GNU Linux-libre 4.19.286-gnu1
[releases.git] / drivers / net / wireless / marvell / mwifiex / sta_ioctl.c
1 /*
2  * Marvell Wireless LAN device driver: functions for station ioctl
3  *
4  * Copyright (C) 2011-2014, Marvell International Ltd.
5  *
6  * This software file (the "File") is distributed by Marvell International
7  * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8  * (the "License").  You may use, redistribute and/or modify this File in
9  * accordance with the terms and conditions of the License, a copy of which
10  * is available by writing to the Free Software Foundation, Inc.,
11  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12  * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
13  *
14  * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15  * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16  * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
17  * this warranty disclaimer.
18  */
19
20 #include "decl.h"
21 #include "ioctl.h"
22 #include "util.h"
23 #include "fw.h"
24 #include "main.h"
25 #include "wmm.h"
26 #include "11n.h"
27 #include "cfg80211.h"
28
29 static int disconnect_on_suspend;
30 module_param(disconnect_on_suspend, int, 0644);
31
32 /*
33  * Copies the multicast address list from device to driver.
34  *
35  * This function does not validate the destination memory for
36  * size, and the calling function must ensure enough memory is
37  * available.
38  */
39 int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
40                             struct net_device *dev)
41 {
42         int i = 0;
43         struct netdev_hw_addr *ha;
44
45         netdev_for_each_mc_addr(ha, dev)
46                 memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);
47
48         return i;
49 }
50
51 /*
52  * Wait queue completion handler.
53  *
54  * This function waits on a cmd wait queue. It also cancels the pending
55  * request after waking up, in case of errors.
56  */
57 int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
58                                 struct cmd_ctrl_node *cmd_queued)
59 {
60         int status;
61
62         /* Wait for completion */
63         status = wait_event_interruptible_timeout(adapter->cmd_wait_q.wait,
64                                                   *(cmd_queued->condition),
65                                                   (12 * HZ));
66         if (status <= 0) {
67                 if (status == 0)
68                         status = -ETIMEDOUT;
69                 mwifiex_dbg(adapter, ERROR, "cmd_wait_q terminated: %d\n",
70                             status);
71                 mwifiex_cancel_all_pending_cmd(adapter);
72                 return status;
73         }
74
75         status = adapter->cmd_wait_q.status;
76         adapter->cmd_wait_q.status = 0;
77
78         return status;
79 }
80
81 /*
82  * This function prepares the correct firmware command and
83  * issues it to set the multicast list.
84  *
85  * This function can be used to enable promiscuous mode, or enable all
86  * multicast packets, or to enable selective multicast.
87  */
88 int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
89                                 struct mwifiex_multicast_list *mcast_list)
90 {
91         int ret = 0;
92         u16 old_pkt_filter;
93
94         old_pkt_filter = priv->curr_pkt_filter;
95
96         if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
97                 mwifiex_dbg(priv->adapter, INFO,
98                             "info: Enable Promiscuous mode\n");
99                 priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
100                 priv->curr_pkt_filter &=
101                         ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
102         } else {
103                 /* Multicast */
104                 priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
105                 if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
106                         mwifiex_dbg(priv->adapter, INFO,
107                                     "info: Enabling All Multicast!\n");
108                         priv->curr_pkt_filter |=
109                                 HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
110                 } else {
111                         priv->curr_pkt_filter &=
112                                 ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
113                         mwifiex_dbg(priv->adapter, INFO,
114                                     "info: Set multicast list=%d\n",
115                                     mcast_list->num_multicast_addr);
116                         /* Send multicast addresses to firmware */
117                         ret = mwifiex_send_cmd(priv,
118                                                HostCmd_CMD_MAC_MULTICAST_ADR,
119                                                HostCmd_ACT_GEN_SET, 0,
120                                                mcast_list, false);
121                 }
122         }
123         mwifiex_dbg(priv->adapter, INFO,
124                     "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
125                     old_pkt_filter, priv->curr_pkt_filter);
126         if (old_pkt_filter != priv->curr_pkt_filter) {
127                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
128                                        HostCmd_ACT_GEN_SET,
129                                        0, &priv->curr_pkt_filter, false);
130         }
131
132         return ret;
133 }
134
135 /*
136  * This function fills bss descriptor structure using provided
137  * information.
138  * beacon_ie buffer is allocated in this function. It is caller's
139  * responsibility to free the memory.
140  */
141 int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
142                               struct cfg80211_bss *bss,
143                               struct mwifiex_bssdescriptor *bss_desc)
144 {
145         u8 *beacon_ie;
146         size_t beacon_ie_len;
147         struct mwifiex_bss_priv *bss_priv = (void *)bss->priv;
148         const struct cfg80211_bss_ies *ies;
149
150         rcu_read_lock();
151         ies = rcu_dereference(bss->ies);
152         beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC);
153         beacon_ie_len = ies->len;
154         bss_desc->timestamp = ies->tsf;
155         rcu_read_unlock();
156
157         if (!beacon_ie) {
158                 mwifiex_dbg(priv->adapter, ERROR,
159                             " failed to alloc beacon_ie\n");
160                 return -ENOMEM;
161         }
162
163         memcpy(bss_desc->mac_address, bss->bssid, ETH_ALEN);
164         bss_desc->rssi = bss->signal;
165         /* The caller of this function will free beacon_ie */
166         bss_desc->beacon_buf = beacon_ie;
167         bss_desc->beacon_buf_size = beacon_ie_len;
168         bss_desc->beacon_period = bss->beacon_interval;
169         bss_desc->cap_info_bitmap = bss->capability;
170         bss_desc->bss_band = bss_priv->band;
171         bss_desc->fw_tsf = bss_priv->fw_tsf;
172         if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) {
173                 mwifiex_dbg(priv->adapter, INFO,
174                             "info: InterpretIE: AP WEP enabled\n");
175                 bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
176         } else {
177                 bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
178         }
179         if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_IBSS)
180                 bss_desc->bss_mode = NL80211_IFTYPE_ADHOC;
181         else
182                 bss_desc->bss_mode = NL80211_IFTYPE_STATION;
183
184         /* Disable 11ac by default. Enable it only where there
185          * exist VHT_CAP IE in AP beacon
186          */
187         bss_desc->disable_11ac = true;
188
189         if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
190                 bss_desc->sensed_11h = true;
191
192         return mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
193 }
194
195 void mwifiex_dnld_txpwr_table(struct mwifiex_private *priv)
196 {
197         if (priv->adapter->dt_node) {
198                 char txpwr[] = {"marvell,00_txpwrlimit"};
