drivers/usb/dwc2/hcd_intr.c

   1 /*
   2  * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
   3  *
   4  * Copyright (C) 2004-2013 Synopsys, Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions, and the following disclaimer,
  11  *    without modification.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. The names of the above-listed copyright holders may not be used
  16  *    to endorse or promote products derived from this software without
  17  *    specific prior written permission.
  18  *
  19  * ALTERNATIVELY, this software may be distributed under the terms of the
  20  * GNU General Public License ("GPL") as published by the Free Software
  21  * Foundation; either version 2 of the License, or (at your option) any
  22  * later version.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  25  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  26  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  27  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  28  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  29  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  30  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  31  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  32  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  33  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  34  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  35  */
  36
  37 /*
  38  * This file contains the interrupt handlers for Host mode
  39  */
  40 #include <linux/kernel.h>
  41 #include <linux/module.h>
  42 #include <linux/spinlock.h>
  43 #include <linux/interrupt.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/io.h>
  46 #include <linux/slab.h>
  47 #include <linux/usb.h>
  48
  49 #include <linux/usb/hcd.h>
  50 #include <linux/usb/ch11.h>
  51
  52 #include "core.h"
  53 #include "hcd.h"
  54
  55 /* This function is for debug only */
  56 static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
  57 {
  58         u16 curr_frame_number = hsotg->frame_number;
  59         u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1);
  60
  61         if (expected != curr_frame_number)
  62                 dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n",
  63                         expected, curr_frame_number);
  64
  65 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
  66         if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
  67                 if (expected != curr_frame_number) {
  68                         hsotg->frame_num_array[hsotg->frame_num_idx] =
  69                                         curr_frame_number;
  70                         hsotg->last_frame_num_array[hsotg->frame_num_idx] =
  71                                         hsotg->last_frame_num;
  72                         hsotg->frame_num_idx++;
  73                 }
  74         } else if (!hsotg->dumped_frame_num_array) {
  75                 int i;
  76
  77                 dev_info(hsotg->dev, "Frame     Last Frame\n");
  78                 dev_info(hsotg->dev, "-----     ----------\n");
  79                 for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
  80                         dev_info(hsotg->dev, "0x%04x    0x%04x\n",
  81                                  hsotg->frame_num_array[i],
  82                                  hsotg->last_frame_num_array[i]);
  83                 }
  84                 hsotg->dumped_frame_num_array = 1;
  85         }
  86 #endif
  87         hsotg->last_frame_num = curr_frame_number;
  88 }
  89
  90 static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
  91                                     struct dwc2_host_chan *chan,
  92                                     struct dwc2_qtd *qtd)
  93 {
  94         struct usb_device *root_hub = dwc2_hsotg_to_hcd(hsotg)->self.root_hub;
  95         struct urb *usb_urb;
  96
  97         if (!chan->qh)
  98                 return;
  99
 100         if (chan->qh->dev_speed == USB_SPEED_HIGH)
 101                 return;
 102
 103         if (!qtd->urb)
 104                 return;
 105
 106         usb_urb = qtd->urb->priv;
 107         if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt)
 108                 return;
 109
 110         /*
 111          * The root hub doesn't really have a TT, but Linux thinks it
 112          * does because how could you have a "high speed hub" that
 113          * directly talks directly to low speed devices without a TT?
 114          * It's all lies.  Lies, I tell you.
 115          */
 116         if (usb_urb->dev->tt->hub == root_hub)
 117                 return;
 118
 119         if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
 120                 chan->qh->tt_buffer_dirty = 1;
 121                 if (usb_hub_clear_tt_buffer(usb_urb))
 122                         /* Clear failed; let's hope things work anyway */
 123                         chan->qh->tt_buffer_dirty = 0;
 124         }
 125 }
 126
 127 /*
 128  * Handles the start-of-frame interrupt in host mode. Non-periodic
 129  * transactions may be queued to the DWC_otg controller for the current
 130  * (micro)frame. Periodic transactions may be queued to the controller
 131  * for the next (micro)frame.
 132  */
 133 static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
 134 {
 135         struct list_head *qh_entry;
 136         struct dwc2_qh *qh;
 137         enum dwc2_transaction_type tr_type;
 138
 139         /* Clear interrupt */
 140         dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
 141
 142 #ifdef DEBUG_SOF
 143         dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
 144 #endif
 145
 146         hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
 147
 148         dwc2_track_missed_sofs(hsotg);
 149
 150         /* Determine whether any periodic QHs should be executed */
 151         qh_entry = hsotg->periodic_sched_inactive.next;
 152         while (qh_entry != &hsotg->periodic_sched_inactive) {
 153                 qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry);
 154                 qh_entry = qh_entry->next;
 155                 if (dwc2_frame_num_le(qh->next_active_frame,
 156                                       hsotg->frame_number)) {
 157                         dwc2_sch_vdbg(hsotg, "QH=%p ready fn=%04x, nxt=%04x\n",
 158                                       qh, hsotg->frame_number,
 159                                       qh->next_active_frame);
 160
 161                         /*
 162                          * Move QH to the ready list to be executed next
 163                          * (micro)frame
 164                          */
 165                         list_move_tail(&qh->qh_list_entry,
 166                                   &hsotg->periodic_sched_ready);
 167                 }
 168         }
 169         tr_type = dwc2_hcd_select_transactions(hsotg);
 170         if (tr_type != DWC2_TRANSACTION_NONE)
 171                 dwc2_hcd_queue_transactions(hsotg, tr_type);
 172 }
 173
 174 /*
 175  * Handles the Rx FIFO Level Interrupt, which indicates that there is
 176  * at least one packet in the Rx FIFO. The packets are moved from the FIFO to
 177  * memory if the DWC_otg controller is operating in Slave mode.
 178  */
 179 static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg)
 180 {
 181         u32 grxsts, chnum, bcnt, dpid, pktsts;
 182         struct dwc2_host_chan *chan;
 183
 184         if (dbg_perio())
 185                 dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
 186
 187         grxsts = dwc2_readl(hsotg->regs + GRXSTSP);
 188         chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT;
 189         chan = hsotg->hc_ptr_array[chnum];
 190         if (!chan) {
 191                 dev_err(hsotg->dev, "Unable to get corresponding channel\n");
 192                 return;
 193         }
 194
 195         bcnt = (grxsts & GRXSTS_BYTECNT_MASK) >> GRXSTS_BYTECNT_SHIFT;
 196         dpid = (grxsts & GRXSTS_DPID_MASK) >> GRXSTS_DPID_SHIFT;
 197         pktsts = (grxsts & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT;
 198
 199         /* Packet Status */
 200         if (dbg_perio()) {
 201                 dev_vdbg(hsotg->dev, "    Ch num = %d\n", chnum);
 202                 dev_vdbg(hsotg->dev, "    Count = %d\n", bcnt);
 203                 dev_vdbg(hsotg->dev, "    DPID = %d, chan.dpid = %d\n", dpid,
 204                          chan->data_pid_start);
 205                 dev_vdbg(hsotg->dev, "    PStatus = %d\n", pktsts);
 206         }
 207
 208         switch (pktsts) {
 209         case GRXSTS_PKTSTS_HCHIN:
 210                 /* Read the data into the host buffer */
 211                 if (bcnt > 0) {
 212                         dwc2_read_packet(hsotg, chan->xfer_buf, bcnt);
 213
 214                         /* Update the HC fields for the next packet received */
 215                         chan->xfer_count += bcnt;
 216                         chan->xfer_buf += bcnt;
 217                 }
 218                 break;
 219         case GRXSTS_PKTSTS_HCHIN_XFER_COMP:
 220         case GRXSTS_PKTSTS_DATATOGGLEERR:
 221         case GRXSTS_PKTSTS_HCHHALTED:
 222                 /* Handled in interrupt, just ignore data */
 223                 break;
 224         default:
 225                 dev_err(hsotg->dev,
 226                         "RxFIFO Level Interrupt: Unknown status %d\n", pktsts);
 227                 break;
 228         }
 229 }
 230
 231 /*
 232  * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
 233  * data packets may be written to the FIFO for OUT transfers. More requests
 234  * may be written to the non-periodic request queue for IN transfers. This
 235  * interrupt is enabled only in Slave mode.
 236  */
 237 static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
 238 {
 239         dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n");
 240         dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC);
 241 }
 242
 243 /*
 244  * This interrupt occurs when the periodic Tx FIFO is half-empty. More data
 245  * packets may be written to the FIFO for OUT transfers. More requests may be
 246  * written to the periodic request queue for IN transfers. This interrupt is
 247  * enabled only in Slave mode.
