLV_DATA              = 2,
108         IWL_UCODE_TLV_INIT              = 3,
109         IWL_UCODE_TLV_INIT_DATA         = 4,
110         IWL_UCODE_TLV_BOOT              = 5,
111         IWL_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a u32 value */
112         IWL_UCODE_TLV_PAN               = 7,
113         IWL_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
114         IWL_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
115         IWL_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
116         IWL_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
117         IWL_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
118         IWL_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
119         IWL_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
120         IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
121         IWL_UCODE_TLV_WOWLAN_INST       = 16,
122         IWL_UCODE_TLV_WOWLAN_DATA       = 17,
123         IWL_UCODE_TLV_FLAGS             = 18,
124         IWL_UCODE_TLV_SEC_RT            = 19,
125         IWL_UCODE_TLV_SEC_INIT          = 20,
126         IWL_UCODE_TLV_SEC_WOWLAN        = 21,
127         IWL_UCODE_TLV_DEF_CALIB         = 22,
128         IWL_UCODE_TLV_PHY_SKU           = 23,
129         IWL_UCODE_TLV_SECURE_SEC_RT     = 24,
130         IWL_UCODE_TLV_SECURE_SEC_INIT   = 25,
131         IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
132         IWL_UCODE_TLV_NUM_OF_CPU        = 27,
133         IWL_UCODE_TLV_CSCHEME           = 28,
134         IWL_UCODE_TLV_API_CHANGES_SET   = 29,
135         IWL_UCODE_TLV_ENABLED_CAPABILITIES      = 30,
136         IWL_UCODE_TLV_N_SCAN_CHANNELS           = 31,
137         IWL_UCODE_TLV_PAGING            = 32,
138         IWL_UCODE_TLV_SEC_RT_USNIFFER   = 34,
139         IWL_UCODE_TLV_SDIO_ADMA_ADDR    = 35,
140         IWL_UCODE_TLV_FW_VERSION        = 36,
141         IWL_UCODE_TLV_FW_DBG_DEST       = 38,
142         IWL_UCODE_TLV_FW_DBG_CONF       = 39,
143         IWL_UCODE_TLV_FW_DBG_TRIGGER    = 40,
144         IWL_UCODE_TLV_FW_GSCAN_CAPA     = 50,
145         IWL_UCODE_TLV_FW_MEM_SEG        = 51,
146 };
147
148 struct iwl_ucode_tlv {
149         __le32 type;            /* see above */
150         __le32 length;          /* not including type/length fields */
151         u8 data[0];
152 };
153
154 #define IWL_TLV_UCODE_MAGIC             0x0a4c5749
155 #define FW_VER_HUMAN_READABLE_SZ        64
156
157 struct iwl_tlv_ucode_header {
158         /*
159          * The TLV style ucode header is distinguished from
160          * the v1/v2 style header by first four bytes being
161          * zero, as such is an invalid combination of
162          * major/minor/API/serial versions.
163          */
164         __le32 zero;
165         __le32 magic;
166         u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
167         /* major/minor/API/serial or major in new format */
168         __le32 ver;
169         __le32 build;
170         __le64 ignore;
171         /*
172          * The data contained herein has a TLV layout,
173          * see above for the TLV header and types.
174          * Note that each TLV is padded to a length
175          * that is a multiple of 4 for alignment.
176          */
177         u8 data[0];
178 };
179
180 /*
181  * ucode TLVs
182  *
183  * ability to get extension for: flags & capabilities from ucode binaries files
184  */
185 struct iwl_ucode_api {
186         __le32 api_index;
187         __le32 api_flags;
188 } __packed;
189
190 struct iwl_ucode_capa {
191         __le32 api_index;
192         __le32 api_capa;
193 } __packed;
194
195 /**
196  * enum iwl_ucode_tlv_flag - ucode API flags
197  * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
198  *      was a separate TLV but moved here to save space.
199  * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
200  *      treats good CRC threshold as a boolean
201  * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
202  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
203  * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
204  *      offload profile config command.
205  * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
206  *      (rather than two) IPv6 addresses
207  * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
208  *      from the probe request template.
