drivers/staging/wilc1000/wilc_wlan_if.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
   4  * All rights reserved.
   5  */
   6
   7 #ifndef WILC_WLAN_IF_H
   8 #define WILC_WLAN_IF_H
   9
  10 #include <linux/netdevice.h>
  11
  12 /********************************************
  13  *
  14  *      Host Interface Defines
  15  *
  16  ********************************************/
  17
  18 #define HIF_SDIO                (0)
  19 #define HIF_SPI                 BIT(0)
  20
  21 /********************************************
  22  *
  23  *      Wlan Interface Defines
  24  *
  25  ********************************************/
  26
  27 struct sdio_cmd52 {
  28         u32 read_write:         1;
  29         u32 function:           3;
  30         u32 raw:                1;
  31         u32 address:            17;
  32         u32 data:               8;
  33 };
  34
  35 struct sdio_cmd53 {
  36         u32 read_write:         1;
  37         u32 function:           3;
  38         u32 block_mode:         1;
  39         u32 increment:          1;
  40         u32 address:            17;
  41         u32 count:              9;
  42         u8 *buffer;
  43         u32 block_size;
  44 };
  45
  46 #define MAC_STATUS_INIT                 -1
  47 #define MAC_STATUS_CONNECTED            1
  48 #define MAC_STATUS_DISCONNECTED         0
  49
  50 struct tx_complete_data {
  51         int size;
  52         void *buff;
  53         u8 *bssid;
  54         struct sk_buff *skb;
  55 };
  56
  57 typedef void (*wilc_tx_complete_func_t)(void *, int);
  58
  59 #define WILC_TX_ERR_NO_BUF      (-2)
  60
  61 /********************************************
  62  *
  63  *      Wlan Configuration ID
  64  *
  65  ********************************************/
  66 #define WILC_MULTICAST_TABLE_SIZE       8
  67 #define MAX_SSID_LEN            33
  68 #define MAX_RATES_SUPPORTED     12
  69
  70 enum bss_types {
  71         INFRASTRUCTURE          = 0,
  72         INDEPENDENT,
  73         AP,
  74 };
  75
  76 enum {
  77         B_ONLY_MODE             = 0,    /* 1, 2 M, otherwise 5, 11 M */
  78         G_ONLY_MODE,                    /* 6,12,24 otherwise 9,18,36,48,54 */
  79         G_MIXED_11B_1_MODE,             /* 1,2,5.5,11 otherwise all on */
  80         G_MIXED_11B_2_MODE,             /* 1,2,5,11,6,12,24 otherwise all on */
  81 };
  82
  83 enum {
  84         G_SHORT_PREAMBLE        = 0,    /* Short Preamble */
  85         G_LONG_PREAMBLE         = 1,    /* Long Preamble */
  86         G_AUTO_PREAMBLE         = 2,    /* Auto Preamble Selection */
  87 };
  88
  89 enum {
  90         PASSIVE_SCAN            = 0,
  91         ACTIVE_SCAN             = 1,
  92 };
  93
  94 enum {
  95         NO_POWERSAVE            = 0,
  96         MIN_FAST_PS             = 1,
  97         MAX_FAST_PS             = 2,
  98         MIN_PSPOLL_PS           = 3,
  99         MAX_PSPOLL_PS           = 4
 100 };
 101
 102 enum chip_ps_states {
 103         CHIP_WAKEDUP            = 0,
 104         CHIP_SLEEPING_AUTO      = 1,
 105         CHIP_SLEEPING_MANUAL    = 2
 106 };
 107
 108 enum bus_acquire {
 109         ACQUIRE_ONLY            = 0,
 110         ACQUIRE_AND_WAKEUP      = 1,
 111 };
 112
 113 enum bus_release {
 114         RELEASE_ONLY            = 0,
 115         RELEASE_ALLOW_SLEEP     = 1,
 116 };
 117
 118 enum {
 119         NO_SECURITY             = 0,
 120         WEP_40                  = 0x3,
 121         WEP_104                 = 0x7,
 122         WPA_AES                 = 0x29,
 123         WPA_TKIP                = 0x49,
 124         WPA_AES_TKIP            = 0x69, /* Aes or Tkip */
 125         WPA2_AES                = 0x31,
 126         WPA2_TKIP               = 0x51,
 127         WPA2_AES_TKIP           = 0x71, /* Aes or Tkip */
 128 };
 129
 130 enum authtype {
 131         OPEN_SYSTEM             = 1,
 132         SHARED_KEY              = 2,
 133         ANY                     = 3,
 134         IEEE8021                = 5
 135 };
 136
 137 enum site_survey {
 138         SITE_SURVEY_1CH         = 0,
 139         SITE_SURVEY_ALL_CH      = 1,
 140         SITE_SURVEY_OFF         = 2
 141 };
 142
 143 enum {
 144         NORMAL_ACK              = 0,
 145         NO_ACK,
 146 };
 147
 148 enum {
 149         REKEY_DISABLE           = 1,
 150         REKEY_TIME_BASE,