 248  */
 249 static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
 250 {
 251         if (dbg_perio())
 252                 dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n");
 253         dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC);
 254 }
 255
 256 static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0,
 257                               u32 *hprt0_modify)
 258 {
 259         struct dwc2_core_params *params = hsotg->core_params;
 260         int do_reset = 0;
 261         u32 usbcfg;
 262         u32 prtspd;
 263         u32 hcfg;
 264         u32 fslspclksel;
 265         u32 hfir;
 266
 267         dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
 268
 269         /* Every time when port enables calculate HFIR.FrInterval */
 270         hfir = dwc2_readl(hsotg->regs + HFIR);
 271         hfir &= ~HFIR_FRINT_MASK;
 272         hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
 273                 HFIR_FRINT_MASK;
 274         dwc2_writel(hfir, hsotg->regs + HFIR);
 275
 276         /* Check if we need to adjust the PHY clock speed for low power */
 277         if (!params->host_support_fs_ls_low_power) {
 278                 /* Port has been enabled, set the reset change flag */
 279                 hsotg->flags.b.port_reset_change = 1;
 280                 return;
 281         }
 282
 283         usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 284         prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
 285
 286         if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
 287                 /* Low power */
 288                 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
 289                         /* Set PHY low power clock select for FS/LS devices */
 290                         usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
 291                         dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 292                         do_reset = 1;
 293                 }
 294
 295                 hcfg = dwc2_readl(hsotg->regs + HCFG);
 296                 fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >>
 297                               HCFG_FSLSPCLKSEL_SHIFT;
 298
 299                 if (prtspd == HPRT0_SPD_LOW_SPEED &&
 300                     params->host_ls_low_power_phy_clk ==
 301                     DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
 302                         /* 6 MHZ */
 303                         dev_vdbg(hsotg->dev,
 304                                  "FS_PHY programming HCFG to 6 MHz\n");
 305                         if (fslspclksel != HCFG_FSLSPCLKSEL_6_MHZ) {
 306                                 fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ;
 307                                 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
 308                                 hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
 309                                 dwc2_writel(hcfg, hsotg->regs + HCFG);
 310                                 do_reset = 1;
 311                         }
 312                 } else {
 313                         /* 48 MHZ */
 314                         dev_vdbg(hsotg->dev,
 315                                  "FS_PHY programming HCFG to 48 MHz\n");
 316                         if (fslspclksel != HCFG_FSLSPCLKSEL_48_MHZ) {
 317                                 fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ;
 318                                 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
 319                                 hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT;
 320                                 dwc2_writel(hcfg, hsotg->regs + HCFG);
 321                                 do_reset = 1;
 322                         }
 323                 }
 324         } else {
 325                 /* Not low power */
 326                 if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
 327                         usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
 328                         dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 329                         do_reset = 1;
 330                 }
 331         }
 332
 333         if (do_reset) {
 334                 *hprt0_modify |= HPRT0_RST;
 335                 dwc2_writel(*hprt0_modify, hsotg->regs + HPRT0);
 336                 queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work,
 337                                    msecs_to_jiffies(60));
 338         } else {
 339                 /* Port has been enabled, set the reset change flag */
 340                 hsotg->flags.b.port_reset_change = 1;
 341         }
 342 }
 343
 344 /*
 345  * There are multiple conditions that can cause a port interrupt. This function
 346  * determines which interrupt conditions have occurred and handles them
 347  * appropriately.
 348  */
 349 static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
 350 {
 351         u32 hprt0;
 352         u32 hprt0_modify;
 353
 354         dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
 355
 356         hprt0 = dwc2_readl(hsotg->regs + HPRT0);
 357         hprt0_modify = hprt0;
 358
 359         /*
 360          * Clear appropriate bits in HPRT0 to clear the interrupt bit in
 361          * GINTSTS
 362          */
 363         hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG |
 364                           HPRT0_OVRCURRCHG);
 365
 366         /*
 367          * Port Connect Detected
 368          * Set flag and clear if detected
 369          */
 370         if (hprt0 & HPRT0_CONNDET) {
 371                 dwc2_writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0);
 372
 373                 dev_vdbg(hsotg->dev,
 374                          "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
 375                          hprt0);
 376                 dwc2_hcd_connect(hsotg);
 377
 378                 /*
 379                  * The Hub driver asserts a reset when it sees port connect
 380                  * status change flag
 381                  */
 382         }
 383
 384         /*
 385          * Port Enable Changed
 386          * Clear if detected - Set internal flag if disabled
 387          */
 388         if (hprt0 & HPRT0_ENACHG) {
 389                 dwc2_writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0);
 390                 dev_vdbg(hsotg->dev,
 391                          "  --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
 392                          hprt0, !!(hprt0 & HPRT0_ENA));
 393                 if (hprt0 & HPRT0_ENA) {
 394                         hsotg->new_connection = true;
 395                         dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
 396                 } else {
 397                         hsotg->flags.b.port_enable_change = 1;
 398                         if (hsotg->core_params->dma_desc_fs_enable) {
 399                                 u32 hcfg;
 400
 401                                 hsotg->core_params->dma_desc_enable = 0;
 402                                 hsotg->new_connection = false;
 403                                 hcfg = dwc2_readl(hsotg->regs + HCFG);
 404                                 hcfg &= ~HCFG_DESCDMA;
 405                                 dwc2_writel(hcfg, hsotg->regs + HCFG);
 406                         }
 407                 }
 408         }
 409
 410         /* Overcurrent Change Interrupt */
 411         if (hprt0 & HPRT0_OVRCURRCHG) {
 412                 dwc2_writel(hprt0_modify | HPRT0_OVRCURRCHG,
 413                             hsotg->regs + HPRT0);
 414                 dev_vdbg(hsotg->dev,
 415                          "  --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
 416                          hprt0);
 417                 hsotg->flags.b.port_over_current_change = 1;
 418         }
 419 }
 420
 421 /*
 422  * Gets the actual length of a transfer after the transfer halts. halt_status
 423  * holds the reason for the halt.
 424  *
 425  * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read
 426  * is set to 1 upon return if less than the requested number of bytes were
 427  * transferred. short_read may also be NULL on entry, in which case it remains
 428  * unchanged.
 429  */
 430 static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg,
 431                                        struct dwc2_host_chan *chan, int chnum,
 432                                        struct dwc2_qtd *qtd,
 433                                        enum dwc2_halt_status halt_status,
 434                                        int *short_read)
 435 {
 436         u32 hctsiz, count, length;
 437
 438         hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
 439
 440         if (halt_status == DWC2_HC_XFER_COMPLETE) {
 441                 if (chan->ep_is_in) {
 442                         count = (hctsiz & TSIZ_XFERSIZE_MASK) >>
 443                                 TSIZ_XFERSIZE_SHIFT;
 444                         length = chan->xfer_len - count;
 445                         if (short_read != NULL)
 446                                 *short_read = (count != 0);
 447                 } else if (chan->qh->do_split) {
 448                         length = qtd->ssplit_out_xfer_count;
 449                 } else {
 450                         length = chan->xfer_len;
 451                 }
 452         } else {
 453                 /*
 454                  * Must use the hctsiz.pktcnt field to determine how much data
 455                  * has been transferred. This field reflects the number of
 456                  * packets that have been transferred via the USB. This is
 457                  * always an integral number of packets if the transfer was
 458                  * halted before its normal completion. (Can't use the
 459                  * hctsiz.xfersize field because that reflects the number of
 460                  * bytes transferred via the AHB, not the USB).
 461                  */
 462                 count = (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT;
 463                 length = (chan->start_pkt_count - count) * chan->max_packet;
 464         }
 465
 466         return length;
 467 }
 468
 469 /**
 470  * dwc2_update_urb_state() - Updates the state of the URB after a Transfer
 471  * Complete interrupt on the host channel. Updates the actual_length field
 472  * of the URB based on the number of bytes transferred via the host channel.
 473  * Sets the URB status if the data transfer is finished.
 474  *
 475  * Return: 1 if the data transfer specified by the URB is completely finished,
 476  * 0 otherwise
 477  */
 478 static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg,
 479                                  struct dwc2_host_chan *chan, int chnum,
 480                                  struct dwc2_hcd_urb *urb,
 481                                  struct dwc2_qtd *qtd)
 482 {
 483         u32 hctsiz;
 484         int xfer_done = 0;
 485         int short_read = 0;
 486         int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
 487                                                       DWC2_HC_XFER_COMPLETE,
 488                                                       &short_read);
 489
 490         if (urb->actual_length + xfer_length > urb->length) {
 491                 dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
 492                 xfer_length = urb->length - urb->actual_length;
 493         }
 494
 495         dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n",
 496                  urb->actual_length, xfer_length);
 497         urb->actual_length += xfer_length;
 498
 499         if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK &&
 500             (urb->flags & URB_SEND_ZERO_PACKET) &&
 501             urb->actual_length >= urb->length &&
 502             !(urb->length % chan->max_packet)) {
 503                 xfer_done = 0;
 504         } else if (short_read || urb->actual_length >= urb->length) {
 505                 xfer_done = 1;
 506                 urb->status = 0;
 507         }
 508
 509         hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
 510         dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
 511                  __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
 512         dev_vdbg(hsotg->dev, "  chan->xfer_len %d\n", chan->xfer_len);
 513         dev_vdbg(hsotg->dev, "  hctsiz.xfersize %d\n",
 514                  (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT);
 515         dev_vdbg(hsotg->dev, "  urb->transfer_buffer_length %d\n", urb->length);
 516         dev_vdbg(hsotg->dev, "  urb->actual_length %d\n", urb->actual_length);
 517         dev_vdbg(hsotg->dev, "  short_read %d, xfer_done %d\n", short_read,
 518                  xfer_done);
 519
 520         return xfer_done;
 521 }
 522
 523 /*
 524  * Save the starting data toggle for the next transfer. The data toggle is
 525  * saved in the QH for non-control transfers and it's saved in the QTD for
 526  * control transfers.
 527  */
 528 void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
 529                                struct dwc2_host_chan *chan, int chnum,
 530                                struct dwc2_qtd *qtd)
 531 {
 532         u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
 533         u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
 534
 535         if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
 536                 if (WARN(!chan || !chan->qh,
 537                          "chan->qh must be specified for non-control eps\n"))
 538                         return;
 539
 540                 if (pid == TSIZ_SC_MC_PID_DATA0)
 541                         chan->qh->data_toggle = DWC2_HC_PID_DATA0;
 542                 else
 543                         chan->qh->data_toggle = DWC2_HC_PID_DATA1;
 544         } else {
 545                 if (WARN(!qtd,
 546                          "qtd must be specified for control eps\n"))
 547                         return;
 548
 549                 if (pid == TSIZ_SC_MC_PID_DATA0)
 550                         qtd->data_toggle = DWC2_HC_PID_DATA0;
 551                 else
 552                         qtd->data_toggle = DWC2_HC_PID_DATA1;
 553         }
 554 }
 555
 556 /**
 557  * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when
 558  * the transfer is stopped for any reason. The fields of the current entry in
 559  * the frame descriptor array are set based on the transfer state and the input
 560  * halt_status. Completes the Isochronous URB if all the URB frames have been
 561  * completed.
 562  *
 563  * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be
 564  * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE.
