GNU Linux-libre 4.9.309-gnu1
[releases.git] / drivers / pci / host / pci-mvebu.c
1 /*
2  * PCIe driver for Marvell Armada 370 and Armada XP SoCs
3  *
4  * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
5  *
6  * This file is licensed under the terms of the GNU General Public
7  * License version 2.  This program is licensed "as is" without any
8  * warranty of any kind, whether express or implied.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/pci.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/init.h>
17 #include <linux/mbus.h>
18 #include <linux/msi.h>
19 #include <linux/slab.h>
20 #include <linux/platform_device.h>
21 #include <linux/of_address.h>
22 #include <linux/of_irq.h>
23 #include <linux/of_gpio.h>
24 #include <linux/of_pci.h>
25 #include <linux/of_platform.h>
26
27 /*
28  * PCIe unit register offsets.
29  */
30 #define PCIE_DEV_ID_OFF         0x0000
31 #define PCIE_CMD_OFF            0x0004
32 #define PCIE_DEV_REV_OFF        0x0008
33 #define PCIE_BAR_LO_OFF(n)      (0x0010 + ((n) << 3))
34 #define PCIE_BAR_HI_OFF(n)      (0x0014 + ((n) << 3))
35 #define PCIE_CAP_PCIEXP         0x0060
36 #define PCIE_HEADER_LOG_4_OFF   0x0128
37 #define PCIE_BAR_CTRL_OFF(n)    (0x1804 + (((n) - 1) * 4))
38 #define PCIE_WIN04_CTRL_OFF(n)  (0x1820 + ((n) << 4))
39 #define PCIE_WIN04_BASE_OFF(n)  (0x1824 + ((n) << 4))
40 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
41 #define PCIE_WIN5_CTRL_OFF      0x1880
42 #define PCIE_WIN5_BASE_OFF      0x1884
43 #define PCIE_WIN5_REMAP_OFF     0x188c
44 #define PCIE_CONF_ADDR_OFF      0x18f8
45 #define  PCIE_CONF_ADDR_EN              0x80000000
46 #define  PCIE_CONF_REG(r)               ((((r) & 0xf00) << 16) | ((r) & 0xfc))
47 #define  PCIE_CONF_BUS(b)               (((b) & 0xff) << 16)
48 #define  PCIE_CONF_DEV(d)               (((d) & 0x1f) << 11)
49 #define  PCIE_CONF_FUNC(f)              (((f) & 0x7) << 8)
50 #define  PCIE_CONF_ADDR(bus, devfn, where) \
51         (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn))    | \
52          PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
53          PCIE_CONF_ADDR_EN)
54 #define PCIE_CONF_DATA_OFF      0x18fc
55 #define PCIE_MASK_OFF           0x1910
56 #define  PCIE_MASK_ENABLE_INTS          0x0f000000
57 #define PCIE_CTRL_OFF           0x1a00
58 #define  PCIE_CTRL_X1_MODE              0x0001
59 #define PCIE_STAT_OFF           0x1a04
60 #define  PCIE_STAT_BUS                  0xff00
61 #define  PCIE_STAT_DEV                  0x1f0000
62 #define  PCIE_STAT_LINK_DOWN            BIT(0)
63 #define PCIE_RC_RTSTA           0x1a14
64 #define PCIE_DEBUG_CTRL         0x1a60
65 #define  PCIE_DEBUG_SOFT_RESET          BIT(20)
66
67 enum {
68         PCISWCAP = PCI_BRIDGE_CONTROL + 2,
69         PCISWCAP_EXP_LIST_ID    = PCISWCAP + PCI_CAP_LIST_ID,
70         PCISWCAP_EXP_DEVCAP     = PCISWCAP + PCI_EXP_DEVCAP,
71         PCISWCAP_EXP_DEVCTL     = PCISWCAP + PCI_EXP_DEVCTL,
72         PCISWCAP_EXP_LNKCAP     = PCISWCAP + PCI_EXP_LNKCAP,
73         PCISWCAP_EXP_LNKCTL     = PCISWCAP + PCI_EXP_LNKCTL,
74         PCISWCAP_EXP_SLTCAP     = PCISWCAP + PCI_EXP_SLTCAP,
75         PCISWCAP_EXP_SLTCTL     = PCISWCAP + PCI_EXP_SLTCTL,
76         PCISWCAP_EXP_RTCTL      = PCISWCAP + PCI_EXP_RTCTL,
77         PCISWCAP_EXP_RTSTA      = PCISWCAP + PCI_EXP_RTSTA,
78         PCISWCAP_EXP_DEVCAP2    = PCISWCAP + PCI_EXP_DEVCAP2,
79         PCISWCAP_EXP_DEVCTL2    = PCISWCAP + PCI_EXP_DEVCTL2,
80         PCISWCAP_EXP_LNKCAP2    = PCISWCAP + PCI_EXP_LNKCAP2,
81         PCISWCAP_EXP_LNKCTL2    = PCISWCAP + PCI_EXP_LNKCTL2,
82         PCISWCAP_EXP_SLTCAP2    = PCISWCAP + PCI_EXP_SLTCAP2,
83         PCISWCAP_EXP_SLTCTL2    = PCISWCAP + PCI_EXP_SLTCTL2,
84 };
85
86 /* PCI configuration space of a PCI-to-PCI bridge */
87 struct mvebu_sw_pci_bridge {
88         u16 vendor;
89         u16 device;
90         u16 command;
91         u16 status;
92         u16 class;
93         u8 interface;
94         u8 revision;
95         u8 bist;
96         u8 header_type;
97         u8 latency_timer;
98         u8 cache_line_size;
99         u32 bar[2];
100         u8 primary_bus;
101         u8 secondary_bus;
102         u8 subordinate_bus;
103         u8 secondary_latency_timer;
104         u8 iobase;
105         u8 iolimit;
106         u16 secondary_status;
107         u16 membase;
108         u16 memlimit;
109         u16 iobaseupper;
110         u16 iolimitupper;
111         u32 romaddr;
112         u8 intline;
113         u8 intpin;
114         u16 bridgectrl;
115
116         /* PCI express capability */
117         u32 pcie_sltcap;
118         u16 pcie_devctl;
119         u16 pcie_rtctl;
120 };
121
122 struct mvebu_pcie_port;
123
124 /* Structure representing all PCIe interfaces */
125 struct mvebu_pcie {
126         struct platform_device *pdev;
127         struct mvebu_pcie_port *ports;
128         struct msi_controller *msi;
129         struct resource io;
130         struct resource realio;
131         struct resource mem;
132         struct resource busn;
133         int nports;
134 };
135
136 struct mvebu_pcie_window {
137         phys_addr_t base;
138         phys_addr_t remap;
139         size_t size;
140 };
141
142 /* Structure representing one PCIe interface */
143 struct mvebu_pcie_port {
144         char *name;
145         void __iomem *base;
146         u32 port;
147         u32 lane;
148         int devfn;
149         unsigned int mem_target;
150         unsigned int mem_attr;
151         unsigned int io_target;
152         unsigned int io_attr;
153         struct clk *clk;
154         struct gpio_desc *reset_gpio;
155         char *reset_name;
156         struct mvebu_sw_pci_bridge bridge;
157         struct device_node *dn;
158         struct mvebu_pcie *pcie;
159         struct mvebu_pcie_window memwin;
160         struct mvebu_pcie_window iowin;
161         u32 saved_pcie_stat;
162 };
163