 151         REKEY_PKT_BASE,
 152         REKEY_TIME_PKT_BASE
 153 };
 154
 155 enum {
 156         FILTER_NO               = 0x00,
 157         FILTER_AP_ONLY          = 0x01,
 158         FILTER_STA_ONLY         = 0x02
 159 };
 160
 161 enum {
 162         AUTO_PROT               = 0,    /* Auto */
 163         NO_PROT,                        /* Do not use any protection */
 164         ERP_PROT,                       /* Protect all ERP frame exchanges */
 165         HT_PROT,                        /* Protect all HT frame exchanges  */
 166         GF_PROT,                        /* Protect all GF frame exchanges  */
 167 };
 168
 169 enum {
 170         G_SELF_CTS_PROT,
 171         G_RTS_CTS_PROT,
 172 };
 173
 174 enum {
 175         HT_MIXED_MODE           = 1,
 176         HT_ONLY_20MHZ_MODE,
 177         HT_ONLY_20_40MHZ_MODE,
 178 };
 179
 180 enum {
 181         NO_DETECT               = 0,
 182         DETECT_ONLY             = 1,
 183         DETECT_PROTECT          = 2,
 184         DETECT_PROTECT_REPORT   = 3,
 185 };
 186
 187 enum {
 188         RTS_CTS_NONHT_PROT      = 0,    /* RTS-CTS at non-HT rate */
 189         FIRST_FRAME_NONHT_PROT,         /* First frame at non-HT rate */
 190         LSIG_TXOP_PROT,                 /* LSIG TXOP Protection */
 191         FIRST_FRAME_MIXED_PROT,         /* First frame at Mixed format */
 192 };
 193
 194 enum {
 195         STATIC_MODE             = 1,
 196         DYNAMIC_MODE            = 2,
 197         MIMO_MODE               = 3,    /* power save disable */
 198 };
 199
 200 enum wid_type {
 201         WID_CHAR                = 0,
 202         WID_SHORT               = 1,
 203         WID_INT                 = 2,
 204         WID_STR                 = 3,
 205         WID_BIN_DATA            = 4,
 206         WID_BIN                 = 5,
 207         WID_IP                  = 6,
 208         WID_ADR                 = 7,
 209         WID_UNDEF               = 8,
 210         WID_TYPE_FORCE_32BIT    = 0xFFFFFFFF
 211 };
 212
 213 struct wid {
 214         u16 id;
 215         enum wid_type type;
 216         s32 size;
 217         s8 *val;
 218 };
 219
 220 enum {
 221         WID_NIL                         = 0xffff,
 222
 223         /*
 224          *  BSS Type
 225          *  -----------------------------------------------------------
 226          *  Configuration : Infrastructure   Independent   Access Point
 227          *  Values to set :         0               1            2
 228          *  -----------------------------------------------------------
 229          */
 230         WID_BSS_TYPE                    = 0x0000,
 231
 232         /*
 233          *  Transmit Rate
 234          *  -----------------------------------------------------------
 235          *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
 236          *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
 237          *  -----------------------------------------------------------
 238          */
 239         WID_CURRENT_TX_RATE             = 0x0001,
 240
 241         /*
 242          *  Channel
 243          *  -----------------------------------------------------------
 244          *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 245          *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 246          *  -----------------------------------------------------------
 247          */
 248         WID_CURRENT_CHANNEL             = 0x0002,
 249
 250         /*
 251          *  Preamble
 252          *  -----------------------------------------------------------
 253          *  Configuration :    short    long      Auto
 254          *  Values to set :       0       1         2
 255          *  -----------------------------------------------------------
 256          */
 257         WID_PREAMBLE                    = 0x0003,
 258
 259         /*
 260          * 11g operating mode (ignored if 11g not present)
 261          *  -----------------------------------------------------------
 262          *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
 263          *  Values to set :          1               2               3
 264          *  -----------------------------------------------------------
 265          */
 266         WID_11G_OPERATING_MODE          = 0x0004,
 267
 268         /*
 269          *  Mac status (response only)