199
200                 memcpy(&txpwr[8], priv->adapter->country_code, 2);
201                 mwifiex_dnld_dt_cfgdata(priv, priv->adapter->dt_node, txpwr);
202         }
203 }
204
205 static int mwifiex_process_country_ie(struct mwifiex_private *priv,
206                                       struct cfg80211_bss *bss)
207 {
208         const u8 *country_ie;
209         u8 country_ie_len;
210         struct mwifiex_802_11d_domain_reg *domain_info =
211                                         &priv->adapter->domain_reg;
212
213         rcu_read_lock();
214         country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
215         if (!country_ie) {
216                 rcu_read_unlock();
217                 return 0;
218         }
219
220         country_ie_len = country_ie[1];
221         if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) {
222                 rcu_read_unlock();
223                 return 0;
224         }
225
226         if (!strncmp(priv->adapter->country_code, &country_ie[2], 2)) {
227                 rcu_read_unlock();
228                 mwifiex_dbg(priv->adapter, INFO,
229                             "11D: skip setting domain info in FW\n");
230                 return 0;
231         }
232
233         if (country_ie_len >
234             (IEEE80211_COUNTRY_STRING_LEN + MWIFIEX_MAX_TRIPLET_802_11D)) {
235                 rcu_read_unlock();
236                 mwifiex_dbg(priv->adapter, ERROR,
237                             "11D: country_ie_len overflow!, deauth AP\n");
238                 return -EINVAL;
239         }
240
241         memcpy(priv->adapter->country_code, &country_ie[2], 2);
242
243         domain_info->country_code[0] = country_ie[2];
244         domain_info->country_code[1] = country_ie[3];
245         domain_info->country_code[2] = ' ';
246
247         country_ie_len -= IEEE80211_COUNTRY_STRING_LEN;
248
249         domain_info->no_of_triplet =
250                 country_ie_len / sizeof(struct ieee80211_country_ie_triplet);
251
252         memcpy((u8 *)domain_info->triplet,
253                &country_ie[2] + IEEE80211_COUNTRY_STRING_LEN, country_ie_len);
254
255         rcu_read_unlock();
256
257         if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
258                              HostCmd_ACT_GEN_SET, 0, NULL, false)) {
259                 mwifiex_dbg(priv->adapter, ERROR,
260                             "11D: setting domain info in FW fail\n");
261                 return -1;
262         }
263
264         mwifiex_dnld_txpwr_table(priv);
265
266         return 0;
267 }
268
269 /*
270  * In Ad-Hoc mode, the IBSS is created if not found in scan list.
271  * In both Ad-Hoc and infra mode, an deauthentication is performed
272  * first.
273  */
274 int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
275                       struct cfg80211_ssid *req_ssid)
276 {
277         int ret;
278         struct mwifiex_adapter *adapter = priv->adapter;
279         struct mwifiex_bssdescriptor *bss_desc = NULL;
280
281         priv->scan_block = false;
282
283         if (bss) {
284                 if (adapter->region_code == 0x00 &&
285                     mwifiex_process_country_ie(priv, bss))
286                         return -EINVAL;
287
288                 /* Allocate and fill new bss descriptor */
289                 bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
290                                    GFP_KERNEL);
291                 if (!bss_desc)
292                         return -ENOMEM;
293
294                 ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
295                 if (ret)
296                         goto done;
297         }
298
299         if (priv->bss_mode == NL80211_IFTYPE_STATION ||
300             priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
301                 u8 config_bands;
302
303                 if (!bss_desc)
304                         return -1;
305
306                 if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
307                                                 HostCmd_SCAN_RADIO_TYPE_BG) {
308                         config_bands = BAND_B | BAND_G | BAND_GN;
309                 } else {
310                         config_bands = BAND_A | BAND_AN;
311                         if (adapter->fw_bands & BAND_AAC)
312                                 config_bands |= BAND_AAC;
313                 }
314
315                 if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
316                         adapter->config_bands = config_bands;
317
318                 ret = mwifiex_check_network_compatibility(priv, bss_desc);
319                 if (ret)
320                         goto done;
321
322                 if (mwifiex_11h_get_csa_closed_channel(priv) ==
323                                                         (u8)bss_desc->channel) {
324                         mwifiex_dbg(adapter, ERROR,
325                                     "Attempt to reconnect on csa closed chan(%d)\n",
326                                     bss_desc->channel);
327                         ret = -1;
328                         goto done;
329                 }
330
331                 mwifiex_dbg(adapter, INFO,
332                             "info: SSID found in scan list ...\t"
333                             "associating...\n");
334
335                 mwifiex_stop_net_dev_queue(priv->netdev, adapter);
336                 if (netif_carrier_ok(priv->netdev))
337                         netif_carrier_off(priv->netdev);
338
339                 /* Clear any past association response stored for
340                  * application retrieval */
341                 priv->assoc_rsp_size = 0;
342                 ret = mwifiex_associate(priv, bss_desc);
343
344                 /* If auth type is auto and association fails using open mode,
345                  * try to connect using shared mode */
346                 if (ret == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
347                     priv->sec_info.is_authtype_auto &&
348                     priv->sec_info.wep_enabled) {
349                         priv->sec_info.authentication_mode =
350                                                 NL80211_AUTHTYPE_SHARED_KEY;
351                         ret = mwifiex_associate(priv, bss_desc);
352                 }
353
354                 if (bss)
355                         cfg80211_put_bss(priv->adapter->wiphy, bss);
356         } else {
357                 /* Adhoc mode */
358                 /* If the requested SSID matches current SSID, return */
359                 if (bss_desc && bss_desc->ssid.ssid_len &&
360                     (!mwifiex_ssid_cmp(&priv->curr_bss_params.bss_descriptor.
361                                        ssid, &bss_desc->ssid))) {
362                         ret = 0;
363                         goto done;
364                 }
365
366                 priv->adhoc_is_link_sensed = false;
367
368                 ret = mwifiex_check_network_compatibility(priv, bss_desc);
369
370                 mwifiex_stop_net_dev_queue(priv->netdev, adapter);
371                 if (netif_carrier_ok(priv->netdev))
372                         netif_carrier_off(priv->netdev);
373
374                 if (!ret) {
375                         mwifiex_dbg(adapter, INFO,
376                                     "info: network found in scan\t"
377                                     " list. Joining...\n");
378                         ret = mwifiex_adhoc_join(priv, bss_desc);
379                         if (bss)
380                                 cfg80211_put_bss(priv->adapter->wiphy, bss);
381                 } else {
382                         mwifiex_dbg(adapter, INFO,
383                                     "info: Network not found in\t"
384                                     "the list, creating adhoc with ssid = %s\n",
385                                     req_ssid->ssid);
386                         ret = mwifiex_adhoc_start(priv, req_ssid);
387                 }
388         }
389
390 done:
391         /* beacon_ie buffer was allocated in function
392          * mwifiex_fill_new_bss_desc(). Free it now.