164 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
165 {
166         writel(val, port->base + reg);
167 }
168
169 static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
170 {
171         return readl(port->base + reg);
172 }
173
174 static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
175 {
176         return port->io_target != -1 && port->io_attr != -1;
177 }
178
179 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
180 {
181         return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
182 }
183
184 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
185 {
186         u32 stat;
187
188         stat = mvebu_readl(port, PCIE_STAT_OFF);
189         stat &= ~PCIE_STAT_BUS;
190         stat |= nr << 8;
191         mvebu_writel(port, stat, PCIE_STAT_OFF);
192 }
193
194 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
195 {
196         u32 stat;
197
198         stat = mvebu_readl(port, PCIE_STAT_OFF);
199         stat &= ~PCIE_STAT_DEV;
200         stat |= nr << 16;
201         mvebu_writel(port, stat, PCIE_STAT_OFF);
202 }
203
204 /*
205  * Setup PCIE BARs and Address Decode Wins:
206  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
207  * WIN[0-3] -> DRAM bank[0-3]
208  */
209 static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
210 {
211         const struct mbus_dram_target_info *dram;
212         u32 size;
213         int i;
214
215         dram = mv_mbus_dram_info();
216
217         /* First, disable and clear BARs and windows. */
218         for (i = 1; i < 3; i++) {
219                 mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
220                 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
221                 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
222         }
223
224         for (i = 0; i < 5; i++) {
225                 mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
226                 mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
227                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
228         }
229
230         mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
231         mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
232         mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
233
234         /* Setup windows for DDR banks.  Count total DDR size on the fly. */
235         size = 0;
236         for (i = 0; i < dram->num_cs; i++) {
237                 const struct mbus_dram_window *cs = dram->cs + i;
238
239                 mvebu_writel(port, cs->base & 0xffff0000,
240                              PCIE_WIN04_BASE_OFF(i));
241                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
242                 mvebu_writel(port,
243                              ((cs->size - 1) & 0xffff0000) |
244                              (cs->mbus_attr << 8) |
245                              (dram->mbus_dram_target_id << 4) | 1,
246                              PCIE_WIN04_CTRL_OFF(i));
247
248                 size += cs->size;
249         }
250
251         /* Round up 'size' to the nearest power of two. */
252         if ((size & (size - 1)) != 0)
253                 size = 1 << fls(size);
254
255         /* Setup BAR[1] to all DRAM banks. */
256         mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
257         mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
258         mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
259                      PCIE_BAR_CTRL_OFF(1));
260 }
261
262 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
263 {
264         u32 cmd, mask;
265
266         /* Point PCIe unit MBUS decode windows to DRAM space. */
267         mvebu_pcie_setup_wins(port);
268
269         /* Master + slave enable. */
270         cmd = mvebu_readl(port, PCIE_CMD_OFF);
271         cmd |= PCI_COMMAND_IO;
272         cmd |= PCI_COMMAND_MEMORY;
273         cmd |= PCI_COMMAND_MASTER;
274         mvebu_writel(port, cmd, PCIE_CMD_OFF);
275
276         /* Enable interrupt lines A-D. */
277         mask = mvebu_readl(port, PCIE_MASK_OFF);
278         mask |= PCIE_MASK_ENABLE_INTS;
279         mvebu_writel(port, mask, PCIE_MASK_OFF);
280 }
281
282 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
283                                  struct pci_bus *bus,
284                                  u32 devfn, int where, int size, u32 *val)
285 {
286         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
287
288         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
289                      PCIE_CONF_ADDR_OFF);
290
291         switch (size) {
292         case 1:
293                 *val = readb_relaxed(conf_data + (where & 3));
294                 break;
295         case 2:
296                 *val = readw_relaxed(conf_data + (where & 2));
297                 break;
298         case 4:
299                 *val = readl_relaxed(conf_data);
300                 break;
301         }
302
303         return PCIBIOS_SUCCESSFUL;
304 }
305
306 static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
307                                  struct pci_bus *bus,
308                                  u32 devfn, int where, int size, u32 val)
309 {
310         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
311
312         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
313                      PCIE_CONF_ADDR_OFF);
314
315         switch (size) {
316         case 1:
317                 writeb(val, conf_data + (where & 3));
318                 break;
319         case 2:
320                 writew(val, conf_data + (where & 2));
321                 break;
322         case 4:
323                 writel(val, conf_data);
324                 break;
325         default:
326                 return PCIBIOS_BAD_REGISTER_NUMBER;
327         }
328
329         return PCIBIOS_SUCCESSFUL;
330 }
331
332 /*
333  * Remove windows, starting from the largest ones to the smallest
334  * ones.
