GNU Linux-libre 4.9.309-gnu1
[releases.git] / drivers / net / wireless / intel / iwlwifi / mvm / fw-api.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10  * Copyright(c) 2016        Intel Deutschland GmbH
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of version 2 of the GNU General Public License as
14  * published by the Free Software Foundation.
15  *
16  * This program is distributed in the hope that it will be useful, but
17  * WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
19  * General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24  * USA
25  *
26  * The full GNU General Public License is included in this distribution
27  * in the file called COPYING.
28  *
29  * Contact Information:
30  *  Intel Linux Wireless <linuxwifi@intel.com>
31  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
32  *
33  * BSD LICENSE
34  *
35  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
36  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37  * Copyright(c) 2016        Intel Deutschland GmbH
38  * All rights reserved.
39  *
40  * Redistribution and use in source and binary forms, with or without
41  * modification, are permitted provided that the following conditions
42  * are met:
43  *
44  *  * Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  *  * Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in
48  *    the documentation and/or other materials provided with the
49  *    distribution.
50  *  * Neither the name Intel Corporation nor the names of its
51  *    contributors may be used to endorse or promote products derived
52  *    from this software without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
65  *
66  *****************************************************************************/
67
68 #ifndef __fw_api_h__
69 #define __fw_api_h__
70
71 #include "fw-api-rs.h"
72 #include "fw-api-rx.h"
73 #include "fw-api-tx.h"
74 #include "fw-api-sta.h"
75 #include "fw-api-mac.h"
76 #include "fw-api-power.h"
77 #include "fw-api-d3.h"
78 #include "fw-api-coex.h"
79 #include "fw-api-scan.h"
80 #include "fw-api-stats.h"
81 #include "fw-api-tof.h"
82
83 /* Tx queue numbers for non-DQA mode */
84 enum {
85         IWL_MVM_OFFCHANNEL_QUEUE = 8,
86         IWL_MVM_CMD_QUEUE = 9,
87 };
88
89 /*
90  * DQA queue numbers
91  *
92  * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW
93  * @IWL_MVM_DQA_AUX_QUEUE: a queue reserved for aux frames
94  * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames
95  * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames
96  * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure
97  *      that we are never left without the possibility to connect to an AP.
98  * @IWL_MVM_DQA_MIN_MGMT_QUEUE: first TXQ in pool for MGMT and non-QOS frames.
99  *      Each MGMT queue is mapped to a single STA
100  *      MGMT frames are frames that return true on ieee80211_is_mgmt()
101  * @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames
102  * @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe
103  *      responses
104  * @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames.
105  *      DATA frames are intended for !ieee80211_is_mgmt() frames, but if
106  *      the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues
107  *      as well
108  * @IWL_MVM_DQA_MAX_DATA_QUEUE: last TXQ in pool for DATA frames
109  */
110 enum iwl_mvm_dqa_txq {
111         IWL_MVM_DQA_CMD_QUEUE = 0,
112         IWL_MVM_DQA_AUX_QUEUE = 1,
113         IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2,
114         IWL_MVM_DQA_GCAST_QUEUE = 3,
115         IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4,
116         IWL_MVM_DQA_MIN_MGMT_QUEUE = 5,
117         IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
118         IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
119         IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
120         IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
121 };
122
123 enum iwl_mvm_tx_fifo {
124         IWL_MVM_TX_FIFO_BK = 0,
125         IWL_MVM_TX_FIFO_BE,
126         IWL_MVM_TX_FIFO_VI,
127         IWL_MVM_TX_FIFO_VO,
128         IWL_MVM_TX_FIFO_MCAST = 5,
129         IWL_MVM_TX_FIFO_CMD = 7,
130 };
131
132
133 /* commands */
134 enum {
135         MVM_ALIVE = 0x1,
136         REPLY_ERROR = 0x2,
137         ECHO_CMD = 0x3,
138
139         INIT_COMPLETE_NOTIF = 0x4,
140
141         /* PHY context commands */
142         PHY_CONTEXT_CMD = 0x8,
143         DBG_CFG = 0x9,
144         ANTENNA_COUPLING_NOTIFICATION = 0xa,
145
146         /* UMAC scan commands */
147         SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
148         SCAN_CFG_CMD = 0xc,
149         SCAN_REQ_UMAC = 0xd,
150         SCAN_ABORT_UMAC = 0xe,
151         SCAN_COMPLETE_UMAC = 0xf,
152
153         BA_WINDOW_STATUS_NOTIFICATION_ID = 0x13,
154
155         /* station table */
156         ADD_STA_KEY = 0x17,
157         ADD_STA = 0x18,
158         REMOVE_STA = 0x19,
159
160         /* paging get item */
161         FW_GET_ITEM_CMD = 0x1a,
162
163         /* TX */
164         TX_CMD = 0x1c,
165         TXPATH_FLUSH = 0x1e,
166         MGMT_MCAST_KEY = 0x1f,
167
168         /* scheduler config */
169         SCD_QUEUE_CFG = 0x1d,
170
171         /* global key */
172         WEP_KEY = 0x20,
173
174         /* Memory */
175         SHARED_MEM_CFG = 0x25,
176
177         /* TDLS */
178         TDLS_CHANNEL_SWITCH_CMD = 0x27,
179         TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
180         TDLS_CONFIG_CMD = 0xa7,
181
182         /* MAC and Binding commands */
183         MAC_CONTEXT_CMD = 0x28,
184         TIME_EVENT_CMD = 0x29, /* both CMD and response */
185         TIME_EVENT_NOTIFICATION = 0x2a,
186         BINDING_CONTEXT_CMD = 0x2b,
187         TIME_QUOTA_CMD = 0x2c,
188         NON_QOS_TX_COUNTER_CMD = 0x2d,
189
190         LQ_CMD = 0x4e,
191
192         /* paging block to FW cpu2 */
193         FW_PAGING_BLOCK_CMD = 0x4f,
194
195         /* Scan offload */
196         SCAN_OFFLOAD_REQUEST_CMD = 0x51,
197         SCAN_OFFLOAD_ABORT_CMD = 0x52,
198         HOT_SPOT_CMD = 0x53,
199         SCAN_OFFLOAD_COMPLETE = 0x6D,
200         SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
201         SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
202         MATCH_FOUND_NOTIFICATION = 0xd9,
203         SCAN_ITERATION_COMPLETE = 0xe7,
204
205         /* Phy */
206         PHY_CONFIGURATION_CMD = 0x6a,
207         CALIB_RES_NOTIF_PHY_DB = 0x6b,
208         PHY_DB_CMD = 0x6c,
209
210         /* ToF - 802.11mc FTM */
211         TOF_CMD = 0x10,
212         TOF_NOTIFICATION = 0x11,
213
214         /* Power - legacy power table command */
215         POWER_TABLE_CMD = 0x77,
216         PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
217         LTR_CONFIG = 0xee,
218
219         /* Thermal Throttling*/
220         REPLY_THERMAL_MNG_BACKOFF = 0x7e,
221
222         /* Set/Get DC2DC frequency tune */
223         DC2DC_CONFIG_CMD = 0x83,
224
225         /* NVM */
226         NVM_ACCESS_CMD = 0x88,
227
228         SET_CALIB_DEFAULT_CMD = 0x8e,
229
230         BEACON_NOTIFICATION = 0x90,
231         BEACON_TEMPLATE_CMD = 0x91,
232         TX_ANT_CONFIGURATION_CMD = 0x98,
233         STATISTICS_CMD = 0x9c,
234         STATISTICS_NOTIFICATION = 0x9d,
235         EOSP_NOTIFICATION = 0x9e,
236         REDUCE_TX_POWER_CMD = 0x9f,
237
238         /* RF-KILL commands and notifications */
239         CARD_STATE_CMD = 0xa0,
240         CARD_STATE_NOTIFICATION = 0xa1,
241
242         MISSED_BEACONS_NOTIFICATION = 0xa2,
243
244         /* Power - new power table command */
245         MAC_PM_POWER_TABLE = 0xa9,
246
247         MFUART_LOAD_NOTIFICATION = 0xb1,
248
249         RSS_CONFIG_CMD = 0xb3,
250
251         REPLY_RX_PHY_CMD = 0xc0,
252         REPLY_RX_MPDU_CMD = 0xc1,
253         FRAME_RELEASE = 0xc3,
254         BA_NOTIF = 0xc5,
255
256         /* Location Aware Regulatory */
257         MCC_UPDATE_CMD = 0xc8,
258         MCC_CHUB_UPDATE_CMD = 0xc9,
259
260         MARKER_CMD = 0xcb,
261
262         /* BT Coex */
263         BT_COEX_PRIO_TABLE = 0xcc,
264         BT_COEX_PROT_ENV = 0xcd,
265         BT_PROFILE_NOTIFICATION = 0xce,
266         BT_CONFIG = 0x9b,
267         BT_COEX_UPDATE_SW_BOOST = 0x5a,
268         BT_COEX_UPDATE_CORUN_LUT = 0x5b,
269         BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
270         BT_COEX_CI = 0x5d,
271
272         REPLY_SF_CFG_CMD = 0xd1,
273         REPLY_BEACON_FILTERING_CMD = 0xd2,
274
275         /* DTS measurements */
276         CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
277         DTS_MEASUREMENT_NOTIFICATION = 0xdd,
278
279         REPLY_DEBUG_CMD = 0xf0,
280         LDBG_CONFIG_CMD = 0xf6,
281         DEBUG_LOG_MSG = 0xf7,
282
283         BCAST_FILTER_CMD = 0xcf,
284         MCAST_FILTER_CMD = 0xd0,
285
286         /* D3 commands/notifications */
287         D3_CONFIG_CMD = 0xd3,
288         PROT_OFFLOAD_CONFIG_CMD = 0xd4,
289         OFFLOADS_QUERY_CMD = 0xd5,
290         REMOTE_WAKE_CONFIG_CMD = 0xd6,
291         D0I3_END_CMD = 0xed,
292
293         /* for WoWLAN in particular */
294         WOWLAN_PATTERNS = 0xe0,
295         WOWLAN_CONFIGURATION = 0xe1,
296         WOWLAN_TSC_RSC_PARAM = 0xe2,
297         WOWLAN_TKIP_PARAM = 0xe3,
298         WOWLAN_KEK_KCK_MATERIAL = 0xe4,
299         WOWLAN_GET_STATUSES = 0xe5,
300         WOWLAN_TX_POWER_PER_DB = 0xe6,
301
302         /* and for NetDetect */
303         SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56,
304         SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58,
305         SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59,
306
307         REPLY_MAX = 0xff,
308 };
309
310 /* Please keep this enum *SORTED* by hex value.