 270          *  -----------------------------------------------------------
 271          *  Configuration :   disconnect  connect
 272          *  Values to get :          0       1
 273          *  -----------------------------------------------------------
 274          */
 275         WID_STATUS                      = 0x0005,
 276
 277         /*
 278          *  Scan type
 279          *  -----------------------------------------------------------
 280          *  Configuration :   Passive Scanning   Active Scanning
 281          *  Values to set :                  0                 1
 282          *  -----------------------------------------------------------
 283          */
 284         WID_SCAN_TYPE                   = 0x0007,
 285
 286         /*
 287          *  Key Id (WEP default key Id)
 288          *  -----------------------------------------------------------
 289          *  Configuration :   Any value between 0 to 3
 290          *  Values to set :   Same value. Default is 0
 291          *  -----------------------------------------------------------
 292          */
 293         WID_KEY_ID                      = 0x0009,
 294
 295         /*
 296          *  QoS Enable
 297          *  -----------------------------------------------------------
 298          *  Configuration :   QoS Disable   WMM Enable
 299          *  Values to set :   0             1
 300          *  -----------------------------------------------------------
 301          */
 302         WID_QOS_ENABLE                  = 0x000A,
 303
 304         /*
 305          *  Power Management
 306          *  -----------------------------------------------------------
 307          *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
 308          *  Values to set : 0            1             2
 309          *  -----------------------------------------------------------
 310          */
 311         WID_POWER_MANAGEMENT            = 0x000B,
 312
 313         /*
 314          *  WEP/802 11I Configuration
 315          *  -----------------------------------------------------------
 316          *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
 317          *  Values (0x)  :   00     03   07     29       49       31      51
 318          *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
 319          *  Values (0x)  :      69        71
 320          *  -----------------------------------------------------------
 321          */
 322         WID_11I_MODE                    = 0x000C,
 323
 324         /*
 325          *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
 326          *  -----------------------------------------------------------
 327          *  Configuration : Open System Shared Key Any Type | 802.1x Auth
 328          *  Values (0x)   :    01             02         03 |    BIT2
 329          *  -----------------------------------------------------------
 330          */
 331         WID_AUTH_TYPE                   = 0x000D,
 332
 333         /*
 334          *  Site Survey Type
 335          *  -----------------------------------------------------------
 336          *  Configuration       :  Values to set
 337          *  Survey 1 Channel    :  0
 338          *  survey all Channels :  1
 339          *  Disable Site Survey :  2
 340          *  -----------------------------------------------------------
 341          */
 342         WID_SITE_SURVEY                 = 0x000E,
 343
 344         /*
 345          *  Listen Interval
 346          *  -----------------------------------------------------------
 347          *  Configuration :   Any value between 1 to 255
 348          *  Values to set :   Same value. Default is 3
 349          *  -----------------------------------------------------------
 350          */
 351         WID_LISTEN_INTERVAL             = 0x000F,
 352
 353         /*
 354          *  DTIM Period
 355          *  -----------------------------------------------------------
 356          *  Configuration :   Any value between 1 to 255
 357          *  Values to set :   Same value. Default is 3
 358          *  -----------------------------------------------------------
 359          */
 360         WID_DTIM_PERIOD                 = 0x0010,
 361
 362         /*
 363          *  ACK Policy
 364          *  -----------------------------------------------------------