335  */
336 static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
337                                    phys_addr_t base, size_t size)
338 {
339         while (size) {
340                 size_t sz = 1 << (fls(size) - 1);
341
342                 mvebu_mbus_del_window(base, sz);
343                 base += sz;
344                 size -= sz;
345         }
346 }
347
348 /*
349  * MBus windows can only have a power of two size, but PCI BARs do not
350  * have this constraint. Therefore, we have to split the PCI BAR into
351  * areas each having a power of two size. We start from the largest
352  * one (i.e highest order bit set in the size).
353  */
354 static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
355                                    unsigned int target, unsigned int attribute,
356                                    phys_addr_t base, size_t size,
357                                    phys_addr_t remap)
358 {
359         size_t size_mapped = 0;
360
361         while (size) {
362                 size_t sz = 1 << (fls(size) - 1);
363                 int ret;
364
365                 ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
366                                                         sz, remap);
367                 if (ret) {
368                         phys_addr_t end = base + sz - 1;
369
370                         dev_err(&port->pcie->pdev->dev,
371                                 "Could not create MBus window at [mem %pa-%pa]: %d\n",
372                                 &base, &end, ret);
373                         mvebu_pcie_del_windows(port, base - size_mapped,
374                                                size_mapped);
375                         return;
376                 }
377
378                 size -= sz;
379                 size_mapped += sz;
380                 base += sz;
381                 if (remap != MVEBU_MBUS_NO_REMAP)
382                         remap += sz;
383         }
384 }
385
386 static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
387                                   unsigned int target, unsigned int attribute,
388                                   const struct mvebu_pcie_window *desired,
389                                   struct mvebu_pcie_window *cur)
390 {
391         if (desired->base == cur->base && desired->remap == cur->remap &&
392             desired->size == cur->size)
393                 return;
394
395         if (cur->size != 0) {
396                 mvebu_pcie_del_windows(port, cur->base, cur->size);
397                 cur->size = 0;
398                 cur->base = 0;
399
400                 /*
401                  * If something tries to change the window while it is enabled
402                  * the change will not be done atomically. That would be
403                  * difficult to do in the general case.
404                  */
405         }
406
407         if (desired->size == 0)
408                 return;
409
410         mvebu_pcie_add_windows(port, target, attribute, desired->base,
411                                desired->size, desired->remap);
412         *cur = *desired;
413 }
414
415 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
416 {
417         struct mvebu_pcie_window desired = {};
418
419         /* Are the new iobase/iolimit values invalid? */
420         if (port->bridge.iolimit < port->bridge.iobase ||
421             port->bridge.iolimitupper < port->bridge.iobaseupper ||
422             !(port->bridge.command & PCI_COMMAND_IO)) {
423                 mvebu_pcie_set_window(port, port->io_target, port->io_attr,
424                                       &desired, &port->iowin);
425                 return;
426         }
427
428         if (!mvebu_has_ioport(port)) {
429                 dev_WARN(&port->pcie->pdev->dev,
430                          "Attempt to set IO when IO is disabled\n");
431                 return;
432         }
433
434         /*
435          * We read the PCI-to-PCI bridge emulated registers, and
436          * calculate the base address and size of the address decoding
437          * window to setup, according to the PCI-to-PCI bridge
438          * specifications. iobase is the bus address, port->iowin_base
439          * is the CPU address.
440          */
441         desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
442                         (port->bridge.iobaseupper << 16);
443         desired.base = port->pcie->io.start + desired.remap;
444         desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
445                          (port->bridge.iolimitupper << 16)) -
446                         desired.remap) +
447                        1;
448
449         mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
450                               &port->iowin);
451 }
452
453 static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
454 {
455         struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
456
457         /* Are the new membase/memlimit values invalid? */
458         if (port->bridge.memlimit < port->bridge.membase ||
459             !(port->bridge.command & PCI_COMMAND_MEMORY)) {
460                 mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
461                                       &desired, &port->memwin);
462                 return;
463         }
464
465         /*
466          * We read the PCI-to-PCI bridge emulated registers, and
467          * calculate the base address and size of the address decoding
468          * window to setup, according to the PCI-to-PCI bridge
469          * specifications.