311  * Needed for binary search, otherwise a warning will be triggered.
312  */
313 enum iwl_mac_conf_subcmd_ids {
314         LINK_QUALITY_MEASUREMENT_CMD = 0x1,
315         LINK_QUALITY_MEASUREMENT_COMPLETE_NOTIF = 0xFE,
316         CHANNEL_SWITCH_NOA_NOTIF = 0xFF,
317 };
318
319 enum iwl_phy_ops_subcmd_ids {
320         CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
321         CTDP_CONFIG_CMD = 0x03,
322         TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
323         CT_KILL_NOTIFICATION = 0xFE,
324         DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
325 };
326
327 enum iwl_system_subcmd_ids {
328         SHARED_MEM_CFG_CMD = 0x0,
329 };
330
331 enum iwl_data_path_subcmd_ids {
332         DQA_ENABLE_CMD = 0x0,
333         UPDATE_MU_GROUPS_CMD = 0x1,
334         TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2,
335         MU_GROUP_MGMT_NOTIF = 0xFE,
336         RX_QUEUES_NOTIFICATION = 0xFF,
337 };
338
339 enum iwl_prot_offload_subcmd_ids {
340         STORED_BEACON_NTF = 0xFF,
341 };
342
343 enum iwl_fmac_debug_cmds {
344         LMAC_RD_WR = 0x0,
345         UMAC_RD_WR = 0x1,
346 };
347
348 /* command groups */
349 enum {
350         LEGACY_GROUP = 0x0,
351         LONG_GROUP = 0x1,
352         SYSTEM_GROUP = 0x2,
353         MAC_CONF_GROUP = 0x3,
354         PHY_OPS_GROUP = 0x4,
355         DATA_PATH_GROUP = 0x5,
356         PROT_OFFLOAD_GROUP = 0xb,
357         DEBUG_GROUP = 0xf,
358 };
359
360 /**
361  * struct iwl_cmd_response - generic response struct for most commands
362  * @status: status of the command asked, changes for each one
363  */
364 struct iwl_cmd_response {
365         __le32 status;
366 };
367
368 /*
369  * struct iwl_dqa_enable_cmd
370  * @cmd_queue: the TXQ number of the command queue
371  */
372 struct iwl_dqa_enable_cmd {
373         __le32 cmd_queue;
374 } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */
375
376 /*
377  * struct iwl_tx_ant_cfg_cmd
378  * @valid: valid antenna configuration
379  */
380 struct iwl_tx_ant_cfg_cmd {
381         __le32 valid;
382 } __packed;
383
384 /*
385  * Calibration control struct.
386  * Sent as part of the phy configuration command.
387  * @flow_trigger: bitmap for which calibrations to perform according to
388  *              flow triggers.
389  * @event_trigger: bitmap for which calibrations to perform according to
390  *              event triggers.
391  */
392 struct iwl_calib_ctrl {
393         __le32 flow_trigger;
394         __le32 event_trigger;
395 } __packed;
396
397 /* This enum defines the bitmap of various calibrations to enable in both
398  * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
399  */
400 enum iwl_calib_cfg {
401         IWL_CALIB_CFG_XTAL_IDX                  = BIT(0),
402         IWL_CALIB_CFG_TEMPERATURE_IDX           = BIT(1),
403         IWL_CALIB_CFG_VOLTAGE_READ_IDX          = BIT(2),
404         IWL_CALIB_CFG_PAPD_IDX                  = BIT(3),
405         IWL_CALIB_CFG_TX_PWR_IDX                = BIT(4),
406         IWL_CALIB_CFG_DC_IDX                    = BIT(5),
407         IWL_CALIB_CFG_BB_FILTER_IDX             = BIT(6),
408         IWL_CALIB_CFG_LO_LEAKAGE_IDX            = BIT(7),
409         IWL_CALIB_CFG_TX_IQ_IDX                 = BIT(8),
410         IWL_CALIB_CFG_TX_IQ_SKEW_IDX            = BIT(9),
411         IWL_CALIB_CFG_RX_IQ_IDX                 = BIT(10),
412         IWL_CALIB_CFG_RX_IQ_SKEW_IDX            = BIT(11),
413         IWL_CALIB_CFG_SENSITIVITY_IDX           = BIT(12),
414         IWL_CALIB_CFG_CHAIN_NOISE_IDX           = BIT(13),
415         IWL_CALIB_CFG_DISCONNECTED_ANT_IDX      = BIT(14),
416         IWL_CALIB_CFG_ANT_COUPLING_IDX          = BIT(15),
417         IWL_CALIB_CFG_DAC_IDX                   = BIT(16),
418         IWL_CALIB_CFG_ABS_IDX                   = BIT(17),
419         IWL_CALIB_CFG_AGC_IDX                   = BIT(18),
420 };
421
422 /*
423  * Phy configuration command.
424  */
425 struct iwl_phy_cfg_cmd {
426         __le32  phy_cfg;
427         struct iwl_calib_ctrl calib_control;
428 } __packed;
429
430 #define PHY_CFG_RADIO_TYPE      (BIT(0) | BIT(1))
431 #define PHY_CFG_RADIO_STEP      (BIT(2) | BIT(3))
432 #define PHY_CFG_RADIO_DASH      (BIT(4) | BIT(5))
433 #define PHY_CFG_PRODUCT_NUMBER  (BIT(6) | BIT(7))
434 #define PHY_CFG_TX_CHAIN_A      BIT(8)
435 #define PHY_CFG_TX_CHAIN_B      BIT(9)
436 #define PHY_CFG_TX_CHAIN_C      BIT(10)
437 #define PHY_CFG_RX_CHAIN_A      BIT(12)
438 #define PHY_CFG_RX_CHAIN_B      BIT(13)
439 #define PHY_CFG_RX_CHAIN_C      BIT(14)
440
441
442 /* Target of the NVM_ACCESS_CMD */
443 enum {
444         NVM_ACCESS_TARGET_CACHE = 0,
445         NVM_ACCESS_TARGET_OTP = 1,
446         NVM_ACCESS_TARGET_EEPROM = 2,
447 };
448
449 /* Section types for NVM_ACCESS_CMD */
450 enum {
451         NVM_SECTION_TYPE_SW = 1,
452         NVM_SECTION_TYPE_REGULATORY = 3,
453         NVM_SECTION_TYPE_CALIBRATION = 4,
454         NVM_SECTION_TYPE_PRODUCTION = 5,
455         NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
456         NVM_SECTION_TYPE_PHY_SKU = 12,
457         NVM_MAX_NUM_SECTIONS = 13,
458 };
459
460 /**
461  * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section
462  * @op_code: 0 - read, 1 - write
463  * @target: NVM_ACCESS_TARGET_*
464  * @type: NVM_SECTION_TYPE_*
465  * @offset: offset in bytes into the section
466  * @length: in bytes, to read/write
467  * @data: if write operation, the data to write. On read its empty
468  */
469 struct iwl_nvm_access_cmd {
470         u8 op_code;
471         u8 target;
472         __le16 type;
473         __le16 offset;
474         __le16 length;
475         u8 data[];
476 } __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
477
478 #define NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */
479
480 /*
481  * struct iwl_fw_paging_cmd - paging layout
482  *
483  * (FW_PAGING_BLOCK_CMD = 0x4f)
484  *
485  * Send to FW the paging layout in the driver.
486  *
487  * @flags: various flags for the command
488  * @block_size: the block size in powers of 2
489  * @block_num: number of blocks specified in the command.
490  * @device_phy_addr: virtual addresses from device side
491  *      32 bit address for API version 1, 64 bit address for API version 2.
492 */
493 struct iwl_fw_paging_cmd {
494         __le32 flags;
495         __le32 block_size;
496         __le32 block_num;
497         union {
498                 __le32 addr32[NUM_OF_FW_PAGING_BLOCKS];
499                 __le64 addr64[NUM_OF_FW_PAGING_BLOCKS];
500         } device_phy_addr;
501 } __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_2 */
502
503 /*
504  * Fw items ID's
505  *
506  * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
507  *      download
508  */
509 enum iwl_fw_item_id {
510         IWL_FW_ITEM_ID_PAGING = 3,
511 };
512
513 /*
514  * struct iwl_fw_get_item_cmd - get an item from the fw
515  */
516 struct iwl_fw_get_item_cmd {
517         __le32 item_id;
518 } __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */
519
520 #define CONT_REC_COMMAND_SIZE   80
521 #define ENABLE_CONT_RECORDING   0x15
522 #define DISABLE_CONT_RECORDING  0x16
523
524 /*
525  * struct iwl_continuous_record_mode - recording mode
526  */
527 struct iwl_continuous_record_mode {
528         __le16 enable_recording;
529 } __packed;
530
531 /*
532  * struct iwl_continuous_record_cmd - enable/disable continuous recording
533  */
534 struct iwl_continuous_record_cmd {
535         struct iwl_continuous_record_mode record_mode;
536         u8 pad[CONT_REC_COMMAND_SIZE -
537                 sizeof(struct iwl_continuous_record_mode)];
538 } __packed;
539
540 struct iwl_fw_get_item_resp {
541         __le32 item_id;
542         __le32 item_byte_cnt;
543         __le32 item_val;
544 } __packed; /* FW_GET_ITEM_RSP_S_VER_1 */
545
546 /**
547  * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
548  * @offset: offset in bytes into the section
549  * @length: in bytes, either how much was written or read
550  * @type: NVM_SECTION_TYPE_*
551  * @status: 0 for success, fail otherwise
552  * @data: if read operation, the data returned. Empty on write.
