GNU Linux-libre 4.19.286-gnu1
[releases.git] / drivers / staging / rtl8192u / ieee80211 / ieee80211.h
1 /*
2  * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
3  * remains copyright by the original authors
4  *
5  * Portions of the merged code are based on Host AP (software wireless
6  * LAN access point) driver for Intersil Prism2/2.5/3.
7  *
8  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
9  * <jkmaline@cc.hut.fi>
10  * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
11  *
12  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13  * <jketreno@linux.intel.com>
14  * Copyright (c) 2004, Intel Corporation
15  *
16  * Modified for Realtek's wi-fi cards by Andrea Merello
17  * <andrea.merello@gmail.com>
18  *
19  * This program is free software; you can redistribute it and/or modify
20  * it under the terms of the GNU General Public License version 2 as
21  * published by the Free Software Foundation. See README and COPYING for
22  * more details.
23  */
24 #ifndef IEEE80211_H
25 #define IEEE80211_H
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/jiffies.h>
30 #include <linux/timer.h>
31 #include <linux/sched.h>
32 #include <linux/semaphore.h>
33 #include <linux/interrupt.h>
34
35 #include <linux/delay.h>
36 #include <linux/wireless.h>
37 #include <linux/ieee80211.h>
38
39 #include "rtl819x_HT.h"
40 #include "rtl819x_BA.h"
41 #include "rtl819x_TS.h"
42
43
44 #ifndef IW_MODE_MONITOR
45 #define IW_MODE_MONITOR 6
46 #endif
47
48 #ifndef IWEVCUSTOM
49 #define IWEVCUSTOM 0x8c02
50 #endif
51
52 #define KEY_TYPE_NA             0x0
53 #define KEY_TYPE_WEP40          0x1
54 #define KEY_TYPE_TKIP           0x2
55 #define KEY_TYPE_CCMP           0x4
56 #define KEY_TYPE_WEP104         0x5
57
58 /* added for rtl819x tx procedure */
59 #define MAX_QUEUE_SIZE          0x10
60
61 //
62 // 8190 queue mapping
63 //
64 #define BK_QUEUE                               0
65 #define BE_QUEUE                               1
66 #define VI_QUEUE                               2
67 #define VO_QUEUE                               3
68 #define HCCA_QUEUE                             4
69 #define TXCMD_QUEUE                            5
70 #define MGNT_QUEUE                             6
71 #define HIGH_QUEUE                             7
72 #define BEACON_QUEUE                           8
73
74 #define LOW_QUEUE                              BE_QUEUE
75 #define NORMAL_QUEUE                           MGNT_QUEUE
76
77 //added by amy for ps
78 #define SWRF_TIMEOUT                            50
79
80 //added by amy for LEAP related
81 #define IE_CISCO_FLAG_POSITION          0x08    // Flag byte: byte 8, numbered from 0.
82 #define SUPPORT_CKIP_MIC                        0x08    // bit3
83 #define SUPPORT_CKIP_PK                 0x10    // bit4
84 /* defined for skb cb field */
85 /* At most 28 byte */
86 struct cb_desc {
87         /* Tx Desc Related flags (8-9) */
88         u8 bLastIniPkt:1;
89         u8 bCmdOrInit:1;
90         u8 bFirstSeg:1;
91         u8 bLastSeg:1;
92         u8 bEncrypt:1;
93         u8 bTxDisableRateFallBack:1;
94         u8 bTxUseDriverAssingedRate:1;
95         u8 bHwSec:1; //indicate whether use Hw security. WB
96
97         u8 reserved1;
98
99         /* Tx Firmware Relaged flags (10-11)*/
100         u8 bCTSEnable:1;
101         u8 bRTSEnable:1;
102         u8 bUseShortGI:1;
103         u8 bUseShortPreamble:1;
104         u8 bTxEnableFwCalcDur:1;
105         u8 bAMPDUEnable:1;
106         u8 bRTSSTBC:1;
107         u8 RTSSC:1;
108
109         u8 bRTSBW:1;
110         u8 bPacketBW:1;
111         u8 bRTSUseShortPreamble:1;
112         u8 bRTSUseShortGI:1;
113         u8 bMulticast:1;
114         u8 bBroadcast:1;
115         //u8 reserved2:2;
116         u8 drv_agg_enable:1;
117         u8 reserved2:1;
118
119         /* Tx Desc related element(12-19) */
120         u8 rata_index;
121         u8 queue_index;
122         //u8 reserved3;
123         //u8 reserved4;
124         u16 txbuf_size;
125         //u8 reserved5;
126         u8 RATRIndex;
127         u8 reserved6;
128         u8 reserved7;
129         u8 reserved8;
130
131         /* Tx firmware related element(20-27) */
132         u8 data_rate;
133         u8 rts_rate;
134         u8 ampdu_factor;
135         u8 ampdu_density;
136         //u8 reserved9;
137         //u8 reserved10;
138         //u8 reserved11;
139         u8 DrvAggrNum;
140         u16 pkt_size;
141         u8 reserved12;
142 };
143
144 /*--------------------------Define -------------------------------------------*/
145 #define MGN_1M                  0x02
146 #define MGN_2M                  0x04
147 #define MGN_5_5M                0x0b
148 #define MGN_11M                 0x16
149
150 #define MGN_6M                  0x0c
151 #define MGN_9M                  0x12
152 #define MGN_12M                 0x18
153 #define MGN_18M                 0x24
154 #define MGN_24M                 0x30
155 #define MGN_36M                 0x48
156 #define MGN_48M                 0x60
157 #define MGN_54M                 0x6c
158
159 #define MGN_MCS0                0x80
160 #define MGN_MCS1                0x81
161 #define MGN_MCS2                0x82
162 #define MGN_MCS3                0x83
163 #define MGN_MCS4                0x84
164 #define MGN_MCS5                0x85
165 #define MGN_MCS6                0x86
166 #define MGN_MCS7                0x87
167 #define MGN_MCS8                0x88
168 #define MGN_MCS9                0x89
169 #define MGN_MCS10               0x8a
170 #define MGN_MCS11               0x8b
171 #define MGN_MCS12               0x8c
172 #define MGN_MCS13               0x8d
173 #define MGN_MCS14               0x8e
174 #define MGN_MCS15               0x8f
175
176 #define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A || \
177                     priv->ieee80211->current_network.mode == IEEE_N_24G || \
178                     priv->ieee80211->current_network.mode == IEEE_N_5G) ? \
179                    16 : 10)
180
181 #define MGMT_QUEUE_NUM 5
182
183 #define IEEE_CMD_SET_WPA_PARAM                  1
184 #define IEEE_CMD_SET_WPA_IE                     2
185 #define IEEE_CMD_SET_ENCRYPTION                 3
186 #define IEEE_CMD_MLME                           4
187
188 #define IEEE_PARAM_WPA_ENABLED                  1
189 #define IEEE_PARAM_TKIP_COUNTERMEASURES         2
190 #define IEEE_PARAM_DROP_UNENCRYPTED             3
191 #define IEEE_PARAM_PRIVACY_INVOKED              4
192 #define IEEE_PARAM_AUTH_ALGS                    5
193 #define IEEE_PARAM_IEEE_802_1X                  6
194 //It should consistent with the driver_XXX.c
195 //   David, 2006.9.26
196 #define IEEE_PARAM_WPAX_SELECT                  7
197 //Added for notify the encryption type selection
198 //   David, 2006.9.26
199 #define IEEE_PROTO_WPA                          1
200 #define IEEE_PROTO_RSN                          2
201 //Added for notify the encryption type selection
202 //   David, 2006.9.26
203 #define IEEE_WPAX_USEGROUP                      0
204 #define IEEE_WPAX_WEP40                         1
205 #define IEEE_WPAX_TKIP                          2
206 #define IEEE_WPAX_WRAP                          3
207 #define IEEE_WPAX_CCMP                          4
208 #define IEEE_WPAX_WEP104                        5
209
210 #define IEEE_KEY_MGMT_IEEE8021X                 1
211 #define IEEE_KEY_MGMT_PSK                       2
212
213 #define IEEE_MLME_STA_DEAUTH                    1
214 #define IEEE_MLME_STA_DISASSOC                  2
215
216
217 #define IEEE_CRYPT_ERR_UNKNOWN_ALG              2
218 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR             3
219 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED        4
220 #define IEEE_CRYPT_ERR_KEY_SET_FAILED           5
221 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED        6
222 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED         7
223
224
225 #define IEEE_CRYPT_ALG_NAME_LEN                 16
226
227 #define MAX_IE_LEN  0xff
228
229 // added for kernel conflict
230 #define ieee80211_crypt_deinit_entries  ieee80211_crypt_deinit_entries_rsl
231 #define ieee80211_crypt_deinit_handler  ieee80211_crypt_deinit_handler_rsl
232 #define ieee80211_crypt_delayed_deinit  ieee80211_crypt_delayed_deinit_rsl
233 #define ieee80211_register_crypto_ops   ieee80211_register_crypto_ops_rsl
234 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
235 #define ieee80211_get_crypto_ops        ieee80211_get_crypto_ops_rsl
236
237 #define ieee80211_ccmp_null             ieee80211_ccmp_null_rsl
238
239 #define ieee80211_tkip_null             ieee80211_tkip_null_rsl
240
241 #define free_ieee80211                  free_ieee80211_rsl
242 #define alloc_ieee80211                 alloc_ieee80211_rsl
243
244 #define ieee80211_rx                    ieee80211_rx_rsl
245 #define ieee80211_rx_mgt                ieee80211_rx_mgt_rsl
246
247 #define ieee80211_get_beacon            ieee80211_get_beacon_rsl
248 #define ieee80211_wake_queue            ieee80211_wake_queue_rsl
249 #define ieee80211_stop_queue            ieee80211_stop_queue_rsl
250 #define ieee80211_reset_queue           ieee80211_reset_queue_rsl
251 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
252 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
253 #define ieee80211_is_shortslot          ieee80211_is_shortslot_rsl
254 #define ieee80211_is_54g                ieee80211_is_54g_rsl
255 #define ieee80211_wpa_supplicant_ioctl  ieee80211_wpa_supplicant_ioctl_rsl
256 #define ieee80211_ps_tx_ack             ieee80211_ps_tx_ack_rsl
257 #define ieee80211_softmac_xmit          ieee80211_softmac_xmit_rsl
258 #define ieee80211_stop_send_beacons     ieee80211_stop_send_beacons_rsl
259 #define notify_wx_assoc_event           notify_wx_assoc_event_rsl
260 #define SendDisassociation              SendDisassociation_rsl
261 #define ieee80211_disassociate          ieee80211_disassociate_rsl
262 #define ieee80211_start_send_beacons    ieee80211_start_send_beacons_rsl
263 #define ieee80211_stop_scan             ieee80211_stop_scan_rsl
264 #define ieee80211_send_probe_requests   ieee80211_send_probe_requests_rsl
265 #define ieee80211_softmac_scan_syncro   ieee80211_softmac_scan_syncro_rsl
266 #define ieee80211_start_scan_syncro     ieee80211_start_scan_syncro_rsl
267
268 #define ieee80211_wx_get_essid          ieee80211_wx_get_essid_rsl
269 #define ieee80211_wx_set_essid          ieee80211_wx_set_essid_rsl
270 #define ieee80211_wx_set_rate           ieee80211_wx_set_rate_rsl
271 #define ieee80211_wx_get_rate           ieee80211_wx_get_rate_rsl
272 #define ieee80211_wx_set_wap            ieee80211_wx_set_wap_rsl
273 #define ieee80211_wx_get_wap            ieee80211_wx_get_wap_rsl
274 #define ieee80211_wx_set_mode           ieee80211_wx_set_mode_rsl
275 #define ieee80211_wx_get_mode           ieee80211_wx_get_mode_rsl
276 #define ieee80211_wx_set_scan           ieee80211_wx_set_scan_rsl
277 #define ieee80211_wx_get_freq           ieee80211_wx_get_freq_rsl
278 #define ieee80211_wx_set_freq           ieee80211_wx_set_freq_rsl
279 #define ieee80211_wx_set_rawtx          ieee80211_wx_set_rawtx_rsl
280 #define ieee80211_wx_get_name           ieee80211_wx_get_name_rsl
281 #define ieee80211_wx_set_power          ieee80211_wx_set_power_rsl
282 #define ieee80211_wx_get_power          ieee80211_wx_get_power_rsl
283 #define ieee80211_wlan_frequencies      ieee80211_wlan_frequencies_rsl
284 #define ieee80211_wx_set_rts            ieee80211_wx_set_rts_rsl
285 #define ieee80211_wx_get_rts            ieee80211_wx_get_rts_rsl
286
287 #define ieee80211_txb_free              ieee80211_txb_free_rsl
288
289 #define ieee80211_wx_set_gen_ie         ieee80211_wx_set_gen_ie_rsl
290 #define ieee80211_wx_get_scan           ieee80211_wx_get_scan_rsl
291 #define ieee80211_wx_set_encode         ieee80211_wx_set_encode_rsl
292 #define ieee80211_wx_get_encode         ieee80211_wx_get_encode_rsl
293 #define ieee80211_wx_set_mlme           ieee80211_wx_set_mlme_rsl
294 #define ieee80211_wx_set_auth           ieee80211_wx_set_auth_rsl
295 #define ieee80211_wx_set_encode_ext     ieee80211_wx_set_encode_ext_rsl
296 #define ieee80211_wx_get_encode_ext     ieee80211_wx_get_encode_ext_rsl
297
298
299 typedef struct ieee_param {
300         u32 cmd;
301         u8 sta_addr[ETH_ALEN];
302         union {
303                 struct {
304                         u8 name;
305                         u32 value;
306                 } wpa_param;
307                 struct {
308                         u32 len;
309                         u8 reserved[32];
310                         u8 data[0];
311                 } wpa_ie;
312                 struct{
313                         int command;
314                         int reason_code;
315                 } mlme;
316                 struct {
317                         u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
318                         u8 set_tx;
319                         u32 err;
320                         u8 idx;
321                         u8 seq[8]; /* sequence counter (set: RX, get: TX) */
322                         u16 key_len;
323                         u8 key[0];
324                 } crypt;
325         } u;
326 } ieee_param;
327
328
329 // linux under 2.6.9 release may not support it, so modify it for common use
330 #define IEEE80211_DATA_LEN              2304
331 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
332  *   6.2.1.1.2.