 365          *  Configuration :   Normal Ack            No Ack
 366          *  Values to set :       0                   1
 367          *  -----------------------------------------------------------
 368          */
 369         WID_ACK_POLICY                  = 0x0011,
 370
 371         /*
 372          *  Reset MAC (Set only)
 373          *  -----------------------------------------------------------
 374          *  Configuration :   Don't Reset       Reset   No Request
 375          *  Values to set :       0               1         2
 376          *  -----------------------------------------------------------
 377          */
 378         WID_RESET                       = 0x0012,
 379
 380         /*
 381          *  Broadcast SSID Option: Setting this will adhere to "" SSID element
 382          *  -----------------------------------------------------------
 383          *  Configuration :   Enable             Disable
 384          *  Values to set :   1                  0
 385          *  -----------------------------------------------------------
 386          */
 387         WID_BCAST_SSID                  = 0x0015,
 388
 389         /*
 390          *  Disconnect (Station)
 391          *  -----------------------------------------------------------
 392          *  Configuration :   Association ID
 393          *  Values to set :   Association ID
 394          *  -----------------------------------------------------------
 395          */
 396         WID_DISCONNECT                  = 0x0016,
 397
 398         /*
 399          *  11a Tx Power Level
 400          *  -----------------------------------------------------------
 401          *  Configuration : Sets TX Power (Higher the value greater the power)
 402          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 403          *  -----------------------------------------------------------
 404          */
 405         WID_TX_POWER_LEVEL_11A          = 0x0018,
 406
 407         /*
 408          *  Group Key Update Policy Selection
 409          *  -----------------------------------------------------------
 410          *  Configuration : Disabled timeBased packetBased timePacketBased
 411          *  Values to set :   1            2          3              4
 412          *  -----------------------------------------------------------
 413          */
 414         WID_REKEY_POLICY                = 0x0019,
 415
 416         /*
 417          *  Allow Short Slot
 418          *  -----------------------------------------------------------
 419          *  Configuration : Disallow Short Slot      Allow Short Slot
 420          *          (Enable Only Long Slot) (Enable Short Slot if applicable)
 421          *  Values to set :    0         1
 422          *  -----------------------------------------------------------
 423          */
 424         WID_SHORT_SLOT_ALLOWED          = 0x001A,
 425
 426         WID_PHY_ACTIVE_REG              = 0x001B,
 427
 428         /*
 429          *  11b Tx Power Level
 430          *  -----------------------------------------------------------
 431          *  Configuration : Sets TX Power (Higher the value greater the power)
 432          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 433          *  -----------------------------------------------------------
 434          */
 435         WID_TX_POWER_LEVEL_11B          = 0x001D,
 436
 437         /*
 438          *  Scan Request
 439          *  -----------------------------------------------------------
 440          *  Configuration : Request default scan
 441          *  Values to set : 0
 442          *  -----------------------------------------------------------
 443          */
 444         WID_START_SCAN_REQ              = 0x001E,
 445
 446         /*
 447          *  Rssi (get only)
 448          *  -----------------------------------------------------------
 449          *  Configuration :
 450          *  Values to get : Rssi value
 451          *  -----------------------------------------------------------
 452          */
 453         WID_RSSI                        = 0x001F,
 454
 455         /*
 456          * Join Request
 457          *  -----------------------------------------------------------
 458          *  Configuration : Request to join
 459          *  Values to set : index of scan result
