drivers/usb/host/ohci-sa1111.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * SA1111 Bus Glue
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * This file is licenced under the GPL.
  14  */
  15
  16 #include <asm/mach-types.h>
  17 #include <asm/hardware/sa1111.h>
  18
  19 #ifndef CONFIG_SA1111
  20 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
  21 #endif
  22
  23 #define USB_STATUS      0x0118
  24 #define USB_RESET       0x011c
  25 #define USB_IRQTEST     0x0120
  26
  27 #define USB_RESET_FORCEIFRESET  (1 << 0)
  28 #define USB_RESET_FORCEHCRESET  (1 << 1)
  29 #define USB_RESET_CLKGENRESET   (1 << 2)
  30 #define USB_RESET_SIMSCALEDOWN  (1 << 3)
  31 #define USB_RESET_USBINTTEST    (1 << 4)
  32 #define USB_RESET_SLEEPSTBYEN   (1 << 5)
  33 #define USB_RESET_PWRSENSELOW   (1 << 6)
  34 #define USB_RESET_PWRCTRLLOW    (1 << 7)
  35
  36 #define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
  37 #define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
  38 #define USB_STATUS_NIRQHCIM       (1 <<  9)
  39 #define USB_STATUS_NHCIMFCLR      (1 << 10)
  40 #define USB_STATUS_USBPWRSENSE    (1 << 11)
  41
  42 #if 0
  43 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
  44 {
  45         unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
  46
  47         printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
  48              ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
  49              ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
  50              ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
  51              ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
  52              ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
  53 }
  54 #endif
  55
  56 static int ohci_sa1111_reset(struct usb_hcd *hcd)
  57 {
  58         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
  59
  60         ohci_hcd_init(ohci);
  61         return ohci_init(ohci);
  62 }
  63
  64 static int ohci_sa1111_start(struct usb_hcd *hcd)
  65 {
  66         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
  67         int ret;
  68
  69         ret = ohci_run(ohci);
  70         if (ret < 0) {
  71                 ohci_err(ohci, "can't start\n");
  72                 ohci_stop(hcd);
  73         }
  74         return ret;
  75 }
  76
  77 static const struct hc_driver ohci_sa1111_hc_driver = {
  78         .description =          hcd_name,
  79         .product_desc =         "SA-1111 OHCI",
  80         .hcd_priv_size =        sizeof(struct ohci_hcd),
  81
  82         /*
  83          * generic hardware linkage
  84          */
  85         .irq =                  ohci_irq,
  86         .flags =                HCD_USB11 | HCD_MEMORY,
  87
  88         /*
  89          * basic lifecycle operations
  90          */
  91         .reset =                ohci_sa1111_reset,
  92         .start =                ohci_sa1111_start,
  93         .stop =                 ohci_stop,
  94         .shutdown =             ohci_shutdown,
  95
  96         /*
  97          * managing i/o requests and associated device resources
  98          */
  99         .urb_enqueue =          ohci_urb_enqueue,
 100         .urb_dequeue =          ohci_urb_dequeue,
 101         .endpoint_disable =     ohci_endpoint_disable,
 102
 103         /*
 104          * scheduling support
 105          */
 106         .get_frame_number =     ohci_get_frame,
 107
 108         /*
 109          * root hub support
 110          */
 111         .hub_status_data =      ohci_hub_status_data,
 112         .hub_control =          ohci_hub_control,
 113 #ifdef  CONFIG_PM
 114         .bus_suspend =          ohci_bus_suspend,
 115         .bus_resume =           ohci_bus_resume,
 116 #endif
 117         .start_port_reset =     ohci_start_port_reset,
 118 };
 119
 120 static int sa1111_start_hc(struct sa1111_dev *dev)
 121 {
 122         unsigned int usb_rst = 0;
 123         int ret;
 124
 125         dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 126
 127         if (machine_is_xp860() ||
 128             machine_is_assabet() ||
 129             machine_is_pfs168() ||
 130             machine_is_badge4())
 131                 usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
 132
 133         /*
 134          * Configure the power sense and control lines.  Place the USB
 135          * host controller in reset.
 136          */
 137         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 138                       dev->mapbase + USB_RESET);
 139
 140         /*
 141          * Now, carefully enable the USB clock, and take
 142          * the USB host controller out of reset.
 143          */
 144         ret = sa1111_enable_device(dev);
 145         if (ret == 0) {
 146                 udelay(11);
 147                 sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
 148         }
 149
 150         return ret;
 151 }
 152
 153 static void sa1111_stop_hc(struct sa1111_dev *dev)
 154 {
 155         unsigned int usb_rst;
 156
 157         dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 158
 159         /*
 160          * Put the USB host controller into reset.
 161          */
 162         usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 163         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 164                       dev->mapbase + USB_RESET);
 165
 166         /*
 167          * Stop the USB clock.
 168          */
 169         sa1111_disable_device(dev);
 170 }
 171
 172 /**
 173  * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
 174  *
 175  * Allocates basic resources for this USB host controller, and
 176  * then invokes the start() method for the HCD associated with it.
 177  */
 178 static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 179 {
 180         struct usb_hcd *hcd;
 181         int ret;
 182
 183         if (usb_disabled())
 184                 return -ENODEV;
 185
 186         /*
 187          * We don't call dma_set_mask_and_coherent() here because the
 188          * DMA mask has already been appropraitely setup by the core
 189          * SA-1111 bus code (which includes bug workarounds.)
 190          */
 191
 192         hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 193         if (!hcd)
 194                 return -ENOMEM;
 195
 196         hcd->rsrc_start = dev->res.start;
 197         hcd->rsrc_len = resource_size(&dev->res);
 198
 199         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 200                 dev_dbg(&dev->dev, "request_mem_region failed\n");
 201                 ret = -EBUSY;
 202                 goto err1;
 203         }
 204
 205         hcd->regs = dev->mapbase;
 206
 207         ret = sa1111_start_hc(dev);
 208         if (ret)
 209                 goto err2;
 210
 211         ret = usb_add_hcd(hcd, dev->irq[1], 0);
 212         if (ret == 0) {
 213                 device_wakeup_enable(hcd->self.controller);
 214                 return ret;
 215         }
 216
 217         sa1111_stop_hc(dev);
 218  err2:
 219         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 220  err1:
 221         usb_put_hcd(hcd);
 222         return ret;
 223 }
 224
 225 /**
 226  * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
 227  * @dev: USB Host Controller being removed
 228  *
 229  * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
 230  * the HCD's stop() method.
 231  */
 232 static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 233 {
 234         struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 235
 236         usb_remove_hcd(hcd);
 237         sa1111_stop_hc(dev);
 238         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 239         usb_put_hcd(hcd);
 240
 241         return 0;
 242 }
 243
 244 static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 245 {
 246         struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 247
 248         if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 249                 hcd->driver->shutdown(hcd);
 250                 sa1111_stop_hc(dev);
 251         }
 252 }
 253
 254 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 255         .drv = {
 256                 .name   = "sa1111-ohci",
 257                 .owner  = THIS_MODULE,
 258         },
 259         .devid          = SA1111_DEVID_USB,
 260         .probe          = ohci_hcd_sa1111_probe,
 261         .remove         = ohci_hcd_sa1111_remove,
 262         .shutdown       = ohci_hcd_sa1111_shutdown,
 263 };