333  *
334  *   The figure in section 7.1.2 suggests a body size of up to 2312
335  *   bytes is allowed, which is a bit confusing, I suspect this
336  *   represents the 2304 bytes of real data, plus a possible 8 bytes of
337  *   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
338  */
339 #define IEEE80211_1ADDR_LEN 10
340 #define IEEE80211_2ADDR_LEN 16
341 #define IEEE80211_3ADDR_LEN 24
342 #define IEEE80211_4ADDR_LEN 30
343 #define IEEE80211_FCS_LEN    4
344 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
345 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
346 #define IEEE80211_MGMT_HDR_LEN 24
347 #define IEEE80211_DATA_HDR3_LEN 24
348 #define IEEE80211_DATA_HDR4_LEN 30
349
350 #define MIN_FRAG_THRESHOLD     256U
351 #define MAX_FRAG_THRESHOLD     2346U
352
353
354 /* Frame control field constants */
355 #define IEEE80211_FCTL_VERS             0x0003
356 #define IEEE80211_FCTL_FTYPE            0x000c
357 #define IEEE80211_FCTL_STYPE            0x00f0
358 #define IEEE80211_FCTL_FRAMETYPE        0x00fc
359 #define IEEE80211_FCTL_TODS             0x0100
360 #define IEEE80211_FCTL_FROMDS           0x0200
361 #define IEEE80211_FCTL_DSTODS           0x0300 //added by david
362 #define IEEE80211_FCTL_MOREFRAGS        0x0400
363 #define IEEE80211_FCTL_RETRY            0x0800
364 #define IEEE80211_FCTL_PM               0x1000
365 #define IEEE80211_FCTL_MOREDATA         0x2000
366 #define IEEE80211_FCTL_WEP              0x4000
367 #define IEEE80211_FCTL_ORDER            0x8000
368
369 #define IEEE80211_FTYPE_MGMT            0x0000
370 #define IEEE80211_FTYPE_CTL             0x0004
371 #define IEEE80211_FTYPE_DATA            0x0008
372
373 /* management */
374 #define IEEE80211_STYPE_ASSOC_REQ       0x0000
375 #define IEEE80211_STYPE_ASSOC_RESP      0x0010
376 #define IEEE80211_STYPE_REASSOC_REQ     0x0020
377 #define IEEE80211_STYPE_REASSOC_RESP    0x0030
378 #define IEEE80211_STYPE_PROBE_REQ       0x0040
379 #define IEEE80211_STYPE_PROBE_RESP      0x0050
380 #define IEEE80211_STYPE_BEACON          0x0080
381 #define IEEE80211_STYPE_ATIM            0x0090
382 #define IEEE80211_STYPE_DISASSOC        0x00A0
383 #define IEEE80211_STYPE_AUTH            0x00B0
384 #define IEEE80211_STYPE_DEAUTH          0x00C0
385 #define IEEE80211_STYPE_MANAGE_ACT      0x00D0
386
387 /* control */
388 #define IEEE80211_STYPE_PSPOLL          0x00A0
389 #define IEEE80211_STYPE_RTS             0x00B0
390 #define IEEE80211_STYPE_CTS             0x00C0
391 #define IEEE80211_STYPE_ACK             0x00D0
392 #define IEEE80211_STYPE_CFEND           0x00E0
393 #define IEEE80211_STYPE_CFENDACK        0x00F0
394 #define IEEE80211_STYPE_BLOCKACK   0x0094
395
396 /* data */
397 #define IEEE80211_STYPE_DATA            0x0000
398 #define IEEE80211_STYPE_DATA_CFACK      0x0010
399 #define IEEE80211_STYPE_DATA_CFPOLL     0x0020
400 #define IEEE80211_STYPE_DATA_CFACKPOLL  0x0030
401 #define IEEE80211_STYPE_NULLFUNC        0x0040
402 #define IEEE80211_STYPE_CFACK           0x0050
403 #define IEEE80211_STYPE_CFPOLL          0x0060
404 #define IEEE80211_STYPE_CFACKPOLL       0x0070
405 #define IEEE80211_STYPE_QOS_DATA        0x0080 //added for WMM 2006/8/2
406 #define IEEE80211_STYPE_QOS_NULL        0x00C0
407
408 #define IEEE80211_SCTL_FRAG             0x000F
409 #define IEEE80211_SCTL_SEQ              0xFFF0
410
411 /* QOS control */
412 #define IEEE80211_QCTL_TID              0x000F
413
414 #define FC_QOS_BIT                                      BIT(7)
415 #define IsDataFrame(pdu)                        (((pdu[0] & 0x0C) == 0x08) ? true : false)
416 #define IsLegacyDataFrame(pdu)  (IsDataFrame(pdu) && (!(pdu[0] & FC_QOS_BIT)))
417 //added by wb. Is this right?
418 #define IsQoSDataFrame(pframe)  ((*(u16 *)pframe & (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
419 #define Frame_Order(pframe)     (*(u16 *)pframe & IEEE80211_FCTL_ORDER)
420 #define SN_LESS(a, b)           (((a - b) & 0x800) != 0)
421 #define SN_EQUAL(a, b)  (a == b)
422 #define MAX_DEV_ADDR_SIZE 8
423 typedef enum _ACT_CATEGORY {
424         ACT_CAT_QOS = 1,
425         ACT_CAT_DLS = 2,
426         ACT_CAT_BA  = 3,
427         ACT_CAT_HT  = 7,
428         ACT_CAT_WMM = 17,
429 } ACT_CATEGORY, *PACT_CATEGORY;
430
431 typedef enum _TS_ACTION {
432         ACT_ADDTSREQ = 0,
433         ACT_ADDTSRSP = 1,
434         ACT_DELTS    = 2,
435         ACT_SCHEDULE = 3,
436 } TS_ACTION, *PTS_ACTION;
437
438 typedef enum _BA_ACTION {
439         ACT_ADDBAREQ = 0,
440         ACT_ADDBARSP = 1,
441         ACT_DELBA    = 2,
442 } BA_ACTION, *PBA_ACTION;
443
444 typedef enum _InitialGainOpType {
445         IG_Backup = 0,
446         IG_Restore,
447         IG_Max
448 } InitialGainOpType;
449
450 /* debug macros */
451 #define CONFIG_IEEE80211_DEBUG
452 #ifdef CONFIG_IEEE80211_DEBUG
453 extern u32 ieee80211_debug_level;
454 #define IEEE80211_DEBUG(level, fmt, args...) \
455 do { if (ieee80211_debug_level & (level)) \
456   printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
457 //wb added to debug out data buf
458 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
459 #define IEEE80211_DEBUG_DATA(level, data, datalen)      \
460         do { if ((ieee80211_debug_level & (level)) == (level))  \
461                 {       \
462                         int i;                                  \
463                         u8 *pdata = (u8 *) data;                        \
464                         printk(KERN_DEBUG "ieee80211: %s()\n", __func__);       \
465                         for (i = 0; i < (int)(datalen); i++)                    \
466                         {                                               \
467                                 printk("%2x ", pdata[i]);               \
468                                 if ((i + 1) % 16 == 0) printk("\n");    \
469                         }                               \
470                         printk("\n");                   \
471                 }                                       \
472         } while (0)
473 #else
474 #define IEEE80211_DEBUG (level, fmt, args...) do {} while (0)
475 #define IEEE80211_DEBUG_DATA (level, data, datalen) do {} while(0)
476 #endif  /* CONFIG_IEEE80211_DEBUG */
477
478 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
479
480 /*
481  * To use the debug system;
482  *
483  * If you are defining a new debug classification, simply add it to the #define
484  * list here in the form of:
485  *
486  * #define IEEE80211_DL_xxxx VALUE
487  *
488  * shifting value to the left one bit from the previous entry.  xxxx should be
489  * the name of the classification (for example, WEP)
490  *
491  * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
492  * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
493  * to send output to that classification.
494  *
495  * To add your debug level to the list of levels seen when you perform
496  *
497  * % cat /proc/net/ipw/debug_level
498  *
499  * you simply need to add your entry to the ipw_debug_levels array.
500  *
501  * If you do not see debug_level in /proc/net/ipw then you do not have
502  * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
503  *
504  */
505
506 #define IEEE80211_DL_INFO          (1<<0)
507 #define IEEE80211_DL_WX            (1<<1)
508 #define IEEE80211_DL_SCAN          (1<<2)
509 #define IEEE80211_DL_STATE         (1<<3)
510 #define IEEE80211_DL_MGMT          (1<<4)
511 #define IEEE80211_DL_FRAG          (1<<5)
512 #define IEEE80211_DL_EAP           (1<<6)
513 #define IEEE80211_DL_DROP          (1<<7)
514
515 #define IEEE80211_DL_TX            (1<<8)
516 #define IEEE80211_DL_RX            (1<<9)
517
518 #define IEEE80211_DL_HT            (1<<10)  //HT
519 #define IEEE80211_DL_BA            (1<<11)  //ba
520 #define IEEE80211_DL_TS            (1<<12)  //TS
521 #define IEEE80211_DL_QOS           (1<<13)
522 #define IEEE80211_DL_REORDER       (1<<14)
523 #define IEEE80211_DL_IOT           (1<<15)
524 #define IEEE80211_DL_IPS           (1<<16)
525 #define IEEE80211_DL_TRACE         (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
526 #define IEEE80211_DL_DATA          (1<<30)   //use this flag to control whether print data buf out.
