drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <linux/clk.h>
  23 #include <linux/io.h>
  24 #include <linux/kernel.h>
  25 #include <linux/module.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/platform_data/usb-ohci-s3c2410.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/hcd.h>
  30
  31 #include "ohci.h"
  32
  33
  34 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  35
  36 /* clock device associated with the hcd */
  37
  38
  39 #define DRIVER_DESC "OHCI S3C2410 driver"
  40
  41 static const char hcd_name[] = "ohci-s3c2410";
  42
  43 static struct clk *clk;
  44 static struct clk *usb_clk;
  45
  46 static struct hc_driver __read_mostly ohci_s3c2410_hc_driver;
  47
  48 /* forward definitions */
  49
  50 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  51
  52 /* conversion functions */
  53
  54 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  55 {
  56         return dev_get_platdata(hcd->self.controller);
  57 }
  58
  59 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  60 {
  61         struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
  62
  63         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  64
  65         clk_prepare_enable(usb_clk);
  66         mdelay(2);                      /* let the bus clock stabilise */
  67
  68         clk_prepare_enable(clk);
  69
  70         if (info != NULL) {
  71                 info->hcd       = hcd;
  72                 info->report_oc = s3c2410_hcd_oc;
  73
  74                 if (info->enable_oc != NULL)
  75                         (info->enable_oc)(info, 1);
  76         }
  77 }
  78
  79 static void s3c2410_stop_hc(struct platform_device *dev)
  80 {
  81         struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
  82
  83         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  84
  85         if (info != NULL) {
  86                 info->report_oc = NULL;
  87                 info->hcd       = NULL;
  88
  89                 if (info->enable_oc != NULL)
  90                         (info->enable_oc)(info, 0);
  91         }
  92
  93         clk_disable_unprepare(clk);
  94         clk_disable_unprepare(usb_clk);
  95 }
  96
  97 /* ohci_s3c2410_hub_status_data
  98  *
  99  * update the status data from the hub with anything that
 100  * has been detected by our system
 101 */
 102
 103 static int
 104 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf)
 105 {
 106         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 107         struct s3c2410_hcd_port *port;
 108         int orig;
 109         int portno;
 110
 111         orig = ohci_hub_status_data(hcd, buf);
 112
 113         if (info == NULL)
 114                 return orig;
 115
 116         port = &info->port[0];
 117
 118         /* mark any changed port as changed */
 119
 120         for (portno = 0; portno < 2; port++, portno++) {
 121                 if (port->oc_changed == 1 &&
 122                     port->flags & S3C_HCDFLG_USED) {
 123                         dev_dbg(hcd->self.controller,
 124                                 "oc change on port %d\n", portno);
 125
 126                         if (orig < 1)
 127                                 orig = 1;
 128
 129                         buf[0] |= 1<<(portno+1);
 130                 }
 131         }
 132
 133         return orig;
 134 }
 135
 136 /* s3c2410_usb_set_power
 137  *
 138  * configure the power on a port, by calling the platform device
 139  * routine registered with the platform device
 140 */
 141
 142 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 143                                   int port, int to)
 144 {
 145         if (info == NULL)
 146                 return;
 147
 148         if (info->power_control != NULL) {
 149                 info->port[port-1].power = to;
 150                 (info->power_control)(port-1, to);
 151         }
 152 }
 153
 154 /* ohci_s3c2410_hub_control
 155  *
 156  * look at control requests to the hub, and see if we need
 157  * to take any action or over-ride the results from the
 158  * request.