 565  */
 566 static enum dwc2_halt_status dwc2_update_isoc_urb_state(
 567                 struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
 568                 int chnum, struct dwc2_qtd *qtd,
 569                 enum dwc2_halt_status halt_status)
 570 {
 571         struct dwc2_hcd_iso_packet_desc *frame_desc;
 572         struct dwc2_hcd_urb *urb = qtd->urb;
 573
 574         if (!urb)
 575                 return DWC2_HC_XFER_NO_HALT_STATUS;
 576
 577         frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
 578
 579         switch (halt_status) {
 580         case DWC2_HC_XFER_COMPLETE:
 581                 frame_desc->status = 0;
 582                 frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
 583                                         chan, chnum, qtd, halt_status, NULL);
 584                 break;
 585         case DWC2_HC_XFER_FRAME_OVERRUN:
 586                 urb->error_count++;
 587                 if (chan->ep_is_in)
 588                         frame_desc->status = -ENOSR;
 589                 else
 590                         frame_desc->status = -ECOMM;
 591                 frame_desc->actual_length = 0;
 592                 break;
 593         case DWC2_HC_XFER_BABBLE_ERR:
 594                 urb->error_count++;
 595                 frame_desc->status = -EOVERFLOW;
 596                 /* Don't need to update actual_length in this case */
 597                 break;
 598         case DWC2_HC_XFER_XACT_ERR:
 599                 urb->error_count++;
 600                 frame_desc->status = -EPROTO;
 601                 frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
 602                                         chan, chnum, qtd, halt_status, NULL);
 603
 604                 /* Skip whole frame */
 605                 if (chan->qh->do_split &&
 606                     chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
 607                     hsotg->core_params->dma_enable > 0) {
 608                         qtd->complete_split = 0;
 609                         qtd->isoc_split_offset = 0;
 610                 }
 611
 612                 break;
 613         default:
 614                 dev_err(hsotg->dev, "Unhandled halt_status (%d)\n",
 615                         halt_status);
 616                 break;
 617         }
 618
 619         if (++qtd->isoc_frame_index == urb->packet_count) {
 620                 /*
 621                  * urb->status is not used for isoc transfers. The individual
 622                  * frame_desc statuses are used instead.
 623                  */
 624                 dwc2_host_complete(hsotg, qtd, 0);
 625                 halt_status = DWC2_HC_XFER_URB_COMPLETE;
 626         } else {
 627                 halt_status = DWC2_HC_XFER_COMPLETE;
 628         }
 629
 630         return halt_status;
 631 }
 632
 633 /*
 634  * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
 635  * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
 636  * still linked to the QH, the QH is added to the end of the inactive
 637  * non-periodic schedule. For periodic QHs, removes the QH from the periodic
 638  * schedule if no more QTDs are linked to the QH.
 639  */
 640 static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 641                                int free_qtd)
 642 {
 643         int continue_split = 0;
 644         struct dwc2_qtd *qtd;
 645
 646         if (dbg_qh(qh))
 647                 dev_vdbg(hsotg->dev, "  %s(%p,%p,%d)\n", __func__,
 648                          hsotg, qh, free_qtd);
 649
 650         if (list_empty(&qh->qtd_list)) {
 651                 dev_dbg(hsotg->dev, "## QTD list empty ##\n");
 652                 goto no_qtd;
 653         }
 654
 655         qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
 656
 657         if (qtd->complete_split)
 658                 continue_split = 1;
 659         else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID ||
 660                  qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END)
 661                 continue_split = 1;
 662
 663         if (free_qtd) {
 664                 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
 665                 continue_split = 0;
 666         }
 667
 668 no_qtd:
 669         qh->channel = NULL;
 670         dwc2_hcd_qh_deactivate(hsotg, qh, continue_split);
 671 }
 672
 673 /**
 674  * dwc2_release_channel() - Releases a host channel for use by other transfers
 675  *
 676  * @hsotg:       The HCD state structure
 677  * @chan:        The host channel to release
 678  * @qtd:         The QTD associated with the host channel. This QTD may be
 679  *               freed if the transfer is complete or an error has occurred.
 680  * @halt_status: Reason the channel is being released. This status
 681  *               determines the actions taken by this function.
 682  *
 683  * Also attempts to select and queue more transactions since at least one host
 684  * channel is available.
 685  */
 686 static void dwc2_release_channel(struct dwc2_hsotg *hsotg,
 687                                  struct dwc2_host_chan *chan,
 688                                  struct dwc2_qtd *qtd,
 689                                  enum dwc2_halt_status halt_status)
 690 {
 691         enum dwc2_transaction_type tr_type;
 692         u32 haintmsk;
 693         int free_qtd = 0;
 694
 695         if (dbg_hc(chan))
 696                 dev_vdbg(hsotg->dev, "  %s: channel %d, halt_status %d\n",
 697                          __func__, chan->hc_num, halt_status);
 698
 699         switch (halt_status) {
 700         case DWC2_HC_XFER_URB_COMPLETE:
 701                 free_qtd = 1;
 702                 break;
 703         case DWC2_HC_XFER_AHB_ERR:
 704         case DWC2_HC_XFER_STALL:
 705         case DWC2_HC_XFER_BABBLE_ERR:
 706                 free_qtd = 1;
 707                 break;
 708         case DWC2_HC_XFER_XACT_ERR:
 709                 if (qtd && qtd->error_count >= 3) {
 710                         dev_vdbg(hsotg->dev,
 711                                  "  Complete URB with transaction error\n");
 712                         free_qtd = 1;
 713                         dwc2_host_complete(hsotg, qtd, -EPROTO);
 714                 }
 715                 break;
 716         case DWC2_HC_XFER_URB_DEQUEUE:
 717                 /*
 718                  * The QTD has already been removed and the QH has been
 719                  * deactivated. Don't want to do anything except release the
 720                  * host channel and try to queue more transfers.
 721                  */
 722                 goto cleanup;
 723         case DWC2_HC_XFER_PERIODIC_INCOMPLETE:
 724                 dev_vdbg(hsotg->dev, "  Complete URB with I/O error\n");
 725                 free_qtd = 1;
 726                 dwc2_host_complete(hsotg, qtd, -EIO);
 727                 break;
 728         case DWC2_HC_XFER_NO_HALT_STATUS:
 729         default:
 730                 break;
 731         }
 732
 733         dwc2_deactivate_qh(hsotg, chan->qh, free_qtd);
 734
 735 cleanup:
 736         /*
 737          * Release the host channel for use by other transfers. The cleanup
 738          * function clears the channel interrupt enables and conditions, so
 739          * there's no need to clear the Channel Halted interrupt separately.
 740          */
 741         if (!list_empty(&chan->hc_list_entry))
 742                 list_del(&chan->hc_list_entry);
 743         dwc2_hc_cleanup(hsotg, chan);
 744         list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
 745
 746         if (hsotg->core_params->uframe_sched > 0) {
 747                 hsotg->available_host_channels++;
 748         } else {
 749                 switch (chan->ep_type) {
 750                 case USB_ENDPOINT_XFER_CONTROL:
 751                 case USB_ENDPOINT_XFER_BULK:
 752                         hsotg->non_periodic_channels--;
 753                         break;
 754                 default:
 755                         /*
 756                          * Don't release reservations for periodic channels
 757                          * here. That's done when a periodic transfer is
 758                          * descheduled (i.e. when the QH is removed from the
 759                          * periodic schedule).
 760                          */
 761                         break;
 762                 }
 763         }
 764
 765         haintmsk = dwc2_readl(hsotg->regs + HAINTMSK);
 766         haintmsk &= ~(1 << chan->hc_num);
 767         dwc2_writel(haintmsk, hsotg->regs + HAINTMSK);
 768
 769         /* Try to queue more transfers now that there's a free channel */
 770         tr_type = dwc2_hcd_select_transactions(hsotg);
 771         if (tr_type != DWC2_TRANSACTION_NONE)
 772                 dwc2_hcd_queue_transactions(hsotg, tr_type);
 773 }
 774
 775 /*
 776  * Halts a host channel. If the channel cannot be halted immediately because
 777  * the request queue is full, this function ensures that the FIFO empty
 778  * interrupt for the appropriate queue is enabled so that the halt request can
 779  * be queued when there is space in the request queue.
 780  *
 781  * This function may also be called in DMA mode. In that case, the channel is
 782  * simply released since the core always halts the channel automatically in
 783  * DMA mode.
 784  */
 785 static void dwc2_halt_channel(struct dwc2_hsotg *hsotg,
 786                               struct dwc2_host_chan *chan, struct dwc2_qtd *qtd,
 787                               enum dwc2_halt_status halt_status)
 788 {
 789         if (dbg_hc(chan))
 790                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
 791
 792         if (hsotg->core_params->dma_enable > 0) {
 793                 if (dbg_hc(chan))
 794                         dev_vdbg(hsotg->dev, "DMA enabled\n");
 795                 dwc2_release_channel(hsotg, chan, qtd, halt_status);
 796                 return;
 797         }
 798
 799         /* Slave mode processing */
 800         dwc2_hc_halt(hsotg, chan, halt_status);
 801
 802         if (chan->halt_on_queue) {
 803                 u32 gintmsk;
 804
 805                 dev_vdbg(hsotg->dev, "Halt on queue\n");
 806                 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
 807                     chan->ep_type == USB_ENDPOINT_XFER_BULK) {
 808                         dev_vdbg(hsotg->dev, "control/bulk\n");
 809                         /*
 810                          * Make sure the Non-periodic Tx FIFO empty interrupt
 811                          * is enabled so that the non-periodic schedule will
 812                          * be processed
 813                          */
 814                         gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 815                         gintmsk |= GINTSTS_NPTXFEMP;
 816                         dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 817                 } else {
 818                         dev_vdbg(hsotg->dev, "isoc/intr\n");
 819                         /*
 820                          * Move the QH from the periodic queued schedule to
 821                          * the periodic assigned schedule. This allows the
 822                          * halt to be queued when the periodic schedule is
 823                          * processed.