393          */
394         if (bss_desc)
395                 kfree(bss_desc->beacon_buf);
396         kfree(bss_desc);
397
398         if (ret < 0)
399                 priv->attempted_bss_desc = NULL;
400
401         return ret;
402 }
403
404 /*
405  * IOCTL request handler to set host sleep configuration.
406  *
407  * This function prepares the correct firmware command and
408  * issues it.
409  */
410 int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
411                           int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
412
413 {
414         struct mwifiex_adapter *adapter = priv->adapter;
415         int status = 0;
416         u32 prev_cond = 0;
417
418         if (!hs_cfg)
419                 return -ENOMEM;
420
421         switch (action) {
422         case HostCmd_ACT_GEN_SET:
423                 if (adapter->pps_uapsd_mode) {
424                         mwifiex_dbg(adapter, INFO,
425                                     "info: Host Sleep IOCTL\t"
426                                     "is blocked in UAPSD/PPS mode\n");
427                         status = -1;
428                         break;
429                 }
430                 if (hs_cfg->is_invoke_hostcmd) {
431                         if (hs_cfg->conditions == HS_CFG_CANCEL) {
432                                 if (!test_bit(MWIFIEX_IS_HS_CONFIGURED,
433                                               &adapter->work_flags))
434                                         /* Already cancelled */
435                                         break;
436                                 /* Save previous condition */
437                                 prev_cond = le32_to_cpu(adapter->hs_cfg
438                                                         .conditions);
439                                 adapter->hs_cfg.conditions =
440                                                 cpu_to_le32(hs_cfg->conditions);
441                         } else if (hs_cfg->conditions) {
442                                 adapter->hs_cfg.conditions =
443                                                 cpu_to_le32(hs_cfg->conditions);
444                                 adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
445                                 if (hs_cfg->gap)
446                                         adapter->hs_cfg.gap = (u8)hs_cfg->gap;
447                         } else if (adapter->hs_cfg.conditions ==
448                                    cpu_to_le32(HS_CFG_CANCEL)) {
449                                 /* Return failure if no parameters for HS
450                                    enable */
451                                 status = -1;
452                                 break;
453                         }
454
455                         status = mwifiex_send_cmd(priv,
456                                                   HostCmd_CMD_802_11_HS_CFG_ENH,
457                                                   HostCmd_ACT_GEN_SET, 0,
458                                                   &adapter->hs_cfg,
459                                                   cmd_type == MWIFIEX_SYNC_CMD);
460
461                         if (hs_cfg->conditions == HS_CFG_CANCEL)
462                                 /* Restore previous condition */
463                                 adapter->hs_cfg.conditions =
464                                                 cpu_to_le32(prev_cond);
465                 } else {
466                         adapter->hs_cfg.conditions =
467                                                 cpu_to_le32(hs_cfg->conditions);
468                         adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
469                         adapter->hs_cfg.gap = (u8)hs_cfg->gap;
470                 }
471                 break;
472         case HostCmd_ACT_GEN_GET:
473                 hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
474                 hs_cfg->gpio = adapter->hs_cfg.gpio;
475                 hs_cfg->gap = adapter->hs_cfg.gap;
476                 break;
477         default:
478                 status = -1;
479                 break;
480         }
481
482         return status;
483 }
484
485 /*
486  * Sends IOCTL request to cancel the existing Host Sleep configuration.
487  *
488  * This function allocates the IOCTL request buffer, fills it
489  * with requisite parameters and calls the IOCTL handler.
490  */
491 int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
492 {
493         struct mwifiex_ds_hs_cfg hscfg;
494
495         hscfg.conditions = HS_CFG_CANCEL;
496         hscfg.is_invoke_hostcmd = true;
497
498         return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
499                                     cmd_type, &hscfg);
500 }
501 EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);
502
503 /*
504  * Sends IOCTL request to cancel the existing Host Sleep configuration.
505  *
506  * This function allocates the IOCTL request buffer, fills it
507  * with requisite parameters and calls the IOCTL handler.
508  */
509 int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
510 {
511         struct mwifiex_ds_hs_cfg hscfg;
512         struct mwifiex_private *priv;
513         int i;
514
515         if (disconnect_on_suspend) {
516                 for (i = 0; i < adapter->priv_num; i++) {
517                         priv = adapter->priv[i];
518                         if (priv)
519                                 mwifiex_deauthenticate(priv, NULL);
520                 }
521         }
522
523         priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA);
524
525         if (priv && priv->sched_scanning) {
526 #ifdef CONFIG_PM
527                 if (priv->wdev.wiphy->wowlan_config &&
528                     !priv->wdev.wiphy->wowlan_config->nd_config) {
529 #endif
530                         mwifiex_dbg(adapter, CMD, "aborting bgscan!\n");
531                         mwifiex_stop_bg_scan(priv);
532                         cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
533 #ifdef CONFIG_PM
534                 }
535 #endif
536         }
537
538         if (adapter->hs_activated) {
539                 mwifiex_dbg(adapter, CMD,
540                             "cmd: HS Already activated\n");
541                 return true;
542         }
543
544         adapter->hs_activate_wait_q_woken = false;
545
546         memset(&hscfg, 0, sizeof(hscfg));
547         hscfg.is_invoke_hostcmd = true;
548
549         set_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags);
550         mwifiex_cancel_all_pending_cmd(adapter);
551
552         if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
553                                                    MWIFIEX_BSS_ROLE_STA),
554                                   HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
555                                   &hscfg)) {
556                 mwifiex_dbg(adapter, ERROR,
557                             "IOCTL request HS enable failed\n");
558                 return false;
559         }
560
561         if (wait_event_interruptible_timeout(adapter->hs_activate_wait_q,
562                                              adapter->hs_activate_wait_q_woken,
563                                              (10 * HZ)) <= 0) {
564                 mwifiex_dbg(adapter, ERROR,
565                             "hs_activate_wait_q terminated\n");
566                 return false;
567         }
568
569         return true;
570 }
571 EXPORT_SYMBOL_GPL(mwifiex_enable_hs);
572
573 /*
574  * IOCTL request handler to get BSS information.