 159 */
 160
 161 static int ohci_s3c2410_hub_control(
 162         struct usb_hcd  *hcd,
 163         u16             typeReq,
 164         u16             wValue,
 165         u16             wIndex,
 166         char            *buf,
 167         u16             wLength)
 168 {
 169         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 170         struct usb_hub_descriptor *desc;
 171         int ret = -EINVAL;
 172         u32 *data = (u32 *)buf;
 173
 174         dev_dbg(hcd->self.controller,
 175                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 176                 hcd, typeReq, wValue, wIndex, buf, wLength);
 177
 178         /* if we are only an humble host without any special capabilities
 179          * process the request straight away and exit */
 180
 181         if (info == NULL) {
 182                 ret = ohci_hub_control(hcd, typeReq, wValue,
 183                                        wIndex, buf, wLength);
 184                 goto out;
 185         }
 186
 187         /* check the request to see if it needs handling */
 188
 189         switch (typeReq) {
 190         case SetPortFeature:
 191                 if (wValue == USB_PORT_FEAT_POWER) {
 192                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 193                         s3c2410_usb_set_power(info, wIndex, 1);
 194                         goto out;
 195                 }
 196                 break;
 197
 198         case ClearPortFeature:
 199                 switch (wValue) {
 200                 case USB_PORT_FEAT_C_OVER_CURRENT:
 201                         dev_dbg(hcd->self.controller,
 202                                 "ClearPortFeature: C_OVER_CURRENT\n");
 203
 204                         if (valid_port(wIndex)) {
 205                                 info->port[wIndex-1].oc_changed = 0;
 206                                 info->port[wIndex-1].oc_status = 0;
 207                         }
 208
 209                         goto out;
 210
 211                 case USB_PORT_FEAT_OVER_CURRENT:
 212                         dev_dbg(hcd->self.controller,
 213                                 "ClearPortFeature: OVER_CURRENT\n");
 214
 215                         if (valid_port(wIndex))
 216                                 info->port[wIndex-1].oc_status = 0;
 217
 218                         goto out;
 219
 220                 case USB_PORT_FEAT_POWER:
 221                         dev_dbg(hcd->self.controller,
 222                                 "ClearPortFeature: POWER\n");
 223
 224                         if (valid_port(wIndex)) {
 225                                 s3c2410_usb_set_power(info, wIndex, 0);
 226                                 return 0;
 227                         }
 228                 }
 229                 break;
 230         }
 231
 232         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 233         if (ret)
 234                 goto out;
 235
 236         switch (typeReq) {
 237         case GetHubDescriptor:
 238
 239                 /* update the hub's descriptor */
 240
 241                 desc = (struct usb_hub_descriptor *)buf;
 242
 243                 if (info->power_control == NULL)
 244                         return ret;
 245
 246                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 247                         desc->wHubCharacteristics);
 248
 249                 /* remove the old configurations for power-switching, and
 250                  * over-current protection, and insert our new configuration
 251                  */
 252
 253                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 254                 desc->wHubCharacteristics |= cpu_to_le16(
 255                         HUB_CHAR_INDV_PORT_LPSM);
 256
 257                 if (info->enable_oc) {
 258                         desc->wHubCharacteristics &= ~cpu_to_le16(
 259                                 HUB_CHAR_OCPM);
 260                         desc->wHubCharacteristics |=  cpu_to_le16(
 261                                 HUB_CHAR_INDV_PORT_OCPM);
 262                 }
 263
 264                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 265                         desc->wHubCharacteristics);
 266
 267                 return ret;
 268
 269         case GetPortStatus:
 270                 /* check port status */
 271
 272                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 273
 274                 if (valid_port(wIndex)) {
 275                         if (info->port[wIndex-1].oc_changed)
 276                                 *data |= cpu_to_le32(RH_PS_OCIC);
 277
 278                         if (info->port[wIndex-1].oc_status)
 279                                 *data |= cpu_to_le32(RH_PS_POCI);
 280                 }
 281         }
 282
 283  out:
 284         return ret;
 285 }
 286
 287 /* s3c2410_hcd_oc
 288  *
 289  * handle an over-current report
 290 */
 291
 292 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 293 {
 294         struct s3c2410_hcd_port *port;
 295         struct usb_hcd *hcd;
 296         unsigned long flags;
 297         int portno;
 298
 299         if (info == NULL)
 300                 return;
 301
 302         port = &info->port[0];
 303         hcd = info->hcd;
 304
 305         local_irq_save(flags);
 306
 307         for (portno = 0; portno < 2; port++, portno++) {
 308                 if (port_oc & (1<<portno) &&
 309                     port->flags & S3C_HCDFLG_USED) {
 310                         port->oc_status = 1;
 311                         port->oc_changed = 1;
 312
 313                         /* ok, once over-current is detected,
 314                            the port needs to be powered down */
 315                         s3c2410_usb_set_power(info, portno+1, 0);
 316                 }
 317         }
 318
 319         local_irq_restore(flags);
 320 }
 321
 322 /* may be called without controller electrically present */
 323 /* may be called with controller, bus, and devices active */
 324
 325 /*
 326  * ohci_hcd_s3c2410_remove - shutdown processing for HCD
 327  * @dev: USB Host Controller being removed
 328  * Context: !in_interrupt()
 329  *
 330  * Reverses the effect of ohci_hcd_3c2410_probe(), first invoking
 331  * the HCD's stop() method.  It is always called from a thread
 332  * context, normally "rmmod", "apmd", or something similar.
 333  *
 334 */
 335
 336 static int
 337 ohci_hcd_s3c2410_remove(struct platform_device *dev)
 338 {
 339         struct usb_hcd *hcd = platform_get_drvdata(dev);
 340
 341         usb_remove_hcd(hcd);
 342         s3c2410_stop_hc(dev);
 343         usb_put_hcd(hcd);
 344         return 0;
 345 }
 346
 347 /**
 348  * ohci_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 349  * Context: !in_interrupt()
 350  *
 351  * Allocates basic resources for this USB host controller, and
 352  * then invokes the start() method for the HCD associated with it
 353  * through the hotplug entry's driver_data.