553  */
554 struct iwl_nvm_access_resp {
555         __le16 offset;
556         __le16 length;
557         __le16 type;
558         __le16 status;
559         u8 data[];
560 } __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */
561
562 /* MVM_ALIVE 0x1 */
563
564 /* alive response is_valid values */
565 #define ALIVE_RESP_UCODE_OK     BIT(0)
566 #define ALIVE_RESP_RFKILL       BIT(1)
567
568 /* alive response ver_type values */
569 enum {
570         FW_TYPE_HW = 0,
571         FW_TYPE_PROT = 1,
572         FW_TYPE_AP = 2,
573         FW_TYPE_WOWLAN = 3,
574         FW_TYPE_TIMING = 4,
575         FW_TYPE_WIPAN = 5
576 };
577
578 /* alive response ver_subtype values */
579 enum {
580         FW_SUBTYPE_FULL_FEATURE = 0,
581         FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
582         FW_SUBTYPE_REDUCED = 2,
583         FW_SUBTYPE_ALIVE_ONLY = 3,
584         FW_SUBTYPE_WOWLAN = 4,
585         FW_SUBTYPE_AP_SUBTYPE = 5,
586         FW_SUBTYPE_WIPAN = 6,
587         FW_SUBTYPE_INITIALIZE = 9
588 };
589
590 #define IWL_ALIVE_STATUS_ERR 0xDEAD
591 #define IWL_ALIVE_STATUS_OK 0xCAFE
592
593 #define IWL_ALIVE_FLG_RFKILL    BIT(0)
594
595 struct mvm_alive_resp_ver1 {
596         __le16 status;
597         __le16 flags;
598         u8 ucode_minor;
599         u8 ucode_major;
600         __le16 id;
601         u8 api_minor;
602         u8 api_major;
603         u8 ver_subtype;
604         u8 ver_type;
605         u8 mac;
606         u8 opt;
607         __le16 reserved2;
608         __le32 timestamp;
609         __le32 error_event_table_ptr;   /* SRAM address for error log */
610         __le32 log_event_table_ptr;     /* SRAM address for event log */
611         __le32 cpu_register_ptr;
612         __le32 dbgm_config_ptr;
613         __le32 alive_counter_ptr;
614         __le32 scd_base_ptr;            /* SRAM address for SCD */
615 } __packed; /* ALIVE_RES_API_S_VER_1 */
616
617 struct mvm_alive_resp_ver2 {
618         __le16 status;
619         __le16 flags;
620         u8 ucode_minor;
621         u8 ucode_major;
622         __le16 id;
623         u8 api_minor;
624         u8 api_major;
625         u8 ver_subtype;
626         u8 ver_type;
627         u8 mac;
628         u8 opt;
629         __le16 reserved2;
630         __le32 timestamp;
631         __le32 error_event_table_ptr;   /* SRAM address for error log */
632         __le32 log_event_table_ptr;     /* SRAM address for LMAC event log */
633         __le32 cpu_register_ptr;
634         __le32 dbgm_config_ptr;
635         __le32 alive_counter_ptr;
636         __le32 scd_base_ptr;            /* SRAM address for SCD */
637         __le32 st_fwrd_addr;            /* pointer to Store and forward */
638         __le32 st_fwrd_size;
639         u8 umac_minor;                  /* UMAC version: minor */
640         u8 umac_major;                  /* UMAC version: major */
641         __le16 umac_id;                 /* UMAC version: id */
642         __le32 error_info_addr;         /* SRAM address for UMAC error log */
643         __le32 dbg_print_buff_addr;
644 } __packed; /* ALIVE_RES_API_S_VER_2 */
645
646 struct mvm_alive_resp {
647         __le16 status;
648         __le16 flags;
649         __le32 ucode_minor;
650         __le32 ucode_major;
651         u8 ver_subtype;
652         u8 ver_type;
653         u8 mac;
654         u8 opt;
655         __le32 timestamp;
656         __le32 error_event_table_ptr;   /* SRAM address for error log */
657         __le32 log_event_table_ptr;     /* SRAM address for LMAC event log */
658         __le32 cpu_register_ptr;
659         __le32 dbgm_config_ptr;
660         __le32 alive_counter_ptr;
661         __le32 scd_base_ptr;            /* SRAM address for SCD */
662         __le32 st_fwrd_addr;            /* pointer to Store and forward */
663         __le32 st_fwrd_size;
664         __le32 umac_minor;              /* UMAC version: minor */
665         __le32 umac_major;              /* UMAC version: major */
666         __le32 error_info_addr;         /* SRAM address for UMAC error log */
667         __le32 dbg_print_buff_addr;
668 } __packed; /* ALIVE_RES_API_S_VER_3 */
669
670 /* Error response/notification */
671 enum {
672         FW_ERR_UNKNOWN_CMD = 0x0,
673         FW_ERR_INVALID_CMD_PARAM = 0x1,
674         FW_ERR_SERVICE = 0x2,
675         FW_ERR_ARC_MEMORY = 0x3,
676         FW_ERR_ARC_CODE = 0x4,
677         FW_ERR_WATCH_DOG = 0x5,
678         FW_ERR_WEP_GRP_KEY_INDX = 0x10,
679         FW_ERR_WEP_KEY_SIZE = 0x11,
680         FW_ERR_OBSOLETE_FUNC = 0x12,
681         FW_ERR_UNEXPECTED = 0xFE,
682         FW_ERR_FATAL = 0xFF
683 };
684
685 /**
686  * struct iwl_error_resp - FW error indication
687  * ( REPLY_ERROR = 0x2 )
688  * @error_type: one of FW_ERR_*
689  * @cmd_id: the command ID for which the error occured
690  * @bad_cmd_seq_num: sequence number of the erroneous command
691  * @error_service: which service created the error, applicable only if
692  *      error_type = 2, otherwise 0
693  * @timestamp: TSF in usecs.
694  */
695 struct iwl_error_resp {
696         __le32 error_type;
697         u8 cmd_id;
698         u8 reserved1;
699         __le16 bad_cmd_seq_num;
700         __le32 error_service;
701         __le64 timestamp;
702 } __packed;
703
704
705 /* Common PHY, MAC and Bindings definitions */
706
707 #define MAX_MACS_IN_BINDING     (3)
708 #define MAX_BINDINGS            (4)
709 #define AUX_BINDING_INDEX       (3)
710 #define MAX_PHYS                (4)
711
712 /* Used to extract ID and color from the context dword */
713 #define FW_CTXT_ID_POS    (0)
714 #define FW_CTXT_ID_MSK    (0xff << FW_CTXT_ID_POS)
715 #define FW_CTXT_COLOR_POS (8)
716 #define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS)
717 #define FW_CTXT_INVALID   (0xffffffff)
718
719 #define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\
720                                           (_color << FW_CTXT_COLOR_POS))
721
722 /* Possible actions on PHYs, MACs and Bindings */
723 enum {
724         FW_CTXT_ACTION_STUB = 0,
725         FW_CTXT_ACTION_ADD,
726         FW_CTXT_ACTION_MODIFY,
727         FW_CTXT_ACTION_REMOVE,
728         FW_CTXT_ACTION_NUM
729 }; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */
730
731 /* Time Events */
732
733 /* Time Event types, according to MAC type */
734 enum iwl_time_event_type {
735         /* BSS Station Events */
736         TE_BSS_STA_AGGRESSIVE_ASSOC,
737         TE_BSS_STA_ASSOC,
738         TE_BSS_EAP_DHCP_PROT,
739         TE_BSS_QUIET_PERIOD,
740
741         /* P2P Device Events */
742         TE_P2P_DEVICE_DISCOVERABLE,
743         TE_P2P_DEVICE_LISTEN,
744         TE_P2P_DEVICE_ACTION_SCAN,
745         TE_P2P_DEVICE_FULL_SCAN,
746
747         /* P2P Client Events */
748         TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
749         TE_P2P_CLIENT_ASSOC,
750         TE_P2P_CLIENT_QUIET_PERIOD,
751
752         /* P2P GO Events */
753         TE_P2P_GO_ASSOC_PROT,
754         TE_P2P_GO_REPETITIVET_NOA,
755         TE_P2P_GO_CT_WINDOW,
756
757         /* WiDi Sync Events */
758         TE_WIDI_TX_SYNC,
759
760         /* Channel Switch NoA */
761         TE_CHANNEL_SWITCH_PERIOD,
762
763         TE_MAX
764 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
765
766
767
768 /* Time event - defines for command API v1 */
769
770 /*
771  * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
772  * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
773  *      the first fragment is scheduled.
774  * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
775  *      the first 2 fragments are scheduled.
776  * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
777  *      number of fragments are valid.
778  *
779  * Other than the constant defined above, specifying a fragmentation value 'x'
780  * means that the event can be fragmented but only the first 'x' will be
781  * scheduled.
782  */
783 enum {
784         TE_V1_FRAG_NONE = 0,
785         TE_V1_FRAG_SINGLE = 1,
786         TE_V1_FRAG_DUAL = 2,
787         TE_V1_FRAG_ENDLESS = 0xffffffff
788 };
789
790 /* If a Time Event can be fragmented, this is the max number of fragments */
791 #define TE_V1_FRAG_MAX_MSK      0x0fffffff
792 /* Repeat the time event endlessly (until removed) */
793 #define TE_V1_REPEAT_ENDLESS    0xffffffff
794 /* If a Time Event has bounded repetitions, this is the maximal value */
795 #define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff
796
797 /* Time Event dependencies: none, on another TE, or in a specific time */
798 enum {
799         TE_V1_INDEPENDENT               = 0,
800         TE_V1_DEP_OTHER                 = BIT(0),
801         TE_V1_DEP_TSF                   = BIT(1),
802         TE_V1_EVENT_SOCIOPATHIC         = BIT(2),
803 }; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */
804
805 /*
806  * @TE_V1_NOTIF_NONE: no notifications
807  * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
808  * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
809  * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
810  * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
811  * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
812  * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
813  * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
814  * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
815  *
816  * Supported Time event notifications configuration.
817  * A notification (both event and fragment) includes a status indicating weather
818  * the FW was able to schedule the event or not. For fragment start/end
819  * notification the status is always success. There is no start/end fragment
820  * notification for monolithic events.
821  */
822 enum {
823         TE_V1_NOTIF_NONE = 0,
824         TE_V1_NOTIF_HOST_EVENT_START = BIT(0),
825         TE_V1_NOTIF_HOST_EVENT_END = BIT(1),
826         TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2),
827         TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3),
828         TE_V1_NOTIF_HOST_FRAG_START = BIT(4),
829         TE_V1_NOTIF_HOST_FRAG_END = BIT(5),
830         TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6),
831         TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
832 }; /* MAC_EVENT_ACTION_API_E_VER_2 */
833
834 /* Time event - defines for command API */
835
836 /*
837  * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
838  * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
839  *  the first fragment is scheduled.
840  * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
841  *  the first 2 fragments are scheduled.
842  * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
843  *  number of fragments are valid.
844  *
845  * Other than the constant defined above, specifying a fragmentation value 'x'
846  * means that the event can be fragmented but only the first 'x' will be
847  * scheduled.
848  */
849 enum {
850         TE_V2_FRAG_NONE = 0,
851         TE_V2_FRAG_SINGLE = 1,
852         TE_V2_FRAG_DUAL = 2,
853         TE_V2_FRAG_MAX = 0xfe,
854         TE_V2_FRAG_ENDLESS = 0xff
855 };
856
857 /* Repeat the time event endlessly (until removed) */
858 #define TE_V2_REPEAT_ENDLESS    0xff
859 /* If a Time Event has bounded repetitions, this is the maximal value */
860 #define TE_V2_REPEAT_MAX        0xfe
861
862 #define TE_V2_PLACEMENT_POS     12
863 #define TE_V2_ABSENCE_POS       15
864
865 /* Time event policy values
866  * A notification (both event and fragment) includes a status indicating weather
867  * the FW was able to schedule the event or not. For fragment start/end
868  * notification the status is always success. There is no start/end fragment
869  * notification for monolithic events.