209  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
210  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
211  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
212  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
213  * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
214  * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
215  */
216 enum iwl_ucode_tlv_flag {
217         IWL_UCODE_TLV_FLAGS_PAN                 = BIT(0),
218         IWL_UCODE_TLV_FLAGS_NEWSCAN             = BIT(1),
219         IWL_UCODE_TLV_FLAGS_MFP                 = BIT(2),
220         IWL_UCODE_TLV_FLAGS_SHORT_BL            = BIT(7),
221         IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS     = BIT(10),
222         IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID       = BIT(12),
223         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL    = BIT(15),
224         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE    = BIT(16),
225         IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT       = BIT(24),
226         IWL_UCODE_TLV_FLAGS_EBS_SUPPORT         = BIT(25),
227         IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD        = BIT(26),
228         IWL_UCODE_TLV_FLAGS_BCAST_FILTERING     = BIT(29),
229 };
230
231 typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
232
233 /**
234  * enum iwl_ucode_tlv_api - ucode api
235  * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
236  *      longer than the passive one, which is essential for fragmented scan.
237  * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
238  * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
239  * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
240  * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan
241  *      iteration complete notification, and the timestamp reported for RX
242  *      received during scan, are reported in TSF of the mac specified in the
243  *      scan request.
244  *
245  * @NUM_IWL_UCODE_TLV_API: number of bits used
246  */
247 enum iwl_ucode_tlv_api {
248         IWL_UCODE_TLV_API_FRAGMENTED_SCAN       = (__force iwl_ucode_tlv_api_t)8,
249         IWL_UCODE_TLV_API_WIFI_MCC_UPDATE       = (__force iwl_ucode_tlv_api_t)9,
250         IWL_UCODE_TLV_API_LQ_SS_PARAMS          = (__force iwl_ucode_tlv_api_t)18,
251         IWL_UCODE_TLV_API_NEW_VERSION           = (__force iwl_ucode_tlv_api_t)20,
252         IWL_UCODE_TLV_API_SCAN_TSF_REPORT       = (__force iwl_ucode_tlv_api_t)28,
253
254         NUM_IWL_UCODE_TLV_API
255 #ifdef __CHECKER__
256                 /* sparse says it cannot increment the previous enum member */
257                 = 128
258 #endif
259 };
260
261 typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
262
263 /**
264  * enum iwl_ucode_tlv_capa - ucode capabilities
265  * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
266  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
267  * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
268  * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
269  * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
270  * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
271  * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
272  *      tx power value into TPC Report action frame and Link Measurement Report
273  *      action frame
274  * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
275  *      channel in DS parameter set element in probe requests.
276  * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
277  *      probe requests.
278  * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
279  * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
280  *      which also implies support for the scheduler configuration command
281  * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
282  * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
283  * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
284  * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
285  * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
286  * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
287  * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it
288  *      is standalone or with a BSS station interface in the same binding.
289  * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
290  * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
291  *      sources for the MCC. This TLV bit is a future replacement to
292  *      IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
293  *      is supported.
294  * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
295  * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
296  * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
297  * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
298  * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
299  * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA
300  *      countdown offloading. Beacon notifications are not sent to the host.
301  *      The fw also offloads TBTT alignment.
302  * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
303  *      antenna the beacon should be transmitted
304  * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
305  *      from AP and will send it upon d0i3 exit.
306  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
307  * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
308  * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
309  *      thresholds reporting
310  * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
311  * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
312  *      regular image.
313  * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
314  *      memory addresses from the firmware.
315  * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
316  * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
317  *      command size (command version 4) that supports toggling ACK TX
318  *      power reduction.