527 #define IEEE80211_DL_ERR           (1<<31)   //always open
528 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
529 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
530 #define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
531
532 #define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
533 #define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
534 #define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
535 #define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
536 #define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
537 #define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
538 #define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
539 #define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
540 #define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
541 #define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
542
543 #include <linux/if_arp.h> /* ARPHRD_ETHER */
544
545 #ifndef WIRELESS_SPY
546 #define WIRELESS_SPY            // enable iwspy support
547 #endif
548 #include <net/iw_handler.h>     // new driver API
549
550 #ifndef ETH_P_PAE
551 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
552 #endif /* ETH_P_PAE */
553
554 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
555
556 #ifndef ETH_P_80211_RAW
557 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
558 #endif
559
560 /* IEEE 802.11 defines */
561
562 #define P80211_OUI_LEN 3
563
564 struct ieee80211_snap_hdr {
565
566         u8    dsap;   /* always 0xAA */
567         u8    ssap;   /* always 0xAA */
568         u8    ctrl;   /* always 0x03 */
569         u8    oui[P80211_OUI_LEN];    /* organizational universal id */
570
571 } __packed;
572
573 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
574
575 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
576 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
577 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
578
579 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
580 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
581 #define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
582
583 #define WLAN_CAPABILITY_BSS (1<<0)
584 #define WLAN_CAPABILITY_IBSS (1<<1)
585 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
586 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
587 #define WLAN_CAPABILITY_PRIVACY (1<<4)
588 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
589 #define WLAN_CAPABILITY_PBCC (1<<6)
590 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
591 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
592 #define WLAN_CAPABILITY_QOS (1<<9)
593 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
594 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
595
596 /* 802.11g ERP information element */
597 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
598 #define WLAN_ERP_USE_PROTECTION (1<<1)
599 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
600
601 #define IEEE80211_STATMASK_SIGNAL (1<<0)
602 #define IEEE80211_STATMASK_RSSI (1<<1)
603 #define IEEE80211_STATMASK_NOISE (1<<2)
604 #define IEEE80211_STATMASK_RATE (1<<3)
605 #define IEEE80211_STATMASK_WEMASK 0x7
606
607 #define IEEE80211_CCK_MODULATION    (1<<0)
608 #define IEEE80211_OFDM_MODULATION   (1<<1)
609
610 #define IEEE80211_24GHZ_BAND     (1<<0)
611 #define IEEE80211_52GHZ_BAND     (1<<1)
612
613 #define IEEE80211_CCK_RATE_LEN                  4
614 #define IEEE80211_CCK_RATE_1MB                  0x02
615 #define IEEE80211_CCK_RATE_2MB                  0x04
616 #define IEEE80211_CCK_RATE_5MB                  0x0B
617 #define IEEE80211_CCK_RATE_11MB                 0x16
618 #define IEEE80211_OFDM_RATE_LEN                 8
619 #define IEEE80211_OFDM_RATE_6MB                 0x0C
620 #define IEEE80211_OFDM_RATE_9MB                 0x12
621 #define IEEE80211_OFDM_RATE_12MB                0x18
622 #define IEEE80211_OFDM_RATE_18MB                0x24
623 #define IEEE80211_OFDM_RATE_24MB                0x30
624 #define IEEE80211_OFDM_RATE_36MB                0x48
625 #define IEEE80211_OFDM_RATE_48MB                0x60
626 #define IEEE80211_OFDM_RATE_54MB                0x6C
627 #define IEEE80211_BASIC_RATE_MASK               0x80
628
629 #define IEEE80211_CCK_RATE_1MB_MASK             (1<<0)
630 #define IEEE80211_CCK_RATE_2MB_MASK             (1<<1)
631 #define IEEE80211_CCK_RATE_5MB_MASK             (1<<2)
632 #define IEEE80211_CCK_RATE_11MB_MASK            (1<<3)
633 #define IEEE80211_OFDM_RATE_6MB_MASK            (1<<4)
634 #define IEEE80211_OFDM_RATE_9MB_MASK            (1<<5)
635 #define IEEE80211_OFDM_RATE_12MB_MASK           (1<<6)
636 #define IEEE80211_OFDM_RATE_18MB_MASK           (1<<7)
637 #define IEEE80211_OFDM_RATE_24MB_MASK           (1<<8)
638 #define IEEE80211_OFDM_RATE_36MB_MASK           (1<<9)
639 #define IEEE80211_OFDM_RATE_48MB_MASK           (1<<10)
640 #define IEEE80211_OFDM_RATE_54MB_MASK           (1<<11)
641
642 #define IEEE80211_CCK_RATES_MASK                0x0000000F
643 #define IEEE80211_CCK_BASIC_RATES_MASK  (IEEE80211_CCK_RATE_1MB_MASK | \
644         IEEE80211_CCK_RATE_2MB_MASK)
645 #define IEEE80211_CCK_DEFAULT_RATES_MASK        (IEEE80211_CCK_BASIC_RATES_MASK | \
646         IEEE80211_CCK_RATE_5MB_MASK | \
647         IEEE80211_CCK_RATE_11MB_MASK)
648
649 #define IEEE80211_OFDM_RATES_MASK               0x00000FF0
650 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
651         IEEE80211_OFDM_RATE_12MB_MASK | \
652         IEEE80211_OFDM_RATE_24MB_MASK)
653 #define IEEE80211_OFDM_DEFAULT_RATES_MASK       (IEEE80211_OFDM_BASIC_RATES_MASK | \
654         IEEE80211_OFDM_RATE_9MB_MASK  | \
655         IEEE80211_OFDM_RATE_18MB_MASK | \
656         IEEE80211_OFDM_RATE_36MB_MASK | \
657         IEEE80211_OFDM_RATE_48MB_MASK | \
658         IEEE80211_OFDM_RATE_54MB_MASK)
659 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
660                                 IEEE80211_CCK_DEFAULT_RATES_MASK)
661
662 #define IEEE80211_NUM_OFDM_RATES            8
663 #define IEEE80211_NUM_CCK_RATES             4
664 #define IEEE80211_OFDM_SHIFT_MASK_A         4
665
666
667 /* this is stolen and modified from the madwifi driver*/
668 #define IEEE80211_FC0_TYPE_MASK         0x0c
669 #define IEEE80211_FC0_TYPE_DATA         0x08
670 #define IEEE80211_FC0_SUBTYPE_MASK      0xB0
671 #define IEEE80211_FC0_SUBTYPE_QOS       0x80
672
673 #define IEEE80211_QOS_HAS_SEQ(fc) \
674         (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
675          (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
676
677 /* this is stolen from ipw2200 driver */
678 #define IEEE_IBSS_MAC_HASH_SIZE 31
679 struct ieee_ibss_seq {
680         u8 mac[ETH_ALEN];
681         u16 seq_num[17];
682         u16 frag_num[17];
683         unsigned long packet_time[17];
684         struct list_head list;
685 };
686
687 /* NOTE: This data is for statistical purposes; not all hardware provides this
688  *       information for frames received.  Not setting these will not cause
689  *       any adverse affects.
690  */
691 struct ieee80211_rx_stats {
692         u32 mac_time[2];
693         s8 rssi;
694         u8 signal;
695         u8 noise;
696         u16 rate; /* in 100 kbps */
697         u8 received_channel;
698         u8 control;
699         u8 mask;
700         u8 freq;
701         u16 len;
702         u64 tsf;
703         u32 beacon_time;
704         u8 nic_type;
705         u16       Length;
706         //      u8        DataRate;      // In 0.5 Mbps
707         u8        SignalQuality; // in 0-100 index.
708         s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
709         s8        RxPower; // in dBm Translate from PWdB
710         u8        SignalStrength; // in 0-100 index.
711         u16       bHwError:1;
712         u16       bCRC:1;
713         u16       bICV:1;
714         u16       bShortPreamble:1;
715         u16       Antenna:1;      //for rtl8185
716         u16       Decrypted:1;    //for rtl8185, rtl8187
717         u16       Wakeup:1;       //for rtl8185
718         u16       Reserved0:1;    //for rtl8185
719         u8        AGC;
720         u32       TimeStampLow;
721         u32       TimeStampHigh;
722         bool      bShift;
723         bool      bIsQosData;             // Added by Annie, 2005-12-22.
724         u8        UserPriority;
725
726         //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
727         //1Attention Please!!!<11n or 8190 specific code should be put below this line>
728         //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
729
730         u8        RxDrvInfoSize;
731         u8        RxBufShift;
732         bool      bIsAMPDU;
733         bool      bFirstMPDU;
734         bool      bContainHTC;
735         bool      RxIs40MHzPacket;
736         u32       RxPWDBAll;
737         u8        RxMIMOSignalStrength[4];        // in 0~100 index
738         s8        RxMIMOSignalQuality[2];
739         bool      bPacketMatchBSSID;
740         bool      bIsCCK;
741         bool      bPacketToSelf;
742         //added by amy
743         u8        *virtual_address;
744         u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
745         u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
746         u16          fragoffset;                        // Data offset for this fragment
747         u16          ntotalfrag;
748         bool              bisrxaggrsubframe;
749         bool              bPacketBeacon;        //cosa add for rssi
750         bool              bToSelfBA;            //cosa add for rssi
751         s8                cck_adc_pwdb[4];      //cosa add for rx path selection
752         u16               Seq_Num;
753
754 };
755
756 /* IEEE 802.11 requires that STA supports concurrent reception of at least
757  * three fragmented frames. This define can be increased to support more
758  * concurrent frames, but it should be noted that each entry can consume about
759  * 2 kB of RAM and increasing cache size will slow down frame reassembly.
760  */
761 #define IEEE80211_FRAG_CACHE_LEN 4
762
763 struct ieee80211_frag_entry {
764         unsigned long first_frag_time;
765         unsigned int seq;
766         unsigned int last_frag;
767         struct sk_buff *skb;
768         u8 src_addr[ETH_ALEN];
769         u8 dst_addr[ETH_ALEN];
770 };
771
772 struct ieee80211_stats {
773         unsigned int tx_unicast_frames;
774         unsigned int tx_multicast_frames;
775         unsigned int tx_fragments;
776         unsigned int tx_unicast_octets;
777         unsigned int tx_multicast_octets;
778         unsigned int tx_deferred_transmissions;
779         unsigned int tx_single_retry_frames;
780         unsigned int tx_multiple_retry_frames;
781         unsigned int tx_retry_limit_exceeded;
782         unsigned int tx_discards;
783         unsigned int rx_unicast_frames;
784         unsigned int rx_multicast_frames;
785         unsigned int rx_fragments;
786         unsigned int rx_unicast_octets;
787         unsigned int rx_multicast_octets;
788         unsigned int rx_fcs_errors;
789         unsigned int rx_discards_no_buffer;
790         unsigned int tx_discards_wrong_sa;
791         unsigned int rx_discards_undecryptable;
792         unsigned int rx_message_in_msg_fragments;
793         unsigned int rx_message_in_bad_msg_fragments;
794 };
795
796 struct ieee80211_device;
797
798 #include "ieee80211_crypt.h"
799
800 #define SEC_KEY_1         (1<<0)
801 #define SEC_KEY_2         (1<<1)
802 #define SEC_KEY_3         (1<<2)
803 #define SEC_KEY_4         (1<<3)
804 #define SEC_ACTIVE_KEY    (1<<4)
805 #define SEC_AUTH_MODE     (1<<5)
806 #define SEC_UNICAST_GROUP (1<<6)
807 #define SEC_LEVEL         (1<<7)
808 #define SEC_ENABLED       (1<<8)
809 #define SEC_ENCRYPT       (1<<9)
810
811 #define SEC_LEVEL_0      0 /* None */
812 #define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
813 #define SEC_LEVEL_2      2 /* Level 1 + TKIP */
814 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
815 #define SEC_LEVEL_3      4 /* Level 2 + CCMP */
816
817 #define SEC_ALG_NONE            0
818 #define SEC_ALG_WEP             1
819 #define SEC_ALG_TKIP            2
820 #define SEC_ALG_CCMP            3
821
822 #define WEP_KEYS                4
823 #define WEP_KEY_LEN             13
824 #define SCM_KEY_LEN             32
825 #define SCM_TEMPORAL_KEY_LENGTH 16
826
827 struct ieee80211_security {
828         u16 active_key:2,
829             enabled:1,
830             auth_algo:4,
831             unicast_uses_group:1,
832             encrypt:1;
833         u8 auth_mode;
834         u8 key_sizes[WEP_KEYS];
835         u8 keys[WEP_KEYS][SCM_KEY_LEN];
836         u8 level;
837         u16 flags;
838 } __packed;
839
840
841 /*
842  *  802.11 data frame from AP
843  *       ,-------------------------------------------------------------------.