 824                          */
 825                         list_move_tail(&chan->qh->qh_list_entry,
 826                                   &hsotg->periodic_sched_assigned);
 827
 828                         /*
 829                          * Make sure the Periodic Tx FIFO Empty interrupt is
 830                          * enabled so that the periodic schedule will be
 831                          * processed
 832                          */
 833                         gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 834                         gintmsk |= GINTSTS_PTXFEMP;
 835                         dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 836                 }
 837         }
 838 }
 839
 840 /*
 841  * Performs common cleanup for non-periodic transfers after a Transfer
 842  * Complete interrupt. This function should be called after any endpoint type
 843  * specific handling is finished to release the host channel.
 844  */
 845 static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg,
 846                                             struct dwc2_host_chan *chan,
 847                                             int chnum, struct dwc2_qtd *qtd,
 848                                             enum dwc2_halt_status halt_status)
 849 {
 850         dev_vdbg(hsotg->dev, "%s()\n", __func__);
 851
 852         qtd->error_count = 0;
 853
 854         if (chan->hcint & HCINTMSK_NYET) {
 855                 /*
 856                  * Got a NYET on the last transaction of the transfer. This
 857                  * means that the endpoint should be in the PING state at the
 858                  * beginning of the next transfer.
 859                  */
 860                 dev_vdbg(hsotg->dev, "got NYET\n");
 861                 chan->qh->ping_state = 1;
 862         }
 863
 864         /*
 865          * Always halt and release the host channel to make it available for
 866          * more transfers. There may still be more phases for a control
 867          * transfer or more data packets for a bulk transfer at this point,
 868          * but the host channel is still halted. A channel will be reassigned
 869          * to the transfer when the non-periodic schedule is processed after
 870          * the channel is released. This allows transactions to be queued
 871          * properly via dwc2_hcd_queue_transactions, which also enables the
 872          * Tx FIFO Empty interrupt if necessary.
 873          */
 874         if (chan->ep_is_in) {
 875                 /*
 876                  * IN transfers in Slave mode require an explicit disable to
 877                  * halt the channel. (In DMA mode, this call simply releases
 878                  * the channel.)
 879                  */
 880                 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
 881         } else {
 882                 /*
 883                  * The channel is automatically disabled by the core for OUT
 884                  * transfers in Slave mode
 885                  */
 886                 dwc2_release_channel(hsotg, chan, qtd, halt_status);
 887         }
 888 }
 889
 890 /*
 891  * Performs common cleanup for periodic transfers after a Transfer Complete
 892  * interrupt. This function should be called after any endpoint type specific
 893  * handling is finished to release the host channel.
 894  */
 895 static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg,
 896                                         struct dwc2_host_chan *chan, int chnum,
 897                                         struct dwc2_qtd *qtd,
 898                                         enum dwc2_halt_status halt_status)
 899 {
 900         u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
 901
 902         qtd->error_count = 0;
 903
 904         if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0)
 905                 /* Core halts channel in these cases */
 906                 dwc2_release_channel(hsotg, chan, qtd, halt_status);
 907         else
 908                 /* Flush any outstanding requests from the Tx queue */
 909                 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
 910 }
 911
 912 static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
 913                                        struct dwc2_host_chan *chan, int chnum,
 914                                        struct dwc2_qtd *qtd)
 915 {
 916         struct dwc2_hcd_iso_packet_desc *frame_desc;
 917         u32 len;
 918
 919         if (!qtd->urb)
 920                 return 0;
 921
 922         frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
 923         len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
 924                                           DWC2_HC_XFER_COMPLETE, NULL);
 925         if (!len) {
 926                 qtd->complete_split = 0;
 927                 qtd->isoc_split_offset = 0;
 928                 return 0;
 929         }
 930
 931         frame_desc->actual_length += len;
 932
 933         qtd->isoc_split_offset += len;
 934
 935         if (frame_desc->actual_length >= frame_desc->length) {
 936                 frame_desc->status = 0;
 937                 qtd->isoc_frame_index++;
 938                 qtd->complete_split = 0;
 939                 qtd->isoc_split_offset = 0;
 940         }
 941
 942         if (qtd->isoc_frame_index == qtd->urb->packet_count) {
 943                 dwc2_host_complete(hsotg, qtd, 0);
 944                 dwc2_release_channel(hsotg, chan, qtd,
 945                                      DWC2_HC_XFER_URB_COMPLETE);
 946         } else {
 947                 dwc2_release_channel(hsotg, chan, qtd,
 948                                      DWC2_HC_XFER_NO_HALT_STATUS);
 949         }
 950
 951         return 1;       /* Indicates that channel released */
 952 }
 953
 954 /*
 955  * Handles a host channel Transfer Complete interrupt. This handler may be
 956  * called in either DMA mode or Slave mode.
 957  */
 958 static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
 959                                   struct dwc2_host_chan *chan, int chnum,
 960                                   struct dwc2_qtd *qtd)
 961 {
 962         struct dwc2_hcd_urb *urb = qtd->urb;
 963         enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE;
 964         int pipe_type;
 965         int urb_xfer_done;
 966
 967         if (dbg_hc(chan))
 968                 dev_vdbg(hsotg->dev,
 969                          "--Host Channel %d Interrupt: Transfer Complete--\n",
 970                          chnum);
 971
 972         if (!urb)
 973                 goto handle_xfercomp_done;
 974
 975         pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
 976
 977         if (hsotg->core_params->dma_desc_enable > 0) {
 978                 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status);
 979                 if (pipe_type == USB_ENDPOINT_XFER_ISOC)
 980                         /* Do not disable the interrupt, just clear it */
 981                         return;
 982                 goto handle_xfercomp_done;
 983         }
 984
 985         /* Handle xfer complete on CSPLIT */
 986         if (chan->qh->do_split) {
 987                 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
 988                     hsotg->core_params->dma_enable > 0) {
 989                         if (qtd->complete_split &&
 990                             dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum,
 991                                                         qtd))
 992                                 goto handle_xfercomp_done;
 993                 } else {
 994                         qtd->complete_split = 0;
 995                 }
 996         }
 997
 998         /* Update the QTD and URB states */
 999         switch (pipe_type) {
1000         case USB_ENDPOINT_XFER_CONTROL:
1001                 switch (qtd->control_phase) {
1002                 case DWC2_CONTROL_SETUP:
1003                         if (urb->length > 0)
1004                                 qtd->control_phase = DWC2_CONTROL_DATA;
1005                         else
1006                                 qtd->control_phase = DWC2_CONTROL_STATUS;
1007                         dev_vdbg(hsotg->dev,
1008                                  "  Control setup transaction done\n");
1009                         halt_status = DWC2_HC_XFER_COMPLETE;
1010                         break;
1011                 case DWC2_CONTROL_DATA:
1012                         urb_xfer_done = dwc2_update_urb_state(hsotg, chan,
1013                                                               chnum, urb, qtd);
1014                         if (urb_xfer_done) {
1015                                 qtd->control_phase = DWC2_CONTROL_STATUS;
1016                                 dev_vdbg(hsotg->dev,
1017                                          "  Control data transfer done\n");
1018                         } else {
1019                                 dwc2_hcd_save_data_toggle(hsotg, chan, chnum,
1020                                                           qtd);
1021                         }
1022                         halt_status = DWC2_HC_XFER_COMPLETE;
1023                         break;
1024                 case DWC2_CONTROL_STATUS:
1025                         dev_vdbg(hsotg->dev, "  Control transfer complete\n");
1026                         if (urb->status == -EINPROGRESS)
1027                                 urb->status = 0;
1028                         dwc2_host_complete(hsotg, qtd, urb->status);
1029                         halt_status = DWC2_HC_XFER_URB_COMPLETE;
1030                         break;
1031                 }
1032
1033                 dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
1034                                                 halt_status);
1035                 break;
1036         case USB_ENDPOINT_XFER_BULK:
1037                 dev_vdbg(hsotg->dev, "  Bulk transfer complete\n");
1038                 urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
1039                                                       qtd);
1040                 if (urb_xfer_done) {
1041                         dwc2_host_complete(hsotg, qtd, urb->status);
1042                         halt_status = DWC2_HC_XFER_URB_COMPLETE;
1043                 } else {
1044                         halt_status = DWC2_HC_XFER_COMPLETE;
1045                 }
1046
1047                 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1048                 dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
1049                                                 halt_status);
1050                 break;
1051         case USB_ENDPOINT_XFER_INT:
1052                 dev_vdbg(hsotg->dev, "  Interrupt transfer complete\n");
1053                 urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
1054                                                       qtd);
1055
1056                 /*
1057                  * Interrupt URB is done on the first transfer complete
1058                  * interrupt
1059                  */
1060                 if (urb_xfer_done) {
1061                         dwc2_host_complete(hsotg, qtd, urb->status);
1062                         halt_status = DWC2_HC_XFER_URB_COMPLETE;
1063                 } else {
1064                         halt_status = DWC2_HC_XFER_COMPLETE;
1065                 }
1066
1067                 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1068                 dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
1069                                             halt_status);
1070                 break;
1071         case USB_ENDPOINT_XFER_ISOC:
1072                 if (dbg_perio())
1073                         dev_vdbg(hsotg->dev, "  Isochronous transfer complete\n");
1074                 if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL)
1075                         halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
1076                                         chnum, qtd, DWC2_HC_XFER_COMPLETE);
1077                 dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
1078                                             halt_status);
1079                 break;
1080         }
1081
1082 handle_xfercomp_done:
1083         disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL);
1084 }
1085
1086 /*
1087  * Handles a host channel STALL interrupt. This handler may be called in
1088  * either DMA mode or Slave mode.
