drivers/usb/host/ohci-nxp.c

   1 /*
   2  * driver for NXP USB Host devices
   3  *
   4  * Currently supported OHCI host devices:
   5  * - NXP LPC32xx
   6  *
   7  * Authors: Dmitry Chigirev <source@mvista.com>
   8  *          Vitaly Wool <vitalywool@gmail.com>
   9  *
  10  * register initialization is based on code examples provided by Philips
  11  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
  12  *
  13  * NOTE: This driver does not have suspend/resume functionality
  14  * This driver is intended for engineering development purposes only
  15  *
  16  * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
  17  * the terms of the GNU General Public License version 2. This program
  18  * is licensed "as is" without any warranty of any kind, whether express
  19  * or implied.
  20  */
  21 #include <linux/clk.h>
  22 #include <linux/dma-mapping.h>
  23 #include <linux/io.h>
  24 #include <linux/i2c.h>
  25 #include <linux/module.h>
  26 #include <linux/of.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/usb/isp1301.h>
  29 #include <linux/usb.h>
  30 #include <linux/usb/hcd.h>
  31
  32 #include "ohci.h"
  33
  34 #include <mach/hardware.h>
  35
  36 #define USB_CONFIG_BASE         0x31020000
  37 #define USB_OTG_STAT_CONTROL    IO_ADDRESS(USB_CONFIG_BASE + 0x110)
  38
  39 /* USB_OTG_STAT_CONTROL bit defines */
  40 #define TRANSPARENT_I2C_EN      (1 << 7)
  41 #define HOST_EN                 (1 << 0)
  42
  43 /* On LPC32xx, those are undefined */
  44 #ifndef start_int_set_falling_edge
  45 #define start_int_set_falling_edge(irq)
  46 #define start_int_set_rising_edge(irq)
  47 #define start_int_ack(irq)
  48 #define start_int_mask(irq)
  49 #define start_int_umask(irq)
  50 #endif
  51
  52 #define DRIVER_DESC "OHCI NXP driver"
  53
  54 static const char hcd_name[] = "ohci-nxp";
  55 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
  56
  57 static struct i2c_client *isp1301_i2c_client;
  58
  59 extern int usb_disabled(void);
  60
  61 static struct clk *usb_host_clk;
  62
  63 static void isp1301_configure_lpc32xx(void)
  64 {
  65         /* LPC32XX only supports DAT_SE0 USB mode */
  66         /* This sequence is important */
  67
  68         /* Disable transparent UART mode first */
  69         i2c_smbus_write_byte_data(isp1301_i2c_client,
  70                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  71                 MC1_UART_EN);
  72         i2c_smbus_write_byte_data(isp1301_i2c_client,
  73                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  74                 ~MC1_SPEED_REG);
  75         i2c_smbus_write_byte_data(isp1301_i2c_client,
  76                                   ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
  77         i2c_smbus_write_byte_data(isp1301_i2c_client,
  78                   (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
  79                   ~0);
  80         i2c_smbus_write_byte_data(isp1301_i2c_client,
  81                 ISP1301_I2C_MODE_CONTROL_2,
  82                 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
  83         i2c_smbus_write_byte_data(isp1301_i2c_client,
  84                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
  85         i2c_smbus_write_byte_data(isp1301_i2c_client,
  86                 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
  87         i2c_smbus_write_byte_data(isp1301_i2c_client,
  88                 ISP1301_I2C_OTG_CONTROL_1,
  89                 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
  90         i2c_smbus_write_byte_data(isp1301_i2c_client,
  91                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  92                 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
  93         i2c_smbus_write_byte_data(isp1301_i2c_client,
  94                 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
  95         i2c_smbus_write_byte_data(isp1301_i2c_client,
  96                 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
  97                 ~0);
  98         i2c_smbus_write_byte_data(isp1301_i2c_client,
  99                 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 100
 101         printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
 102               i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
 103         printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
 104               i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
 105         printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
 106               i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
 107 }
 108
 109 static void isp1301_configure(void)
 110 {
 111         isp1301_configure_lpc32xx();
 112 }
 113
 114 static inline void isp1301_vbus_on(void)
 115 {
 116         i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
 117                                   OTG1_VBUS_DRV);
 118 }
 119
 120 static inline void isp1301_vbus_off(void)
 121 {
 122         i2c_smbus_write_byte_data(isp1301_i2c_client,
 123                 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
 124                 OTG1_VBUS_DRV);
 125 }
 126