844  * Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
845  *       |------|------|---------|---------|---------|------|---------|------|
846  * Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
847  *       |      | tion | (BSSID) |         |         | ence |  data   |      |
848  *       `-------------------------------------------------------------------'
849  *  Total: 28-2340 bytes
850  */
851
852 /* Management Frame Information Element Types */
853 enum ieee80211_mfie {
854         MFIE_TYPE_SSID = 0,
855         MFIE_TYPE_RATES = 1,
856         MFIE_TYPE_FH_SET = 2,
857         MFIE_TYPE_DS_SET = 3,
858         MFIE_TYPE_CF_SET = 4,
859         MFIE_TYPE_TIM = 5,
860         MFIE_TYPE_IBSS_SET = 6,
861         MFIE_TYPE_COUNTRY = 7,
862         MFIE_TYPE_HOP_PARAMS = 8,
863         MFIE_TYPE_HOP_TABLE = 9,
864         MFIE_TYPE_REQUEST = 10,
865         MFIE_TYPE_CHALLENGE = 16,
866         MFIE_TYPE_POWER_CONSTRAINT = 32,
867         MFIE_TYPE_POWER_CAPABILITY = 33,
868         MFIE_TYPE_TPC_REQUEST = 34,
869         MFIE_TYPE_TPC_REPORT = 35,
870         MFIE_TYPE_SUPP_CHANNELS = 36,
871         MFIE_TYPE_CSA = 37,
872         MFIE_TYPE_MEASURE_REQUEST = 38,
873         MFIE_TYPE_MEASURE_REPORT = 39,
874         MFIE_TYPE_QUIET = 40,
875         MFIE_TYPE_IBSS_DFS = 41,
876         MFIE_TYPE_ERP = 42,
877         MFIE_TYPE_RSN = 48,
878         MFIE_TYPE_RATES_EX = 50,
879         MFIE_TYPE_HT_CAP = 45,
880          MFIE_TYPE_HT_INFO = 61,
881          MFIE_TYPE_AIRONET = 133,
882         MFIE_TYPE_GENERIC = 221,
883         MFIE_TYPE_QOS_PARAMETER = 222,
884 };
885
886 /* Minimal header; can be used for passing 802.11 frames with sufficient
887  * information to determine what type of underlying data type is actually
888  * stored in the data.
889  */
890 struct rtl_80211_hdr {
891         __le16 frame_ctl;
892         __le16 duration_id;
893         u8 payload[0];
894 } __packed;
895
896 struct rtl_80211_hdr_1addr {
897         __le16 frame_ctl;
898         __le16 duration_id;
899         u8 addr1[ETH_ALEN];
900         u8 payload[0];
901 } __packed;
902
903 struct rtl_80211_hdr_2addr {
904         __le16 frame_ctl;
905         __le16 duration_id;
906         u8 addr1[ETH_ALEN];
907         u8 addr2[ETH_ALEN];
908         u8 payload[0];
909 } __packed;
910
911 struct rtl_80211_hdr_3addr {
912         __le16 frame_ctl;
913         __le16 duration_id;
914         u8 addr1[ETH_ALEN];
915         u8 addr2[ETH_ALEN];
916         u8 addr3[ETH_ALEN];
917         __le16 seq_ctl;
918         u8 payload[0];
919 } __packed;
920
921 struct rtl_80211_hdr_4addr {
922         __le16 frame_ctl;
923         __le16 duration_id;
924         u8 addr1[ETH_ALEN];
925         u8 addr2[ETH_ALEN];
926         u8 addr3[ETH_ALEN];
927         __le16 seq_ctl;
928         u8 addr4[ETH_ALEN];
929         u8 payload[0];
930 } __packed;
931
932 struct rtl_80211_hdr_3addrqos {
933         __le16 frame_ctl;
934         __le16 duration_id;
935         u8 addr1[ETH_ALEN];
936         u8 addr2[ETH_ALEN];
937         u8 addr3[ETH_ALEN];
938         __le16 seq_ctl;
939         u8 payload[0];
940         __le16 qos_ctl;
941 } __packed;
942
943 struct rtl_80211_hdr_4addrqos {
944         __le16 frame_ctl;
945         __le16 duration_id;
946         u8 addr1[ETH_ALEN];
947         u8 addr2[ETH_ALEN];
948         u8 addr3[ETH_ALEN];
949         __le16 seq_ctl;
950         u8 addr4[ETH_ALEN];
951         u8 payload[0];
952         __le16 qos_ctl;
953 } __packed;
954
955 struct ieee80211_info_element {
956         u8 id;
957         u8 len;
958         u8 data[0];
959 } __packed;
960
961 struct ieee80211_authentication {
962         struct rtl_80211_hdr_3addr header;
963         __le16 algorithm;
964         __le16 transaction;
965         __le16 status;
966         /*challenge*/
967         struct ieee80211_info_element info_element[0];
968 } __packed;
969
970 struct ieee80211_disassoc {
971         struct rtl_80211_hdr_3addr header;
972         __le16 reason;
973 } __packed;
974
975 struct ieee80211_probe_request {
976         struct rtl_80211_hdr_3addr header;
977         /* SSID, supported rates */
978         struct ieee80211_info_element info_element[0];
979 } __packed;
980
981 struct ieee80211_probe_response {
982         struct rtl_80211_hdr_3addr header;
983         __le32 time_stamp[2];
984         __le16 beacon_interval;
985         __le16 capability;
986         /* SSID, supported rates, FH params, DS params,
987          * CF params, IBSS params, TIM (if beacon), RSN
988          */
989         struct ieee80211_info_element info_element[0];
990 } __packed;
991
992 /* Alias beacon for probe_response */
993 #define ieee80211_beacon ieee80211_probe_response
994
995 struct ieee80211_assoc_request_frame {
996         struct rtl_80211_hdr_3addr header;
997         __le16 capability;
998         __le16 listen_interval;
999         /* SSID, supported rates, RSN */
1000         struct ieee80211_info_element info_element[0];
1001 } __packed;
1002
1003 struct ieee80211_reassoc_request_frame {
1004         struct rtl_80211_hdr_3addr header;
1005         __le16 capability;
1006         __le16 listen_interval;
1007         u8 current_ap[ETH_ALEN];
1008         /* SSID, supported rates, RSN */
1009         struct ieee80211_info_element info_element[0];
1010 } __packed;
1011
1012 struct ieee80211_assoc_response_frame {
1013         struct rtl_80211_hdr_3addr header;
1014         __le16 capability;
1015         __le16 status;
1016         __le16 aid;
1017         struct ieee80211_info_element info_element[0]; /* supported rates */
1018 } __packed;
1019
1020 struct ieee80211_txb {
1021         u8 nr_frags;
1022         u8 encrypted;
1023         u8 queue_index;
1024         u8 rts_included;
1025         u16 reserved;
1026         __le16 frag_size;
1027         __le16 payload_size;
1028         struct sk_buff *fragments[0];
1029 };
1030
1031 #define MAX_TX_AGG_COUNT                  16
1032 struct ieee80211_drv_agg_txb {
1033         u8 nr_drv_agg_frames;
1034         struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
1035 } __packed;
1036
1037 #define MAX_SUBFRAME_COUNT                64
1038 struct ieee80211_rxb {
1039         u8 nr_subframes;
1040         struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
1041         u8 dst[ETH_ALEN];
1042         u8 src[ETH_ALEN];
1043 } __packed;
1044
1045 typedef union _frameqos {
1046         u16 shortdata;
1047         u8  chardata[2];
1048         struct {
1049                 u16 tid:4;
1050                 u16 eosp:1;
1051                 u16 ack_policy:2;
1052                 u16 reserved:1;
1053                 u16 txop:8;
1054         } field;
1055 } frameqos, *pframeqos;
1056
1057 /* SWEEP TABLE ENTRIES NUMBER*/
1058 #define MAX_SWEEP_TAB_ENTRIES             42
1059 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
1060 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
1061  * only use 8, and then use extended rates for the remaining supported
1062  * rates.  Other APs, however, stick all of their supported rates on the
1063  * main rates information element...
1064  */
1065 #define MAX_RATES_LENGTH                  ((u8)12)
1066 #define MAX_RATES_EX_LENGTH               ((u8)16)
1067 #define MAX_NETWORK_COUNT                  128
1068
1069 #define MAX_CHANNEL_NUMBER                 161
1070 #define IEEE80211_SOFTMAC_SCAN_TIME        100
1071 //(HZ / 2)
1072 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1073
1074 #define CRC_LENGTH                 4U
1075
1076 #define MAX_WPA_IE_LEN 64
1077
1078 #define NETWORK_EMPTY_ESSID (1<<0)
1079 #define NETWORK_HAS_OFDM    (1<<1)
1080 #define NETWORK_HAS_CCK     (1<<2)
1081
1082 /* QoS structure */
1083 #define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
1084 #define NETWORK_HAS_QOS_INFORMATION     (1<<4)
1085 #define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
1086                                          NETWORK_HAS_QOS_INFORMATION)
1087 /* 802.11h */
1088 #define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
1089 #define NETWORK_HAS_CSA                 (1<<6)
1090 #define NETWORK_HAS_QUIET               (1<<7)
1091 #define NETWORK_HAS_IBSS_DFS            (1<<8)
1092 #define NETWORK_HAS_TPC_REPORT          (1<<9)
1093
1094 #define NETWORK_HAS_ERP_VALUE           (1<<10)
1095
1096 #define QOS_QUEUE_NUM                   4
1097 #define QOS_OUI_LEN                     3
1098 #define QOS_OUI_TYPE                    2
1099 #define QOS_ELEMENT_ID                  221
1100 #define QOS_OUI_INFO_SUB_TYPE           0
1101 #define QOS_OUI_PARAM_SUB_TYPE          1
1102 #define QOS_VERSION_1                   1
1103 #define QOS_AIFSN_MIN_VALUE             2
1104 struct ieee80211_qos_information_element {
1105         u8 elementID;
1106         u8 length;
1107         u8 qui[QOS_OUI_LEN];
1108         u8 qui_type;
1109         u8 qui_subtype;
1110         u8 version;
1111         u8 ac_info;
1112 } __packed;
1113
1114 struct ieee80211_qos_ac_parameter {
1115         u8 aci_aifsn;
1116         u8 ecw_min_max;
1117         __le16 tx_op_limit;
1118 } __packed;
1119
1120 struct ieee80211_qos_parameter_info {
1121         struct ieee80211_qos_information_element info_element;
1122         u8 reserved;
1123         struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
1124 } __packed;
1125
1126 struct ieee80211_qos_parameters {
1127         __le16 cw_min[QOS_QUEUE_NUM];
1128         __le16 cw_max[QOS_QUEUE_NUM];
1129         u8 aifs[QOS_QUEUE_NUM];
1130         u8 flag[QOS_QUEUE_NUM];
1131         __le16 tx_op_limit[QOS_QUEUE_NUM];
1132 } __packed;
1133
1134 struct ieee80211_qos_data {
1135         struct ieee80211_qos_parameters parameters;
1136         int active;
1137         int supported;
1138         u8 param_count;
1139         u8 old_param_count;
1140 };
1141
1142 struct ieee80211_tim_parameters {
1143         u8 tim_count;
1144         u8 tim_period;
1145 } __packed;
1146
1147 //#else
1148 struct ieee80211_wmm_ts_info {
1149         u8 ac_dir_tid;
1150         u8 ac_up_psb;
1151         u8 reserved;
1152 } __packed;
1153
1154 struct ieee80211_wmm_tspec_elem {
1155         struct ieee80211_wmm_ts_info ts_info;
1156         u16 norm_msdu_size;
1157         u16 max_msdu_size;
1158         u32 min_serv_inter;
1159         u32 max_serv_inter;
1160         u32 inact_inter;
1161         u32 suspen_inter;
1162         u32 serv_start_time;
1163         u32 min_data_rate;
1164         u32 mean_data_rate;
1165         u32 peak_data_rate;
1166         u32 max_burst_size;
1167         u32 delay_bound;
1168         u32 min_phy_rate;
1169         u16 surp_band_allow;
1170         u16 medium_time;
1171 } __packed;
1172 enum eap_type {
1173         EAP_PACKET = 0,
1174         EAPOL_START,
1175         EAPOL_LOGOFF,
1176         EAPOL_KEY,
1177         EAPOL_ENCAP_ASF_ALERT
1178 };
1179
1180 static const char *eap_types[] = {
1181         [EAP_PACKET]            = "EAP-Packet",
1182         [EAPOL_START]           = "EAPOL-Start",
1183         [EAPOL_LOGOFF]          = "EAPOL-Logoff",
1184         [EAPOL_KEY]             = "EAPOL-Key",