1089  */
1090 static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
1091                                struct dwc2_host_chan *chan, int chnum,
1092                                struct dwc2_qtd *qtd)
1093 {
1094         struct dwc2_hcd_urb *urb = qtd->urb;
1095         int pipe_type;
1096
1097         dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n",
1098                 chnum);
1099
1100         if (hsotg->core_params->dma_desc_enable > 0) {
1101                 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1102                                             DWC2_HC_XFER_STALL);
1103                 goto handle_stall_done;
1104         }
1105
1106         if (!urb)
1107                 goto handle_stall_halt;
1108
1109         pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
1110
1111         if (pipe_type == USB_ENDPOINT_XFER_CONTROL)
1112                 dwc2_host_complete(hsotg, qtd, -EPIPE);
1113
1114         if (pipe_type == USB_ENDPOINT_XFER_BULK ||
1115             pipe_type == USB_ENDPOINT_XFER_INT) {
1116                 dwc2_host_complete(hsotg, qtd, -EPIPE);
1117                 /*
1118                  * USB protocol requires resetting the data toggle for bulk
1119                  * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
1120                  * setup command is issued to the endpoint. Anticipate the
1121                  * CLEAR_FEATURE command since a STALL has occurred and reset
1122                  * the data toggle now.
1123                  */
1124                 chan->qh->data_toggle = 0;
1125         }
1126
1127 handle_stall_halt:
1128         dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL);
1129
1130 handle_stall_done:
1131         disable_hc_int(hsotg, chnum, HCINTMSK_STALL);
1132 }
1133
1134 /*
1135  * Updates the state of the URB when a transfer has been stopped due to an
1136  * abnormal condition before the transfer completes. Modifies the
1137  * actual_length field of the URB to reflect the number of bytes that have
1138  * actually been transferred via the host channel.
1139  */
1140 static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg,
1141                                       struct dwc2_host_chan *chan, int chnum,
1142                                       struct dwc2_hcd_urb *urb,
1143                                       struct dwc2_qtd *qtd,
1144                                       enum dwc2_halt_status halt_status)
1145 {
1146         u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum,
1147                                                       qtd, halt_status, NULL);
1148         u32 hctsiz;
1149
1150         if (urb->actual_length + xfer_length > urb->length) {
1151                 dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
1152                 xfer_length = urb->length - urb->actual_length;
1153         }
1154
1155         urb->actual_length += xfer_length;
1156
1157         hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1158         dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
1159                  __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
1160         dev_vdbg(hsotg->dev, "  chan->start_pkt_count %d\n",
1161                  chan->start_pkt_count);
1162         dev_vdbg(hsotg->dev, "  hctsiz.pktcnt %d\n",
1163                  (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT);
1164         dev_vdbg(hsotg->dev, "  chan->max_packet %d\n", chan->max_packet);
1165         dev_vdbg(hsotg->dev, "  bytes_transferred %d\n",
1166                  xfer_length);
1167         dev_vdbg(hsotg->dev, "  urb->actual_length %d\n",
1168                  urb->actual_length);
1169         dev_vdbg(hsotg->dev, "  urb->transfer_buffer_length %d\n",
1170                  urb->length);
1171 }
1172
1173 /*
1174  * Handles a host channel NAK interrupt. This handler may be called in either
1175  * DMA mode or Slave mode.
1176  */
1177 static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
1178                              struct dwc2_host_chan *chan, int chnum,
1179                              struct dwc2_qtd *qtd)
1180 {
1181         if (!qtd) {
1182                 dev_dbg(hsotg->dev, "%s: qtd is NULL\n", __func__);
1183                 return;
1184         }
1185
1186         if (!qtd->urb) {
1187                 dev_dbg(hsotg->dev, "%s: qtd->urb is NULL\n", __func__);
1188                 return;
1189         }
1190
1191         if (dbg_hc(chan))
1192                 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n",
1193                          chnum);
1194
1195         /*
1196          * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
1197          * interrupt. Re-start the SSPLIT transfer.
1198          */
1199         if (chan->do_split) {
1200                 if (chan->complete_split)
1201                         qtd->error_count = 0;
1202                 qtd->complete_split = 0;
1203                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1204                 goto handle_nak_done;
1205         }
1206
1207         switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1208         case USB_ENDPOINT_XFER_CONTROL:
1209         case USB_ENDPOINT_XFER_BULK:
1210                 if (hsotg->core_params->dma_enable > 0 && chan->ep_is_in) {
1211                         /*
1212                          * NAK interrupts are enabled on bulk/control IN
1213                          * transfers in DMA mode for the sole purpose of
1214                          * resetting the error count after a transaction error
1215                          * occurs. The core will continue transferring data.
1216                          */
1217                         qtd->error_count = 0;
1218                         break;
1219                 }
1220
1221                 /*
1222                  * NAK interrupts normally occur during OUT transfers in DMA
1223                  * or Slave mode. For IN transfers, more requests will be
1224                  * queued as request queue space is available.
1225                  */
1226                 qtd->error_count = 0;
1227
1228                 if (!chan->qh->ping_state) {
1229                         dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1230                                                   qtd, DWC2_HC_XFER_NAK);
1231                         dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1232
1233                         if (chan->speed == USB_SPEED_HIGH)
1234                                 chan->qh->ping_state = 1;
1235                 }
1236
1237                 /*
1238                  * Halt the channel so the transfer can be re-started from
1239                  * the appropriate point or the PING protocol will
1240                  * start/continue
1241                  */
1242                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1243                 break;
1244         case USB_ENDPOINT_XFER_INT:
1245                 qtd->error_count = 0;
1246                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
1247                 break;
1248         case USB_ENDPOINT_XFER_ISOC:
1249                 /* Should never get called for isochronous transfers */
1250                 dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n");
1251                 break;
1252         }
1253
1254 handle_nak_done:
1255         disable_hc_int(hsotg, chnum, HCINTMSK_NAK);
1256 }
1257
1258 /*
1259  * Handles a host channel ACK interrupt. This interrupt is enabled when
1260  * performing the PING protocol in Slave mode, when errors occur during
1261  * either Slave mode or DMA mode, and during Start Split transactions.
1262  */
1263 static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg,
1264                              struct dwc2_host_chan *chan, int chnum,
1265                              struct dwc2_qtd *qtd)
1266 {
1267         struct dwc2_hcd_iso_packet_desc *frame_desc;
1268
1269         if (dbg_hc(chan))
1270                 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n",
1271                          chnum);
1272
1273         if (chan->do_split) {
1274                 /* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */
1275                 if (!chan->ep_is_in &&
1276                     chan->data_pid_start != DWC2_HC_PID_SETUP)
1277                         qtd->ssplit_out_xfer_count = chan->xfer_len;
1278
1279                 if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) {
1280                         qtd->complete_split = 1;
1281                         dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
1282                 } else {
1283                         /* ISOC OUT */
1284                         switch (chan->xact_pos) {
1285                         case DWC2_HCSPLT_XACTPOS_ALL:
1286                                 break;
1287                         case DWC2_HCSPLT_XACTPOS_END:
1288                                 qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
1289                                 qtd->isoc_split_offset = 0;
1290                                 break;
1291                         case DWC2_HCSPLT_XACTPOS_BEGIN:
1292                         case DWC2_HCSPLT_XACTPOS_MID:
1293                                 /*
1294                                  * For BEGIN or MID, calculate the length for
1295                                  * the next microframe to determine the correct
1296                                  * SSPLIT token, either MID or END
1297                                  */
1298                                 frame_desc = &qtd->urb->iso_descs[
1299                                                 qtd->isoc_frame_index];
1300                                 qtd->isoc_split_offset += 188;
1301
1302                                 if (frame_desc->length - qtd->isoc_split_offset
1303                                                         <= 188)
1304                                         qtd->isoc_split_pos =
1305                                                         DWC2_HCSPLT_XACTPOS_END;
1306                                 else
1307                                         qtd->isoc_split_pos =
1308                                                         DWC2_HCSPLT_XACTPOS_MID;
1309                                 break;
1310                         }
1311                 }
1312         } else {
1313                 qtd->error_count = 0;
1314
1315                 if (chan->qh->ping_state) {
1316                         chan->qh->ping_state = 0;
1317                         /*
1318                          * Halt the channel so the transfer can be re-started
1319                          * from the appropriate point. This only happens in
1320                          * Slave mode. In DMA mode, the ping_state is cleared
1321                          * when the transfer is started because the core
1322                          * automatically executes the PING, then the transfer.
1323                          */
1324                         dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
1325                 }
1326         }
1327
1328         /*
1329          * If the ACK occurred when _not_ in the PING state, let the channel
1330          * continue transferring data after clearing the error count
1331          */
1332         disable_hc_int(hsotg, chnum, HCINTMSK_ACK);
1333 }
1334
1335 /*
1336  * Handles a host channel NYET interrupt. This interrupt should only occur on
1337  * Bulk and Control OUT endpoints and for complete split transactions. If a
1338  * NYET occurs at the same time as a Transfer Complete interrupt, it is
1339  * handled in the xfercomp interrupt handler, not here. This handler may be
1340  * called in either DMA mode or Slave mode.
1341  */
1342 static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg,
1343                               struct dwc2_host_chan *chan, int chnum,
1344                               struct dwc2_qtd *qtd)
1345 {
1346         if (dbg_hc(chan))
1347                 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n",
1348                          chnum);
1349
1350         /*
1351          * NYET on CSPLIT
1352          * re-do the CSPLIT immediately on non-periodic
1353          */
1354         if (chan->do_split && chan->complete_split) {
1355                 if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC &&
1356                     hsotg->core_params->dma_enable > 0) {
1357                         qtd->complete_split = 0;
1358                         qtd->isoc_split_offset = 0;
1359                         qtd->isoc_frame_index++;
1360                         if (qtd->urb &&
1361                             qtd->isoc_frame_index == qtd->urb->packet_count) {
1362                                 dwc2_host_complete(hsotg, qtd, 0);
1363                                 dwc2_release_channel(hsotg, chan, qtd,
1364                                                      DWC2_HC_XFER_URB_COMPLETE);
1365                         } else {
1366                                 dwc2_release_channel(hsotg, chan, qtd,
1367                                                 DWC2_HC_XFER_NO_HALT_STATUS);
1368                         }
1369                         goto handle_nyet_done;
1370                 }
1371
1372                 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1373                     chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1374                         struct dwc2_qh *qh = chan->qh;
1375                         bool past_end;
1376
1377                         if (hsotg->core_params->uframe_sched <= 0) {
1378                                 int frnum = dwc2_hcd_get_frame_number(hsotg);
1379
1380                                 /* Don't have num_hs_transfers; simple logic */
1381                                 past_end = dwc2_full_frame_num(frnum) !=
1382                                      dwc2_full_frame_num(qh->next_active_frame);
1383                         } else {
1384                                 int end_frnum;
1385
1386                                 /*
1387                                 * Figure out the end frame based on schedule.