870  *
871  * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
872  * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
873  * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
874  * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
875  * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
876  * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
877  * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
878  * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
879  * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
880  * @TE_V2_DEP_OTHER: depends on another time event
881  * @TE_V2_DEP_TSF: depends on a specific time
882  * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
883  * @TE_V2_ABSENCE: are we present or absent during the Time Event.
884  */
885 enum {
886         TE_V2_DEFAULT_POLICY = 0x0,
887
888         /* notifications (event start/stop, fragment start/stop) */
889         TE_V2_NOTIF_HOST_EVENT_START = BIT(0),
890         TE_V2_NOTIF_HOST_EVENT_END = BIT(1),
891         TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2),
892         TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3),
893
894         TE_V2_NOTIF_HOST_FRAG_START = BIT(4),
895         TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
896         TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
897         TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
898         T2_V2_START_IMMEDIATELY = BIT(11),
899
900         TE_V2_NOTIF_MSK = 0xff,
901
902         /* placement characteristics */
903         TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS),
904         TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1),
905         TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2),
906
907         /* are we present or absent during the Time Event. */
908         TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS),
909 };
910
911 /**
912  * struct iwl_time_event_cmd_api - configuring Time Events
913  * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
914  * with version 1. determined by IWL_UCODE_TLV_FLAGS)
915  * ( TIME_EVENT_CMD = 0x29 )
916  * @id_and_color: ID and color of the relevant MAC
917  * @action: action to perform, one of FW_CTXT_ACTION_*
918  * @id: this field has two meanings, depending on the action:
919  *      If the action is ADD, then it means the type of event to add.
920  *      For all other actions it is the unique event ID assigned when the
921  *      event was added by the FW.
922  * @apply_time: When to start the Time Event (in GP2)
923  * @max_delay: maximum delay to event's start (apply time), in TU
924  * @depends_on: the unique ID of the event we depend on (if any)
925  * @interval: interval between repetitions, in TU
926  * @duration: duration of event in TU
927  * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
928  * @max_frags: maximal number of fragments the Time Event can be divided to
929  * @policy: defines whether uCode shall notify the host or other uCode modules
930  *      on event and/or fragment start and/or end
931  *      using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF
932  *      TE_EVENT_SOCIOPATHIC
933  *      using TE_ABSENCE and using TE_NOTIF_*
934  */
935 struct iwl_time_event_cmd {
936         /* COMMON_INDEX_HDR_API_S_VER_1 */
937         __le32 id_and_color;
938         __le32 action;
939         __le32 id;
940         /* MAC_TIME_EVENT_DATA_API_S_VER_2 */
941         __le32 apply_time;
942         __le32 max_delay;
943         __le32 depends_on;
944         __le32 interval;
945         __le32 duration;
946         u8 repeat;
947         u8 max_frags;
948         __le16 policy;
949 } __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */
950
951 /**
952  * struct iwl_time_event_resp - response structure to iwl_time_event_cmd
953  * @status: bit 0 indicates success, all others specify errors
954  * @id: the Time Event type
955  * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
956  * @id_and_color: ID and color of the relevant MAC
957  */
958 struct iwl_time_event_resp {
959         __le32 status;
960         __le32 id;
961         __le32 unique_id;
962         __le32 id_and_color;
963 } __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */
964
965 /**
966  * struct iwl_time_event_notif - notifications of time event start/stop
967  * ( TIME_EVENT_NOTIFICATION = 0x2a )
968  * @timestamp: action timestamp in GP2
969  * @session_id: session's unique id
970  * @unique_id: unique id of the Time Event itself
971  * @id_and_color: ID and color of the relevant MAC
972  * @action: one of TE_NOTIF_START or TE_NOTIF_END
973  * @status: true if scheduled, false otherwise (not executed)
974  */
975 struct iwl_time_event_notif {
976         __le32 timestamp;
977         __le32 session_id;
978         __le32 unique_id;
979         __le32 id_and_color;
980         __le32 action;
981         __le32 status;
982 } __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */
983
984
985 /* Bindings and Time Quota */
986
987 /**
988  * struct iwl_binding_cmd - configuring bindings
989  * ( BINDING_CONTEXT_CMD = 0x2b )
990  * @id_and_color: ID and color of the relevant Binding
991  * @action: action to perform, one of FW_CTXT_ACTION_*
992  * @macs: array of MAC id and colors which belong to the binding
993  * @phy: PHY id and color which belongs to the binding
994  */
995 struct iwl_binding_cmd {
996         /* COMMON_INDEX_HDR_API_S_VER_1 */
997         __le32 id_and_color;
998         __le32 action;
999         /* BINDING_DATA_API_S_VER_1 */
1000         __le32 macs[MAX_MACS_IN_BINDING];
1001         __le32 phy;
1002 } __packed; /* BINDING_CMD_API_S_VER_1 */
1003
1004 /* The maximal number of fragments in the FW's schedule session */
1005 #define IWL_MVM_MAX_QUOTA 128
1006
1007 /**
1008  * struct iwl_time_quota_data - configuration of time quota per binding
1009  * @id_and_color: ID and color of the relevant Binding
1010  * @quota: absolute time quota in TU. The scheduler will try to divide the
1011  *      remainig quota (after Time Events) according to this quota.
1012  * @max_duration: max uninterrupted context duration in TU
1013  */
1014 struct iwl_time_quota_data {
1015         __le32 id_and_color;
1016         __le32 quota;
1017         __le32 max_duration;
1018 } __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */
1019
1020 /**
1021  * struct iwl_time_quota_cmd - configuration of time quota between bindings
1022  * ( TIME_QUOTA_CMD = 0x2c )
1023  * @quotas: allocations per binding
1024  */
1025 struct iwl_time_quota_cmd {
1026         struct iwl_time_quota_data quotas[MAX_BINDINGS];
1027 } __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
1028
1029
1030 /* PHY context */
1031
1032 /* Supported bands */
1033 #define PHY_BAND_5  (0)
1034 #define PHY_BAND_24 (1)
1035
1036 /* Supported channel width, vary if there is VHT support */
1037 #define PHY_VHT_CHANNEL_MODE20  (0x0)
1038 #define PHY_VHT_CHANNEL_MODE40  (0x1)
1039 #define PHY_VHT_CHANNEL_MODE80  (0x2)
1040 #define PHY_VHT_CHANNEL_MODE160 (0x3)
1041
1042 /*
1043  * Control channel position:
1044  * For legacy set bit means upper channel, otherwise lower.
1045  * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
1046  *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
1047  *                                   center_freq
1048  *                                        |
1049  * 40Mhz                          |_______|_______|
1050  * 80Mhz                  |_______|_______|_______|_______|
1051  * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
1052  * code      011     010     001     000  |  100     101     110    111
1053  */
1054 #define PHY_VHT_CTRL_POS_1_BELOW  (0x0)
1055 #define PHY_VHT_CTRL_POS_2_BELOW  (0x1)
1056 #define PHY_VHT_CTRL_POS_3_BELOW  (0x2)
1057 #define PHY_VHT_CTRL_POS_4_BELOW  (0x3)
1058 #define PHY_VHT_CTRL_POS_1_ABOVE  (0x4)
1059 #define PHY_VHT_CTRL_POS_2_ABOVE  (0x5)
1060 #define PHY_VHT_CTRL_POS_3_ABOVE  (0x6)
1061 #define PHY_VHT_CTRL_POS_4_ABOVE  (0x7)
1062
1063 /*
1064  * @band: PHY_BAND_*
1065  * @channel: channel number
1066  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
1067  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
1068  */
1069 struct iwl_fw_channel_info {
1070         u8 band;
1071         u8 channel;
1072         u8 width;
1073         u8 ctrl_pos;
1074 } __packed;
1075
1076 #define PHY_RX_CHAIN_DRIVER_FORCE_POS   (0)
1077 #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
1078         (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
1079 #define PHY_RX_CHAIN_VALID_POS          (1)
1080 #define PHY_RX_CHAIN_VALID_MSK \
1081         (0x7 << PHY_RX_CHAIN_VALID_POS)
1082 #define PHY_RX_CHAIN_FORCE_SEL_POS      (4)
1083 #define PHY_RX_CHAIN_FORCE_SEL_MSK \
1084         (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
1085 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
1086 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
1087         (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
1088 #define PHY_RX_CHAIN_CNT_POS            (10)
1089 #define PHY_RX_CHAIN_CNT_MSK \
1090         (0x3 << PHY_RX_CHAIN_CNT_POS)
1091 #define PHY_RX_CHAIN_MIMO_CNT_POS       (12)
1092 #define PHY_RX_CHAIN_MIMO_CNT_MSK \
1093         (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
1094 #define PHY_RX_CHAIN_MIMO_FORCE_POS     (14)
1095 #define PHY_RX_CHAIN_MIMO_FORCE_MSK \
1096         (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
1097
1098 /* TODO: fix the value, make it depend on firmware at runtime? */
1099 #define NUM_PHY_CTX     3
1100
1101 /* TODO: complete missing documentation */
1102 /**
1103  * struct iwl_phy_context_cmd - config of the PHY context
1104  * ( PHY_CONTEXT_CMD = 0x8 )
1105  * @id_and_color: ID and color of the relevant Binding
1106  * @action: action to perform, one of FW_CTXT_ACTION_*
1107  * @apply_time: 0 means immediate apply and context switch.
1108  *      other value means apply new params after X usecs
1109  * @tx_param_color: ???
1110  * @channel_info:
1111  * @txchain_info: ???
1112  * @rxchain_info: ???
1113  * @acquisition_data: ???
1114  * @dsp_cfg_flags: set to 0
1115  */
1116 struct iwl_phy_context_cmd {
1117         /* COMMON_INDEX_HDR_API_S_VER_1 */
1118         __le32 id_and_color;
1119         __le32 action;
1120         /* PHY_CONTEXT_DATA_API_S_VER_1 */
1121         __le32 apply_time;
1122         __le32 tx_param_color;
1123         struct iwl_fw_channel_info ci;
1124         __le32 txchain_info;
1125         __le32 rxchain_info;
1126         __le32 acquisition_data;
1127         __le32 dsp_cfg_flags;
1128 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
1129
1130 /*
1131  * Aux ROC command
1132  *
1133  * Command requests the firmware to create a time event for a certain duration
1134  * and remain on the given channel. This is done by using the Aux framework in
1135  * the FW.