 354  *
 355  */
 356 static int ohci_hcd_s3c2410_probe(struct platform_device *dev)
 357 {
 358         struct usb_hcd *hcd = NULL;
 359         struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
 360         int retval;
 361
 362         s3c2410_usb_set_power(info, 1, 1);
 363         s3c2410_usb_set_power(info, 2, 1);
 364
 365         hcd = usb_create_hcd(&ohci_s3c2410_hc_driver, &dev->dev, "s3c24xx");
 366         if (hcd == NULL)
 367                 return -ENOMEM;
 368
 369         hcd->rsrc_start = dev->resource[0].start;
 370         hcd->rsrc_len   = resource_size(&dev->resource[0]);
 371
 372         hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
 373         if (IS_ERR(hcd->regs)) {
 374                 retval = PTR_ERR(hcd->regs);
 375                 goto err_put;
 376         }
 377
 378         clk = devm_clk_get(&dev->dev, "usb-host");
 379         if (IS_ERR(clk)) {
 380                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 381                 retval = PTR_ERR(clk);
 382                 goto err_put;
 383         }
 384
 385         usb_clk = devm_clk_get(&dev->dev, "usb-bus-host");
 386         if (IS_ERR(usb_clk)) {
 387                 dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
 388                 retval = PTR_ERR(usb_clk);
 389                 goto err_put;
 390         }
 391
 392         s3c2410_start_hc(dev, hcd);
 393
 394         retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 395         if (retval != 0)
 396                 goto err_ioremap;
 397
 398         device_wakeup_enable(hcd->self.controller);
 399         return 0;
 400
 401  err_ioremap:
 402         s3c2410_stop_hc(dev);
 403
 404  err_put:
 405         usb_put_hcd(hcd);
 406         return retval;
 407 }
 408
 409 /*-------------------------------------------------------------------------*/
 410
 411 #ifdef CONFIG_PM
 412 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
 413 {
 414         struct usb_hcd *hcd = dev_get_drvdata(dev);
 415         struct platform_device *pdev = to_platform_device(dev);
 416         bool do_wakeup = device_may_wakeup(dev);
 417         int rc = 0;
 418
 419         rc = ohci_suspend(hcd, do_wakeup);
 420         if (rc)
 421                 return rc;
 422
 423         s3c2410_stop_hc(pdev);
 424
 425         return rc;
 426 }
 427
 428 static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
 429 {
 430         struct usb_hcd *hcd = dev_get_drvdata(dev);
 431         struct platform_device *pdev = to_platform_device(dev);
 432
 433         s3c2410_start_hc(pdev, hcd);
 434
 435         ohci_resume(hcd, false);
 436
 437         return 0;
 438 }
 439 #else
 440 #define ohci_hcd_s3c2410_drv_suspend    NULL
 441 #define ohci_hcd_s3c2410_drv_resume     NULL
 442 #endif
 443
 444 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
 445         .suspend        = ohci_hcd_s3c2410_drv_suspend,
 446         .resume         = ohci_hcd_s3c2410_drv_resume,
 447 };
 448
 449 static const struct of_device_id ohci_hcd_s3c2410_dt_ids[] = {
 450         { .compatible = "samsung,s3c2410-ohci" },
 451         { /* sentinel */ }
 452 };
 453
 454 MODULE_DEVICE_TABLE(of, ohci_hcd_s3c2410_dt_ids);
 455
 456 static struct platform_driver ohci_hcd_s3c2410_driver = {
 457         .probe          = ohci_hcd_s3c2410_probe,
 458         .remove         = ohci_hcd_s3c2410_remove,
 459         .shutdown       = usb_hcd_platform_shutdown,
 460         .driver         = {
 461                 .name   = "s3c2410-ohci",
 462                 .pm     = &ohci_hcd_s3c2410_pm_ops,
 463                 .of_match_table = ohci_hcd_s3c2410_dt_ids,
 464         },
 465 };
 466
 467 static int __init ohci_s3c2410_init(void)
 468 {
 469         if (usb_disabled())
 470                 return -ENODEV;
 471
 472         pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 473         ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
 474
 475         /*
 476          * The Samsung HW has some unusual quirks, which require
 477          * Sumsung-specific workarounds. We override certain hc_driver
 478          * functions here to achieve that. We explicitly do not enhance
 479          * ohci_driver_overrides to allow this more easily, since this
 480          * is an unusual case, and we don't want to encourage others to
 481          * override these functions by making it too easy.
 482          */
 483
 484         ohci_s3c2410_hc_driver.hub_status_data  = ohci_s3c2410_hub_status_data;
 485         ohci_s3c2410_hc_driver.hub_control      = ohci_s3c2410_hub_control;
 486
 487         return platform_driver_register(&ohci_hcd_s3c2410_driver);
 488 }
 489 module_init(ohci_s3c2410_init);
 490
 491 static void __exit ohci_s3c2410_cleanup(void)
 492 {
 493         platform_driver_unregister(&ohci_hcd_s3c2410_driver);
 494 }
 495 module_exit(ohci_s3c2410_cleanup);
 496
 497 MODULE_DESCRIPTION(DRIVER_DESC);
 498 MODULE_LICENSE("GPL");
 499 MODULE_ALIAS("platform:s3c2410-ohci");