319  *
320  * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
321  */
322 enum iwl_ucode_tlv_capa {
323         IWL_UCODE_TLV_CAPA_D0I3_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)0,
324         IWL_UCODE_TLV_CAPA_LAR_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)1,
325         IWL_UCODE_TLV_CAPA_UMAC_SCAN                    = (__force iwl_ucode_tlv_capa_t)2,
326         IWL_UCODE_TLV_CAPA_BEAMFORMER                   = (__force iwl_ucode_tlv_capa_t)3,
327         IWL_UCODE_TLV_CAPA_TOF_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)5,
328         IWL_UCODE_TLV_CAPA_TDLS_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)6,
329         IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT    = (__force iwl_ucode_tlv_capa_t)8,
330         IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT      = (__force iwl_ucode_tlv_capa_t)9,
331         IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT       = (__force iwl_ucode_tlv_capa_t)10,
332         IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT         = (__force iwl_ucode_tlv_capa_t)11,
333         IWL_UCODE_TLV_CAPA_DQA_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)12,
334         IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH          = (__force iwl_ucode_tlv_capa_t)13,
335         IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG            = (__force iwl_ucode_tlv_capa_t)17,
336         IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT              = (__force iwl_ucode_tlv_capa_t)18,
337         IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT         = (__force iwl_ucode_tlv_capa_t)19,
338         IWL_UCODE_TLV_CAPA_CSUM_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)21,
339         IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS           = (__force iwl_ucode_tlv_capa_t)22,
340         IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD                = (__force iwl_ucode_tlv_capa_t)26,
341         IWL_UCODE_TLV_CAPA_BT_COEX_PLCR                 = (__force iwl_ucode_tlv_capa_t)28,
342         IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC                = (__force iwl_ucode_tlv_capa_t)29,
343         IWL_UCODE_TLV_CAPA_BT_COEX_RRC                  = (__force iwl_ucode_tlv_capa_t)30,
344         IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT                = (__force iwl_ucode_tlv_capa_t)31,
345         IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE         = (__force iwl_ucode_tlv_capa_t)64,
346         IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS            = (__force iwl_ucode_tlv_capa_t)65,
347         IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT             = (__force iwl_ucode_tlv_capa_t)67,
348         IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT       = (__force iwl_ucode_tlv_capa_t)68,
349         IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD         = (__force iwl_ucode_tlv_capa_t)70,
350         IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION         = (__force iwl_ucode_tlv_capa_t)71,
351         IWL_UCODE_TLV_CAPA_BEACON_STORING               = (__force iwl_ucode_tlv_capa_t)72,
352         IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2               = (__force iwl_ucode_tlv_capa_t)73,
353         IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW                = (__force iwl_ucode_tlv_capa_t)74,
354         IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT      = (__force iwl_ucode_tlv_capa_t)75,
355         IWL_UCODE_TLV_CAPA_CTDP_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)76,
356         IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED             = (__force iwl_ucode_tlv_capa_t)77,
357         IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG        = (__force iwl_ucode_tlv_capa_t)80,
358         IWL_UCODE_TLV_CAPA_LQM_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)81,
359         IWL_UCODE_TLV_CAPA_TX_POWER_ACK                 = (__force iwl_ucode_tlv_capa_t)84,
360
361         NUM_IWL_UCODE_TLV_CAPA
362 #ifdef __CHECKER__
363                 /* sparse says it cannot increment the previous enum member */
364                 = 128
365 #endif
366 };
367
368 /* The default calibrate table size if not specified by firmware file */
369 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE     18
370 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE         19
371 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE                  253
372
373 /* The default max probe length if not specified by the firmware file */
374 #define IWL_DEFAULT_MAX_PROBE_LENGTH    200
375
376 /*
377  * For 16.0 uCode and above, there is no differentiation between sections,
378  * just an offset to the HW address.
379  */
380 #define IWL_UCODE_SECTION_MAX 16
381 #define CPU1_CPU2_SEPARATOR_SECTION     0xFFFFCCCC
382 #define PAGING_SEPARATOR_SECTION        0xAAAABBBB
383
384 /* uCode version contains 4 values: Major/Minor/API/Serial */
385 #define IWL_UCODE_MAJOR(ver)    (((ver) & 0xFF000000) >> 24)
386 #define IWL_UCODE_MINOR(ver)    (((ver) & 0x00FF0000) >> 16)
387 #define IWL_UCODE_API(ver)      (((ver) & 0x0000FF00) >> 8)
388 #define IWL_UCODE_SERIAL(ver)   ((ver) & 0x000000FF)
389
390 /*
391  * Calibration control struct.
392  * Sent as part of the phy configuration command.