 460          *  -----------------------------------------------------------
 461          */
 462         WID_JOIN_REQ                    = 0x0020,
 463
 464         WID_LINKSPEED                   = 0x0026,
 465
 466         /*
 467          *  Enable User Control of TX Power
 468          *  -----------------------------------------------------------
 469          *  Configuration : Disable                  Enable
 470          *  Values to set :    0                       1
 471          *  -----------------------------------------------------------
 472          */
 473         WID_USER_CONTROL_ON_TX_POWER    = 0x0027,
 474
 475         WID_MEMORY_ACCESS_8BIT          = 0x0029,
 476
 477         /*
 478          *  Enable Auto RX Sensitivity feature
 479          *  -----------------------------------------------------------
 480          *  Configuration : Disable                  Enable
 481          *  Values to set :    0                       1
 482          *  -----------------------------------------------------------
 483          */
 484         WID_AUTO_RX_SENSITIVITY         = 0x0032,
 485
 486         /*
 487          *  Receive Buffer Based Ack
 488          *  -----------------------------------------------------------
 489          *  Configuration : Disable                  Enable
 490          *  Values to set :    0                       1
 491          *  -----------------------------------------------------------
 492          */
 493         WID_DATAFLOW_CONTROL            = 0x0033,
 494
 495         /*
 496          *  Scan Filter
 497          *  -----------------------------------------------------------
 498          *  Configuration : Class       No filter   AP only   Station Only
 499          *  Values to set :                0           1           2
 500          *  Configuration : Priority    High Rssi   Low Rssi     Detect
 501          *  Values to set :                0          0x4         0x0
 502          *  Configuration : Channel     filter off  filter on
 503          *  Values to set :                0          0x10
 504          *  -----------------------------------------------------------
 505          */
 506         WID_SCAN_FILTER                 = 0x0036,
 507
 508         /*
 509          *  Link Loss Threshold (measure in the beacon period)
 510          *  -----------------------------------------------------------
 511          *  Configuration : Any value between 10 and 254(Set to 255 disable)
 512          *  Values to set : Same value. Default is 10
 513          *  -----------------------------------------------------------
 514          */
 515         WID_LINK_LOSS_THRESHOLD         = 0x0037,
 516
 517         WID_ABORT_RUNNING_SCAN          = 0x003E,
 518
 519         /* NMAC Character WID list */
 520         WID_WPS_START                   = 0x0043,
 521
 522         /*
 523          *  Protection mode for MAC
 524          *  -----------------------------------------------------------
 525          *  Configuration :  Auto  No protection  ERP    HT    GF
 526          *  Values to set :  0     1              2      3     4
 527          *  -----------------------------------------------------------
 528          */
 529         WID_11N_PROT_MECH               = 0x0080,
 530
 531         /*
 532          *  ERP Protection type for MAC
 533          *  -----------------------------------------------------------
 534          *  Configuration :  Self-CTS   RTS-CTS
 535          *  Values to set :  0          1
 536          *  -----------------------------------------------------------
 537          */
 538         WID_11N_ERP_PROT_TYPE           = 0x0081,
 539
 540         /*
 541          *  HT Option Enable
 542          *  -----------------------------------------------------------
 543          *  Configuration :   HT Enable          HT Disable
 544          *  Values to set :   1                  0
 545          *  -----------------------------------------------------------
 546          */
 547         WID_11N_ENABLE                  = 0x0082,
 548
 549         /*
 550          *  11n Operating mode (Note that 11g operating mode will also be
 551          *  used in addition to this, if this is set to HT Mixed mode)
 552          *  -----------------------------------------------------------