575  *
576  * This function collates the information from different driver structures
577  * to send to the user.
578  */
579 int mwifiex_get_bss_info(struct mwifiex_private *priv,
580                          struct mwifiex_bss_info *info)
581 {
582         struct mwifiex_adapter *adapter = priv->adapter;
583         struct mwifiex_bssdescriptor *bss_desc;
584
585         if (!info)
586                 return -1;
587
588         bss_desc = &priv->curr_bss_params.bss_descriptor;
589
590         info->bss_mode = priv->bss_mode;
591
592         memcpy(&info->ssid, &bss_desc->ssid, sizeof(struct cfg80211_ssid));
593
594         memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);
595
596         info->bss_chan = bss_desc->channel;
597
598         memcpy(info->country_code, adapter->country_code,
599                IEEE80211_COUNTRY_STRING_LEN);
600
601         info->media_connected = priv->media_connected;
602
603         info->max_power_level = priv->max_tx_power_level;
604         info->min_power_level = priv->min_tx_power_level;
605
606         info->adhoc_state = priv->adhoc_state;
607
608         info->bcn_nf_last = priv->bcn_nf_last;
609
610         if (priv->sec_info.wep_enabled)
611                 info->wep_status = true;
612         else
613                 info->wep_status = false;
614
615         info->is_hs_configured = test_bit(MWIFIEX_IS_HS_CONFIGURED,
616                                           &adapter->work_flags);
617         info->is_deep_sleep = adapter->is_deep_sleep;
618
619         return 0;
620 }
621
622 /*
623  * The function disables auto deep sleep mode.
624  */
625 int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
626 {
627         struct mwifiex_ds_auto_ds auto_ds = {
628                 .auto_ds = DEEP_SLEEP_OFF,
629         };
630
631         return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
632                                 DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds, true);
633 }
634 EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);
635
636 /*
637  * Sends IOCTL request to get the data rate.
638  *
639  * This function allocates the IOCTL request buffer, fills it
640  * with requisite parameters and calls the IOCTL handler.
641  */
642 int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
643 {
644         int ret;
645
646         ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
647                                HostCmd_ACT_GEN_GET, 0, NULL, true);
648
649         if (!ret) {
650                 if (priv->is_data_rate_auto)
651                         *rate = mwifiex_index_to_data_rate(priv, priv->tx_rate,
652                                                            priv->tx_htinfo);
653                 else
654                         *rate = priv->data_rate;
655         }
656
657         return ret;
658 }
659
660 /*
661  * IOCTL request handler to set tx power configuration.
662  *
663  * This function prepares the correct firmware command and
664  * issues it.
665  *
666  * For non-auto power mode, all the following power groups are set -
667  *      - Modulation class HR/DSSS
668  *      - Modulation class OFDM
669  *      - Modulation class HTBW20
670  *      - Modulation class HTBW40
671  */
672 int mwifiex_set_tx_power(struct mwifiex_private *priv,
673                          struct mwifiex_power_cfg *power_cfg)
674 {
675         int ret;
676         struct host_cmd_ds_txpwr_cfg *txp_cfg;
677         struct mwifiex_types_power_group *pg_tlv;
678         struct mwifiex_power_group *pg;
679         u8 *buf;
680         u16 dbm = 0;
681
682         if (!power_cfg->is_power_auto) {
683                 dbm = (u16) power_cfg->power_level;
684                 if ((dbm < priv->min_tx_power_level) ||
685                     (dbm > priv->max_tx_power_level)) {
686                         mwifiex_dbg(priv->adapter, ERROR,
687                                     "txpower value %d dBm\t"
688                                     "is out of range (%d dBm-%d dBm)\n",
689                                     dbm, priv->min_tx_power_level,
690                                     priv->max_tx_power_level);
691                         return -1;
692                 }
693         }
694         buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
695         if (!buf)
696                 return -ENOMEM;
697
698         txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
699         txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
700         if (!power_cfg->is_power_auto) {
701                 u16 dbm_min = power_cfg->is_power_fixed ?
702                               dbm : priv->min_tx_power_level;
703
704                 txp_cfg->mode = cpu_to_le32(1);
705                 pg_tlv = (struct mwifiex_types_power_group *)
706                          (buf + sizeof(struct host_cmd_ds_txpwr_cfg));
707                 pg_tlv->type = cpu_to_le16(TLV_TYPE_POWER_GROUP);
708                 pg_tlv->length =
709                         cpu_to_le16(4 * sizeof(struct mwifiex_power_group));
710                 pg = (struct mwifiex_power_group *)
711                      (buf + sizeof(struct host_cmd_ds_txpwr_cfg)
712                       + sizeof(struct mwifiex_types_power_group));
713                 /* Power group for modulation class HR/DSSS */
714                 pg->first_rate_code = 0x00;
715                 pg->last_rate_code = 0x03;
716                 pg->modulation_class = MOD_CLASS_HR_DSSS;
717                 pg->power_step = 0;
718                 pg->power_min = (s8) dbm_min;
719                 pg->power_max = (s8) dbm;
720                 pg++;
721                 /* Power group for modulation class OFDM */
722                 pg->first_rate_code = 0x00;
723                 pg->last_rate_code = 0x07;
724                 pg->modulation_class = MOD_CLASS_OFDM;
725                 pg->power_step = 0;
726                 pg->power_min = (s8) dbm_min;
727                 pg->power_max = (s8) dbm;
728                 pg++;
729                 /* Power group for modulation class HTBW20 */
730                 pg->first_rate_code = 0x00;
731                 pg->last_rate_code = 0x20;
732                 pg->modulation_class = MOD_CLASS_HT;
733                 pg->power_step = 0;
734                 pg->power_min = (s8) dbm_min;
735                 pg->power_max = (s8) dbm;
736                 pg->ht_bandwidth = HT_BW_20;
737                 pg++;
738                 /* Power group for modulation class HTBW40 */
739                 pg->first_rate_code = 0x00;
740                 pg->last_rate_code = 0x20;
741                 pg->modulation_class = MOD_CLASS_HT;
742                 pg->power_step = 0;
743                 pg->power_min = (s8) dbm_min;
744                 pg->power_max = (s8) dbm;
745                 pg->ht_bandwidth = HT_BW_40;
746         }
747         ret = mwifiex_send_cmd(priv, HostCmd_CMD_TXPWR_CFG,
748                                HostCmd_ACT_GEN_SET, 0, buf, true);
749
750         kfree(buf);
751         return ret;
752 }
753
754 /*
755  * IOCTL request handler to get power save mode.