393  * @flow_trigger: bitmap for which calibrations to perform according to
394  *              flow triggers.
395  * @event_trigger: bitmap for which calibrations to perform according to
396  *              event triggers.
397  */
398 struct iwl_tlv_calib_ctrl {
399         __le32 flow_trigger;
400         __le32 event_trigger;
401 } __packed;
402
403 enum iwl_fw_phy_cfg {
404         FW_PHY_CFG_RADIO_TYPE_POS = 0,
405         FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
406         FW_PHY_CFG_RADIO_STEP_POS = 2,
407         FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
408         FW_PHY_CFG_RADIO_DASH_POS = 4,
409         FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
410         FW_PHY_CFG_TX_CHAIN_POS = 16,
411         FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
412         FW_PHY_CFG_RX_CHAIN_POS = 20,
413         FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
414 };
415
416 #define IWL_UCODE_MAX_CS                1
417
418 /**
419  * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
420  * @cipher: a cipher suite selector
421  * @flags: cipher scheme flags (currently reserved for a future use)
422  * @hdr_len: a size of MPDU security header
423  * @pn_len: a size of PN
424  * @pn_off: an offset of pn from the beginning of the security header
425  * @key_idx_off: an offset of key index byte in the security header
426  * @key_idx_mask: a bit mask of key_idx bits
427  * @key_idx_shift: bit shift needed to get key_idx
428  * @mic_len: mic length in bytes
429  * @hw_cipher: a HW cipher index used in host commands
430  */
431 struct iwl_fw_cipher_scheme {
432         __le32 cipher;
433         u8 flags;
434         u8 hdr_len;
435         u8 pn_len;
436         u8 pn_off;
437         u8 key_idx_off;
438         u8 key_idx_mask;
439         u8 key_idx_shift;
440         u8 mic_len;
441         u8 hw_cipher;
442 } __packed;
443
444 enum iwl_fw_dbg_reg_operator {
445         CSR_ASSIGN,
446         CSR_SETBIT,
447         CSR_CLEARBIT,
448
449         PRPH_ASSIGN,
450         PRPH_SETBIT,
451         PRPH_CLEARBIT,
452
453         INDIRECT_ASSIGN,
454         INDIRECT_SETBIT,
455         INDIRECT_CLEARBIT,
456
457         PRPH_BLOCKBIT,
458 };
459
460 /**
461  * struct iwl_fw_dbg_reg_op - an operation on a register
462  *
463  * @op: %enum iwl_fw_dbg_reg_operator
464  * @addr: offset of the register
465  * @val: value
466  */
467 struct iwl_fw_dbg_reg_op {
468         u8 op;
469         u8 reserved[3];
470         __le32 addr;
471         __le32 val;
472 } __packed;
473
474 /**
475  * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
476  *
477  * @SMEM_MODE: monitor stores the data in SMEM
478  * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
479  * @MARBH_MODE: monitor stores the data in MARBH buffer
480  * @MIPI_MODE: monitor outputs the data through the MIPI interface
481  */
482 enum iwl_fw_dbg_monitor_mode {
483         SMEM_MODE = 0,
484         EXTERNAL_MODE = 1,
485         MARBH_MODE = 2,
486         MIPI_MODE = 3,
487 };
488
489 /**
490  * enum iwl_fw_mem_seg_type - data types for dumping on error
491  *
492  * @FW_DBG_MEM_SMEM: the data type is SMEM
493  * @FW_DBG_MEM_DCCM_LMAC: the data type is DCCM_LMAC
494  * @FW_DBG_MEM_DCCM_UMAC: the data type is DCCM_UMAC
495  */
496 enum iwl_fw_dbg_mem_seg_type {
497         FW_DBG_MEM_DCCM_LMAC = 0,
498         FW_DBG_MEM_DCCM_UMAC,
499         FW_DBG_MEM_SMEM,
500
501         /* Must be last */
502         FW_DBG_MEM_MAX,
503 };
504
505 /**
506  * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments
507  *
508  * @data_type: enum %iwl_fw_mem_seg_type
509  * @ofs: the memory segment offset
510  * @len: the memory segment length, in bytes
511  *
512  * This parses IWL_UCODE_TLV_FW_MEM_SEG
513  */
514 struct iwl_fw_dbg_mem_seg_tlv {
515         __le32 data_type;
516         __le32 ofs;
517         __le32 len;
518 } __packed;
519
520 /**
521  * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
522  *
523  * @version: version of the TLV - currently 0
524  * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
525  * @size_power: buffer size will be 2^(size_power + 11)