1136  * The command was first used for Hot Spot issues - but can be used regardless
1137  * to Hot Spot.
1138  *
1139  * ( HOT_SPOT_CMD 0x53 )
1140  *
1141  * @id_and_color: ID and color of the MAC
1142  * @action: action to perform, one of FW_CTXT_ACTION_*
1143  * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
1144  *      event_unique_id should be the id of the time event assigned by ucode.
1145  *      Otherwise ignore the event_unique_id.
1146  * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
1147  *      activity.
1148  * @channel_info: channel info
1149  * @node_addr: Our MAC Address
1150  * @reserved: reserved for alignment
1151  * @apply_time: GP2 value to start (should always be the current GP2 value)
1152  * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
1153  *      time by which start of the event is allowed to be postponed.
1154  * @duration: event duration in TU To calculate event duration:
1155  *      timeEventDuration = min(duration, remainingQuota)
1156  */
1157 struct iwl_hs20_roc_req {
1158         /* COMMON_INDEX_HDR_API_S_VER_1 hdr */
1159         __le32 id_and_color;
1160         __le32 action;
1161         __le32 event_unique_id;
1162         __le32 sta_id_and_color;
1163         struct iwl_fw_channel_info channel_info;
1164         u8 node_addr[ETH_ALEN];
1165         __le16 reserved;
1166         __le32 apply_time;
1167         __le32 apply_time_max_delay;
1168         __le32 duration;
1169 } __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
1170
1171 /*
1172  * values for AUX ROC result values
1173  */
1174 enum iwl_mvm_hot_spot {
1175         HOT_SPOT_RSP_STATUS_OK,
1176         HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
1177         HOT_SPOT_MAX_NUM_OF_SESSIONS,
1178 };
1179
1180 /*
1181  * Aux ROC command response
1182  *
1183  * In response to iwl_hs20_roc_req the FW sends this command to notify the
1184  * driver the uid of the timevent.
1185  *
1186  * ( HOT_SPOT_CMD 0x53 )
1187  *
1188  * @event_unique_id: Unique ID of time event assigned by ucode
1189  * @status: Return status 0 is success, all the rest used for specific errors
1190  */
1191 struct iwl_hs20_roc_res {
1192         __le32 event_unique_id;
1193         __le32 status;
1194 } __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
1195
1196 /**
1197  * struct iwl_radio_version_notif - information on the radio version
1198  * ( RADIO_VERSION_NOTIFICATION = 0x68 )
1199  * @radio_flavor:
1200  * @radio_step:
1201  * @radio_dash:
1202  */
1203 struct iwl_radio_version_notif {
1204         __le32 radio_flavor;
1205         __le32 radio_step;
1206         __le32 radio_dash;
1207 } __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */
1208
1209 enum iwl_card_state_flags {
1210         CARD_ENABLED            = 0x00,
1211         HW_CARD_DISABLED        = 0x01,
1212         SW_CARD_DISABLED        = 0x02,
1213         CT_KILL_CARD_DISABLED   = 0x04,
1214         HALT_CARD_DISABLED      = 0x08,
1215         CARD_DISABLED_MSK       = 0x0f,
1216         CARD_IS_RX_ON           = 0x10,
1217 };
1218
1219 /**
1220  * struct iwl_radio_version_notif - information on the radio version
1221  * ( CARD_STATE_NOTIFICATION = 0xa1 )
1222  * @flags: %iwl_card_state_flags
1223  */
1224 struct iwl_card_state_notif {
1225         __le32 flags;
1226 } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
1227
1228 /**
1229  * struct iwl_missed_beacons_notif - information on missed beacons
1230  * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
1231  * @mac_id: interface ID
1232  * @consec_missed_beacons_since_last_rx: number of consecutive missed
1233  *      beacons since last RX.
1234  * @consec_missed_beacons: number of consecutive missed beacons
1235  * @num_expected_beacons:
1236  * @num_recvd_beacons:
1237  */
1238 struct iwl_missed_beacons_notif {
1239         __le32 mac_id;
1240         __le32 consec_missed_beacons_since_last_rx;
1241         __le32 consec_missed_beacons;
1242         __le32 num_expected_beacons;
1243         __le32 num_recvd_beacons;
1244 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
1245
1246 /**
1247  * struct iwl_mfuart_load_notif - mfuart image version & status
1248  * ( MFUART_LOAD_NOTIFICATION = 0xb1 )
1249  * @installed_ver: installed image version
1250  * @external_ver: external image version
1251  * @status: MFUART loading status
1252  * @duration: MFUART loading time
1253 */
1254 struct iwl_mfuart_load_notif {
1255         __le32 installed_ver;
1256         __le32 external_ver;
1257         __le32 status;
1258         __le32 duration;
1259 } __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
1260
1261 /**
1262  * struct iwl_set_calib_default_cmd - set default value for calibration.
1263  * ( SET_CALIB_DEFAULT_CMD = 0x8e )
1264  * @calib_index: the calibration to set value for
1265  * @length: of data
1266  * @data: the value to set for the calibration result
1267  */
1268 struct iwl_set_calib_default_cmd {
1269         __le16 calib_index;
1270         __le16 length;
1271         u8 data[0];
1272 } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
1273
1274 #define MAX_PORT_ID_NUM 2
1275 #define MAX_MCAST_FILTERING_ADDRESSES 256
1276
1277 /**
1278  * struct iwl_mcast_filter_cmd - configure multicast filter.
1279  * @filter_own: Set 1 to filter out multicast packets sent by station itself
1280  * @port_id:    Multicast MAC addresses array specifier. This is a strange way
1281  *              to identify network interface adopted in host-device IF.
1282  *              It is used by FW as index in array of addresses. This array has
1283  *              MAX_PORT_ID_NUM members.
1284  * @count:      Number of MAC addresses in the array
1285  * @pass_all:   Set 1 to pass all multicast packets.
1286  * @bssid:      current association BSSID.
1287  * @addr_list:  Place holder for array of MAC addresses.
1288  *              IMPORTANT: add padding if necessary to ensure DWORD alignment.
1289  */
1290 struct iwl_mcast_filter_cmd {
1291         u8 filter_own;
1292         u8 port_id;
1293         u8 count;
1294         u8 pass_all;
1295         u8 bssid[6];
1296         u8 reserved[2];
1297         u8 addr_list[0];
1298 } __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
1299
1300 #define MAX_BCAST_FILTERS 8
1301 #define MAX_BCAST_FILTER_ATTRS 2
1302
1303 /**
1304  * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
1305  * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
1306  * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
1307  *      start of ip payload).
1308  */
1309 enum iwl_mvm_bcast_filter_attr_offset {
1310         BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
1311         BCAST_FILTER_OFFSET_IP_END = 1,
1312 };
1313
1314 /**
1315  * struct iwl_fw_bcast_filter_attr - broadcast filter attribute
1316  * @offset_type:        &enum iwl_mvm_bcast_filter_attr_offset.
1317  * @offset:     starting offset of this pattern.
1318  * @val:                value to match - big endian (MSB is the first
1319  *              byte to match from offset pos).
1320  * @mask:       mask to match (big endian).
1321  */
1322 struct iwl_fw_bcast_filter_attr {
1323         u8 offset_type;
1324         u8 offset;
1325         __le16 reserved1;
1326         __be32 val;
1327         __be32 mask;
1328 } __packed; /* BCAST_FILTER_ATT_S_VER_1 */
1329
1330 /**
1331  * enum iwl_mvm_bcast_filter_frame_type - filter frame type
1332  * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
1333  * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
1334  */
1335 enum iwl_mvm_bcast_filter_frame_type {
1336         BCAST_FILTER_FRAME_TYPE_ALL = 0,
1337         BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
1338 };
1339
1340 /**
1341  * struct iwl_fw_bcast_filter - broadcast filter
1342  * @discard: discard frame (1) or let it pass (0).
1343  * @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
1344  * @num_attrs: number of valid attributes in this filter.
1345  * @attrs: attributes of this filter. a filter is considered matched
1346  *      only when all its attributes are matched (i.e. AND relationship)
1347  */
1348 struct iwl_fw_bcast_filter {
1349         u8 discard;
1350         u8 frame_type;
1351         u8 num_attrs;
1352         u8 reserved1;
1353         struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
1354 } __packed; /* BCAST_FILTER_S_VER_1 */
1355
1356 #define BA_WINDOW_STREAMS_MAX           16
1357 #define BA_WINDOW_STATUS_TID_MSK        0x000F
1358 #define BA_WINDOW_STATUS_STA_ID_POS     4
1359 #define BA_WINDOW_STATUS_STA_ID_MSK     0x01F0
1360 #define BA_WINDOW_STATUS_VALID_MSK      BIT(9)
1361
1362 /**
1363  * struct iwl_ba_window_status_notif - reordering window's status notification
1364  * @bitmap: bitmap of received frames [start_seq_num + 0]..[start_seq_num + 63]
1365  * @ra_tid: bit 3:0 - TID, bit 8:4 - STA_ID, bit 9 - valid
1366  * @start_seq_num: the start sequence number of the bitmap
1367  * @mpdu_rx_count: the number of received MPDUs since entering D0i3
1368  */
1369 struct iwl_ba_window_status_notif {
1370         __le64 bitmap[BA_WINDOW_STREAMS_MAX];
1371         __le16 ra_tid[BA_WINDOW_STREAMS_MAX];
1372         __le32 start_seq_num[BA_WINDOW_STREAMS_MAX];
1373         __le16 mpdu_rx_count[BA_WINDOW_STREAMS_MAX];
1374 } __packed; /* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */
1375
1376 /**
1377  * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
1378  * @default_discard: default action for this mac (discard (1) / pass (0)).
1379  * @attached_filters: bitmap of relevant filters for this mac.
1380  */
1381 struct iwl_fw_bcast_mac {
1382         u8 default_discard;
1383         u8 reserved1;
1384         __le16 attached_filters;
1385 } __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */
1386
1387 /**
1388  * struct iwl_bcast_filter_cmd - broadcast filtering configuration
1389  * @disable: enable (0) / disable (1)
1390  * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
1391  * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
1392  * @filters: broadcast filters
1393  * @macs: broadcast filtering configuration per-mac
1394  */
1395 struct iwl_bcast_filter_cmd {
1396         u8 disable;
1397         u8 max_bcast_filters;
1398         u8 max_macs;
1399         u8 reserved1;
1400         struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
1401         struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
1402 } __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */
1403
1404 /*
1405  * enum iwl_mvm_marker_id - maker ids
1406  *
1407  * The ids for different type of markers to insert into the usniffer logs
1408  */
1409 enum iwl_mvm_marker_id {
1410         MARKER_ID_TX_FRAME_LATENCY = 1,
1411 }; /* MARKER_ID_API_E_VER_1 */
1412
1413 /**
1414  * struct iwl_mvm_marker - mark info into the usniffer logs
1415  *
1416  * (MARKER_CMD = 0xcb)
1417  *
1418  * Mark the UTC time stamp into the usniffer logs together with additional
1419  * metadata, so the usniffer output can be parsed.