756  *
757  * This function prepares the correct firmware command and
758  * issues it.
759  */
760 int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
761 {
762         int ret;
763         struct mwifiex_adapter *adapter = priv->adapter;
764         u16 sub_cmd;
765
766         if (*ps_mode)
767                 adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
768         else
769                 adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
770         sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
771         ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
772                                sub_cmd, BITMAP_STA_PS, NULL, true);
773         if ((!ret) && (sub_cmd == DIS_AUTO_PS))
774                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
775                                        GET_PS, 0, NULL, false);
776
777         return ret;
778 }
779
780 /*
781  * IOCTL request handler to set/reset WPA IE.
782  *
783  * The supplied WPA IE is treated as a opaque buffer. Only the first field
784  * is checked to determine WPA version. If buffer length is zero, the existing
785  * WPA IE is reset.
786  */
787 static int mwifiex_set_wpa_ie(struct mwifiex_private *priv,
788                               u8 *ie_data_ptr, u16 ie_len)
789 {
790         if (ie_len) {
791                 if (ie_len > sizeof(priv->wpa_ie)) {
792                         mwifiex_dbg(priv->adapter, ERROR,
793                                     "failed to copy WPA IE, too big\n");
794                         return -1;
795                 }
796                 memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
797                 priv->wpa_ie_len = ie_len;
798                 mwifiex_dbg(priv->adapter, CMD,
799                             "cmd: Set Wpa_ie_len=%d IE=%#x\n",
800                             priv->wpa_ie_len, priv->wpa_ie[0]);
801
802                 if (priv->wpa_ie[0] == WLAN_EID_VENDOR_SPECIFIC) {
803                         priv->sec_info.wpa_enabled = true;
804                 } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
805                         priv->sec_info.wpa2_enabled = true;
806                 } else {
807                         priv->sec_info.wpa_enabled = false;
808                         priv->sec_info.wpa2_enabled = false;
809                 }
810         } else {
811                 memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
812                 priv->wpa_ie_len = 0;
813                 mwifiex_dbg(priv->adapter, INFO,
814                             "info: reset wpa_ie_len=%d IE=%#x\n",
815                             priv->wpa_ie_len, priv->wpa_ie[0]);
816                 priv->sec_info.wpa_enabled = false;
817                 priv->sec_info.wpa2_enabled = false;
818         }
819
820         return 0;
821 }
822
823 /*
824  * IOCTL request handler to set/reset WAPI IE.
825  *
826  * The supplied WAPI IE is treated as a opaque buffer. Only the first field
827  * is checked to internally enable WAPI. If buffer length is zero, the existing
828  * WAPI IE is reset.
829  */
830 static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
831                                u8 *ie_data_ptr, u16 ie_len)
832 {
833         if (ie_len) {
834                 if (ie_len > sizeof(priv->wapi_ie)) {
835                         mwifiex_dbg(priv->adapter, ERROR,
836                                     "info: failed to copy WAPI IE, too big\n");
837                         return -1;
838                 }
839                 memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
840                 priv->wapi_ie_len = ie_len;
841                 mwifiex_dbg(priv->adapter, CMD,
842                             "cmd: Set wapi_ie_len=%d IE=%#x\n",
843                             priv->wapi_ie_len, priv->wapi_ie[0]);
844
845                 if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
846                         priv->sec_info.wapi_enabled = true;
847         } else {
848                 memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
849                 priv->wapi_ie_len = ie_len;
850                 mwifiex_dbg(priv->adapter, INFO,
851                             "info: Reset wapi_ie_len=%d IE=%#x\n",
852                             priv->wapi_ie_len, priv->wapi_ie[0]);
853                 priv->sec_info.wapi_enabled = false;
854         }
855         return 0;
856 }
857
858 /*
859  * IOCTL request handler to set/reset WPS IE.
860  *
861  * The supplied WPS IE is treated as a opaque buffer. Only the first field
862  * is checked to internally enable WPS. If buffer length is zero, the existing
863  * WPS IE is reset.
864  */
865 static int mwifiex_set_wps_ie(struct mwifiex_private *priv,
866                                u8 *ie_data_ptr, u16 ie_len)
867 {
868         if (ie_len) {
869                 if (ie_len > MWIFIEX_MAX_VSIE_LEN) {
870                         mwifiex_dbg(priv->adapter, ERROR,
871                                     "info: failed to copy WPS IE, too big\n");
872                         return -1;
873                 }
874
875                 priv->wps_ie = kzalloc(MWIFIEX_MAX_VSIE_LEN, GFP_KERNEL);
876                 if (!priv->wps_ie)
877                         return -ENOMEM;
878
879                 memcpy(priv->wps_ie, ie_data_ptr, ie_len);
880                 priv->wps_ie_len = ie_len;
881                 mwifiex_dbg(priv->adapter, CMD,
882                             "cmd: Set wps_ie_len=%d IE=%#x\n",
883                             priv->wps_ie_len, priv->wps_ie[0]);
884         } else {
885                 kfree(priv->wps_ie);
886                 priv->wps_ie_len = ie_len;
887                 mwifiex_dbg(priv->adapter, INFO,
888                             "info: Reset wps_ie_len=%d\n", priv->wps_ie_len);
889         }
890         return 0;
891 }
892
893 /*
894  * IOCTL request handler to set WAPI key.
895  *
896  * This function prepares the correct firmware command and
897  * issues it.
898  */
899 static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
900                                struct mwifiex_ds_encrypt_key *encrypt_key)
901 {
902
903         return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
904                                 HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
905                                 encrypt_key, true);
906 }
907
908 /*
909  * IOCTL request handler to set WEP network key.
910  *
911  * This function prepares the correct firmware command and
912  * issues it, after validation checks.