470          */
471         desired.base = ((port->bridge.membase & 0xFFF0) << 16);
472         desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
473                        desired.base + 1;
474
475         mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
476                               &port->memwin);
477 }
478
479 /*
480  * Initialize the configuration space of the PCI-to-PCI bridge
481  * associated with the given PCIe interface.
482  */
483 static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
484 {
485         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
486
487         memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
488
489         bridge->class = PCI_CLASS_BRIDGE_PCI;
490         bridge->vendor = PCI_VENDOR_ID_MARVELL;
491         bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
492         bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
493         bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
494         bridge->cache_line_size = 0x10;
495
496         /* We support 32 bits I/O addressing */
497         bridge->iobase = PCI_IO_RANGE_TYPE_32;
498         bridge->iolimit = PCI_IO_RANGE_TYPE_32;
499
500         /* Add capabilities */
501         bridge->status = PCI_STATUS_CAP_LIST;
502 }
503
504 /*
505  * Read the configuration space of the PCI-to-PCI bridge associated to
506  * the given PCIe interface.
507  */
508 static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
509                                   unsigned int where, int size, u32 *value)
510 {
511         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
512
513         switch (where & ~3) {
514         case PCI_VENDOR_ID:
515                 *value = bridge->device << 16 | bridge->vendor;
516                 break;
517
518         case PCI_COMMAND:
519                 *value = bridge->command | bridge->status << 16;
520                 break;
521
522         case PCI_CLASS_REVISION:
523                 *value = bridge->class << 16 | bridge->interface << 8 |
524                          bridge->revision;
525                 break;
526
527         case PCI_CACHE_LINE_SIZE:
528                 *value = bridge->bist << 24 | bridge->header_type << 16 |
529                          bridge->latency_timer << 8 | bridge->cache_line_size;
530                 break;
531
532         case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
533                 *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
534                 break;
535
536         case PCI_PRIMARY_BUS:
537                 *value = (bridge->secondary_latency_timer << 24 |
538                           bridge->subordinate_bus         << 16 |
539                           bridge->secondary_bus           <<  8 |
540                           bridge->primary_bus);
541                 break;
542
543         case PCI_IO_BASE:
544                 if (!mvebu_has_ioport(port))
545                         *value = bridge->secondary_status << 16;
546                 else
547                         *value = (bridge->secondary_status << 16 |
548                                   bridge->iolimit          <<  8 |
549                                   bridge->iobase);
550                 break;
551
552         case PCI_MEMORY_BASE:
553                 *value = (bridge->memlimit << 16 | bridge->membase);
554                 break;
555
556         case PCI_PREF_MEMORY_BASE:
557                 *value = 0;
558                 break;
559
560         case PCI_IO_BASE_UPPER16:
561                 *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
562                 break;
563
564         case PCI_CAPABILITY_LIST:
565                 *value = PCISWCAP;
566                 break;
567
568         case PCI_ROM_ADDRESS1:
569                 *value = 0;
570                 break;
571
572         case PCI_INTERRUPT_LINE:
573                 /* LINE PIN MIN_GNT MAX_LAT */
574                 *value = 0;
575                 break;
576
577         case PCISWCAP_EXP_LIST_ID:
578                 /* Set PCIe v2, root port, slot support */
579                 *value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
580                           PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
581                 break;
582
583         case PCISWCAP_EXP_DEVCAP:
584                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
585                 break;
586
587         case PCISWCAP_EXP_DEVCTL:
588                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
589                                  ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
590                                    PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
591                 *value |= bridge->pcie_devctl;
592                 break;
593
594         case PCISWCAP_EXP_LNKCAP:
595                 /*
596                  * PCIe requires the clock power management capability to be
597                  * hard-wired to zero for downstream ports
598                  */
599                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
600                          ~PCI_EXP_LNKCAP_CLKPM;
601                 break;
602
603         case PCISWCAP_EXP_LNKCTL:
604                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
605                 break;
606
607         case PCISWCAP_EXP_SLTCAP:
608                 *value = bridge->pcie_sltcap;
609                 break;
610
611         case PCISWCAP_EXP_SLTCTL:
612                 *value = PCI_EXP_SLTSTA_PDS << 16;
613                 break;
614
615         case PCISWCAP_EXP_RTCTL:
616                 *value = bridge->pcie_rtctl;
617                 break;
618
619         case PCISWCAP_EXP_RTSTA:
620                 *value = mvebu_readl(port, PCIE_RC_RTSTA);
621                 break;
622
623         /* PCIe requires the v2 fields to be hard-wired to zero */
624         case PCISWCAP_EXP_DEVCAP2:
625         case PCISWCAP_EXP_DEVCTL2:
626         case PCISWCAP_EXP_LNKCAP2:
627         case PCISWCAP_EXP_LNKCTL2:
628         case PCISWCAP_EXP_SLTCAP2:
629         case PCISWCAP_EXP_SLTCTL2:
630         default:
631                 /*
632                  * PCI defines configuration read accesses to reserved or
633                  * unimplemented registers to read as zero and complete
634                  * normally.