 553          *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
 554          *  Values to set :     1         2               3
 555          *  -----------------------------------------------------------
 556          */
 557         WID_11N_OPERATING_MODE          = 0x0083,
 558
 559         /*
 560          *  11n OBSS non-HT STA Detection flag
 561          *  -----------------------------------------------------------
 562          *  Configuration :  Do not detect
 563          *  Values to set :  0
 564          *  Configuration :  Detect, do not protect or report
 565          *  Values to set :  1
 566          *  Configuration :  Detect, protect and do not report
 567          *  Values to set :  2
 568          *  Configuration :  Detect, protect and report to other BSS
 569          *  Values to set :  3
 570          *  -----------------------------------------------------------
 571          */
 572         WID_11N_OBSS_NONHT_DETECTION    = 0x0084,
 573
 574         /*
 575          *  11n HT Protection Type
 576          *  -----------------------------------------------------------
 577          *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
 578          *  Values to set :  0         1
 579          *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
 580          *  Values to set :  2         3
 581          *  -----------------------------------------------------------
 582          */
 583         WID_11N_HT_PROT_TYPE            = 0x0085,
 584
 585         /*
 586          *  11n RIFS Protection Enable Flag
 587          *  -----------------------------------------------------------
 588          *  Configuration :  Disable    Enable
 589          *  Values to set :  0          1
 590          *  -----------------------------------------------------------
 591          */
 592         WID_11N_RIFS_PROT_ENABLE        = 0x0086,
 593
 594         /*
 595          *  SMPS Mode
 596          *  -----------------------------------------------------------
 597          *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
 598          *  Values to set :  1        2         3
 599          *  -----------------------------------------------------------
 600          */
 601         WID_11N_SMPS_MODE               = 0x0087,
 602
 603         /*
 604          *  Current transmit MCS
 605          *  -----------------------------------------------------------
 606          *  Configuration :  MCS Index for data rate
 607          *  Values to set :  0 to 7
 608          *  -----------------------------------------------------------
 609          */
 610         WID_11N_CURRENT_TX_MCS          = 0x0088,
 611
 612         WID_11N_PRINT_STATS             = 0x0089,
 613
 614         /*
 615          *  11n Short GI Enable Flag
 616          *  -----------------------------------------------------------
 617          *  Configuration :  Disable    Enable
 618          *  Values to set :  0          1
 619          *  -----------------------------------------------------------
 620          */
 621         WID_11N_SHORT_GI_ENABLE         = 0x008D,
 622
 623         /*
 624          *  11n RIFS Enable Flag
 625          *  -----------------------------------------------------------
 626          *  Configuration :  Disable    Enable
 627          *  Values to set :  0          1
 628          *  -----------------------------------------------------------
 629          */
 630         WID_RIFS_MODE                   = 0x0094,
 631
 632         /*
 633          *  TX Abort Feature
 634          *  -----------------------------------------------------------
 635          *  Configuration :  Disable Self CTS    Enable Self CTS
 636          *  Values to set :             0                      1
 637          *  Configuration :  Disable TX Abort    Enable TX Abort
 638          *  Values to set :             2                      3
 639          *  Configuration :  Enable HW TX Abort Enable SW TX Abort
 640          *  Values to set :             4                      5
 641          *  -----------------------------------------------------------
 642          */
 643         WID_TX_ABORT_CONFIG             = 0x00A1,
 644
 645         WID_REG_TSSI_11B_VALUE          = 0x00A6,
 646         WID_REG_TSSI_11G_VALUE          = 0x00A7,
 647         WID_REG_TSSI_11N_VALUE          = 0x00A8,