1388                                 *
1389                                 * We don't want to go on trying again and again
1390                                 * forever.  Let's stop when we've done all the
1391                                 * transfers that were scheduled.
1392                                 *
1393                                 * We're going to be comparing start_active_frame
1394                                 * and next_active_frame, both of which are 1
1395                                 * before the time the packet goes on the wire,
1396                                 * so that cancels out.  Basically if had 1
1397                                 * transfer and we saw 1 NYET then we're done.
1398                                 * We're getting a NYET here so if next >=
1399                                 * (start + num_transfers) we're done. The
1400                                 * complexity is that for all but ISOC_OUT we
1401                                 * skip one slot.
1402                                 */
1403                                 end_frnum = dwc2_frame_num_inc(
1404                                         qh->start_active_frame,
1405                                         qh->num_hs_transfers);
1406
1407                                 if (qh->ep_type != USB_ENDPOINT_XFER_ISOC ||
1408                                     qh->ep_is_in)
1409                                         end_frnum =
1410                                                dwc2_frame_num_inc(end_frnum, 1);
1411
1412                                 past_end = dwc2_frame_num_le(
1413                                         end_frnum, qh->next_active_frame);
1414                         }
1415
1416                         if (past_end) {
1417                                 /* Treat this as a transaction error. */
1418 #if 0
1419                                 /*
1420                                  * Todo: Fix system performance so this can
1421                                  * be treated as an error. Right now complete
1422                                  * splits cannot be scheduled precisely enough
1423                                  * due to other system activity, so this error
1424                                  * occurs regularly in Slave mode.
1425                                  */
1426                                 qtd->error_count++;
1427 #endif
1428                                 qtd->complete_split = 0;
1429                                 dwc2_halt_channel(hsotg, chan, qtd,
1430                                                   DWC2_HC_XFER_XACT_ERR);
1431                                 /* Todo: add support for isoc release */
1432                                 goto handle_nyet_done;
1433                         }
1434                 }
1435
1436                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
1437                 goto handle_nyet_done;
1438         }
1439
1440         chan->qh->ping_state = 1;
1441         qtd->error_count = 0;
1442
1443         dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd,
1444                                   DWC2_HC_XFER_NYET);
1445         dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1446
1447         /*
1448          * Halt the channel and re-start the transfer so the PING protocol
1449          * will start
1450          */
1451         dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
1452
1453 handle_nyet_done:
1454         disable_hc_int(hsotg, chnum, HCINTMSK_NYET);
1455 }
1456
1457 /*
1458  * Handles a host channel babble interrupt. This handler may be called in
1459  * either DMA mode or Slave mode.
1460  */
1461 static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg,
1462                                 struct dwc2_host_chan *chan, int chnum,
1463                                 struct dwc2_qtd *qtd)
1464 {
1465         dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n",
1466                 chnum);
1467
1468         dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1469
1470         if (hsotg->core_params->dma_desc_enable > 0) {
1471                 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1472                                             DWC2_HC_XFER_BABBLE_ERR);
1473                 goto disable_int;
1474         }
1475
1476         if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
1477                 dwc2_host_complete(hsotg, qtd, -EOVERFLOW);
1478                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR);
1479         } else {
1480                 enum dwc2_halt_status halt_status;
1481
1482                 halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
1483                                                 qtd, DWC2_HC_XFER_BABBLE_ERR);
1484                 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1485         }
1486
1487 disable_int:
1488         disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR);
1489 }
1490
1491 /*
1492  * Handles a host channel AHB error interrupt. This handler is only called in
1493  * DMA mode.
1494  */
1495 static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
1496                                 struct dwc2_host_chan *chan, int chnum,
1497                                 struct dwc2_qtd *qtd)
1498 {
1499         struct dwc2_hcd_urb *urb = qtd->urb;
1500         char *pipetype, *speed;
1501         u32 hcchar;
1502         u32 hcsplt;
1503         u32 hctsiz;
1504         u32 hc_dma;
1505
1506         dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n",
1507                 chnum);
1508
1509         if (!urb)
1510                 goto handle_ahberr_halt;
1511
1512         dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1513
1514         hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1515         hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
1516         hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1517         hc_dma = dwc2_readl(hsotg->regs + HCDMA(chnum));
1518
1519         dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
1520         dev_err(hsotg->dev, "  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
1521         dev_err(hsotg->dev, "  hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma);
1522         dev_err(hsotg->dev, "  Device address: %d\n",
1523                 dwc2_hcd_get_dev_addr(&urb->pipe_info));
1524         dev_err(hsotg->dev, "  Endpoint: %d, %s\n",
1525                 dwc2_hcd_get_ep_num(&urb->pipe_info),
1526                 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
1527
1528         switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
1529         case USB_ENDPOINT_XFER_CONTROL:
1530                 pipetype = "CONTROL";
1531                 break;
1532         case USB_ENDPOINT_XFER_BULK:
1533                 pipetype = "BULK";
1534                 break;
1535         case USB_ENDPOINT_XFER_INT:
1536                 pipetype = "INTERRUPT";
1537                 break;
1538         case USB_ENDPOINT_XFER_ISOC:
1539                 pipetype = "ISOCHRONOUS";
1540                 break;
1541         default:
1542                 pipetype = "UNKNOWN";
1543                 break;
1544         }
1545
1546         dev_err(hsotg->dev, "  Endpoint type: %s\n", pipetype);
1547
1548         switch (chan->speed) {
1549         case USB_SPEED_HIGH:
1550                 speed = "HIGH";
1551                 break;
1552         case USB_SPEED_FULL:
1553                 speed = "FULL";
1554                 break;
1555         case USB_SPEED_LOW:
1556                 speed = "LOW";
1557                 break;
1558         default:
1559                 speed = "UNKNOWN";
1560                 break;
1561         }
1562
1563         dev_err(hsotg->dev, "  Speed: %s\n", speed);
1564
1565         dev_err(hsotg->dev, "  Max packet size: %d\n",
1566                 dwc2_hcd_get_mps(&urb->pipe_info));
1567         dev_err(hsotg->dev, "  Data buffer length: %d\n", urb->length);
1568         dev_err(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
1569                 urb->buf, (unsigned long)urb->dma);
1570         dev_err(hsotg->dev, "  Setup buffer: %p, Setup DMA: %08lx\n",
1571                 urb->setup_packet, (unsigned long)urb->setup_dma);
1572         dev_err(hsotg->dev, "  Interval: %d\n", urb->interval);
1573
1574         /* Core halts the channel for Descriptor DMA mode */
1575         if (hsotg->core_params->dma_desc_enable > 0) {
1576                 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1577                                             DWC2_HC_XFER_AHB_ERR);
1578                 goto handle_ahberr_done;
1579         }
1580
1581         dwc2_host_complete(hsotg, qtd, -EIO);
1582
1583 handle_ahberr_halt:
1584         /*
1585          * Force a channel halt. Don't call dwc2_halt_channel because that won't
1586          * write to the HCCHARn register in DMA mode to force the halt.
1587          */
1588         dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR);
1589
1590 handle_ahberr_done:
1591         disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR);
1592 }
1593
1594 /*
1595  * Handles a host channel transaction error interrupt. This handler may be
1596  * called in either DMA mode or Slave mode.
1597  */
1598 static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg,
1599                                  struct dwc2_host_chan *chan, int chnum,
1600                                  struct dwc2_qtd *qtd)
1601 {
1602         dev_dbg(hsotg->dev,
1603                 "--Host Channel %d Interrupt: Transaction Error--\n", chnum);
1604
1605         dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1606
1607         if (hsotg->core_params->dma_desc_enable > 0) {
1608                 dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1609                                             DWC2_HC_XFER_XACT_ERR);
1610                 goto handle_xacterr_done;
1611         }
1612
1613         switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1614         case USB_ENDPOINT_XFER_CONTROL:
1615         case USB_ENDPOINT_XFER_BULK:
1616                 qtd->error_count++;
1617                 if (!chan->qh->ping_state) {
1618
1619                         dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1620                                                   qtd, DWC2_HC_XFER_XACT_ERR);
1621                         dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1622                         if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH)
1623                                 chan->qh->ping_state = 1;
1624                 }
1625
1626                 /*
1627                  * Halt the channel so the transfer can be re-started from
1628                  * the appropriate point or the PING protocol will start
1629                  */
1630                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1631                 break;
1632         case USB_ENDPOINT_XFER_INT:
1633                 qtd->error_count++;
1634                 if (chan->do_split && chan->complete_split)
1635                         qtd->complete_split = 0;
1636                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1637                 break;
1638         case USB_ENDPOINT_XFER_ISOC:
1639                 {
1640                         enum dwc2_halt_status halt_status;
1641
1642                         halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
1643                                         chnum, qtd, DWC2_HC_XFER_XACT_ERR);
1644                         dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1645                 }
1646                 break;
1647         }
1648
1649 handle_xacterr_done:
1650         disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR);
1651 }
1652
1653 /*
1654  * Handles a host channel frame overrun interrupt. This handler may be called
1655  * in either DMA mode or Slave mode.