635                  */
636                 *value = 0;
637                 return PCIBIOS_SUCCESSFUL;
638         }
639
640         if (size == 2)
641                 *value = (*value >> (8 * (where & 3))) & 0xffff;
642         else if (size == 1)
643                 *value = (*value >> (8 * (where & 3))) & 0xff;
644
645         return PCIBIOS_SUCCESSFUL;
646 }
647
648 /* Write to the PCI-to-PCI bridge configuration space */
649 static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
650                                      unsigned int where, int size, u32 value)
651 {
652         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
653         u32 mask, reg;
654         int err;
655
656         if (size == 4)
657                 mask = 0x0;
658         else if (size == 2)
659                 mask = ~(0xffff << ((where & 3) * 8));
660         else if (size == 1)
661                 mask = ~(0xff << ((where & 3) * 8));
662         else
663                 return PCIBIOS_BAD_REGISTER_NUMBER;
664
665         err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, &reg);
666         if (err)
667                 return err;
668
669         value = (reg & mask) | value << ((where & 3) * 8);
670
671         switch (where & ~3) {
672         case PCI_COMMAND:
673         {
674                 u32 old = bridge->command;
675
676                 if (!mvebu_has_ioport(port))
677                         value &= ~PCI_COMMAND_IO;
678
679                 bridge->command = value & 0xffff;
680                 if ((old ^ bridge->command) & PCI_COMMAND_IO)
681                         mvebu_pcie_handle_iobase_change(port);
682                 if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
683                         mvebu_pcie_handle_membase_change(port);
684                 break;
685         }
686
687         case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
688                 bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
689                 break;
690
691         case PCI_IO_BASE:
692                 /*
693                  * We also keep bit 1 set, it is a read-only bit that
694                  * indicates we support 32 bits addressing for the
695                  * I/O
696                  */
697                 bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
698                 bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
699                 mvebu_pcie_handle_iobase_change(port);
700                 break;
701
702         case PCI_MEMORY_BASE:
703                 bridge->membase = value & 0xffff;
704                 bridge->memlimit = value >> 16;
705                 mvebu_pcie_handle_membase_change(port);
706                 break;
707
708         case PCI_IO_BASE_UPPER16:
709                 bridge->iobaseupper = value & 0xffff;
710                 bridge->iolimitupper = value >> 16;
711                 mvebu_pcie_handle_iobase_change(port);
712                 break;
713
714         case PCI_PRIMARY_BUS:
715                 bridge->primary_bus             = value & 0xff;
716                 bridge->secondary_bus           = (value >> 8) & 0xff;
717                 bridge->subordinate_bus         = (value >> 16) & 0xff;
718                 bridge->secondary_latency_timer = (value >> 24) & 0xff;
719                 mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
720                 break;
721
722         case PCISWCAP_EXP_DEVCTL:
723                 /*
724                  * Armada370 data says these bits must always
725                  * be zero when in root complex mode.
726                  */
727                 value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
728                            PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
729
730                 /*
731                  * If the mask is 0xffff0000, then we only want to write
732                  * the device control register, rather than clearing the
733                  * RW1C bits in the device status register.  Mask out the
734                  * status register bits.
735                  */
736                 if (mask == 0xffff0000)
737                         value &= 0xffff;
738
739                 mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
740                 break;
741
742         case PCISWCAP_EXP_LNKCTL:
743                 /*
744                  * If we don't support CLKREQ, we must ensure that the
745                  * CLKREQ enable bit always reads zero.  Since we haven't
746                  * had this capability, and it's dependent on board wiring,
747                  * disable it for the time being.
748                  */
749                 value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
750
751                 /*
752                  * If the mask is 0xffff0000, then we only want to write
753                  * the link control register, rather than clearing the
754                  * RW1C bits in the link status register.  Mask out the
755                  * status register bits.