 648         WID_TX_CALIBRATION              = 0x00A9,
 649         WID_DSCR_TSSI_11B_VALUE         = 0x00AA,
 650         WID_DSCR_TSSI_11G_VALUE         = 0x00AB,
 651         WID_DSCR_TSSI_11N_VALUE         = 0x00AC,
 652
 653         /*
 654          *  Immediate Block-Ack Support
 655          *  -----------------------------------------------------------
 656          *  Configuration : Disable                  Enable
 657          *  Values to set :    0                       1
 658          *  -----------------------------------------------------------
 659          */
 660         WID_11N_IMMEDIATE_BA_ENABLED    = 0x00AF,
 661
 662         /*
 663          *  TXOP Disable Flag
 664          *  -----------------------------------------------------------
 665          *  Configuration : Disable                  Enable
 666          *  Values to set :    1                        0
 667          *  -----------------------------------------------------------
 668          */
 669         WID_11N_TXOP_PROT_DISABLE       = 0x00B0,
 670
 671         WID_TX_POWER_LEVEL_11N          = 0x00B1,
 672
 673         /* Custom Character WID list */
 674         WID_PC_TEST_MODE                = 0x00C8,
 675         /* SCAN Complete notification WID*/
 676         WID_SCAN_COMPLETE               = 0x00C9,
 677
 678         WID_DEL_BEACON                  = 0x00CA,
 679
 680         WID_LOG_TERMINAL_SWITCH         = 0x00CD,
 681         WID_TX_POWER                    = 0x00CE,
 682         /*  EMAC Short WID list */
 683         /*  RTS Threshold */
 684         /*
 685          *  -----------------------------------------------------------
 686          *  Configuration :   Any value between 256 to 2347
 687          *  Values to set :   Same value. Default is 2347
 688          *  -----------------------------------------------------------
 689          */
 690         WID_RTS_THRESHOLD               = 0x1000,
 691
 692         /*
 693          *  Fragmentation Threshold
 694          *  -----------------------------------------------------------
 695          *  Configuration :   Any value between 256 to 2346
 696          *  Values to set :   Same value. Default is 2346
 697          *  -----------------------------------------------------------
 698          */
 699         WID_FRAG_THRESHOLD              = 0x1001,
 700
 701         WID_SHORT_RETRY_LIMIT           = 0x1002,
 702         WID_LONG_RETRY_LIMIT            = 0x1003,
 703         WID_BEACON_INTERVAL             = 0x1006,
 704         WID_MEMORY_ACCESS_16BIT         = 0x1008,
 705         WID_RX_SENSE                    = 0x100B,
 706         WID_ACTIVE_SCAN_TIME            = 0x100C,
 707         WID_PASSIVE_SCAN_TIME           = 0x100D,
 708
 709         WID_SITE_SURVEY_SCAN_TIME       = 0x100E,
 710         WID_JOIN_START_TIMEOUT          = 0x100F,
 711         WID_AUTH_TIMEOUT                = 0x1010,
 712         WID_ASOC_TIMEOUT                = 0x1011,
 713         WID_11I_PROTOCOL_TIMEOUT        = 0x1012,
 714         WID_EAPOL_RESPONSE_TIMEOUT      = 0x1013,
 715
 716         /* NMAC Short WID list */
 717         WID_11N_SIG_QUAL_VAL            = 0x1085,
 718         WID_CCA_THRESHOLD               = 0x1087,
 719
 720         /* Custom Short WID list */
 721
 722         /* EMAC Integer WID list */
 723         WID_FAILED_COUNT                = 0x2000,
 724         WID_RETRY_COUNT                 = 0x2001,
 725         WID_MULTIPLE_RETRY_COUNT        = 0x2002,
 726         WID_FRAME_DUPLICATE_COUNT       = 0x2003,
 727         WID_ACK_FAILURE_COUNT           = 0x2004,
 728         WID_RECEIVED_FRAGMENT_COUNT     = 0x2005,
 729         WID_MCAST_RECEIVED_FRAME_COUNT  = 0x2006,
 730         WID_FCS_ERROR_COUNT             = 0x2007,
 731         WID_SUCCESS_FRAME_COUNT         = 0x2008,
 732         WID_HUT_TX_COUNT                = 0x200A,
 733         WID_TX_FRAGMENT_COUNT           = 0x200B,
 734         WID_TX_MULTICAST_FRAME_COUNT    = 0x200C,
 735         WID_RTS_SUCCESS_COUNT           = 0x200D,
 736         WID_RTS_FAILURE_COUNT           = 0x200E,
 737         WID_WEP_UNDECRYPTABLE_COUNT     = 0x200F,
 738         WID_REKEY_PERIOD                = 0x2010,
 739         WID_REKEY_PACKET_COUNT          = 0x2011,
 740         WID_1X_SERV_ADDR                = 0x2012,