1656  */
1657 static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg,
1658                                   struct dwc2_host_chan *chan, int chnum,
1659                                   struct dwc2_qtd *qtd)
1660 {
1661         enum dwc2_halt_status halt_status;
1662
1663         if (dbg_hc(chan))
1664                 dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n",
1665                         chnum);
1666
1667         dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1668
1669         switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
1670         case USB_ENDPOINT_XFER_CONTROL:
1671         case USB_ENDPOINT_XFER_BULK:
1672                 break;
1673         case USB_ENDPOINT_XFER_INT:
1674                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN);
1675                 break;
1676         case USB_ENDPOINT_XFER_ISOC:
1677                 halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
1678                                         qtd, DWC2_HC_XFER_FRAME_OVERRUN);
1679                 dwc2_halt_channel(hsotg, chan, qtd, halt_status);
1680                 break;
1681         }
1682
1683         disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN);
1684 }
1685
1686 /*
1687  * Handles a host channel data toggle error interrupt. This handler may be
1688  * called in either DMA mode or Slave mode.
1689  */
1690 static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg,
1691                                     struct dwc2_host_chan *chan, int chnum,
1692                                     struct dwc2_qtd *qtd)
1693 {
1694         dev_dbg(hsotg->dev,
1695                 "--Host Channel %d Interrupt: Data Toggle Error--\n", chnum);
1696
1697         if (chan->ep_is_in)
1698                 qtd->error_count = 0;
1699         else
1700                 dev_err(hsotg->dev,
1701                         "Data Toggle Error on OUT transfer, channel %d\n",
1702                         chnum);
1703
1704         dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
1705         disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR);
1706 }
1707
1708 /*
1709  * For debug only. It checks that a valid halt status is set and that
1710  * HCCHARn.chdis is clear. If there's a problem, corrective action is
1711  * taken and a warning is issued.
1712  *
1713  * Return: true if halt status is ok, false otherwise
1714  */
1715 static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg,
1716                                 struct dwc2_host_chan *chan, int chnum,
1717                                 struct dwc2_qtd *qtd)
1718 {
1719 #ifdef DEBUG
1720         u32 hcchar;
1721         u32 hctsiz;
1722         u32 hcintmsk;
1723         u32 hcsplt;
1724
1725         if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) {
1726                 /*
1727                  * This code is here only as a check. This condition should
1728                  * never happen. Ignore the halt if it does occur.
1729                  */
1730                 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1731                 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
1732                 hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1733                 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum));
1734                 dev_dbg(hsotg->dev,
1735                         "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
1736                          __func__);
1737                 dev_dbg(hsotg->dev,
1738                         "channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n",
1739                         chnum, hcchar, hctsiz);
1740                 dev_dbg(hsotg->dev,
1741                         "hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n",
1742                         chan->hcint, hcintmsk, hcsplt);
1743                 if (qtd)
1744                         dev_dbg(hsotg->dev, "qtd->complete_split %d\n",
1745                                 qtd->complete_split);
1746                 dev_warn(hsotg->dev,
1747                          "%s: no halt status, channel %d, ignoring interrupt\n",
1748                          __func__, chnum);
1749                 return false;
1750         }
1751
1752         /*
1753          * This code is here only as a check. hcchar.chdis should never be set
1754          * when the halt interrupt occurs. Halt the channel again if it does
1755          * occur.
1756          */
1757         hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum));
1758         if (hcchar & HCCHAR_CHDIS) {
1759                 dev_warn(hsotg->dev,
1760                          "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
1761                          __func__, hcchar);
1762                 chan->halt_pending = 0;
1763                 dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status);
1764                 return false;
1765         }
1766 #endif
1767
1768         return true;
1769 }
1770
1771 /*
1772  * Handles a host Channel Halted interrupt in DMA mode. This handler
1773  * determines the reason the channel halted and proceeds accordingly.
1774  */
1775 static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg,
1776                                     struct dwc2_host_chan *chan, int chnum,
1777                                     struct dwc2_qtd *qtd)
1778 {
1779         u32 hcintmsk;
1780         int out_nak_enh = 0;
1781
1782         if (dbg_hc(chan))
1783                 dev_vdbg(hsotg->dev,
1784                          "--Host Channel %d Interrupt: DMA Channel Halted--\n",
1785                          chnum);
1786
1787         /*
1788          * For core with OUT NAK enhancement, the flow for high-speed
1789          * CONTROL/BULK OUT is handled a little differently
1790          */
1791         if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_71a) {
1792                 if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in &&
1793                     (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
1794                      chan->ep_type == USB_ENDPOINT_XFER_BULK)) {
1795                         out_nak_enh = 1;
1796                 }
1797         }
1798
1799         if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
1800             (chan->halt_status == DWC2_HC_XFER_AHB_ERR &&
1801              hsotg->core_params->dma_desc_enable <= 0)) {
1802                 if (hsotg->core_params->dma_desc_enable > 0)
1803                         dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
1804                                                     chan->halt_status);
1805                 else
1806                         /*
1807                          * Just release the channel. A dequeue can happen on a
1808                          * transfer timeout. In the case of an AHB Error, the
1809                          * channel was forced to halt because there's no way to
1810                          * gracefully recover.
1811                          */
1812                         dwc2_release_channel(hsotg, chan, qtd,
1813                                              chan->halt_status);
1814                 return;
1815         }
1816
1817         hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1818
1819         if (chan->hcint & HCINTMSK_XFERCOMPL) {
1820                 /*
1821                  * Todo: This is here because of a possible hardware bug. Spec
1822                  * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
1823                  * interrupt w/ACK bit set should occur, but I only see the
1824                  * XFERCOMP bit, even with it masked out. This is a workaround
1825                  * for that behavior. Should fix this when hardware is fixed.
1826                  */
1827                 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in)
1828                         dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
1829                 dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
1830         } else if (chan->hcint & HCINTMSK_STALL) {
1831                 dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
1832         } else if ((chan->hcint & HCINTMSK_XACTERR) &&
1833                    hsotg->core_params->dma_desc_enable <= 0) {
1834                 if (out_nak_enh) {
1835                         if (chan->hcint &
1836                             (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) {
1837                                 dev_vdbg(hsotg->dev,
1838                                          "XactErr with NYET/NAK/ACK\n");
1839                                 qtd->error_count = 0;
1840                         } else {
1841                                 dev_vdbg(hsotg->dev,
1842                                          "XactErr without NYET/NAK/ACK\n");
1843                         }
1844                 }
1845
1846                 /*
1847                  * Must handle xacterr before nak or ack. Could get a xacterr
1848                  * at the same time as either of these on a BULK/CONTROL OUT
1849                  * that started with a PING. The xacterr takes precedence.
1850                  */
1851                 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
1852         } else if ((chan->hcint & HCINTMSK_XCS_XACT) &&
1853                    hsotg->core_params->dma_desc_enable > 0) {
1854                 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
1855         } else if ((chan->hcint & HCINTMSK_AHBERR) &&
1856                    hsotg->core_params->dma_desc_enable > 0) {
1857                 dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
1858         } else if (chan->hcint & HCINTMSK_BBLERR) {
1859                 dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
1860         } else if (chan->hcint & HCINTMSK_FRMOVRUN) {
1861                 dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
1862         } else if (!out_nak_enh) {
1863                 if (chan->hcint & HCINTMSK_NYET) {
1864                         /*
1865                          * Must handle nyet before nak or ack. Could get a nyet
1866                          * at the same time as either of those on a BULK/CONTROL
1867                          * OUT that started with a PING. The nyet takes
1868                          * precedence.
1869                          */
1870                         dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
1871                 } else if ((chan->hcint & HCINTMSK_NAK) &&
1872                            !(hcintmsk & HCINTMSK_NAK)) {
1873                         /*
1874                          * If nak is not masked, it's because a non-split IN
1875                          * transfer is in an error state. In that case, the nak
1876                          * is handled by the nak interrupt handler, not here.
1877                          * Handle nak here for BULK/CONTROL OUT transfers, which
1878                          * halt on a NAK to allow rewinding the buffer pointer.
1879                          */
1880                         dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
1881                 } else if ((chan->hcint & HCINTMSK_ACK) &&
1882                            !(hcintmsk & HCINTMSK_ACK)) {
1883                         /*
1884                          * If ack is not masked, it's because a non-split IN
1885                          * transfer is in an error state. In that case, the ack
1886                          * is handled by the ack interrupt handler, not here.
1887                          * Handle ack here for split transfers. Start splits
1888                          * halt on ACK.
1889                          */
1890                         dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
1891                 } else {
1892                         if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1893                             chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1894                                 /*
1895                                  * A periodic transfer halted with no other
1896                                  * channel interrupts set. Assume it was halted
1897                                  * by the core because it could not be completed
1898                                  * in its scheduled (micro)frame.
1899                                  */
1900                                 dev_dbg(hsotg->dev,
1901                                         "%s: Halt channel %d (assume incomplete periodic transfer)\n",
1902                                         __func__, chnum);
1903                                 dwc2_halt_channel(hsotg, chan, qtd,
1904                                         DWC2_HC_XFER_PERIODIC_INCOMPLETE);
1905                         } else {
1906                                 dev_err(hsotg->dev,
1907                                         "%s: Channel %d - ChHltd set, but reason is unknown\n",
1908                                         __func__, chnum);
1909                                 dev_err(hsotg->dev,
1910                                         "hcint 0x%08x, intsts 0x%08x\n",
1911                                         chan->hcint,
1912                                         dwc2_readl(hsotg->regs + GINTSTS));
1913                                 goto error;
1914                         }
1915                 }
1916         } else {
1917                 dev_info(hsotg->dev,
1918                          "NYET/NAK/ACK/other in non-error case, 0x%08x\n",
1919                          chan->hcint);
1920 error:
1921                 /* Failthrough: use 3-strikes rule */
1922                 qtd->error_count++;
1923                 dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
1924                                           qtd, DWC2_HC_XFER_XACT_ERR);
1925                 dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
1926                 dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
1927         }
1928 }
1929
1930 /*
1931  * Handles a host channel Channel Halted interrupt
1932  *
1933  * In slave mode, this handler is called only when the driver specifically
1934  * requests a halt. This occurs during handling other host channel interrupts
1935  * (e.g. nak, xacterr, stall, nyet, etc.).