756                  */
757                 if (mask == 0xffff0000)
758                         value &= 0xffff;
759
760                 mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
761                 break;
762
763         case PCISWCAP_EXP_RTSTA:
764                 mvebu_writel(port, value, PCIE_RC_RTSTA);
765                 break;
766
767         default:
768                 break;
769         }
770
771         return PCIBIOS_SUCCESSFUL;
772 }
773
774 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
775 {
776         return sys->private_data;
777 }
778
779 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
780                                                     struct pci_bus *bus,
781                                                     int devfn)
782 {
783         int i;
784
785         for (i = 0; i < pcie->nports; i++) {
786                 struct mvebu_pcie_port *port = &pcie->ports[i];
787
788                 if (bus->number == 0 && port->devfn == devfn)
789                         return port;
790                 if (bus->number != 0 &&
791                     bus->number >= port->bridge.secondary_bus &&
792                     bus->number <= port->bridge.subordinate_bus)
793                         return port;
794         }
795
796         return NULL;
797 }
798
799 /* PCI configuration space write function */
800 static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
801                               int where, int size, u32 val)
802 {
803         struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
804         struct mvebu_pcie_port *port;
805         int ret;
806
807         port = mvebu_pcie_find_port(pcie, bus, devfn);
808         if (!port)
809                 return PCIBIOS_DEVICE_NOT_FOUND;
810
811         /* Access the emulated PCI-to-PCI bridge */
812         if (bus->number == 0)
813                 return mvebu_sw_pci_bridge_write(port, where, size, val);
814
815         if (!mvebu_pcie_link_up(port))
816                 return PCIBIOS_DEVICE_NOT_FOUND;
817
818         /* Access the real PCIe interface */
819         ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
820                                     where, size, val);
821
822         return ret;
823 }
824
825 /* PCI configuration space read function */
826 static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
827                               int size, u32 *val)
828 {
829         struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
830         struct mvebu_pcie_port *port;
831         int ret;
832
833         port = mvebu_pcie_find_port(pcie, bus, devfn);
834         if (!port) {
835                 *val = 0xffffffff;
836                 return PCIBIOS_DEVICE_NOT_FOUND;
837         }
838
839         /* Access the emulated PCI-to-PCI bridge */
840         if (bus->number == 0)
841                 return mvebu_sw_pci_bridge_read(port, where, size, val);
842
843         if (!mvebu_pcie_link_up(port)) {
844                 *val = 0xffffffff;
845                 return PCIBIOS_DEVICE_NOT_FOUND;
846         }
847
848         /* Access the real PCIe interface */
849         ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
850                                     where, size, val);
851
852         return ret;
853 }
854
855 static struct pci_ops mvebu_pcie_ops = {
856         .read = mvebu_pcie_rd_conf,
857         .write = mvebu_pcie_wr_conf,
858 };
859
860 static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
861 {
862         struct mvebu_pcie *pcie = sys_to_pcie(sys);
863         int err, i;
864
865         pcie->mem.name = "PCI MEM";
866         pcie->realio.name = "PCI I/O";
867
868         if (resource_size(&pcie->realio) != 0)
869                 pci_add_resource_offset(&sys->resources, &pcie->realio,
870                                         sys->io_offset);
871
872         pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
873         pci_add_resource(&sys->resources, &pcie->busn);
874
875         err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
876         if (err)
877                 return 0;
878
879         for (i = 0; i < pcie->nports; i++) {
880                 struct mvebu_pcie_port *port = &pcie->ports[i];
881
882                 if (!port->base)
883                         continue;
884                 mvebu_pcie_setup_hw(port);
885         }
886
887         return 1;
888 }
889
890 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
891                                                  const struct resource *res,
892                                                  resource_size_t start,
893                                                  resource_size_t size,
894                                                  resource_size_t align)
895 {
896         if (dev->bus->number != 0)
897                 return start;
898
899         /*
900          * On the PCI-to-PCI bridge side, the I/O windows must have at
901          * least a 64 KB size and the memory windows must have at
902          * least a 1 MB size. Moreover, MBus windows need to have a
903          * base address aligned on their size, and their size must be
904          * a power of two. This means that if the BAR doesn't have a
905          * power of two size, several MBus windows will actually be
906          * created. We need to ensure that the biggest MBus window
907          * (which will be the first one) is aligned on its size, which
908          * explains the rounddown_pow_of_two() being done here.
909          */
910         if (res->flags & IORESOURCE_IO)
911                 return round_up(start, max_t(resource_size_t, SZ_64K,
912                                              rounddown_pow_of_two(size)));
913         else if (res->flags & IORESOURCE_MEM)
914                 return round_up(start, max_t(resource_size_t, SZ_1M,
915                                              rounddown_pow_of_two(size)));
916         else
917                 return start;
918 }
919
920 static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
921 {
922         struct hw_pci hw;
923
924         memset(&hw, 0, sizeof(hw));
925
926 #ifdef CONFIG_PCI_MSI
927         hw.msi_ctrl = pcie->msi;
928 #endif
929
930         hw.nr_controllers = 1;
931         hw.private_data   = (void **)&pcie;
932         hw.setup          = mvebu_pcie_setup;
933         hw.map_irq        = of_irq_parse_and_map_pci;
934         hw.ops            = &mvebu_pcie_ops;
935         hw.align_resource = mvebu_pcie_align_resource;
936
937         pci_common_init_dev(&pcie->pdev->dev, &hw);
938 }
939
940 /*
941  * Looks up the list of register addresses encoded into the reg =
942  * <...> property for one that matches the given port/lane. Once
943  * found, maps it.