1185         [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
1186 };
1187
1188 static inline const char *eap_get_type(int type)
1189 {
1190         return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
1191 }
1192 //added by amy for reorder
1193 static inline u8 Frame_QoSTID(u8 *buf)
1194 {
1195         struct rtl_80211_hdr_3addr *hdr;
1196         u16 fc;
1197         hdr = (struct rtl_80211_hdr_3addr *)buf;
1198         fc = le16_to_cpu(hdr->frame_ctl);
1199         return (u8)((frameqos *)(buf + (((fc & IEEE80211_FCTL_TODS) && (fc & IEEE80211_FCTL_FROMDS)) ? 30 : 24)))->field.tid;
1200 }
1201
1202 //added by amy for reorder
1203
1204 struct eapol {
1205         u8 snap[6];
1206         u16 ethertype;
1207         u8 version;
1208         u8 type;
1209         u16 length;
1210 } __packed;
1211
1212 struct ieee80211_softmac_stats {
1213         unsigned int rx_ass_ok;
1214         unsigned int rx_ass_err;
1215         unsigned int rx_probe_rq;
1216         unsigned int tx_probe_rs;
1217         unsigned int tx_beacons;
1218         unsigned int rx_auth_rq;
1219         unsigned int rx_auth_rs_ok;
1220         unsigned int rx_auth_rs_err;
1221         unsigned int tx_auth_rq;
1222         unsigned int no_auth_rs;
1223         unsigned int no_ass_rs;
1224         unsigned int tx_ass_rq;
1225         unsigned int rx_ass_rq;
1226         unsigned int tx_probe_rq;
1227         unsigned int reassoc;
1228         unsigned int swtxstop;
1229         unsigned int swtxawake;
1230         unsigned char CurrentShowTxate;
1231         unsigned char last_packet_rate;
1232         unsigned int txretrycount;
1233 };
1234
1235 #define BEACON_PROBE_SSID_ID_POSITION 12
1236
1237 struct ieee80211_info_element_hdr {
1238         u8 id;
1239         u8 len;
1240 } __packed;
1241
1242 /*
1243  * These are the data types that can make up management packets
1244  *
1245         u16 auth_algorithm;
1246         u16 auth_sequence;
1247         u16 beacon_interval;
1248         u16 capability;
1249         u8 current_ap[ETH_ALEN];
1250         u16 listen_interval;
1251         struct {
1252                 u16 association_id:14, reserved:2;
1253         } __packed;
1254         u32 time_stamp[2];
1255         u16 reason;
1256         u16 status;
1257 */
1258
1259 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1260 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1261
1262 enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
1263 #define MAX_SP_Len  (WMM_all_frame << 4)
1264 #define IEEE80211_QOS_TID 0x0f
1265 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1266
1267 #define IEEE80211_DTIM_MBCAST 4
1268 #define IEEE80211_DTIM_UCAST 2
1269 #define IEEE80211_DTIM_VALID 1
1270 #define IEEE80211_DTIM_INVALID 0
1271
1272 #define IEEE80211_PS_DISABLED 0
1273 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1274 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1275
1276 //added by David for QoS 2006/6/30
1277 //#define WMM_Hang_8187
1278 #ifdef WMM_Hang_8187
1279 #undef WMM_Hang_8187
1280 #endif
1281
1282 #define WME_AC_BK   0x00
1283 #define WME_AC_BE   0x01
1284 #define WME_AC_VI   0x02
1285 #define WME_AC_VO   0x03
1286 #define WME_ACI_MASK 0x03
1287 #define WME_AIFSN_MASK 0x03
1288 #define WME_AC_PRAM_LEN 16
1289
1290 #define MAX_RECEIVE_BUFFER_SIZE 9100
1291
1292 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1293 //#define UP2AC(up)     ((up<3) ? ((up==0)?1:0) : (up>>1))
1294 #define UP2AC(up) (                \
1295         ((up) < 1) ? WME_AC_BE : \
1296         ((up) < 3) ? WME_AC_BK : \
1297         ((up) < 4) ? WME_AC_BE : \
1298         ((up) < 6) ? WME_AC_VI : \
1299         WME_AC_VO)
1300 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1301 #define AC2UP(_ac)      (       \
1302         ((_ac) == WME_AC_VO) ? 6 : \
1303         ((_ac) == WME_AC_VI) ? 5 : \
1304         ((_ac) == WME_AC_BK) ? 1 : \
1305         0)
1306
1307 #define ETHER_ADDR_LEN          6       /* length of an Ethernet address */
1308 #define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
1309
1310 struct  ether_header {
1311         u8 ether_dhost[ETHER_ADDR_LEN];
1312         u8 ether_shost[ETHER_ADDR_LEN];
1313         u16 ether_type;
1314 } __packed;
1315
1316 #ifndef ETHERTYPE_PAE
1317 #define ETHERTYPE_PAE   0x888e          /* EAPOL PAE/802.1x */
1318 #endif
1319 #ifndef ETHERTYPE_IP
1320 #define ETHERTYPE_IP    0x0800          /* IP protocol */
1321 #endif
1322
1323 typedef enum _erp_t {
1324         ERP_NonERPpresent       = 0x01,
1325         ERP_UseProtection       = 0x02,
1326         ERP_BarkerPreambleMode = 0x04,
1327 } erp_t;
1328
1329
1330 struct ieee80211_network {
1331         /* These entries are used to identify a unique network */
1332         u8 bssid[ETH_ALEN];
1333         u8 channel;
1334         /* Ensure null-terminated for any debug msgs */
1335         u8 ssid[IW_ESSID_MAX_SIZE + 1];
1336         u8 ssid_len;
1337         struct ieee80211_qos_data qos_data;
1338
1339         //added by amy for LEAP
1340         bool    bWithAironetIE;
1341         bool    bCkipSupported;
1342         bool    bCcxRmEnable;
1343         u16     CcxRmState[2];
1344         // CCXv4 S59, MBSSID.
1345         bool    bMBssidValid;
1346         u8      MBssidMask;
1347         u8      MBssid[6];
1348         // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1349         bool    bWithCcxVerNum;
1350         u8      BssCcxVerNumber;
1351         /* These are network statistics */
1352         struct ieee80211_rx_stats stats;
1353         u16 capability;
1354         u8  rates[MAX_RATES_LENGTH];
1355         u8  rates_len;
1356         u8  rates_ex[MAX_RATES_EX_LENGTH];
1357         u8  rates_ex_len;
1358         unsigned long last_scanned;
1359         u8  mode;
1360         u32 flags;
1361         u32 last_associate;
1362         u32 time_stamp[2];
1363         u16 beacon_interval;
1364         u16 listen_interval;
1365         u16 atim_window;
1366         u8  erp_value;
1367         u8  wpa_ie[MAX_WPA_IE_LEN];
1368         size_t wpa_ie_len;
1369         u8  rsn_ie[MAX_WPA_IE_LEN];
1370         size_t rsn_ie_len;
1371
1372         struct ieee80211_tim_parameters tim;
1373         u8  dtim_period;
1374         u8  dtim_data;
1375         u32 last_dtim_sta_time[2];
1376
1377         //appeded for QoS
1378         u8 wmm_info;
1379         struct ieee80211_wmm_ac_param wmm_param[4];
1380         u8 QoS_Enable;
1381 #ifdef THOMAS_TURBO
1382         u8 Turbo_Enable;//enable turbo mode, added by thomas
1383 #endif
1384         u16 CountryIeLen;
1385         u8 CountryIeBuf[MAX_IE_LEN];
1386         // HT Related, by amy, 2008.04.29
1387         BSS_HT  bssht;
1388         // Add to handle broadcom AP management frame CCK rate.
1389         bool broadcom_cap_exist;
1390         bool ralink_cap_exist;
1391         bool atheros_cap_exist;
1392         bool cisco_cap_exist;
1393         bool unknown_cap_exist;
1394 //      u8      berp_info;
1395         bool    berp_info_valid;
1396         bool buseprotection;
1397         //put at the end of the structure.
1398         struct list_head list;
1399 };
1400
1401 enum ieee80211_state {
1402
1403         /* the card is not linked at all */
1404         IEEE80211_NOLINK = 0,
1405
1406         /* IEEE80211_ASSOCIATING* are for BSS client mode
1407          * the driver shall not perform RX filtering unless
1408          * the state is LINKED.
1409          * The driver shall just check for the state LINKED and
1410          * defaults to NOLINK for ALL the other states (including
1411          * LINKED_SCANNING)
1412          */
1413
1414         /* the association procedure will start (wq scheduling)*/
1415         IEEE80211_ASSOCIATING,
1416         IEEE80211_ASSOCIATING_RETRY,
1417
1418         /* the association procedure is sending AUTH request*/
1419         IEEE80211_ASSOCIATING_AUTHENTICATING,
1420
1421         /* the association procedure has successfully authentcated
1422          * and is sending association request
1423          */
1424         IEEE80211_ASSOCIATING_AUTHENTICATED,
1425
1426         /* the link is ok. the card associated to a BSS or linked
1427          * to a ibss cell or acting as an AP and creating the bss
1428          */
1429         IEEE80211_LINKED,
1430
1431         /* same as LINKED, but the driver shall apply RX filter
1432          * rules as we are in NO_LINK mode. As the card is still
1433          * logically linked, but it is doing a syncro site survey
1434          * then it will be back to LINKED state.
1435          */
1436         IEEE80211_LINKED_SCANNING,
1437
1438 };
1439
1440 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1441 #define DEFAULT_FTS 2346
1442
1443 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1444 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1445 #define CFG_IEEE80211_RTS (1<<2)
1446
1447 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1448 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1449 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1450                                   IEEE80211_24GHZ_MIN_CHANNEL + 1)
1451
1452 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1453 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1454 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1455                                   IEEE80211_52GHZ_MIN_CHANNEL + 1)
1456
1457
1458
1459 struct tx_pending {
1460         int frag;
1461         struct ieee80211_txb *txb;
1462 };
1463
1464 typedef struct _bandwidth_autoswitch {
1465         long threshold_20Mhzto40Mhz;
1466         long    threshold_40Mhzto20Mhz;
1467         bool bforced_tx20Mhz;
1468         bool bautoswitch_enable;
1469 } bandwidth_autoswitch, *pbandwidth_autoswitch;
1470
1471
1472 //added by amy for order
1473
1474 #define REORDER_WIN_SIZE        128
1475 #define REORDER_ENTRY_NUM       128
1476 typedef struct _RX_REORDER_ENTRY {
1477         struct list_head        List;
1478         u16                     SeqNum;
1479         struct ieee80211_rxb *prxb;
1480 } RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
1481 //added by amy for order
1482 typedef enum _Fsync_State {
1483         Default_Fsync,
1484         HW_Fsync,
1485         SW_Fsync
1486 } Fsync_State;
1487
1488 // Power save mode configured.
1489 typedef enum _RT_PS_MODE {
1490         eActive,        // Active/Continuous access.
1491         eMaxPs,         // Max power save mode.
1492         eFastPs         // Fast power save mode.
1493 } RT_PS_MODE;
1494
1495 typedef enum _IPS_CALLBACK_FUNCION {
1496         IPS_CALLBACK_NONE = 0,
1497         IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
1498         IPS_CALLBACK_JOIN_REQUEST = 2,
1499 } IPS_CALLBACK_FUNCION;
1500
1501 typedef enum _RT_JOIN_ACTION {
1502         RT_JOIN_INFRA   = 1,
1503         RT_JOIN_IBSS  = 2,
1504         RT_START_IBSS = 3,
1505         RT_NO_ACTION  = 4,
1506 } RT_JOIN_ACTION;
1507
1508 typedef struct _IbssParms {
1509         u16   atimWin;
1510 } IbssParms, *PIbssParms;
1511 #define MAX_NUM_RATES   264 // Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko.
1512
1513 // RF state.