1420  * In the command response the ucode will return the GP2 time.
1421  *
1422  * @dw_len: The amount of dwords following this byte including this byte.
1423  * @marker_id: A unique marker id (iwl_mvm_marker_id).
1424  * @reserved: reserved.
1425  * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC
1426  * @metadata: additional meta data that will be written to the unsiffer log
1427  */
1428 struct iwl_mvm_marker {
1429         u8 dwLen;
1430         u8 markerId;
1431         __le16 reserved;
1432         __le64 timestamp;
1433         __le32 metadata[0];
1434 } __packed; /* MARKER_API_S_VER_1 */
1435
1436 /*
1437  * enum iwl_dc2dc_config_id - flag ids
1438  *
1439  * Ids of dc2dc configuration flags
1440  */
1441 enum iwl_dc2dc_config_id {
1442         DCDC_LOW_POWER_MODE_MSK_SET  = 0x1, /* not used */
1443         DCDC_FREQ_TUNE_SET = 0x2,
1444 }; /* MARKER_ID_API_E_VER_1 */
1445
1446 /**
1447  * struct iwl_dc2dc_config_cmd - configure dc2dc values
1448  *
1449  * (DC2DC_CONFIG_CMD = 0x83)
1450  *
1451  * Set/Get & configure dc2dc values.
1452  * The command always returns the current dc2dc values.
1453  *
1454  * @flags: set/get dc2dc
1455  * @enable_low_power_mode: not used.
1456  * @dc2dc_freq_tune0: frequency divider - digital domain
1457  * @dc2dc_freq_tune1: frequency divider - analog domain
1458  */
1459 struct iwl_dc2dc_config_cmd {
1460         __le32 flags;
1461         __le32 enable_low_power_mode; /* not used */
1462         __le32 dc2dc_freq_tune0;
1463         __le32 dc2dc_freq_tune1;
1464 } __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */
1465
1466 /**
1467  * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd
1468  *
1469  * Current dc2dc values returned by the FW.
1470  *
1471  * @dc2dc_freq_tune0: frequency divider - digital domain
1472  * @dc2dc_freq_tune1: frequency divider - analog domain
1473  */
1474 struct iwl_dc2dc_config_resp {
1475         __le32 dc2dc_freq_tune0;
1476         __le32 dc2dc_freq_tune1;
1477 } __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */
1478
1479 /***********************************
1480  * Smart Fifo API
1481  ***********************************/
1482 /* Smart Fifo state */
1483 enum iwl_sf_state {
1484         SF_LONG_DELAY_ON = 0, /* should never be called by driver */
1485         SF_FULL_ON,
1486         SF_UNINIT,
1487         SF_INIT_OFF,
1488         SF_HW_NUM_STATES
1489 };
1490
1491 /* Smart Fifo possible scenario */
1492 enum iwl_sf_scenario {
1493         SF_SCENARIO_SINGLE_UNICAST,
1494         SF_SCENARIO_AGG_UNICAST,
1495         SF_SCENARIO_MULTICAST,
1496         SF_SCENARIO_BA_RESP,
1497         SF_SCENARIO_TX_RESP,
1498         SF_NUM_SCENARIO
1499 };
1500
1501 #define SF_TRANSIENT_STATES_NUMBER 2    /* SF_LONG_DELAY_ON and SF_FULL_ON */
1502 #define SF_NUM_TIMEOUT_TYPES 2          /* Aging timer and Idle timer */
1503
1504 /* smart FIFO default values */
1505 #define SF_W_MARK_SISO 6144
1506 #define SF_W_MARK_MIMO2 8192
1507 #define SF_W_MARK_MIMO3 6144
1508 #define SF_W_MARK_LEGACY 4096
1509 #define SF_W_MARK_SCAN 4096
1510
1511 /* SF Scenarios timers for default configuration (aligned to 32 uSec) */
1512 #define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160    /* 150 uSec  */
1513 #define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400   /* 0.4 mSec */
1514 #define SF_AGG_UNICAST_IDLE_TIMER_DEF 160               /* 150 uSec */
1515 #define SF_AGG_UNICAST_AGING_TIMER_DEF 400              /* 0.4 mSec */
1516 #define SF_MCAST_IDLE_TIMER_DEF 160             /* 150 mSec */
1517 #define SF_MCAST_AGING_TIMER_DEF 400            /* 0.4 mSec */
1518 #define SF_BA_IDLE_TIMER_DEF 160                        /* 150 uSec */
1519 #define SF_BA_AGING_TIMER_DEF 400                       /* 0.4 mSec */
1520 #define SF_TX_RE_IDLE_TIMER_DEF 160                     /* 150 uSec */
1521 #define SF_TX_RE_AGING_TIMER_DEF 400            /* 0.4 mSec */
1522
1523 /* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */
1524 #define SF_SINGLE_UNICAST_IDLE_TIMER 320        /* 300 uSec  */
1525 #define SF_SINGLE_UNICAST_AGING_TIMER 2016      /* 2 mSec */
1526 #define SF_AGG_UNICAST_IDLE_TIMER 320           /* 300 uSec */
1527 #define SF_AGG_UNICAST_AGING_TIMER 2016         /* 2 mSec */
1528 #define SF_MCAST_IDLE_TIMER 2016                /* 2 mSec */
1529 #define SF_MCAST_AGING_TIMER 10016              /* 10 mSec */
1530 #define SF_BA_IDLE_TIMER 320                    /* 300 uSec */
1531 #define SF_BA_AGING_TIMER 2016                  /* 2 mSec */
1532 #define SF_TX_RE_IDLE_TIMER 320                 /* 300 uSec */
1533 #define SF_TX_RE_AGING_TIMER 2016               /* 2 mSec */
1534
1535 #define SF_LONG_DELAY_AGING_TIMER 1000000       /* 1 Sec */
1536
1537 #define SF_CFG_DUMMY_NOTIF_OFF  BIT(16)
1538
1539 /**
1540  * Smart Fifo configuration command.
1541  * @state: smart fifo state, types listed in enum %iwl_sf_sate.
1542  * @watermark: Minimum allowed availabe free space in RXF for transient state.
1543  * @long_delay_timeouts: aging and idle timer values for each scenario
1544  * in long delay state.
1545  * @full_on_timeouts: timer values for each scenario in full on state.
1546  */
1547 struct iwl_sf_cfg_cmd {
1548         __le32 state;
1549         __le32 watermark[SF_TRANSIENT_STATES_NUMBER];
1550         __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
1551         __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
1552 } __packed; /* SF_CFG_API_S_VER_2 */
1553
1554 /***********************************
1555  * Location Aware Regulatory (LAR) API - MCC updates
1556  ***********************************/
1557
1558 /**
1559  * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic
1560  * regulatory profile according to the given MCC (Mobile Country Code).
1561  * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
1562  * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
1563  * MCC in the cmd response will be the relevant MCC in the NVM.
1564  * @mcc: given mobile country code
1565  * @source_id: the source from where we got the MCC, see iwl_mcc_source
1566  * @reserved: reserved for alignment
1567  */
1568 struct iwl_mcc_update_cmd_v1 {
1569         __le16 mcc;
1570         u8 source_id;
1571         u8 reserved;
1572 } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */
1573
1574 /**
1575  * struct iwl_mcc_update_cmd - Request the device to update geographic
1576  * regulatory profile according to the given MCC (Mobile Country Code).
1577  * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
1578  * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
1579  * MCC in the cmd response will be the relevant MCC in the NVM.
1580  * @mcc: given mobile country code
1581  * @source_id: the source from where we got the MCC, see iwl_mcc_source
1582  * @reserved: reserved for alignment
1583  * @key: integrity key for MCC API OEM testing
1584  * @reserved2: reserved
1585  */
1586 struct iwl_mcc_update_cmd {
1587         __le16 mcc;
1588         u8 source_id;
1589         u8 reserved;
1590         __le32 key;
1591         __le32 reserved2[5];
1592 } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
1593
1594 /**
1595  * iwl_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
1596  * Contains the new channel control profile map, if changed, and the new MCC
1597  * (mobile country code).
1598  * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
1599  * @status: see &enum iwl_mcc_update_status
1600  * @mcc: the new applied MCC
1601  * @cap: capabilities for all channels which matches the MCC
1602  * @source_id: the MCC source, see iwl_mcc_source
1603  * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
1604  *              channels, depending on platform)
1605  * @channels: channel control data map, DWORD for each channel. Only the first
1606  *      16bits are used.
1607  */
1608 struct iwl_mcc_update_resp_v1  {
1609         __le32 status;
1610         __le16 mcc;
1611         u8 cap;
1612         u8 source_id;
1613         __le32 n_channels;
1614         __le32 channels[0];
1615 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
1616
1617 /**
1618  * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
1619  * Contains the new channel control profile map, if changed, and the new MCC
1620  * (mobile country code).
1621  * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
1622  * @status: see &enum iwl_mcc_update_status
1623  * @mcc: the new applied MCC
1624  * @cap: capabilities for all channels which matches the MCC
1625  * @source_id: the MCC source, see iwl_mcc_source
1626  * @time: time elapsed from the MCC test start (in 30 seconds TU)
1627  * @reserved: reserved.
1628  * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
1629  *              channels, depending on platform)
1630  * @channels: channel control data map, DWORD for each channel. Only the first
1631  *      16bits are used.
1632  */
1633 struct iwl_mcc_update_resp {
1634         __le32 status;
1635         __le16 mcc;
1636         u8 cap;
1637         u8 source_id;
1638         __le16 time;
1639         __le16 reserved;
1640         __le32 n_channels;
1641         __le32 channels[0];
1642 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */
1643
1644 /**
1645  * struct iwl_mcc_chub_notif - chub notifies of mcc change
1646  * (MCC_CHUB_UPDATE_CMD = 0xc9)
1647  * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
1648  * the cellular and connectivity cores that gets updates of the mcc, and
1649  * notifies the ucode directly of any mcc change.
1650  * The ucode requests the driver to request the device to update geographic
1651  * regulatory  profile according to the given MCC (Mobile Country Code).
1652  * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
1653  * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
1654  * MCC in the cmd response will be the relevant MCC in the NVM.