944  */
945 static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
946                                               struct device_node *np,
947                                               struct mvebu_pcie_port *port)
948 {
949         struct resource regs;
950         int ret = 0;
951
952         ret = of_address_to_resource(np, 0, &regs);
953         if (ret)
954                 return ERR_PTR(ret);
955
956         return devm_ioremap_resource(&pdev->dev, &regs);
957 }
958
959 #define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
960 #define    DT_TYPE_IO                 0x1
961 #define    DT_TYPE_MEM32              0x2
962 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
963 #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
964
965 static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
966                               unsigned long type,
967                               unsigned int *tgt,
968                               unsigned int *attr)
969 {
970         const int na = 3, ns = 2;
971         const __be32 *range;
972         int rlen, nranges, rangesz, pna, i;
973
974         *tgt = -1;
975         *attr = -1;
976
977         range = of_get_property(np, "ranges", &rlen);
978         if (!range)
979                 return -EINVAL;
980
981         pna = of_n_addr_cells(np);
982         rangesz = pna + na + ns;
983         nranges = rlen / sizeof(__be32) / rangesz;
984
985         for (i = 0; i < nranges; i++, range += rangesz) {
986                 u32 flags = of_read_number(range, 1);
987                 u32 slot = of_read_number(range + 1, 1);
988                 u64 cpuaddr = of_read_number(range + na, pna);
989                 unsigned long rtype;
990
991                 if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
992                         rtype = IORESOURCE_IO;
993                 else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
994                         rtype = IORESOURCE_MEM;
995                 else
996                         continue;
997
998                 if (slot == PCI_SLOT(devfn) && type == rtype) {
999                         *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
1000                         *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
1001                         return 0;
1002                 }
1003         }
1004
1005         return -ENOENT;
1006 }
1007
1008 static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
1009 {
1010         struct device_node *msi_node;
1011
1012         msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
1013                                     "msi-parent", 0);
1014         if (!msi_node)
1015                 return;
1016
1017         pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
1018         of_node_put(msi_node);
1019
1020         if (pcie->msi)
1021                 pcie->msi->dev = &pcie->pdev->dev;
1022 }
1023
1024 #ifdef CONFIG_PM_SLEEP
1025 static int mvebu_pcie_suspend(struct device *dev)
1026 {
1027         struct mvebu_pcie *pcie;
1028         int i;
1029
1030         pcie = dev_get_drvdata(dev);
1031         for (i = 0; i < pcie->nports; i++) {
1032                 struct mvebu_pcie_port *port = pcie->ports + i;
1033                 port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
1034         }
1035
1036         return 0;
1037 }
1038
1039 static int mvebu_pcie_resume(struct device *dev)
1040 {
1041         struct mvebu_pcie *pcie;
1042         int i;
1043
1044         pcie = dev_get_drvdata(dev);
1045         for (i = 0; i < pcie->nports; i++) {
1046                 struct mvebu_pcie_port *port = pcie->ports + i;
1047                 mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
1048                 mvebu_pcie_setup_hw(port);
1049         }
1050
1051         return 0;
1052 }
1053 #endif
1054
1055 static void mvebu_pcie_port_clk_put(void *data)
1056 {
1057         struct mvebu_pcie_port *port = data;
1058
1059         clk_put(port->clk);
1060 }
1061
1062 static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
1063         struct mvebu_pcie_port *port, struct device_node *child)
1064 {
1065         struct device *dev = &pcie->pdev->dev;
1066         enum of_gpio_flags flags;
1067         int reset_gpio, ret;
1068
1069         port->pcie = pcie;
1070
1071         if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
1072                 dev_warn(dev, "ignoring %s, missing pcie-port property\n",
1073                          of_node_full_name(child));
1074                 goto skip;
1075         }
1076
1077         if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
1078                 port->lane = 0;
1079
1080         port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
1081                                     port->lane);
1082         if (!port->name) {
1083                 ret = -ENOMEM;
1084                 goto err;
1085         }
1086
1087         port->devfn = of_pci_get_devfn(child);
1088         if (port->devfn < 0)
1089                 goto skip;
1090
1091         ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
1092                                  &port->mem_target, &port->mem_attr);
1093         if (ret < 0) {
1094                 dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
1095                         port->name);
1096                 goto skip;
1097         }
1098
1099         if (resource_size(&pcie->io) != 0) {
1100                 mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
1101                                    &port->io_target, &port->io_attr);
1102         } else {
1103                 port->io_target = -1;
1104                 port->io_attr = -1;
1105         }
1106
1107         reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
1108         if (reset_gpio == -EPROBE_DEFER) {
1109                 ret = reset_gpio;
1110                 goto err;
1111         }
1112
1113         if (gpio_is_valid(reset_gpio)) {
1114                 unsigned long gpio_flags;
1115
1116                 port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
1117                                                   port->name);
1118                 if (!port->reset_name) {
1119                         ret = -ENOMEM;
1120                         goto err;
1121                 }
1122
1123                 if (flags & OF_GPIO_ACTIVE_LOW) {
1124                         dev_info(dev, "%s: reset gpio is active low\n",
1125                                  of_node_full_name(child));
1126                         gpio_flags = GPIOF_ACTIVE_LOW |
1127                                      GPIOF_OUT_INIT_LOW;
1128                 } else {
1129                         gpio_flags = GPIOF_OUT_INIT_HIGH;
1130                 }
1131
1132                 ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
1133                                             port->reset_name);
1134                 if (ret) {
1135                         if (ret == -EPROBE_DEFER)
1136                                 goto err;
1137                         goto skip;
1138                 }
1139
1140                 port->reset_gpio = gpio_to_desc(reset_gpio);
1141         }
1142
1143         port->clk = of_clk_get_by_name(child, NULL);
1144         if (IS_ERR(port->clk)) {
1145                 dev_err(dev, "%s: cannot get clock\n", port->name);
1146                 goto skip;
1147         }
1148
1149         ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
1150         if (ret < 0) {
1151                 clk_put(port->clk);
1152                 goto err;
1153         }
1154
1155         return 1;
1156
1157 skip:
1158         ret = 0;
1159
1160         /* In the case of skipping, we need to free these */
1161         devm_kfree(dev, port->reset_name);
1162         port->reset_name = NULL;
1163         devm_kfree(dev, port->name);
1164         port->name = NULL;
1165
1166 err:
1167         return ret;
1168 }
1169
1170 /*
1171  * Power up a PCIe port.  PCIe requires the refclk to be stable for 100µs
1172  * prior to releasing PERST.  See table 2-4 in section 2.6.2 AC Specifications
1173  * of the PCI Express Card Electromechanical Specification, 1.1.