1514 typedef enum _RT_RF_POWER_STATE {
1515         eRfOn,
1516         eRfSleep,
1517         eRfOff
1518 } RT_RF_POWER_STATE;
1519
1520 typedef struct _RT_POWER_SAVE_CONTROL {
1521
1522         //
1523         // Inactive Power Save(IPS) : Disable RF when disconnected
1524         //
1525         bool                            bInactivePs;
1526         bool                            bIPSModeBackup;
1527         bool                            bSwRfProcessing;
1528         RT_RF_POWER_STATE       eInactivePowerState;
1529         struct work_struct      InactivePsWorkItem;
1530         struct timer_list       InactivePsTimer;
1531
1532         // Return point for join action
1533         IPS_CALLBACK_FUNCION    ReturnPoint;
1534
1535         // Recored Parameters for rescheduled JoinRequest
1536         bool                            bTmpBssDesc;
1537         RT_JOIN_ACTION          tmpJoinAction;
1538         struct ieee80211_network tmpBssDesc;
1539
1540         // Recored Parameters for rescheduled MgntLinkRequest
1541         bool                            bTmpScanOnly;
1542         bool                            bTmpActiveScan;
1543         bool                            bTmpFilterHiddenAP;
1544         bool                            bTmpUpdateParms;
1545         u8                                      tmpSsidBuf[33];
1546         struct octet_string                     tmpSsid2Scan;
1547         bool                            bTmpSsid2Scan;
1548         u8                                      tmpNetworkType;
1549         u8                                      tmpChannelNumber;
1550         u16                                     tmpBcnPeriod;
1551         u8                                      tmpDtimPeriod;
1552         u16                                     tmpmCap;
1553         struct octet_string                     tmpSuppRateSet;
1554         u8                                      tmpSuppRateBuf[MAX_NUM_RATES];
1555         bool                            bTmpSuppRate;
1556         IbssParms                               tmpIbpm;
1557         bool                            bTmpIbpm;
1558
1559         //
1560         // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1561         //
1562         bool                            bLeisurePs;
1563
1564 } RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
1565
1566 typedef u32 RT_RF_CHANGE_SOURCE;
1567 #define RF_CHANGE_BY_SW         BIT(31)
1568 #define RF_CHANGE_BY_HW         BIT(30)
1569 #define RF_CHANGE_BY_PS         BIT(29)
1570 #define RF_CHANGE_BY_IPS        BIT(28)
1571 #define RF_CHANGE_BY_INIT       0       // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1572
1573 typedef enum {
1574         COUNTRY_CODE_FCC = 0,
1575         COUNTRY_CODE_IC = 1,
1576         COUNTRY_CODE_ETSI = 2,
1577         COUNTRY_CODE_SPAIN = 3,
1578         COUNTRY_CODE_FRANCE = 4,
1579         COUNTRY_CODE_MKK = 5,
1580         COUNTRY_CODE_MKK1 = 6,
1581         COUNTRY_CODE_ISRAEL = 7,
1582         COUNTRY_CODE_TELEC,
1583         COUNTRY_CODE_MIC,
1584         COUNTRY_CODE_GLOBAL_DOMAIN
1585 } country_code_type_t;
1586
1587 #define RT_MAX_LD_SLOT_NUM      10
1588 typedef struct _RT_LINK_DETECT_T {
1589
1590         u32                             NumRecvBcnInPeriod;
1591         u32                             NumRecvDataInPeriod;
1592
1593         u32                             RxBcnNum[RT_MAX_LD_SLOT_NUM];   // number of Rx beacon / CheckForHang_period  to determine link status
1594         u32                             RxDataNum[RT_MAX_LD_SLOT_NUM];  // number of Rx data / CheckForHang_period  to determine link status
1595         u16                             SlotNum;        // number of CheckForHang period to determine link status
1596         u16                             SlotIndex;
1597
1598         u32                             NumTxOkInPeriod;
1599         u32                             NumRxOkInPeriod;
1600         bool                            bBusyTraffic;
1601 } RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
1602
1603
1604 struct ieee80211_device {
1605         struct net_device *dev;
1606         struct ieee80211_security sec;
1607
1608         //hw security related
1609 //      u8 hwsec_support; //support?
1610         u8 hwsec_active;  //hw security active.
1611         bool is_silent_reset;
1612         bool ieee_up;
1613         //added by amy
1614         bool bSupportRemoteWakeUp;
1615         RT_PS_MODE      dot11PowerSaveMode; // Power save mode configured.
1616         bool actscanning;
1617         bool beinretry;
1618         RT_RF_POWER_STATE               eRFPowerState;
1619         RT_RF_CHANGE_SOURCE     RfOffReason;
1620         bool is_set_key;
1621         //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1622
1623         //11n HT below
1624         PRT_HIGH_THROUGHPUT     pHTInfo;
1625         //struct timer_list             SwBwTimer;
1626 //      spinlock_t chnlop_spinlock;
1627         spinlock_t bw_spinlock;
1628
1629         spinlock_t reorder_spinlock;
1630         // for HT operation rate set.  we use this one for HT data rate to separate different descriptors
1631         //the way fill this is the same as in the IE
1632         u8      Regdot11HTOperationalRateSet[16];               //use RATR format
1633         u8      dot11HTOperationalRateSet[16];          //use RATR format
1634         u8      RegHTSuppRateSet[16];
1635         u8                              HTCurrentOperaRate;
1636         u8                              HTHighestOperaRate;
1637         //wb added for rate operation mode to firmware
1638         u8      bTxDisableRateFallBack;
1639         u8      bTxUseDriverAssingedRate;
1640         atomic_t        atm_chnlop;
1641         atomic_t        atm_swbw;
1642 //      u8      HTHighestOperaRate;
1643 //      u8      HTCurrentOperaRate;
1644
1645         // 802.11e and WMM Traffic Stream Info (TX)
1646         struct list_head                Tx_TS_Admit_List;
1647         struct list_head                Tx_TS_Pending_List;
1648         struct list_head                Tx_TS_Unused_List;
1649         struct tx_ts_record             TxTsRecord[TOTAL_TS_NUM];
1650         // 802.11e and WMM Traffic Stream Info (RX)
1651         struct list_head                Rx_TS_Admit_List;
1652         struct list_head                Rx_TS_Pending_List;
1653         struct list_head                Rx_TS_Unused_List;
1654         struct rx_ts_record             RxTsRecord[TOTAL_TS_NUM];
1655 //#ifdef TO_DO_LIST
1656         RX_REORDER_ENTRY        RxReorderEntry[128];
1657         struct list_head                RxReorder_Unused_List;
1658 //#endif
1659         // Qos related. Added by Annie, 2005-11-01.
1660 //      PSTA_QOS                        pStaQos;
1661         u8                              ForcedPriority;         // Force per-packet priority 1~7. (default: 0, not to force it.)
1662
1663
1664         /* Bookkeeping structures */
1665         struct net_device_stats stats;
1666         struct ieee80211_stats ieee_stats;
1667         struct ieee80211_softmac_stats softmac_stats;
1668
1669         /* Probe / Beacon management */
1670         struct list_head network_free_list;
1671         struct list_head network_list;
1672         struct ieee80211_network *networks;
1673         int scans;
1674         int scan_age;
1675
1676         int iw_mode; /* operating mode (IW_MODE_*) */
1677         struct iw_spy_data spy_data;
1678
1679         spinlock_t lock;
1680         spinlock_t wpax_suitlist_lock;
1681
1682         int tx_headroom; /* Set to size of any additional room needed at front
1683                           * of allocated Tx SKBs
1684                           */
1685         u32 config;
1686
1687         /* WEP and other encryption related settings at the device level */
1688         int open_wep; /* Set to 1 to allow unencrypted frames */
1689         int auth_mode;
1690         int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
1691                                  * WEP key changes
1692                                  */
1693
1694         /* If the host performs {en,de}cryption, then set to 1 */
1695         int host_encrypt;
1696         int host_encrypt_msdu;
1697         int host_decrypt;
1698         /* host performs multicast decryption */
1699         int host_mc_decrypt;
1700
1701         /* host should strip IV and ICV from protected frames */
1702         /* meaningful only when hardware decryption is being used */
1703         int host_strip_iv_icv;
1704
1705         int host_open_frag;
1706         int host_build_iv;
1707         int ieee802_1x; /* is IEEE 802.1X used */
1708
1709         /* WPA data */
1710         bool bHalfWirelessN24GMode;
1711         int wpa_enabled;
1712         int drop_unencrypted;
1713         int tkip_countermeasures;
1714         int privacy_invoked;
1715         size_t wpa_ie_len;
1716         u8 *wpa_ie;
1717         u8 ap_mac_addr[6];
1718         u16 pairwise_key_type;
1719         u16 group_key_type;
1720         struct list_head crypt_deinit_list;
1721         struct ieee80211_crypt_data *crypt[WEP_KEYS];
1722         int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
1723         struct timer_list crypt_deinit_timer;
1724         int crypt_quiesced;
1725
1726         int bcrx_sta_key; /* use individual keys to override default keys even
1727                            * with RX of broad/multicast frames
1728                            */
1729
1730         /* Fragmentation structures */
1731         // each streaming contain a entry
1732         struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
1733         unsigned int frag_next_idx[17];
1734         u16 fts; /* Fragmentation Threshold */
1735 #define DEFAULT_RTS_THRESHOLD 2346U
1736 #define MIN_RTS_THRESHOLD 1
1737 #define MAX_RTS_THRESHOLD 2346U
1738         u16 rts; /* RTS threshold */
1739
1740         /* Association info */
1741         u8 bssid[ETH_ALEN];
1742
1743         /* This stores infos for the current network.
1744          * Either the network we are associated in INFRASTRUCTURE
1745          * or the network that we are creating in MASTER mode.
1746          * ad-hoc is a mixture ;-).
1747          * Note that in infrastructure mode, even when not associated,
1748          * fields bssid and essid may be valid (if wpa_set and essid_set
1749          * are true) as thy carry the value set by the user via iwconfig
1750          */
1751         struct ieee80211_network current_network;
1752
1753         enum ieee80211_state state;
1754
1755         int short_slot;
1756         int reg_mode;
1757         int mode;       /* A, B, G */
1758         int modulation; /* CCK, OFDM */
1759         int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
1760         int abg_true;   /* ABG flag              */
1761
1762         /* used for forcing the ibss workqueue to terminate
1763          * without wait for the syncro scan to terminate
1764          */
1765         short sync_scan_hurryup;
1766
1767         int perfect_rssi;
1768         int worst_rssi;
1769
1770         u16 prev_seq_ctl;       /* used to drop duplicate frames */
1771
1772         /* map of allowed channels. 0 is dummy */
1773         // FIXME: remember to default to a basic channel plan depending of the PHY type
1774         void *pDot11dInfo;
1775         bool bGlobalDomain;
1776         int rate;       /* current rate */
1777         int basic_rate;
1778         //FIXME: pleace callback, see if redundant with softmac_features
1779         short active_scan;
1780
1781         /* this contains flags for selectively enable softmac support */
1782         u16 softmac_features;
1783
1784         /* if the sequence control field is not filled by HW */
1785         u16 seq_ctrl[5];
1786
1787         /* association procedure transaction sequence number */
1788         u16 associate_seq;
1789
1790         /* AID for RTXed association responses */
1791         u16 assoc_id;
1792
1793         /* power save mode related*/
1794         short ps;
1795         short sta_sleep;
1796         int ps_timeout;
1797         int ps_period;
1798         struct tasklet_struct ps_task;
1799         u32 ps_th;
1800         u32 ps_tl;
1801
1802         short raw_tx;
1803         /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1804         short queue_stop;
1805         short scanning;
1806         short proto_started;
1807
1808         struct mutex wx_mutex;
1809         struct mutex scan_mutex;
1810
1811         spinlock_t mgmt_tx_lock;
1812         spinlock_t beacon_lock;
1813
1814         short beacon_txing;
1815
1816         short wap_set;
1817         short ssid_set;
1818
1819         u8  wpax_type_set;    //{added by David, 2006.9.28}
1820         u32 wpax_type_notify; //{added by David, 2006.9.26}
1821
1822         /* QoS related flag */
1823         s8  init_wmmparam_flag;
1824         /* set on initialization */
1825         u8  qos_support;
1826
1827         /* for discarding duplicated packets in IBSS */
1828         struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
1829
1830         /* for discarding duplicated packets in BSS */
1831         u16 last_rxseq_num[17]; /* rx seq previous per-tid */
1832         u16 last_rxfrag_num[17];/* tx frag previous per-tid */
1833         unsigned long last_packet_time[17];
1834
1835         /* for PS mode */
1836         unsigned long last_rx_ps_time;
1837
1838         /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
1839         struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
1840         int mgmt_queue_head;
1841         int mgmt_queue_tail;
1842 //{ added for rtl819x
1843 #define IEEE80211_QUEUE_LIMIT 128
1844         u8 AsocRetryCount;
1845         unsigned int hw_header;
1846         struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
1847         struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
1848         struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
1849         u32     sta_edca_param[4];
1850         bool aggregation;
1851         // Enable/Disable Rx immediate BA capability.