 127 static void ohci_nxp_start_hc(void)
 128 {
 129         unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
 130         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 131         isp1301_vbus_on();
 132 }
 133
 134 static void ohci_nxp_stop_hc(void)
 135 {
 136         unsigned long tmp;
 137         isp1301_vbus_off();
 138         tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
 139         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 140 }
 141
 142 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 143 {
 144         struct usb_hcd *hcd = 0;
 145         const struct hc_driver *driver = &ohci_nxp_hc_driver;
 146         struct resource *res;
 147         int ret = 0, irq;
 148         struct device_node *isp1301_node;
 149
 150         if (pdev->dev.of_node) {
 151                 isp1301_node = of_parse_phandle(pdev->dev.of_node,
 152                                                 "transceiver", 0);
 153         } else {
 154                 isp1301_node = NULL;
 155         }
 156
 157         isp1301_i2c_client = isp1301_get_client(isp1301_node);
 158         if (!isp1301_i2c_client) {
 159                 return -EPROBE_DEFER;
 160         }
 161
 162         ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 163         if (ret)
 164                 goto fail_disable;
 165
 166         dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
 167         if (usb_disabled()) {
 168                 dev_err(&pdev->dev, "USB is disabled\n");
 169                 ret = -ENODEV;
 170                 goto fail_disable;
 171         }
 172
 173         /* Enable USB host clock */
 174         usb_host_clk = devm_clk_get(&pdev->dev, NULL);
 175         if (IS_ERR(usb_host_clk)) {
 176                 dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
 177                 ret = PTR_ERR(usb_host_clk);
 178                 goto fail_disable;
 179         }
 180
 181         ret = clk_prepare_enable(usb_host_clk);
 182         if (ret < 0) {
 183                 dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
 184                 goto fail_disable;
 185         }
 186
 187         isp1301_configure();
 188
 189         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 190         if (!hcd) {
 191                 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 192                 ret = -ENOMEM;
 193                 goto fail_hcd;
 194         }
 195
 196         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 197         hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 198         if (IS_ERR(hcd->regs)) {
 199                 ret = PTR_ERR(hcd->regs);
 200                 goto fail_resource;
 201         }
 202         hcd->rsrc_start = res->start;
 203         hcd->rsrc_len = resource_size(res);
 204
 205         irq = platform_get_irq(pdev, 0);
 206         if (irq < 0) {
 207                 ret = -ENXIO;
 208                 goto fail_resource;
 209         }
 210
 211         ohci_nxp_start_hc();
 212         platform_set_drvdata(pdev, hcd);
 213
 214         dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
 215         ret = usb_add_hcd(hcd, irq, 0);
 216         if (ret == 0) {
 217                 device_wakeup_enable(hcd->self.controller);
 218                 return ret;
 219         }
 220
 221         ohci_nxp_stop_hc();
 222 fail_resource:
 223         usb_put_hcd(hcd);
 224 fail_hcd:
 225         clk_disable_unprepare(usb_host_clk);
 226 fail_disable:
 227         isp1301_i2c_client = NULL;
 228         return ret;
 229 }
 230
 231 static int ohci_hcd_nxp_remove(struct platform_device *pdev)
 232 {
 233         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 234
 235         usb_remove_hcd(hcd);
 236         ohci_nxp_stop_hc();
 237         usb_put_hcd(hcd);
 238         clk_disable_unprepare(usb_host_clk);
 239         isp1301_i2c_client = NULL;
 240
 241         return 0;
 242 }
 243
 244 /* work with hotplug and coldplug */
 245 MODULE_ALIAS("platform:usb-ohci");
 246
 247 #ifdef CONFIG_OF
 248 static const struct of_device_id ohci_hcd_nxp_match[] = {
 249         { .compatible = "nxp,ohci-nxp" },
 250         {},
 251 };
 252 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
 253 #endif
 254
 255 static struct platform_driver ohci_hcd_nxp_driver = {
 256         .driver = {
 257                 .name = "usb-ohci",
 258                 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
 259         },
 260         .probe = ohci_hcd_nxp_probe,
 261         .remove = ohci_hcd_nxp_remove,
 262 };
 263
 264 static int __init ohci_nxp_init(void)
 265 {
 266         if (usb_disabled())
 267                 return -ENODEV;
 268
 269         pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 270
 271         ohci_init_driver(&ohci_nxp_hc_driver, NULL);
 272         return platform_driver_register(&ohci_hcd_nxp_driver);
 273 }
 274 module_init(ohci_nxp_init);
 275
 276 static void __exit ohci_nxp_cleanup(void)
 277 {
 278         platform_driver_unregister(&ohci_hcd_nxp_driver);
 279 }
 280 module_exit(ohci_nxp_cleanup);
 281
 282 MODULE_DESCRIPTION(DRIVER_DESC);
 283 MODULE_LICENSE("GPL v2");