526  * @base_reg: addr of the base addr register (PRPH)
527  * @end_reg:  addr of the end addr register (PRPH)
528  * @write_ptr_reg: the addr of the reg of the write pointer
529  * @wrap_count: the addr of the reg of the wrap_count
530  * @base_shift: shift right of the base addr reg
531  * @end_shift: shift right of the end addr reg
532  * @reg_ops: array of registers operations
533  *
534  * This parses IWL_UCODE_TLV_FW_DBG_DEST
535  */
536 struct iwl_fw_dbg_dest_tlv {
537         u8 version;
538         u8 monitor_mode;
539         u8 size_power;
540         u8 reserved;
541         __le32 base_reg;
542         __le32 end_reg;
543         __le32 write_ptr_reg;
544         __le32 wrap_count;
545         u8 base_shift;
546         u8 end_shift;
547         struct iwl_fw_dbg_reg_op reg_ops[0];
548 } __packed;
549
550 struct iwl_fw_dbg_conf_hcmd {
551         u8 id;
552         u8 reserved;
553         __le16 len;
554         u8 data[0];
555 } __packed;
556
557 /**
558  * enum iwl_fw_dbg_trigger_mode - triggers functionalities
559  *
560  * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
561  * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
562  * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
563  *      collect only monitor data
564  */
565 enum iwl_fw_dbg_trigger_mode {
566         IWL_FW_DBG_TRIGGER_START = BIT(0),
567         IWL_FW_DBG_TRIGGER_STOP = BIT(1),
568         IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
569 };
570
571 /**
572  * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
573  * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
574  * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
575  * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
576  * @IWL_FW_DBG_CONF_VIF_AP: AP mode
577  * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
578  * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
579  * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
580  */
581 enum iwl_fw_dbg_trigger_vif_type {
582         IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
583         IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
584         IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
585         IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
586         IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
587         IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
588         IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
589 };
590
591 /**
592  * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
593  * @id: %enum iwl_fw_dbg_trigger
594  * @vif_type: %enum iwl_fw_dbg_trigger_vif_type
595  * @stop_conf_ids: bitmap of configurations this trigger relates to.
596  *      if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
597  *      to the currently running configuration is set, the data should be
598  *      collected.
599  * @stop_delay: how many milliseconds to wait before collecting the data
600  *      after the STOP trigger fires.
601  * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
602  * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
603  *      configuration should be applied when the triggers kicks in.
604  * @occurrences: number of occurrences. 0 means the trigger will never fire.
605  * @trig_dis_ms: the time, in milliseconds, after an occurrence of this
606  *      trigger in which another occurrence should be ignored.
607  */
608 struct iwl_fw_dbg_trigger_tlv {
609         __le32 id;
610         __le32 vif_type;
611         __le32 stop_conf_ids;
612         __le32 stop_delay;
613         u8 mode;
614         u8 start_conf_id;
615         __le16 occurrences;
616         __le16 trig_dis_ms;
617         __le16 reserved[3];
618
619         u8 data[0];
620 } __packed;
621
622 #define FW_DBG_START_FROM_ALIVE 0
623 #define FW_DBG_CONF_MAX         32
624 #define FW_DBG_INVALID          0xff
625
626 /**
627  * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
628  * @stop_consec_missed_bcon: stop recording if threshold is crossed.
629  * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
630  * @start_consec_missed_bcon: start recording if threshold is crossed.