913  */
914 static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
915                               struct mwifiex_ds_encrypt_key *encrypt_key)
916 {
917         struct mwifiex_adapter *adapter = priv->adapter;
918         int ret;
919         struct mwifiex_wep_key *wep_key;
920         int index;
921
922         if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
923                 priv->wep_key_curr_index = 0;
924         wep_key = &priv->wep_key[priv->wep_key_curr_index];
925         index = encrypt_key->key_index;
926         if (encrypt_key->key_disable) {
927                 priv->sec_info.wep_enabled = 0;
928         } else if (!encrypt_key->key_len) {
929                 /* Copy the required key as the current key */
930                 wep_key = &priv->wep_key[index];
931                 if (!wep_key->key_length) {
932                         mwifiex_dbg(adapter, ERROR,
933                                     "key not set, so cannot enable it\n");
934                         return -1;
935                 }
936
937                 if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2) {
938                         memcpy(encrypt_key->key_material,
939                                wep_key->key_material, wep_key->key_length);
940                         encrypt_key->key_len = wep_key->key_length;
941                 }
942
943                 priv->wep_key_curr_index = (u16) index;
944                 priv->sec_info.wep_enabled = 1;
945         } else {
946                 wep_key = &priv->wep_key[index];
947                 memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
948                 /* Copy the key in the driver */
949                 memcpy(wep_key->key_material,
950                        encrypt_key->key_material,
951                        encrypt_key->key_len);
952                 wep_key->key_index = index;
953                 wep_key->key_length = encrypt_key->key_len;
954                 priv->sec_info.wep_enabled = 1;
955         }
956         if (wep_key->key_length) {
957                 void *enc_key;
958
959                 if (encrypt_key->key_disable) {
960                         memset(&priv->wep_key[index], 0,
961                                sizeof(struct mwifiex_wep_key));
962                         goto done;
963                 }
964
965                 if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2)
966                         enc_key = encrypt_key;
967                 else
968                         enc_key = NULL;
969
970                 /* Send request to firmware */
971                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
972                                        HostCmd_ACT_GEN_SET, 0, enc_key, false);
973                 if (ret)
974                         return ret;
975         }
976
977 done:
978         if (priv->sec_info.wep_enabled)
979                 priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
980         else
981                 priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
982
983         ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
984                                HostCmd_ACT_GEN_SET, 0,
985                                &priv->curr_pkt_filter, true);
986
987         return ret;
988 }
989
990 /*
991  * IOCTL request handler to set WPA key.
992  *
993  * This function prepares the correct firmware command and
994  * issues it, after validation checks.
995  *
996  * Current driver only supports key length of up to 32 bytes.
997  *
998  * This function can also be used to disable a currently set key.
999  */
1000 static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
1001                               struct mwifiex_ds_encrypt_key *encrypt_key)
1002 {
1003         int ret;
1004         u8 remove_key = false;
1005         struct host_cmd_ds_802_11_key_material *ibss_key;
1006
1007         /* Current driver only supports key length of up to 32 bytes */
1008         if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
1009                 mwifiex_dbg(priv->adapter, ERROR,
1010                             "key length too long\n");
1011                 return -1;
1012         }
1013
1014         if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
1015                 /*
1016                  * IBSS/WPA-None uses only one key (Group) for both receiving
1017                  * and sending unicast and multicast packets.
1018                  */
1019                 /* Send the key as PTK to firmware */
1020                 encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
1021                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1022                                        HostCmd_ACT_GEN_SET,
1023                                        KEY_INFO_ENABLED, encrypt_key, false);
1024                 if (ret)
1025                         return ret;
1026
1027                 ibss_key = &priv->aes_key;
1028                 memset(ibss_key, 0,
1029                        sizeof(struct host_cmd_ds_802_11_key_material));
1030                 /* Copy the key in the driver */
1031                 memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
1032                        encrypt_key->key_len);
1033                 memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
1034                        sizeof(ibss_key->key_param_set.key_len));
1035                 ibss_key->key_param_set.key_type_id
1036                         = cpu_to_le16(KEY_TYPE_ID_TKIP);
1037                 ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);
1038
1039                 /* Send the key as GTK to firmware */
1040                 encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
1041         }
1042
1043         if (!encrypt_key->key_index)
1044                 encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
1045
1046         if (remove_key)
1047                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1048                                        HostCmd_ACT_GEN_SET,
1049                                        !KEY_INFO_ENABLED, encrypt_key, true);
1050         else
1051                 ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
1052                                        HostCmd_ACT_GEN_SET,
1053                                        KEY_INFO_ENABLED, encrypt_key, true);
1054
1055         return ret;
1056 }
1057
1058 /*
1059  * IOCTL request handler to set/get network keys.
1060  *
1061  * This is a generic key handling function which supports WEP, WPA
1062  * and WAPI.
1063  */
1064 static int
1065 mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
1066                               struct mwifiex_ds_encrypt_key *encrypt_key)
1067 {
1068         int status;
1069
1070         if (encrypt_key->is_wapi_key)
1071                 status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
1072         else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
1073                 status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
1074         else
1075                 status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
1076         return status;
1077 }
1078
1079 /*
1080  * This function returns the driver version.
1081  */
1082 int
1083 mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
1084                                int max_len)
1085 {
1086         union {
1087                 __le32 l;
1088                 u8 c[4];
1089         } ver;
1090         char fw_ver[32];
1091
1092         ver.l = cpu_to_le32(adapter->fw_release_number);
1093         sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);
1094
1095         snprintf(version, max_len, driver_version, fw_ver);
1096
1097         mwifiex_dbg(adapter, MSG, "info: MWIFIEX VERSION: %s\n", version);
1098
1099         return 0;
1100 }
1101
1102 /*
1103  * Sends IOCTL request to set encoding parameters.
1104  *
1105  * This function allocates the IOCTL request buffer, fills it
1106  * with requisite parameters and calls the IOCTL handler.
1107  */
1108 int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
1109                        const u8 *key, int key_len, u8 key_index,
1110                        const u8 *mac_addr, int disable)
1111 {
1112         struct mwifiex_ds_encrypt_key encrypt_key;
1113
1114         memset(&encrypt_key, 0, sizeof(encrypt_key));
1115         encrypt_key.key_len = key_len;
1116         encrypt_key.key_index = key_index;
1117
1118         if (kp && kp->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
1119                 encrypt_key.is_igtk_key = true;
1120
1121         if (!disable) {
1122                 if (key_len)
1123                         memcpy(encrypt_key.key_material, key, key_len);
1124                 else
1125                         encrypt_key.is_current_wep_key = true;
1126
1127                 if (mac_addr)
1128                         memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1129                 if (kp && kp->seq && kp->seq_len) {
1130                         memcpy(encrypt_key.pn, kp->seq, kp->seq_len);
1131                         encrypt_key.pn_len = kp->seq_len;
1132                         encrypt_key.is_rx_seq_valid = true;
1133                 }
1134         } else {
1135                 encrypt_key.key_disable = true;
1136                 if (mac_addr)
1137                         memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1138         }
1139
1140         return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
1141 }
1142
1143 /*
1144  * Sends IOCTL request to get extended version.