1936  *
1937  * In DMA mode, this is the interrupt that occurs when the core has finished
1938  * processing a transfer on a channel. Other host channel interrupts (except
1939  * ahberr) are disabled in DMA mode.
1940  */
1941 static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg,
1942                                 struct dwc2_host_chan *chan, int chnum,
1943                                 struct dwc2_qtd *qtd)
1944 {
1945         if (dbg_hc(chan))
1946                 dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n",
1947                          chnum);
1948
1949         if (hsotg->core_params->dma_enable > 0) {
1950                 dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd);
1951         } else {
1952                 if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd))
1953                         return;
1954                 dwc2_release_channel(hsotg, chan, qtd, chan->halt_status);
1955         }
1956 }
1957
1958 /*
1959  * Check if the given qtd is still the top of the list (and thus valid).
1960  *
1961  * If dwc2_hcd_qtd_unlink_and_free() has been called since we grabbed
1962  * the qtd from the top of the list, this will return false (otherwise true).
1963  */
1964 static bool dwc2_check_qtd_still_ok(struct dwc2_qtd *qtd, struct dwc2_qh *qh)
1965 {
1966         struct dwc2_qtd *cur_head;
1967
1968         if (qh == NULL)
1969                 return false;
1970
1971         cur_head = list_first_entry(&qh->qtd_list, struct dwc2_qtd,
1972                                     qtd_list_entry);
1973         return (cur_head == qtd);
1974 }
1975
1976 /* Handles interrupt for a specific Host Channel */
1977 static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
1978 {
1979         struct dwc2_qtd *qtd;
1980         struct dwc2_host_chan *chan;
1981         u32 hcint, hcintmsk;
1982
1983         chan = hsotg->hc_ptr_array[chnum];
1984
1985         hcint = dwc2_readl(hsotg->regs + HCINT(chnum));
1986         hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
1987         if (!chan) {
1988                 dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
1989                 dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
1990                 return;
1991         }
1992
1993         if (dbg_hc(chan)) {
1994                 dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n",
1995                          chnum);
1996                 dev_vdbg(hsotg->dev,
1997                          "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
1998                          hcint, hcintmsk, hcint & hcintmsk);
1999         }
2000
2001         dwc2_writel(hcint, hsotg->regs + HCINT(chnum));
2002
2003         /*
2004          * If we got an interrupt after someone called
2005          * dwc2_hcd_endpoint_disable() we don't want to crash below
2006          */
2007         if (!chan->qh) {
2008                 dev_warn(hsotg->dev, "Interrupt on disabled channel\n");
2009                 return;
2010         }
2011
2012         chan->hcint = hcint;
2013         hcint &= hcintmsk;
2014
2015         /*
2016          * If the channel was halted due to a dequeue, the qtd list might
2017          * be empty or at least the first entry will not be the active qtd.
2018          * In this case, take a shortcut and just release the channel.
2019          */
2020         if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) {
2021                 /*
2022                  * If the channel was halted, this should be the only
2023                  * interrupt unmasked
2024                  */
2025                 WARN_ON(hcint != HCINTMSK_CHHLTD);
2026                 if (hsotg->core_params->dma_desc_enable > 0)
2027                         dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
2028                                                     chan->halt_status);
2029                 else
2030                         dwc2_release_channel(hsotg, chan, NULL,
2031                                              chan->halt_status);
2032                 return;
2033         }
2034
2035         if (list_empty(&chan->qh->qtd_list)) {
2036                 /*
2037                  * TODO: Will this ever happen with the
2038                  * DWC2_HC_XFER_URB_DEQUEUE handling above?
2039                  */
2040                 dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n",
2041                         chnum);
2042                 dev_dbg(hsotg->dev,
2043                         "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
2044                         chan->hcint, hcintmsk, hcint);
2045                 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
2046                 disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD);
2047                 chan->hcint = 0;
2048                 return;
2049         }
2050
2051         qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd,
2052                                qtd_list_entry);
2053
2054         if (hsotg->core_params->dma_enable <= 0) {
2055                 if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD)
2056                         hcint &= ~HCINTMSK_CHHLTD;
2057         }
2058
2059         if (hcint & HCINTMSK_XFERCOMPL) {
2060                 dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
2061                 /*
2062                  * If NYET occurred at same time as Xfer Complete, the NYET is
2063                  * handled by the Xfer Complete interrupt handler. Don't want
2064                  * to call the NYET interrupt handler in this case.
2065                  */
2066                 hcint &= ~HCINTMSK_NYET;
2067         }
2068
2069         if (hcint & HCINTMSK_CHHLTD) {
2070                 dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd);
2071                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2072                         goto exit;
2073         }
2074         if (hcint & HCINTMSK_AHBERR) {
2075                 dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
2076                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2077                         goto exit;
2078         }
2079         if (hcint & HCINTMSK_STALL) {
2080                 dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
2081                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2082                         goto exit;
2083         }
2084         if (hcint & HCINTMSK_NAK) {
2085                 dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
2086                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2087                         goto exit;
2088         }
2089         if (hcint & HCINTMSK_ACK) {
2090                 dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
2091                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2092                         goto exit;
2093         }
2094         if (hcint & HCINTMSK_NYET) {
2095                 dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
2096                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2097                         goto exit;
2098         }
2099         if (hcint & HCINTMSK_XACTERR) {
2100                 dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
2101                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2102                         goto exit;
2103         }
2104         if (hcint & HCINTMSK_BBLERR) {
2105                 dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
2106                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2107                         goto exit;
2108         }
2109         if (hcint & HCINTMSK_FRMOVRUN) {
2110                 dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
2111                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2112                         goto exit;
2113         }
2114         if (hcint & HCINTMSK_DATATGLERR) {
2115                 dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd);
2116                 if (!dwc2_check_qtd_still_ok(qtd, chan->qh))
2117                         goto exit;
2118         }
2119
2120 exit:
2121         chan->hcint = 0;
2122 }
2123
2124 /*
2125  * This interrupt indicates that one or more host channels has a pending
2126  * interrupt. There are multiple conditions that can cause each host channel
2127  * interrupt. This function determines which conditions have occurred for each
2128  * host channel interrupt and handles them appropriately.
2129  */
2130 static void dwc2_hc_intr(struct dwc2_hsotg *hsotg)
2131 {
2132         u32 haint;
2133         int i;
2134         struct dwc2_host_chan *chan, *chan_tmp;
2135
2136         haint = dwc2_readl(hsotg->regs + HAINT);
2137         if (dbg_perio()) {
2138                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
2139
2140                 dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint);
2141         }
2142
2143         /*
2144          * According to USB 2.0 spec section 11.18.8, a host must
2145          * issue complete-split transactions in a microframe for a
2146          * set of full-/low-speed endpoints in the same relative
2147          * order as the start-splits were issued in a microframe for.
2148          */
2149         list_for_each_entry_safe(chan, chan_tmp, &hsotg->split_order,
2150                                  split_order_list_entry) {
2151                 int hc_num = chan->hc_num;
2152
2153                 if (haint & (1 << hc_num)) {
2154                         dwc2_hc_n_intr(hsotg, hc_num);
2155                         haint &= ~(1 << hc_num);
2156                 }
2157         }
2158
2159         for (i = 0; i < hsotg->core_params->host_channels; i++) {
2160                 if (haint & (1 << i))
2161                         dwc2_hc_n_intr(hsotg, i);
2162         }
2163 }
2164
2165 /* This function handles interrupts for the HCD */
2166 irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg)
2167 {
2168         u32 gintsts, dbg_gintsts;
2169         irqreturn_t retval = IRQ_NONE;
2170
2171         if (!dwc2_is_controller_alive(hsotg)) {
2172                 dev_warn(hsotg->dev, "Controller is dead\n");
2173                 return retval;
2174         }
2175
2176         spin_lock(&hsotg->lock);
2177
2178         /* Check if HOST Mode */
2179         if (dwc2_is_host_mode(hsotg)) {
2180                 gintsts = dwc2_read_core_intr(hsotg);
2181                 if (!gintsts) {
2182                         spin_unlock(&hsotg->lock);
2183                         return retval;
2184                 }
2185
2186                 retval = IRQ_HANDLED;
2187
2188                 dbg_gintsts = gintsts;
2189 #ifndef DEBUG_SOF
2190                 dbg_gintsts &= ~GINTSTS_SOF;
2191 #endif
2192                 if (!dbg_perio())
2193                         dbg_gintsts &= ~(GINTSTS_HCHINT | GINTSTS_RXFLVL |
2194                                          GINTSTS_PTXFEMP);
2195
2196                 /* Only print if there are any non-suppressed interrupts left */
2197                 if (dbg_gintsts)
2198                         dev_vdbg(hsotg->dev,
2199                                  "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n",
2200                                  gintsts);
2201
2202                 if (gintsts & GINTSTS_SOF)
2203                         dwc2_sof_intr(hsotg);
2204                 if (gintsts & GINTSTS_RXFLVL)
2205                         dwc2_rx_fifo_level_intr(hsotg);
2206                 if (gintsts & GINTSTS_NPTXFEMP)
2207                         dwc2_np_tx_fifo_empty_intr(hsotg);
2208                 if (gintsts & GINTSTS_PRTINT)
2209                         dwc2_port_intr(hsotg);
2210                 if (gintsts & GINTSTS_HCHINT)
2211                         dwc2_hc_intr(hsotg);
2212                 if (gintsts & GINTSTS_PTXFEMP)
2213                         dwc2_perio_tx_fifo_empty_intr(hsotg);
2214
2215                 if (dbg_gintsts) {
2216                         dev_vdbg(hsotg->dev,
2217                                  "DWC OTG HCD Finished Servicing Interrupts\n");
2218                         dev_vdbg(hsotg->dev,
2219                                  "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
2220                                  dwc2_readl(hsotg->regs + GINTSTS),
2221                                  dwc2_readl(hsotg->regs + GINTMSK));
2222                 }
2223         }
2224
2225         spin_unlock(&hsotg->lock);
2226
2227         return retval;
2228 }