631  * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
632  * @reserved1: reserved
633  * @reserved2: reserved
634  */
635 struct iwl_fw_dbg_trigger_missed_bcon {
636         __le32 stop_consec_missed_bcon;
637         __le32 stop_consec_missed_bcon_since_rx;
638         __le32 reserved2[2];
639         __le32 start_consec_missed_bcon;
640         __le32 start_consec_missed_bcon_since_rx;
641         __le32 reserved1[2];
642 } __packed;
643
644 /**
645  * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
646  * cmds: the list of commands to trigger the collection on
647  */
648 struct iwl_fw_dbg_trigger_cmd {
649         struct cmd {
650                 u8 cmd_id;
651                 u8 group_id;
652         } __packed cmds[16];
653 } __packed;
654
655 /**
656  * iwl_fw_dbg_trigger_stats - configures trigger for statistics
657  * @stop_offset: the offset of the value to be monitored
658  * @stop_threshold: the threshold above which to collect
659  * @start_offset: the offset of the value to be monitored
660  * @start_threshold: the threshold above which to start recording
661  */
662 struct iwl_fw_dbg_trigger_stats {
663         __le32 stop_offset;
664         __le32 stop_threshold;
665         __le32 start_offset;
666         __le32 start_threshold;
667 } __packed;
668
669 /**
670  * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
671  * @rssi: RSSI value to trigger at
672  */
673 struct iwl_fw_dbg_trigger_low_rssi {
674         __le32 rssi;
675 } __packed;
676
677 /**
678  * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
679  * @stop_auth_denied: number of denied authentication to collect
680  * @stop_auth_timeout: number of authentication timeout to collect
681  * @stop_rx_deauth: number of Rx deauth before to collect
682  * @stop_tx_deauth: number of Tx deauth before to collect
683  * @stop_assoc_denied: number of denied association to collect
684  * @stop_assoc_timeout: number of association timeout to collect
685  * @stop_connection_loss: number of connection loss to collect
686  * @start_auth_denied: number of denied authentication to start recording
687  * @start_auth_timeout: number of authentication timeout to start recording
688  * @start_rx_deauth: number of Rx deauth to start recording
689  * @start_tx_deauth: number of Tx deauth to start recording
690  * @start_assoc_denied: number of denied association to start recording
691  * @start_assoc_timeout: number of association timeout to start recording
692  * @start_connection_loss: number of connection loss to start recording
693  */
694 struct iwl_fw_dbg_trigger_mlme {
695         u8 stop_auth_denied;
696         u8 stop_auth_timeout;
697         u8 stop_rx_deauth;
698         u8 stop_tx_deauth;
699
700         u8 stop_assoc_denied;
701         u8 stop_assoc_timeout;
702         u8 stop_connection_loss;
703         u8 reserved;
704
705         u8 start_auth_denied;
706         u8 start_auth_timeout;
707         u8 start_rx_deauth;
708         u8 start_tx_deauth;
709
710         u8 start_assoc_denied;
711         u8 start_assoc_timeout;
712         u8 start_connection_loss;
713         u8 reserved2;
714 } __packed;
715
716 /**
717  * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
718  * @command_queue: timeout for the command queue in ms
719  * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
720  * @softap: timeout for the queues of a softAP in ms
721  * @p2p_go: timeout for the queues of a P2P GO in ms
722  * @p2p_client: timeout for the queues of a P2P client in ms
723  * @p2p_device: timeout for the queues of a P2P device in ms
724  * @ibss: timeout for the queues of an IBSS in ms
725  * @tdls: timeout for the queues of a TDLS station in ms
726  */
727 struct iwl_fw_dbg_trigger_txq_timer {
728         __le32 command_queue;
729         __le32 bss;
730         __le32 softap;
731         __le32 p2p_go;
732         __le32 p2p_client;
733         __le32 p2p_device;
734         __le32 ibss;
735         __le32 tdls;
736         __le32 reserved[4];
737 } __packed;
738
739 /**
740  * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
741  * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
742  *      trigger each time a time event notification that relates to time event
743  *      id with one of the actions in the bitmap is received and
744  *      BIT(notif->status) is set in status_bitmap.
745  *
746  */
747 struct iwl_fw_dbg_trigger_time_event {
748         struct {
749                 __le32 id;
750                 __le32 action_bitmap;
751                 __le32 status_bitmap;
752         } __packed time_events[16];
753 } __packed;
754
755 /**
756  * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
757  * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
758  *      when an Rx BlockAck session is started.