1852         bool enable_rx_imm_BA;
1853         bool bibsscoordinator;
1854
1855         //+by amy for DM ,080515
1856         //Dynamic Tx power for near/far range enable/Disable  , by amy , 2008-05-15
1857         bool    bdynamic_txpower_enable;
1858
1859         bool bCTSToSelfEnable;
1860         u8      CTSToSelfTH;
1861
1862         u32     fsync_time_interval;
1863         u32     fsync_rate_bitmap;
1864         u8      fsync_rssi_threshold;
1865         bool    bfsync_enable;
1866
1867         u8      fsync_multiple_timeinterval;            // FsyncMultipleTimeInterval * FsyncTimeInterval
1868         u32     fsync_firstdiff_ratethreshold;          // low threshold
1869         u32     fsync_seconddiff_ratethreshold;  // decrease threshold
1870         Fsync_State                     fsync_state;
1871         bool            bis_any_nonbepkts;
1872         //20Mhz 40Mhz AutoSwitch Threshold
1873         bandwidth_autoswitch bandwidth_auto_switch;
1874         //for txpower tracking
1875         bool FwRWRF;
1876
1877         //added by amy for AP roaming
1878         RT_LINK_DETECT_T        LinkDetectInfo;
1879         //added by amy for ps
1880         RT_POWER_SAVE_CONTROL   PowerSaveControl;
1881 //}
1882         /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1883         struct  tx_pending tx_pending;
1884
1885         /* used if IEEE_SOFTMAC_ASSOCIATE is set */
1886         struct timer_list associate_timer;
1887
1888         /* used if IEEE_SOFTMAC_BEACONS is set */
1889         struct timer_list beacon_timer;
1890         struct work_struct associate_complete_wq;
1891         struct work_struct associate_procedure_wq;
1892         struct delayed_work softmac_scan_wq;
1893         struct delayed_work associate_retry_wq;
1894          struct delayed_work start_ibss_wq;
1895         struct work_struct wx_sync_scan_wq;
1896         struct workqueue_struct *wq;
1897         // Qos related. Added by Annie, 2005-11-01.
1898         //STA_QOS  StaQos;
1899
1900         //u32 STA_EDCA_PARAM[4];
1901         //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
1902
1903         struct ieee80211_rxb *stats_IndicateArray[REORDER_WIN_SIZE];
1904
1905         /* Callback functions */
1906         void (*set_security)(struct net_device *dev,
1907                              struct ieee80211_security *sec);
1908
1909         /* Used to TX data frame by using txb structs.
1910          * this is not used if in the softmac_features
1911          * is set the flag IEEE_SOFTMAC_TX_QUEUE
1912          */
1913         int (*hard_start_xmit)(struct ieee80211_txb *txb,
1914                                struct net_device *dev);
1915
1916         int (*reset_port)(struct net_device *dev);
1917         int (*is_queue_full)(struct net_device *dev, int pri);
1918
1919         int (*handle_management)(struct net_device *dev,
1920                                   struct ieee80211_network *network, u16 type);
1921         int (*is_qos_active)(struct net_device *dev, struct sk_buff *skb);
1922
1923         /* Softmac-generated frames (management) are TXed via this
1924          * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
1925          * not set. As some cards may have different HW queues that
1926          * one might want to use for data and management frames
1927          * the option to have two callbacks might be useful.
1928          * This function can't sleep.
1929          */
1930         int (*softmac_hard_start_xmit)(struct sk_buff *skb,
1931                                struct net_device *dev);
1932
1933         /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
1934          * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
1935          * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
1936          * then also management frames are sent via this callback.
1937          * This function can't sleep.
1938          */
1939         void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
1940                                struct net_device *dev, int rate);
1941
1942         /* stops the HW queue for DATA frames. Useful to avoid
1943          * waste time to TX data frame when we are reassociating
1944          * This function can sleep.
1945          */
1946         void (*data_hard_stop)(struct net_device *dev);
1947
1948         /* OK this is complementar to data_poll_hard_stop */
1949         void (*data_hard_resume)(struct net_device *dev);
1950
1951         /* ask to the driver to retune the radio .
1952          * This function can sleep. the driver should ensure
1953          * the radio has been switched before return.
1954          */
1955         void (*set_chan)(struct net_device *dev, short ch);
1956
1957         /* These are not used if the ieee stack takes care of
1958          * scanning (IEEE_SOFTMAC_SCAN feature set).
1959          * In this case only the set_chan is used.
1960          *
1961          * The syncro version is similar to the start_scan but
1962          * does not return until all channels has been scanned.
1963          * this is called in user context and should sleep,
1964          * it is called in a work_queue when switching to ad-hoc mode
1965          * or in behalf of iwlist scan when the card is associated
1966          * and root user ask for a scan.
1967          * the function stop_scan should stop both the syncro and
1968          * background scanning and can sleep.
1969          * The function start_scan should initiate the background
1970          * scanning and can't sleep.
1971          */
1972         void (*scan_syncro)(struct net_device *dev);
1973         void (*start_scan)(struct net_device *dev);
1974         void (*stop_scan)(struct net_device *dev);
1975
1976         /* indicate the driver that the link state is changed
1977          * for example it may indicate the card is associated now.
1978          * Driver might be interested in this to apply RX filter
1979          * rules or simply light the LINK led
1980          */
1981         void (*link_change)(struct net_device *dev);
1982
1983         /* these two function indicates to the HW when to start
1984          * and stop to send beacons. This is used when the
1985          * IEEE_SOFTMAC_BEACONS is not set. For now the
1986          * stop_send_bacons is NOT guaranteed to be called only
1987          * after start_send_beacons.
1988          */
1989         void (*start_send_beacons)(struct net_device *dev, u16 tx_rate);
1990         void (*stop_send_beacons)(struct net_device *dev);
1991
1992         /* power save mode related */
1993         void (*sta_wake_up)(struct net_device *dev);
1994         void (*ps_request_tx_ack)(struct net_device *dev);
1995         void (*enter_sleep_state)(struct net_device *dev, u32 th, u32 tl);
1996         short (*ps_is_queue_empty)(struct net_device *dev);
1997         int (*handle_beacon)(struct net_device *dev, struct ieee80211_beacon *beacon, struct ieee80211_network *network);
1998         int (*handle_assoc_response)(struct net_device *dev, struct ieee80211_assoc_response_frame *resp, struct ieee80211_network *network);
1999
2000
2001         /* check whether Tx hw resource available */
2002         short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
2003         //added by wb for HT related
2004 //      void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2005         void (*SetBWModeHandler)(struct net_device *dev, enum ht_channel_width Bandwidth, enum ht_extension_chan_offset Offset);
2006 //      void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2007         bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);
2008         void (*SetWirelessMode)(struct net_device *dev, u8 wireless_mode);
2009         bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device *dev);
2010         void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
2011
2012         /* This must be the last item so that it points to the data
2013          * allocated beyond this structure by alloc_ieee80211
2014          */
2015         u8 priv[0];
2016 };
2017
2018 #define IEEE_A            (1<<0)
2019 #define IEEE_B            (1<<1)
2020 #define IEEE_G            (1<<2)
2021 #define IEEE_N_24G                (1<<4)
2022 #define IEEE_N_5G                 (1<<5)
2023 #define IEEE_MODE_MASK    (IEEE_A | IEEE_B | IEEE_G)
2024
2025 /* Generate a 802.11 header */
2026
2027 /* Uses the channel change callback directly
2028  * instead of [start/stop] scan callbacks
2029  */
2030 #define IEEE_SOFTMAC_SCAN (1<<2)
2031
2032 /* Perform authentication and association handshake */
2033 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2034
2035 /* Generate probe requests */
2036 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2037
2038 /* Generate respones to probe requests */
2039 #define IEEE_SOFTMAC_PROBERS (1<<5)
2040
2041 /* The ieee802.11 stack will manages the netif queue
2042  * wake/stop for the driver, taking care of 802.11
2043  * fragmentation. See softmac.c for details.
2044  */
2045 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2046
2047 /* Uses only the softmac_data_hard_start_xmit
2048  * even for TX management frames.