1174  */
1175 static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
1176 {
1177         int ret;
1178
1179         ret = clk_prepare_enable(port->clk);
1180         if (ret < 0)
1181                 return ret;
1182
1183         if (port->reset_gpio) {
1184                 u32 reset_udelay = 20000;
1185
1186                 of_property_read_u32(port->dn, "reset-delay-us",
1187                                      &reset_udelay);
1188
1189                 udelay(100);
1190
1191                 gpiod_set_value_cansleep(port->reset_gpio, 0);
1192                 msleep(reset_udelay / 1000);
1193         }
1194
1195         return 0;
1196 }
1197
1198 /*
1199  * Power down a PCIe port.  Strictly, PCIe requires us to place the card
1200  * in D3hot state before asserting PERST#.
1201  */
1202 static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
1203 {
1204         if (port->reset_gpio)
1205                 gpiod_set_value_cansleep(port->reset_gpio, 1);
1206
1207         clk_disable_unprepare(port->clk);
1208 }
1209
1210 static int mvebu_pcie_probe(struct platform_device *pdev)
1211 {
1212         struct device *dev = &pdev->dev;
1213         struct mvebu_pcie *pcie;
1214         struct device_node *np = dev->of_node;
1215         struct device_node *child;
1216         int num, i, ret;
1217
1218         pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
1219         if (!pcie)
1220                 return -ENOMEM;
1221
1222         pcie->pdev = pdev;
1223         platform_set_drvdata(pdev, pcie);
1224
1225         /* Get the PCIe memory and I/O aperture */
1226         mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
1227         if (resource_size(&pcie->mem) == 0) {
1228                 dev_err(dev, "invalid memory aperture size\n");
1229                 return -EINVAL;
1230         }
1231
1232         mvebu_mbus_get_pcie_io_aperture(&pcie->io);
1233
1234         if (resource_size(&pcie->io) != 0) {
1235                 pcie->realio.flags = pcie->io.flags;
1236                 pcie->realio.start = PCIBIOS_MIN_IO;
1237                 pcie->realio.end = min_t(resource_size_t,
1238                                          IO_SPACE_LIMIT,
1239                                          resource_size(&pcie->io) - 1);
1240         } else
1241                 pcie->realio = pcie->io;
1242
1243         /* Get the bus range */
1244         ret = of_pci_parse_bus_range(np, &pcie->busn);
1245         if (ret) {
1246                 dev_err(dev, "failed to parse bus-range property: %d\n", ret);
1247                 return ret;
1248         }
1249
1250         num = of_get_available_child_count(np);
1251
1252         pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
1253         if (!pcie->ports)
1254                 return -ENOMEM;
1255
1256         i = 0;
1257         for_each_available_child_of_node(np, child) {
1258                 struct mvebu_pcie_port *port = &pcie->ports[i];
1259
1260                 ret = mvebu_pcie_parse_port(pcie, port, child);
1261                 if (ret < 0) {
1262                         of_node_put(child);
1263                         return ret;
1264                 } else if (ret == 0) {
1265                         continue;
1266                 }
1267
1268                 port->dn = child;
1269                 i++;
1270         }
1271         pcie->nports = i;
1272
1273         for (i = 0; i < pcie->nports; i++) {
1274                 struct mvebu_pcie_port *port = &pcie->ports[i];
1275
1276                 child = port->dn;
1277                 if (!child)
1278                         continue;
1279
1280                 ret = mvebu_pcie_powerup(port);
1281                 if (ret < 0)
1282                         continue;
1283
1284                 port->base = mvebu_pcie_map_registers(pdev, child, port);
1285                 if (IS_ERR(port->base)) {
1286                         dev_err(dev, "%s: cannot map registers\n", port->name);
1287                         port->base = NULL;
1288                         mvebu_pcie_powerdown(port);
1289                         continue;
1290                 }
1291
1292                 mvebu_pcie_set_local_dev_nr(port, 1);
1293                 mvebu_sw_pci_bridge_init(port);
1294         }
1295
1296         pcie->nports = i;
1297
1298         for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
1299                 pci_ioremap_io(i, pcie->io.start + i);
1300
1301         mvebu_pcie_msi_enable(pcie);
1302         mvebu_pcie_enable(pcie);
1303
1304         platform_set_drvdata(pdev, pcie);
1305
1306         return 0;
1307 }
1308
1309 static const struct of_device_id mvebu_pcie_of_match_table[] = {
1310         { .compatible = "marvell,armada-xp-pcie", },
1311         { .compatible = "marvell,armada-370-pcie", },
1312         { .compatible = "marvell,dove-pcie", },
1313         { .compatible = "marvell,kirkwood-pcie", },
1314         {},
1315 };
1316
1317 static const struct dev_pm_ops mvebu_pcie_pm_ops = {
1318         SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
1319 };
1320
1321 static struct platform_driver mvebu_pcie_driver = {
1322         .driver = {
1323                 .name = "mvebu-pcie",
1324                 .of_match_table = mvebu_pcie_of_match_table,
1325                 /* driver unloading/unbinding currently not supported */
1326                 .suppress_bind_attrs = true,
1327                 .pm = &mvebu_pcie_pm_ops,
1328         },
1329         .probe = mvebu_pcie_probe,
1330 };
1331 builtin_platform_driver(mvebu_pcie_driver);