1145  *
1146  * This function allocates the IOCTL request buffer, fills it
1147  * with requisite parameters and calls the IOCTL handler.
1148  */
1149 int
1150 mwifiex_get_ver_ext(struct mwifiex_private *priv, u32 version_str_sel)
1151 {
1152         struct mwifiex_ver_ext ver_ext;
1153
1154         memset(&ver_ext, 0, sizeof(ver_ext));
1155         ver_ext.version_str_sel = version_str_sel;
1156         if (mwifiex_send_cmd(priv, HostCmd_CMD_VERSION_EXT,
1157                              HostCmd_ACT_GEN_GET, 0, &ver_ext, true))
1158                 return -1;
1159
1160         return 0;
1161 }
1162
1163 int
1164 mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
1165                            struct ieee80211_channel *chan,
1166                            unsigned int duration)
1167 {
1168         struct host_cmd_ds_remain_on_chan roc_cfg;
1169         u8 sc;
1170
1171         memset(&roc_cfg, 0, sizeof(roc_cfg));
1172         roc_cfg.action = cpu_to_le16(action);
1173         if (action == HostCmd_ACT_GEN_SET) {
1174                 roc_cfg.band_cfg = chan->band;
1175                 sc = mwifiex_chan_type_to_sec_chan_offset(NL80211_CHAN_NO_HT);
1176                 roc_cfg.band_cfg |= (sc << 2);
1177
1178                 roc_cfg.channel =
1179                         ieee80211_frequency_to_channel(chan->center_freq);
1180                 roc_cfg.duration = cpu_to_le32(duration);
1181         }
1182         if (mwifiex_send_cmd(priv, HostCmd_CMD_REMAIN_ON_CHAN,
1183                              action, 0, &roc_cfg, true)) {
1184                 mwifiex_dbg(priv->adapter, ERROR,
1185                             "failed to remain on channel\n");
1186                 return -1;
1187         }
1188
1189         return roc_cfg.status;
1190 }
1191
1192 /*
1193  * Sends IOCTL request to get statistics information.
1194  *
1195  * This function allocates the IOCTL request buffer, fills it
1196  * with requisite parameters and calls the IOCTL handler.
1197  */
1198 int
1199 mwifiex_get_stats_info(struct mwifiex_private *priv,
1200                        struct mwifiex_ds_get_stats *log)
1201 {
1202         return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_GET_LOG,
1203                                 HostCmd_ACT_GEN_GET, 0, log, true);
1204 }
1205
1206 /*
1207  * IOCTL request handler to read/write register.
1208  *
1209  * This function prepares the correct firmware command and
1210  * issues it.
1211  *
1212  * Access to the following registers are supported -
1213  *      - MAC
1214  *      - BBP
1215  *      - RF
1216  *      - PMIC
1217  *      - CAU
1218  */
1219 static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
1220                                         struct mwifiex_ds_reg_rw *reg_rw,
1221                                         u16 action)
1222 {
1223         u16 cmd_no;
1224
1225         switch (reg_rw->type) {
1226         case MWIFIEX_REG_MAC:
1227                 cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
1228                 break;
1229         case MWIFIEX_REG_BBP:
1230                 cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
1231                 break;
1232         case MWIFIEX_REG_RF:
1233                 cmd_no = HostCmd_CMD_RF_REG_ACCESS;
1234                 break;
1235         case MWIFIEX_REG_PMIC:
1236                 cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
1237                 break;
1238         case MWIFIEX_REG_CAU:
1239                 cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
1240                 break;
1241         default:
1242                 return -1;
1243         }
1244
1245         return mwifiex_send_cmd(priv, cmd_no, action, 0, reg_rw, true);
1246 }
1247
1248 /*
1249  * Sends IOCTL request to write to a register.
1250  *
1251  * This function allocates the IOCTL request buffer, fills it
1252  * with requisite parameters and calls the IOCTL handler.
1253  */
1254 int
1255 mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
1256                   u32 reg_offset, u32 reg_value)
1257 {
1258         struct mwifiex_ds_reg_rw reg_rw;
1259
1260         reg_rw.type = reg_type;
1261         reg_rw.offset = reg_offset;
1262         reg_rw.value = reg_value;
1263
1264         return mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_SET);
1265 }
1266
1267 /*
1268  * Sends IOCTL request to read from a register.
1269  *
1270  * This function allocates the IOCTL request buffer, fills it
1271  * with requisite parameters and calls the IOCTL handler.
1272  */
1273 int
1274 mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
1275                  u32 reg_offset, u32 *value)
1276 {
1277         int ret;
1278         struct mwifiex_ds_reg_rw reg_rw;
1279
1280         reg_rw.type = reg_type;
1281         reg_rw.offset = reg_offset;
1282         ret = mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_GET);
1283
1284         if (ret)
1285                 goto done;
1286
1287         *value = reg_rw.value;
1288
1289 done:
1290         return ret;
1291 }
1292
1293 /*
1294  * Sends IOCTL request to read from EEPROM.
1295  *
1296  * This function allocates the IOCTL request buffer, fills it
1297  * with requisite parameters and calls the IOCTL handler.
1298  */
1299 int
1300 mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
1301                     u8 *value)
1302 {
1303         int ret;
1304         struct mwifiex_ds_read_eeprom rd_eeprom;
1305
1306         rd_eeprom.offset =  offset;
1307         rd_eeprom.byte_count = bytes;
1308
1309         /* Send request to firmware */
1310         ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
1311                                HostCmd_ACT_GEN_GET, 0, &rd_eeprom, true);
1312
1313         if (!ret)
1314                 memcpy(value, rd_eeprom.value, min((u16)MAX_EEPROM_DATA,
1315                        rd_eeprom.byte_count));
1316         return ret;
1317 }
1318
1319 /*
1320  * This function sets a generic IE. In addition to generic IE, it can
1321  * also handle WPA, WPA2 and WAPI IEs.