759  * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
760  *      when an Rx BlockAck session is stopped.
761  * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
762  *      when a Tx BlockAck session is started.
763  * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
764  *      when a Tx BlockAck session is stopped.
765  * rx_bar: tid bitmap to configure on what tid the trigger should occur
766  *      when a BAR is received (for a Tx BlockAck session).
767  * tx_bar: tid bitmap to configure on what tid the trigger should occur
768  *      when a BAR is send (for an Rx BlocAck session).
769  * frame_timeout: tid bitmap to configure on what tid the trigger should occur
770  *      when a frame times out in the reodering buffer.
771  */
772 struct iwl_fw_dbg_trigger_ba {
773         __le16 rx_ba_start;
774         __le16 rx_ba_stop;
775         __le16 tx_ba_start;
776         __le16 tx_ba_stop;
777         __le16 rx_bar;
778         __le16 tx_bar;
779         __le16 frame_timeout;
780 } __packed;
781
782 /**
783  * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events.
784  * @action_bitmap: the TDLS action to trigger the collection upon
785  * @peer_mode: trigger on specific peer or all
786  * @peer: the TDLS peer to trigger the collection on
787  */
788 struct iwl_fw_dbg_trigger_tdls {
789         u8 action_bitmap;
790         u8 peer_mode;
791         u8 peer[ETH_ALEN];
792         u8 reserved[4];
793 } __packed;
794
795 /**
796  * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response
797  *  status.
798  * @statuses: the list of statuses to trigger the collection on
799  */
800 struct iwl_fw_dbg_trigger_tx_status {
801         struct tx_status {
802                 u8 status;
803                 u8 reserved[3];
804         } __packed statuses[16];
805         __le32 reserved[2];
806 } __packed;
807
808 /**
809  * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
810  * @id: conf id
811  * @usniffer: should the uSniffer image be used
812  * @num_of_hcmds: how many HCMDs to send are present here
813  * @hcmd: a variable length host command to be sent to apply the configuration.
814  *      If there is more than one HCMD to send, they will appear one after the
815  *      other and be sent in the order that they appear in.
816  * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
817  * %FW_DBG_CONF_MAX configuration per run.
818  */
819 struct iwl_fw_dbg_conf_tlv {
820         u8 id;
821         u8 usniffer;
822         u8 reserved;
823         u8 num_of_hcmds;
824         struct iwl_fw_dbg_conf_hcmd hcmd;
825 } __packed;
826
827 /**
828  * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
829  * @max_scan_cache_size: total space allocated for scan results (in bytes).
830  * @max_scan_buckets: maximum number of channel buckets.
831  * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
832  * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
833  * @max_scan_reporting_threshold: max possible report threshold. in percentage.
834  * @max_hotlist_aps: maximum number of entries for hotlist APs.
835  * @max_significant_change_aps: maximum number of entries for significant
836  *      change APs.
837  * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
838  *      hold.
839  * @max_hotlist_ssids: maximum number of entries for hotlist SSIDs.
840  * @max_number_epno_networks: max number of epno entries.
841  * @max_number_epno_networks_by_ssid: max number of epno entries if ssid is
842  *      specified.
843  * @max_number_of_white_listed_ssid: max number of white listed SSIDs.
844  * @max_number_of_black_listed_ssid: max number of black listed SSIDs.
845  */
846 struct iwl_fw_gscan_capabilities {
847         __le32 max_scan_cache_size;
848         __le32 max_scan_buckets;
849         __le32 max_ap_cache_per_scan;
850         __le32 max_rssi_sample_size;
851         __le32 max_scan_reporting_threshold;
852         __le32 max_hotlist_aps;
853         __le32 max_significant_change_aps;
854         __le32 max_bssid_history_entries;
855         __le32 max_hotlist_ssids;
856         __le32 max_number_epno_networks;
857         __le32 max_number_epno_networks_by_ssid;
858         __le32 max_number_of_white_listed_ssid;
859         __le32 max_number_of_black_listed_ssid;
860 } __packed;
861
862 #endif  /* __iwl_fw_file_h__ */