2049  */
2050 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2051
2052 /* Generate beacons.  The stack will enqueue beacons
2053  * to the card
2054  */
2055 #define IEEE_SOFTMAC_BEACONS (1<<6)
2056
2057 static inline void *ieee80211_priv(struct net_device *dev)
2058 {
2059         return ((struct ieee80211_device *)netdev_priv(dev))->priv;
2060 }
2061
2062 static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
2063 {
2064         /* Single white space is for Linksys APs */
2065         if (essid_len == 1 && essid[0] == ' ')
2066                 return 1;
2067
2068         /* Otherwise, if the entire essid is 0, we assume it is hidden */
2069         while (essid_len) {
2070                 essid_len--;
2071                 if (essid[essid_len] != '\0')
2072                         return 0;
2073         }
2074
2075         return 1;
2076 }
2077
2078 static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
2079 {
2080         /*
2081          * It is possible for both access points and our device to support
2082          * combinations of modes, so as long as there is one valid combination
2083          * of ap/device supported modes, then return success
2084          *
2085          */
2086         if ((mode & IEEE_A) &&
2087             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2088             (ieee->freq_band & IEEE80211_52GHZ_BAND))
2089                 return 1;
2090
2091         if ((mode & IEEE_G) &&
2092             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2093             (ieee->freq_band & IEEE80211_24GHZ_BAND))
2094                 return 1;
2095
2096         if ((mode & IEEE_B) &&
2097             (ieee->modulation & IEEE80211_CCK_MODULATION) &&
2098             (ieee->freq_band & IEEE80211_24GHZ_BAND))
2099                 return 1;
2100
2101         return 0;
2102 }
2103
2104 static inline int ieee80211_get_hdrlen(u16 fc)
2105 {
2106         int hdrlen = IEEE80211_3ADDR_LEN;
2107
2108         switch (WLAN_FC_GET_TYPE(fc)) {
2109         case IEEE80211_FTYPE_DATA:
2110                 if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
2111                         hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
2112                 if (IEEE80211_QOS_HAS_SEQ(fc))
2113                         hdrlen += 2; /* QOS ctrl*/
2114                 break;
2115         case IEEE80211_FTYPE_CTL:
2116                 switch (WLAN_FC_GET_STYPE(fc)) {
2117                 case IEEE80211_STYPE_CTS:
2118                 case IEEE80211_STYPE_ACK:
2119                         hdrlen = IEEE80211_1ADDR_LEN;
2120                         break;
2121                 default:
2122                         hdrlen = IEEE80211_2ADDR_LEN;
2123                         break;
2124                 }
2125                 break;
2126         }
2127
2128         return hdrlen;
2129 }
2130
2131 static inline u8 *ieee80211_get_payload(struct rtl_80211_hdr *hdr)
2132 {
2133         switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
2134         case IEEE80211_1ADDR_LEN:
2135                 return ((struct rtl_80211_hdr_1addr *)hdr)->payload;
2136         case IEEE80211_2ADDR_LEN:
2137                 return ((struct rtl_80211_hdr_2addr *)hdr)->payload;
2138         case IEEE80211_3ADDR_LEN:
2139                 return ((struct rtl_80211_hdr_3addr *)hdr)->payload;
2140         case IEEE80211_4ADDR_LEN:
2141                 return ((struct rtl_80211_hdr_4addr *)hdr)->payload;
2142         }
2143         return NULL;
2144 }
2145
2146 static inline int ieee80211_is_ofdm_rate(u8 rate)
2147 {
2148         switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2149         case IEEE80211_OFDM_RATE_6MB:
2150         case IEEE80211_OFDM_RATE_9MB:
2151         case IEEE80211_OFDM_RATE_12MB:
2152         case IEEE80211_OFDM_RATE_18MB:
2153         case IEEE80211_OFDM_RATE_24MB:
2154         case IEEE80211_OFDM_RATE_36MB:
2155         case IEEE80211_OFDM_RATE_48MB:
2156         case IEEE80211_OFDM_RATE_54MB:
2157                 return 1;
2158         }
2159         return 0;
2160 }
2161
2162 static inline int ieee80211_is_cck_rate(u8 rate)
2163 {
2164         switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2165         case IEEE80211_CCK_RATE_1MB:
2166         case IEEE80211_CCK_RATE_2MB:
2167         case IEEE80211_CCK_RATE_5MB:
2168         case IEEE80211_CCK_RATE_11MB:
2169                 return 1;
2170         }
2171         return 0;
2172 }
2173
2174
2175 /* ieee80211.c */
2176 void free_ieee80211(struct net_device *dev);
2177 struct net_device *alloc_ieee80211(int sizeof_priv);
2178
2179 int ieee80211_set_encryption(struct ieee80211_device *ieee);
2180
2181 /* ieee80211_tx.c */
2182
2183 int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
2184                                struct sk_buff *frag, int hdr_len);
2185
2186 int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
2187 void ieee80211_txb_free(struct ieee80211_txb *txb);
2188
2189
2190 /* ieee80211_rx.c */
2191 int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
2192                  struct ieee80211_rx_stats *rx_stats);
2193 void ieee80211_rx_mgt(struct ieee80211_device *ieee,
2194                       struct rtl_80211_hdr_4addr *header,
2195                       struct ieee80211_rx_stats *stats);
2196
2197 /* ieee80211_wx.c */
2198 int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
2199                           struct iw_request_info *info,
2200                           union iwreq_data *wrqu, char *key);
2201 int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
2202                             struct iw_request_info *info,
2203                             union iwreq_data *wrqu, char *key);
2204 int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
2205                             struct iw_request_info *info,
2206                             union iwreq_data *wrqu, char *key);
2207 int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
2208                                 struct iw_request_info *info,
2209                                 union iwreq_data *wrqu, char *extra);
2210 int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
2211                                 struct iw_request_info *info,
2212                                 union iwreq_data *wrqu, char *extra);
2213 int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
2214                           struct iw_request_info *info,
2215                           struct iw_param *data, char *extra);
2216 int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
2217                           struct iw_request_info *info,
2218                           union iwreq_data *wrqu, char *extra);
2219 int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
2220
2221 /* ieee80211_softmac.c */
2222 short ieee80211_is_54g(const struct ieee80211_network *net);
2223 short ieee80211_is_shortslot(const struct ieee80211_network *net);
2224 int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
2225                                struct sk_buff *skb,
2226                                struct ieee80211_rx_stats *rx_stats,
2227                                u16 type, u16 stype);
2228 void ieee80211_softmac_new_net(struct ieee80211_device *ieee,
2229                                struct ieee80211_network *net);
2230
2231 void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta, u8 asRsn);
2232 void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
2233                             struct ieee80211_device *ieee);
2234
2235 void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2236 void notify_wx_assoc_event(struct ieee80211_device *ieee);
2237 void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
2238 void ieee80211_start_bss(struct ieee80211_device *ieee);
2239 void ieee80211_start_master_bss(struct ieee80211_device *ieee);
2240 void ieee80211_start_ibss(struct ieee80211_device *ieee);
2241 void ieee80211_softmac_init(struct ieee80211_device *ieee);
2242 void ieee80211_softmac_free(struct ieee80211_device *ieee);
2243 void ieee80211_associate_abort(struct ieee80211_device *ieee);
2244 void ieee80211_disassociate(struct ieee80211_device *ieee);
2245 void ieee80211_stop_scan(struct ieee80211_device *ieee);
2246 void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
2247 void ieee80211_check_all_nets(struct ieee80211_device *ieee);
2248 void ieee80211_start_protocol(struct ieee80211_device *ieee);
2249 void ieee80211_stop_protocol(struct ieee80211_device *ieee);
2250 void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
2251 void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
2252 void ieee80211_reset_queue(struct ieee80211_device *ieee);
2253 void ieee80211_wake_queue(struct ieee80211_device *ieee);
2254 void ieee80211_stop_queue(struct ieee80211_device *ieee);
2255 struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
2256 void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
2257 void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2258 int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee,
2259                                    struct iw_point *p);
2260 void notify_wx_assoc_event(struct ieee80211_device *ieee);
2261 void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
2262
2263 void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
2264
2265 /* ieee80211_crypt_ccmp&tkip&wep.c */
2266 void ieee80211_tkip_null(void);
2267
2268 int ieee80211_crypto_init(void);
2269 void ieee80211_crypto_deinit(void);
2270 int ieee80211_crypto_tkip_init(void);
2271 void ieee80211_crypto_tkip_exit(void);
2272 int ieee80211_crypto_ccmp_init(void);
2273 void ieee80211_crypto_ccmp_exit(void);
2274 int ieee80211_crypto_wep_init(void);
2275 void ieee80211_crypto_wep_exit(void);
2276
2277 /* ieee80211_softmac_wx.c */
2278
2279 int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
2280                          struct iw_request_info *info,
2281                          union iwreq_data *wrqu, char *ext);
2282
2283 int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
2284                          struct iw_request_info *info,
2285                          union iwreq_data *awrq,
2286                          char *extra);
2287
2288 int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
2289                            struct iw_request_info *a,
2290                            union iwreq_data *wrqu, char *b);
2291
2292 int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
2293                           struct iw_request_info *info,
2294                           union iwreq_data *wrqu, char *extra);
2295
2296 int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
2297                           struct iw_request_info *info,
2298                           union iwreq_data *wrqu, char *extra);
2299
2300 int ieee80211_wx_set_mode(struct ieee80211_device *ieee,
2301                           struct iw_request_info *a,
2302                           union iwreq_data *wrqu, char *b);
2303
2304 int ieee80211_wx_set_scan(struct ieee80211_device *ieee,
2305                           struct iw_request_info *a,
2306                           union iwreq_data *wrqu, char *b);
2307
2308 int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
2309                            struct iw_request_info *a,
2310                            union iwreq_data *wrqu, char *extra);
2311
2312 int ieee80211_wx_get_mode(struct ieee80211_device *ieee,
2313                           struct iw_request_info *a,
2314                           union iwreq_data *wrqu, char *b);
2315
2316 int ieee80211_wx_set_freq(struct ieee80211_device *ieee,
2317                           struct iw_request_info *a,
2318                           union iwreq_data *wrqu, char *b);
2319
2320 int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
2321                           struct iw_request_info *a,
2322                           union iwreq_data *wrqu, char *b);
2323
2324 /* ieee80211_module.c */
2325 int ieee80211_debug_init(void);
2326 void ieee80211_debug_exit(void);
2327
2328 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2329 void ieee80211_wx_sync_scan_wq(struct work_struct *work);
2330
2331
2332 int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
2333                            struct iw_request_info *info,
2334                                union iwreq_data *wrqu, char *extra);
2335
2336 int ieee80211_wx_get_name(struct ieee80211_device *ieee,
2337                           struct iw_request_info *info,
2338                           union iwreq_data *wrqu, char *extra);
2339
2340 int ieee80211_wx_set_power(struct ieee80211_device *ieee,
2341                            struct iw_request_info *info,
2342                            union iwreq_data *wrqu, char *extra);
2343
2344 int ieee80211_wx_get_power(struct ieee80211_device *ieee,
2345                            struct iw_request_info *info,
2346                            union iwreq_data *wrqu, char *extra);
2347
2348 int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
2349                          struct iw_request_info *info,
2350                          union iwreq_data *wrqu, char *extra);
2351
2352 int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
2353                          struct iw_request_info *info,
2354                          union iwreq_data *wrqu, char *extra);
2355 //HT
2356 #define MAX_RECEIVE_BUFFER_SIZE 9100  //
2357 void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
2358 void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
2359
2360 void HTSetConnectBwMode(struct ieee80211_device *ieee,
2361                         enum ht_channel_width Bandwidth, enum ht_extension_chan_offset Offset);
2362 void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
2363 void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap,
2364                                   u8 *len, u8 isEncrypt);
2365 void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo,
2366                             u8 *len, u8 isEncrypt);
2367 void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
2368                                 u8 *len);
2369 void HTOnAssocRsp(struct ieee80211_device *ieee);
2370 void HTInitializeHTInfo(struct ieee80211_device *ieee);
2371 void HTInitializeBssDesc(PBSS_HT pBssHT);
2372 void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee,
2373                                    struct ieee80211_network *pNetwork);
2374 void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee,
2375                                 struct ieee80211_network *pNetwork);
2376 u8 HTGetHighestMCSRate(struct ieee80211_device *ieee,
2377                        u8 *pMCSRateSet, u8 *pMCSFilter);
2378 extern u8 MCS_FILTER_ALL[];
2379 extern u16 MCS_DATA_RATE[2][2][77];
2380 u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
2381 //extern void HTSetConnectBwModeCallback(unsigned long data);
2382 void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
2383 bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
2384 u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
2385 u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
2386 u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
2387 //function in BAPROC.c
2388 int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb);
2389 int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb);
2390 int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb);
2391 void TsInitAddBA(struct ieee80211_device *ieee, struct tx_ts_record *pTS,
2392                  u8 Policy, u8 bOverwritePending);
2393 void TsInitDelBA(struct ieee80211_device *ieee,
2394                  struct ts_common_info *pTsCommonInfo, enum tr_select TxRxSelect);
2395 void BaSetupTimeOut(struct timer_list *t);
2396 void TxBaInactTimeout(struct timer_list *t);
2397 void RxBaInactTimeout(struct timer_list *t);
2398 void ResetBaEntry(PBA_RECORD pBA);
2399 //function in TS.c
2400 bool GetTs(
2401         struct ieee80211_device         *ieee,
2402         struct ts_common_info           **ppTS,
2403         u8                              *Addr,
2404         u8                              TID,
2405         enum tr_select                  TxRxSelect,  //Rx:1, Tx:0
2406         bool                            bAddNewTs
2407         );
2408 void TSInitialize(struct ieee80211_device *ieee);
2409 void TsStartAddBaProcess(struct ieee80211_device *ieee, struct tx_ts_record   *pTxTS);
2410 void RemovePeerTS(struct ieee80211_device *ieee, u8 *Addr);
2411 void RemoveAllTS(struct ieee80211_device *ieee);
2412 void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
2413
2414 extern const long ieee80211_wlan_frequencies[];
2415
2416 static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
2417 {
2418         ieee->scans++;
2419 }
2420
2421 static inline int ieee80211_get_scans(struct ieee80211_device *ieee)
2422 {
2423         return ieee->scans;
2424 }
2425
2426 static inline const char *escape_essid(const char *essid, u8 essid_len)
2427 {
2428         static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
2429
2430         if (ieee80211_is_empty_essid(essid, essid_len)) {
2431                 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
2432                 return escaped;
2433         }
2434
2435         snprintf(escaped, sizeof(escaped), "%*pEn", essid_len, essid);
2436         return escaped;
2437 }
2438
2439 /* For the function is more related to hardware setting, it's better to use the
2440  * ieee handler to refer to it.
2441  */
2442 short check_nic_enough_desc(struct net_device *dev, int queue_index);
2443 int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
2444 int ieee80211_parse_info_param(struct ieee80211_device *ieee,
2445                                struct ieee80211_info_element *info_element,
2446                                u16 length,
2447                                struct ieee80211_network *network,
2448                                struct ieee80211_rx_stats *stats);
2449
2450 void ieee80211_indicate_packets(struct ieee80211_device *ieee,
2451                                 struct ieee80211_rxb **prxbIndicateArray,
2452                                 u8 index);
2453 #define RT_ASOC_RETRY_LIMIT     5
2454 #endif /* IEEE80211_H */