1322  */
1323 static int
1324 mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
1325                           u16 ie_len)
1326 {
1327         struct ieee_types_vendor_header *pvendor_ie;
1328         const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
1329         const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
1330         u16 unparsed_len = ie_len, cur_ie_len;
1331
1332         /* If the passed length is zero, reset the buffer */
1333         if (!ie_len) {
1334                 priv->gen_ie_buf_len = 0;
1335                 priv->wps.session_enable = false;
1336                 return 0;
1337         } else if (!ie_data_ptr ||
1338                    ie_len <= sizeof(struct ieee_types_header)) {
1339                 return -1;
1340         }
1341         pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
1342
1343         while (pvendor_ie) {
1344                 cur_ie_len = pvendor_ie->len + sizeof(struct ieee_types_header);
1345
1346                 if (pvendor_ie->element_id == WLAN_EID_RSN) {
1347                         /* IE is a WPA/WPA2 IE so call set_wpa function */
1348                         mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie, cur_ie_len);
1349                         priv->wps.session_enable = false;
1350                         goto next_ie;
1351                 }
1352
1353                 if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
1354                         /* IE is a WAPI IE so call set_wapi function */
1355                         mwifiex_set_wapi_ie(priv, (u8 *)pvendor_ie,
1356                                             cur_ie_len);
1357                         goto next_ie;
1358                 }
1359
1360                 if (pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) {
1361                         /* Test to see if it is a WPA IE, if not, then
1362                          * it is a gen IE
1363                          */
1364                         if (!memcmp(&pvendor_ie->oui, wpa_oui,
1365                                     sizeof(wpa_oui))) {
1366                                 /* IE is a WPA/WPA2 IE so call set_wpa function
1367                                  */
1368                                 mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie,
1369                                                    cur_ie_len);
1370                                 priv->wps.session_enable = false;
1371                                 goto next_ie;
1372                         }
1373
1374                         if (!memcmp(&pvendor_ie->oui, wps_oui,
1375                                     sizeof(wps_oui))) {
1376                                 /* Test to see if it is a WPS IE,
1377                                  * if so, enable wps session flag
1378                                  */
1379                                 priv->wps.session_enable = true;
1380                                 mwifiex_dbg(priv->adapter, MSG,
1381                                             "WPS Session Enabled.\n");
1382                                 mwifiex_set_wps_ie(priv, (u8 *)pvendor_ie,
1383                                                    cur_ie_len);
1384                                 goto next_ie;
1385                         }
1386                 }
1387
1388                 /* Saved in gen_ie, such as P2P IE.etc.*/
1389
1390                 /* Verify that the passed length is not larger than the
1391                  * available space remaining in the buffer
1392                  */
1393                 if (cur_ie_len <
1394                     (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
1395                         /* Append the passed data to the end
1396                          * of the genIeBuffer
1397                          */
1398                         memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len,
1399                                (u8 *)pvendor_ie, cur_ie_len);
1400                         /* Increment the stored buffer length by the
1401                          * size passed
1402                          */
1403                         priv->gen_ie_buf_len += cur_ie_len;
1404                 }
1405
1406 next_ie:
1407                 unparsed_len -= cur_ie_len;
1408
1409                 if (unparsed_len <= sizeof(struct ieee_types_header))
1410                         pvendor_ie = NULL;
1411                 else
1412                         pvendor_ie = (struct ieee_types_vendor_header *)
1413                                 (((u8 *)pvendor_ie) + cur_ie_len);
1414         }
1415
1416         return 0;
1417 }
1418
1419 /*
1420  * IOCTL request handler to set/get generic IE.
1421  *
1422  * In addition to various generic IEs, this function can also be
1423  * used to set the ARP filter.
1424  */
1425 static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
1426                                      struct mwifiex_ds_misc_gen_ie *gen_ie,
1427                                      u16 action)
1428 {
1429         struct mwifiex_adapter *adapter = priv->adapter;
1430
1431         switch (gen_ie->type) {
1432         case MWIFIEX_IE_TYPE_GEN_IE:
1433                 if (action == HostCmd_ACT_GEN_GET) {
1434                         gen_ie->len = priv->wpa_ie_len;
1435                         memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
1436                 } else {
1437                         mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
1438                                                   (u16) gen_ie->len);
1439                 }
1440                 break;
1441         case MWIFIEX_IE_TYPE_ARP_FILTER:
1442                 memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
1443                 if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
1444                         adapter->arp_filter_size = 0;
1445                         mwifiex_dbg(adapter, ERROR,
1446                                     "invalid ARP filter size\n");
1447                         return -1;
1448                 } else {
1449                         memcpy(adapter->arp_filter, gen_ie->ie_data,
1450                                gen_ie->len);
1451                         adapter->arp_filter_size = gen_ie->len;
1452                 }
1453                 break;
1454         default:
1455                 mwifiex_dbg(adapter, ERROR, "invalid IE type\n");
1456                 return -1;
1457         }
1458         return 0;
1459 }
1460
1461 /*
1462  * Sends IOCTL request to set a generic IE.
1463  *
1464  * This function allocates the IOCTL request buffer, fills it
1465  * with requisite parameters and calls the IOCTL handler.
1466  */
1467 int
1468 mwifiex_set_gen_ie(struct mwifiex_private *priv, const u8 *ie, int ie_len)
1469 {
1470         struct mwifiex_ds_misc_gen_ie gen_ie;
1471
1472         if (ie_len > IEEE_MAX_IE_SIZE)
1473                 return -EFAULT;
1474
1475         gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
1476         gen_ie.len = ie_len;
1477         memcpy(gen_ie.ie_data, ie, ie_len);
1478         if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
1479                 return -EFAULT;
1480
1481         return 0;
1482 }
1483
1484 /* This function get Host Sleep wake up reason.
1485  *
1486  */
1487 int mwifiex_get_wakeup_reason(struct mwifiex_private *priv, u16 action,
1488                               int cmd_type,
1489                               struct mwifiex_ds_wakeup_reason *wakeup_reason)
1490 {
1491         int status = 0;
1492
1493         status = mwifiex_send_cmd(priv, HostCmd_CMD_HS_WAKEUP_REASON,
1494                                   HostCmd_ACT_GEN_GET, 0, wakeup_reason,
1495                                   cmd_type == MWIFIEX_SYNC_CMD);
1496
1497         return status;
1498 }
1499
1500 int mwifiex_get_chan_info(struct mwifiex_private *priv,
1501                           struct mwifiex_channel_band *channel_band)
1502 {
1503         int status = 0;
1504
1505         status = mwifiex_send_cmd(priv, HostCmd_CMD_STA_CONFIGURE,
1506                                   HostCmd_ACT_GEN_GET, 0, channel_band,
1507                                   MWIFIEX_SYNC_CMD);
1508
1509         return status;
1510 }