1655  * @mcc: given mobile country code
1656  * @source_id: identity of the change originator, see iwl_mcc_source
1657  * @reserved1: reserved for alignment
1658  */
1659 struct iwl_mcc_chub_notif {
1660         u16 mcc;
1661         u8 source_id;
1662         u8 reserved1;
1663 } __packed; /* LAR_MCC_NOTIFY_S */
1664
1665 enum iwl_mcc_update_status {
1666         MCC_RESP_NEW_CHAN_PROFILE,
1667         MCC_RESP_SAME_CHAN_PROFILE,
1668         MCC_RESP_INVALID,
1669         MCC_RESP_NVM_DISABLED,
1670         MCC_RESP_ILLEGAL,
1671         MCC_RESP_LOW_PRIORITY,
1672         MCC_RESP_TEST_MODE_ACTIVE,
1673         MCC_RESP_TEST_MODE_NOT_ACTIVE,
1674         MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
1675 };
1676
1677 enum iwl_mcc_source {
1678         MCC_SOURCE_OLD_FW = 0,
1679         MCC_SOURCE_ME = 1,
1680         MCC_SOURCE_BIOS = 2,
1681         MCC_SOURCE_3G_LTE_HOST = 3,
1682         MCC_SOURCE_3G_LTE_DEVICE = 4,
1683         MCC_SOURCE_WIFI = 5,
1684         MCC_SOURCE_RESERVED = 6,
1685         MCC_SOURCE_DEFAULT = 7,
1686         MCC_SOURCE_UNINITIALIZED = 8,
1687         MCC_SOURCE_MCC_API = 9,
1688         MCC_SOURCE_GET_CURRENT = 0x10,
1689         MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
1690 };
1691
1692 /* DTS measurements */
1693
1694 enum iwl_dts_measurement_flags {
1695         DTS_TRIGGER_CMD_FLAGS_TEMP      = BIT(0),
1696         DTS_TRIGGER_CMD_FLAGS_VOLT      = BIT(1),
1697 };
1698
1699 /**
1700  * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
1701  *
1702  * @flags: indicates which measurements we want as specified in &enum
1703  *         iwl_dts_measurement_flags
1704  */
1705 struct iwl_dts_measurement_cmd {
1706         __le32 flags;
1707 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
1708
1709 /**
1710 * enum iwl_dts_control_measurement_mode - DTS measurement type
1711 * @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
1712 *                 back (latest value. Not waiting for new value). Use automatic
1713 *                 SW DTS configuration.
1714 * @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
1715 *                    trigger DTS reading and provide read back temperature read
1716 *                    when available.
1717 * @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
1718 * @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
1719 *                              without measurement trigger.
1720 */
1721 enum iwl_dts_control_measurement_mode {
1722         DTS_AUTOMATIC                   = 0,
1723         DTS_REQUEST_READ                = 1,
1724         DTS_OVER_WRITE                  = 2,
1725         DTS_DIRECT_WITHOUT_MEASURE      = 3,
1726 };
1727
1728 /**
1729 * enum iwl_dts_used - DTS to use or used for measurement in the DTS request
1730 * @DTS_USE_TOP: Top
1731 * @DTS_USE_CHAIN_A: chain A
1732 * @DTS_USE_CHAIN_B: chain B
1733 * @DTS_USE_CHAIN_C: chain C
1734 * @XTAL_TEMPERATURE - read temperature from xtal
1735 */
1736 enum iwl_dts_used {
1737         DTS_USE_TOP             = 0,
1738         DTS_USE_CHAIN_A         = 1,
1739         DTS_USE_CHAIN_B         = 2,
1740         DTS_USE_CHAIN_C         = 3,
1741         XTAL_TEMPERATURE        = 4,
1742 };
1743
1744 /**
1745 * enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
1746 * @DTS_BIT6_MODE: bit 6 mode
1747 * @DTS_BIT8_MODE: bit 8 mode
1748 */
1749 enum iwl_dts_bit_mode {
1750         DTS_BIT6_MODE   = 0,
1751         DTS_BIT8_MODE   = 1,
1752 };
1753
1754 /**
1755  * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
1756  * @control_mode: see &enum iwl_dts_control_measurement_mode
1757  * @temperature: used when over write DTS mode is selected
1758  * @sensor: set temperature sensor to use. See &enum iwl_dts_used
1759  * @avg_factor: average factor to DTS in request DTS read mode
1760  * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
1761  * @step_duration: step duration for the DTS
1762  */
1763 struct iwl_ext_dts_measurement_cmd {
1764         __le32 control_mode;
1765         __le32 temperature;
1766         __le32 sensor;
1767         __le32 avg_factor;
1768         __le32 bit_mode;
1769         __le32 step_duration;
1770 } __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
1771
1772 /**
1773  * struct iwl_dts_measurement_notif_v1 - measurements notification
1774  *
1775  * @temp: the measured temperature
1776  * @voltage: the measured voltage
1777  */
1778 struct iwl_dts_measurement_notif_v1 {
1779         __le32 temp;
1780         __le32 voltage;
1781 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
1782
1783 /**
1784  * struct iwl_dts_measurement_notif_v2 - measurements notification
1785  *
1786  * @temp: the measured temperature
1787  * @voltage: the measured voltage
1788  * @threshold_idx: the trip index that was crossed
1789  */
1790 struct iwl_dts_measurement_notif_v2 {
1791         __le32 temp;
1792         __le32 voltage;
1793         __le32 threshold_idx;
1794 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
1795
1796 /**
1797  * struct ct_kill_notif - CT-kill entry notification
1798  *
1799  * @temperature: the current temperature in celsius
1800  * @reserved: reserved
1801  */
1802 struct ct_kill_notif {
1803         __le16 temperature;
1804         __le16 reserved;
1805 } __packed; /* GRP_PHY_CT_KILL_NTF */
1806
1807 /**
1808 * enum ctdp_cmd_operation - CTDP command operations
1809 * @CTDP_CMD_OPERATION_START: update the current budget
1810 * @CTDP_CMD_OPERATION_STOP: stop ctdp
1811 * @CTDP_CMD_OPERATION_REPORT: get the avgerage budget
1812 */
1813 enum iwl_mvm_ctdp_cmd_operation {
1814         CTDP_CMD_OPERATION_START        = 0x1,
1815         CTDP_CMD_OPERATION_STOP         = 0x2,
1816         CTDP_CMD_OPERATION_REPORT       = 0x4,
1817 };/* CTDP_CMD_OPERATION_TYPE_E */
1818
1819 /**
1820  * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
1821  *
1822  * @operation: see &enum iwl_mvm_ctdp_cmd_operation
1823  * @budget: the budget in milliwatt
1824  * @window_size: defined in API but not used
1825  */
1826 struct iwl_mvm_ctdp_cmd {
1827         __le32 operation;
1828         __le32 budget;
1829         __le32 window_size;
1830 } __packed;
1831
1832 #define IWL_MAX_DTS_TRIPS       8
1833
1834 /**
1835  * struct iwl_temp_report_ths_cmd - set temperature thresholds
1836  *
1837  * @num_temps: number of temperature thresholds passed
1838  * @thresholds: array with the thresholds to be configured
1839  */
1840 struct temp_report_ths_cmd {
1841         __le32 num_temps;
1842         __le16 thresholds[IWL_MAX_DTS_TRIPS];
1843 } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
1844
1845 /***********************************
1846  * TDLS API
1847  ***********************************/
1848
1849 /* Type of TDLS request */
1850 enum iwl_tdls_channel_switch_type {
1851         TDLS_SEND_CHAN_SW_REQ = 0,
1852         TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
1853         TDLS_MOVE_CH,
1854 }; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
1855
1856 /**
1857  * Switch timing sub-element in a TDLS channel-switch command
1858  * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
1859  *      received from peer
1860  * @max_offchan_duration: What amount of microseconds out of a DTIM is given
1861  *      to the TDLS off-channel communication. For instance if the DTIM is
1862  *      200TU and the TDLS peer is to be given 25% of the time, the value
1863  *      given will be 50TU, or 50 * 1024 if translated into microseconds.
1864  * @switch_time: switch time the peer sent in its channel switch timing IE
1865  * @switch_timout: switch timeout the peer sent in its channel switch timing IE
1866  */
1867 struct iwl_tdls_channel_switch_timing {
1868         __le32 frame_timestamp; /* GP2 time of peer packet Rx */
1869         __le32 max_offchan_duration; /* given in micro-seconds */
1870         __le32 switch_time; /* given in micro-seconds */
1871         __le32 switch_timeout; /* given in micro-seconds */
1872 } __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */
1873
1874 #define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
1875
1876 /**
1877  * TDLS channel switch frame template
1878  *
1879  * A template representing a TDLS channel-switch request or response frame
1880  *
1881  * @switch_time_offset: offset to the channel switch timing IE in the template
1882  * @tx_cmd: Tx parameters for the frame
1883  * @data: frame data
1884  */
1885 struct iwl_tdls_channel_switch_frame {
1886         __le32 switch_time_offset;
1887         struct iwl_tx_cmd tx_cmd;
1888         u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
1889 } __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
1890
1891 /**
1892  * TDLS channel switch command
1893  *
1894  * The command is sent to initiate a channel switch and also in response to
1895  * incoming TDLS channel-switch request/response packets from remote peers.