 741         WID_STACK_IP_ADDR               = 0x2013,
 742         WID_STACK_NETMASK_ADDR          = 0x2014,
 743         WID_HW_RX_COUNT                 = 0x2015,
 744         WID_MEMORY_ADDRESS              = 0x201E,
 745         WID_MEMORY_ACCESS_32BIT         = 0x201F,
 746         WID_RF_REG_VAL                  = 0x2021,
 747
 748         /* NMAC Integer WID list */
 749         WID_11N_PHY_ACTIVE_REG_VAL      = 0x2080,
 750
 751         /* Custom Integer WID list */
 752         WID_GET_INACTIVE_TIME           = 0x2084,
 753         WID_SET_OPERATION_MODE          = 0X2086,
 754         /* EMAC String WID list */
 755         WID_SSID                        = 0x3000,
 756         WID_FIRMWARE_VERSION            = 0x3001,
 757         WID_OPERATIONAL_RATE_SET        = 0x3002,
 758         WID_BSSID                       = 0x3003,
 759         WID_WEP_KEY_VALUE               = 0x3004,
 760         WID_11I_PSK                     = 0x3008,
 761         WID_11E_P_ACTION_REQ            = 0x3009,
 762         WID_1X_KEY                      = 0x300A,
 763         WID_HARDWARE_VERSION            = 0x300B,
 764         WID_MAC_ADDR                    = 0x300C,
 765         WID_HUT_DEST_ADDR               = 0x300D,
 766         WID_PHY_VERSION                 = 0x300F,
 767         WID_SUPP_USERNAME               = 0x3010,
 768         WID_SUPP_PASSWORD               = 0x3011,
 769         WID_SITE_SURVEY_RESULTS         = 0x3012,
 770         WID_RX_POWER_LEVEL              = 0x3013,
 771         WID_DEL_ALL_RX_BA               = 0x3014,
 772         WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
 773         WID_ADD_WEP_KEY                 = 0x3019,
 774         WID_REMOVE_WEP_KEY              = 0x301A,
 775         WID_ADD_PTK                     = 0x301B,
 776         WID_ADD_RX_GTK                  = 0x301C,
 777         WID_ADD_TX_GTK                  = 0x301D,
 778         WID_REMOVE_KEY                  = 0x301E,
 779         WID_ASSOC_REQ_INFO              = 0x301F,
 780         WID_ASSOC_RES_INFO              = 0x3020,
 781         WID_MANUFACTURER                = 0x3026, /*Added for CAPI tool */
 782         WID_MODEL_NAME                  = 0x3027, /*Added for CAPI tool */
 783         WID_MODEL_NUM                   = 0x3028, /*Added for CAPI tool */
 784         WID_DEVICE_NAME                 = 0x3029, /*Added for CAPI tool */
 785         WID_SET_DRV_HANDLER             = 0x3079,
 786
 787         /* NMAC String WID list */
 788         WID_11N_P_ACTION_REQ            = 0x3080,
 789         WID_HUT_TEST_ID                 = 0x3081,
 790         WID_PMKID_INFO                  = 0x3082,
 791         WID_FIRMWARE_INFO               = 0x3083,
 792         WID_REGISTER_FRAME              = 0x3084,
 793         WID_DEL_ALL_STA                 = 0x3085,
 794         WID_REMAIN_ON_CHAN              = 0x3996,
 795         WID_SSID_PROBE_REQ              = 0x3997,
 796         WID_JOIN_REQ_EXTENDED           = 0x3998,
 797
 798         WID_IP_ADDRESS                  = 0x3999,
 799
 800         /* Custom String WID list */
 801
 802         /* EMAC Binary WID list */
 803         WID_UAPSD_CONFIG                = 0x4001,
 804         WID_UAPSD_STATUS                = 0x4002,
 805         WID_WMM_AP_AC_PARAMS            = 0x4003,
 806         WID_WMM_STA_AC_PARAMS           = 0x4004,
 807         WID_NETWORK_INFO                = 0x4005,
 808         WID_STA_JOIN_INFO               = 0x4006,
 809         WID_CONNECTED_STA_LIST          = 0x4007,
 810
 811         /* NMAC Binary WID list */
 812         WID_11N_AUTORATE_TABLE          = 0x4080,
 813
 814         WID_SCAN_CHANNEL_LIST           = 0x4084,
 815
 816         WID_INFO_ELEMENT_PROBE          = 0x4085,
 817         WID_INFO_ELEMENT_ASSOCIATE      = 0x4086,
 818         WID_ADD_STA                     = 0X4087,
 819         WID_REMOVE_STA                  = 0X4088,
 820         WID_EDIT_STA                    = 0X4089,
 821         WID_ADD_BEACON                  = 0x408a,
 822
 823         WID_SETUP_MULTICAST_FILTER      = 0x408b,
 824
 825         /* Miscellaneous WIDs */
 826         WID_ALL                         = 0x7FFE,
 827         WID_MAX                         = 0xFFFF
 828 };
 829
 830 struct wilc;
 831 int wilc_wlan_init(struct net_device *dev);
 832 u32 wilc_get_chipid(struct wilc *wilc, bool update);
 833
 834 #endif