1896  *
1897  * @switch_type: see &enum iwl_tdls_channel_switch_type
1898  * @peer_sta_id: station id of TDLS peer
1899  * @ci: channel we switch to
1900  * @timing: timing related data for command
1901  * @frame: channel-switch request/response template, depending to switch_type
1902  */
1903 struct iwl_tdls_channel_switch_cmd {
1904         u8 switch_type;
1905         __le32 peer_sta_id;
1906         struct iwl_fw_channel_info ci;
1907         struct iwl_tdls_channel_switch_timing timing;
1908         struct iwl_tdls_channel_switch_frame frame;
1909 } __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
1910
1911 /**
1912  * TDLS channel switch start notification
1913  *
1914  * @status: non-zero on success
1915  * @offchannel_duration: duration given in microseconds
1916  * @sta_id: peer currently performing the channel-switch with
1917  */
1918 struct iwl_tdls_channel_switch_notif {
1919         __le32 status;
1920         __le32 offchannel_duration;
1921         __le32 sta_id;
1922 } __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
1923
1924 /**
1925  * TDLS station info
1926  *
1927  * @sta_id: station id of the TDLS peer
1928  * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
1929  * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer
1930  * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise
1931  */
1932 struct iwl_tdls_sta_info {
1933         u8 sta_id;
1934         u8 tx_to_peer_tid;
1935         __le16 tx_to_peer_ssn;
1936         __le32 is_initiator;
1937 } __packed; /* TDLS_STA_INFO_VER_1 */
1938
1939 /**
1940  * TDLS basic config command
1941  *
1942  * @id_and_color: MAC id and color being configured
1943  * @tdls_peer_count: amount of currently connected TDLS peers
1944  * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx
1945  * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP
1946  * @sta_info: per-station info. Only the first tdls_peer_count entries are set
1947  * @pti_req_data_offset: offset of network-level data for the PTI template
1948  * @pti_req_tx_cmd: Tx parameters for PTI request template
1949  * @pti_req_template: PTI request template data
1950  */
1951 struct iwl_tdls_config_cmd {
1952         __le32 id_and_color; /* mac id and color */
1953         u8 tdls_peer_count;
1954         u8 tx_to_ap_tid;
1955         __le16 tx_to_ap_ssn;
1956         struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT];
1957
1958         __le32 pti_req_data_offset;
1959         struct iwl_tx_cmd pti_req_tx_cmd;
1960         u8 pti_req_template[0];
1961 } __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
1962
1963 /**
1964  * TDLS per-station config information from FW
1965  *
1966  * @sta_id: station id of the TDLS peer
1967  * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
1968  *      the peer
1969  */
1970 struct iwl_tdls_config_sta_info_res {
1971         __le16 sta_id;
1972         __le16 tx_to_peer_last_seq;
1973 } __packed; /* TDLS_STA_INFO_RSP_VER_1 */
1974
1975 /**
1976  * TDLS config information from FW
1977  *
1978  * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
1979  * @sta_info: per-station TDLS config information
1980  */
1981 struct iwl_tdls_config_res {
1982         __le32 tx_to_ap_last_seq;
1983         struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT];
1984 } __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */
1985
1986 #define TX_FIFO_MAX_NUM_9000            8
1987 #define TX_FIFO_MAX_NUM                 15
1988 #define RX_FIFO_MAX_NUM                 2
1989 #define TX_FIFO_INTERNAL_MAX_NUM        6
1990
1991 /**
1992  * Shared memory configuration information from the FW
1993  *
1994  * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
1995  *      accessible)
1996  * @shared_mem_size: shared memory size
1997  * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to
1998  *      0x0 as accessible only via DBGM RDAT)
1999  * @sample_buff_size: internal sample buff size
2000  * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre
2001  *      8000 HW set to 0x0 as not accessible)
2002  * @txfifo_size: size of TXF0 ... TXF7
2003  * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0
2004  * @page_buff_addr: used by UMAC and performance debug (page miss analysis),
2005  *      when paging is not supported this should be 0
2006  * @page_buff_size: size of %page_buff_addr
2007  * @rxfifo_addr: Start address of rxFifo
2008  * @internal_txfifo_addr: start address of internalFifo
2009  * @internal_txfifo_size: internal fifos' size
2010  *
2011  * NOTE: on firmware that don't have IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG
2012  *       set, the last 3 members don't exist.
2013  */
2014 struct iwl_shared_mem_cfg_v1 {
2015         __le32 shared_mem_addr;
2016         __le32 shared_mem_size;
2017         __le32 sample_buff_addr;
2018         __le32 sample_buff_size;
2019         __le32 txfifo_addr;
2020         __le32 txfifo_size[TX_FIFO_MAX_NUM_9000];
2021         __le32 rxfifo_size[RX_FIFO_MAX_NUM];
2022         __le32 page_buff_addr;
2023         __le32 page_buff_size;
2024         __le32 rxfifo_addr;
2025         __le32 internal_txfifo_addr;
2026         __le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM];
2027 } __packed; /* SHARED_MEM_ALLOC_API_S_VER_2 */
2028
2029 struct iwl_shared_mem_cfg {
2030         __le32 shared_mem_addr;
2031         __le32 shared_mem_size;
2032         __le32 sample_buff_addr;
2033         __le32 sample_buff_size;
2034         __le32 txfifo_addr;
2035         __le32 txfifo_size[TX_FIFO_MAX_NUM];
2036         __le32 rxfifo_size[RX_FIFO_MAX_NUM];
2037         __le32 page_buff_addr;
2038         __le32 page_buff_size;
2039         __le32 rxfifo_addr;
2040         __le32 internal_txfifo_addr;
2041         __le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM];
2042 } __packed; /* SHARED_MEM_ALLOC_API_S_VER_3 */
2043
2044 /**
2045  * VHT MU-MIMO group configuration
2046  *
2047  * @membership_status: a bitmap of MU groups
2048  * @user_position:the position of station in a group. If the station is in the
2049  *      group then bits (group * 2) is the position -1
2050  */
2051 struct iwl_mu_group_mgmt_cmd {
2052         __le32 reserved;
2053         __le32 membership_status[2];
2054         __le32 user_position[4];
2055 } __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */
2056
2057 /**
2058  * struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification
2059  *
2060  * @membership_status: a bitmap of MU groups
2061  * @user_position: the position of station in a group. If the station is in the
2062  *      group then bits (group * 2) is the position -1
2063  */
2064 struct iwl_mu_group_mgmt_notif {
2065         __le32 membership_status[2];
2066         __le32 user_position[4];
2067 } __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */
2068
2069 #define MAX_STORED_BEACON_SIZE 600
2070
2071 /**
2072  * Stored beacon notification
2073  *
2074  * @system_time: system time on air rise
2075  * @tsf: TSF on air rise
2076  * @beacon_timestamp: beacon on air rise
2077  * @phy_flags: general phy flags: band, modulation, etc.
2078  * @channel: channel this beacon was received on
2079  * @rates: rate in ucode internal format
2080  * @byte_count: frame's byte count
2081  */
2082 struct iwl_stored_beacon_notif {
2083         __le32 system_time;
2084         __le64 tsf;
2085         __le32 beacon_timestamp;
2086         __le16 phy_flags;
2087         __le16 channel;
2088         __le32 rates;
2089         __le32 byte_count;
2090         u8 data[MAX_STORED_BEACON_SIZE];
2091 } __packed; /* WOWLAN_STROED_BEACON_INFO_S_VER_1 */
2092
2093 #define LQM_NUMBER_OF_STATIONS_IN_REPORT 16
2094
2095 enum iwl_lqm_cmd_operatrions {
2096         LQM_CMD_OPERATION_START_MEASUREMENT = 0x01,
2097         LQM_CMD_OPERATION_STOP_MEASUREMENT = 0x02,
2098 };
2099
2100 enum iwl_lqm_status {
2101         LQM_STATUS_SUCCESS = 0,
2102         LQM_STATUS_TIMEOUT = 1,
2103         LQM_STATUS_ABORT = 2,
2104 };
2105
2106 /**
2107  * Link Quality Measurement command
2108  * @cmd_operatrion: command operation to be performed (start or stop)
2109  *      as defined above.
2110  * @mac_id: MAC ID the measurement applies to.
2111  * @measurement_time: time of the total measurement to be performed, in uSec.
2112  * @timeout: maximum time allowed until a response is sent, in uSec.
2113  */
2114 struct iwl_link_qual_msrmnt_cmd {
2115         __le32 cmd_operation;
2116         __le32 mac_id;
2117         __le32 measurement_time;
2118         __le32 timeout;
2119 } __packed /* LQM_CMD_API_S_VER_1 */;
2120
2121 /**
2122  * Link Quality Measurement notification
2123  *
2124  * @frequent_stations_air_time: an array containing the total air time
2125  *      (in uSec) used by the most frequently transmitting stations.
2126  * @number_of_stations: the number of uniqe stations included in the array
2127  *      (a number between 0 to 16)
2128  * @total_air_time_other_stations: the total air time (uSec) used by all the
2129  *      stations which are not included in the above report.
2130  * @time_in_measurement_window: the total time in uSec in which a measurement
2131  *      took place.
2132  * @tx_frame_dropped: the number of TX frames dropped due to retry limit during
2133  *      measurement
2134  * @mac_id: MAC ID the measurement applies to.
2135  * @status: return status. may be one of the LQM_STATUS_* defined above.
2136  * @reserved: reserved.
2137  */
2138 struct iwl_link_qual_msrmnt_notif {
2139         __le32 frequent_stations_air_time[LQM_NUMBER_OF_STATIONS_IN_REPORT];
2140         __le32 number_of_stations;
2141         __le32 total_air_time_other_stations;
2142         __le32 time_in_measurement_window;
2143         __le32 tx_frame_dropped;
2144         __le32 mac_id;
2145         __le32 status;
2146         __le32 reserved[3];
2147 } __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */
2148
2149 /**
2150  * Channel switch NOA notification
2151  *
2152  * @id_and_color: ID and color of the MAC
2153  */
2154 struct iwl_channel_switch_noa_notif {
2155         __le32 id_and_color;
2156 } __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */
2157
2158 /* Operation types for the debug mem access */
2159 enum {
2160         DEBUG_MEM_OP_READ = 0,
2161         DEBUG_MEM_OP_WRITE = 1,
2162         DEBUG_MEM_OP_WRITE_BYTES = 2,
2163 };
2164
2165 #define DEBUG_MEM_MAX_SIZE_DWORDS 32
2166
2167 /**
2168  * struct iwl_dbg_mem_access_cmd - Request the device to read/write memory
2169  * @op: DEBUG_MEM_OP_*
2170  * @addr: address to read/write from/to
2171  * @len: in dwords, to read/write
2172  * @data: for write opeations, contains the source buffer
2173  */
2174 struct iwl_dbg_mem_access_cmd {
2175         __le32 op;
2176         __le32 addr;
2177         __le32 len;
2178         __le32 data[];
2179 } __packed; /* DEBUG_(U|L)MAC_RD_WR_CMD_API_S_VER_1 */
2180
2181 /* Status responses for the debug mem access */
2182 enum {
2183         DEBUG_MEM_STATUS_SUCCESS = 0x0,
2184         DEBUG_MEM_STATUS_FAILED = 0x1,
2185         DEBUG_MEM_STATUS_LOCKED = 0x2,
2186         DEBUG_MEM_STATUS_HIDDEN = 0x3,
2187         DEBUG_MEM_STATUS_LENGTH = 0x4,
2188 };
2189
2190 /**
2191  * struct iwl_dbg_mem_access_rsp - Response to debug mem commands
2192  * @status: DEBUG_MEM_STATUS_*
2193  * @len: read dwords (0 for write operations)
2194  * @data: contains the read DWs
2195  */
2196 struct iwl_dbg_mem_access_rsp {
2197         __le32 status;
2198         __le32 len;
2199         __le32 data[];
2200 } __packed; /* DEBUG_(U|L)MAC_RD_WR_RSP_API_S_VER_1 */
2201
2202 #endif /* __fw_api_h__ */