GNU Linux-libre 4.19.264-gnu1
[releases.git] / drivers / watchdog / hpwdt.c
1 /*
2  *      HPE WatchDog Driver
3  *      based on
4  *
5  *      SoftDog 0.05:   A Software Watchdog Device
6  *
7  *      (c) Copyright 2018 Hewlett Packard Enterprise Development LP
8  *      Thomas Mingarelli <thomas.mingarelli@hpe.com>
9  *
10  *      This program is free software; you can redistribute it and/or
11  *      modify it under the terms of the GNU General Public License
12  *      version 2 as published by the Free Software Foundation
13  *
14  */
15
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17
18 #include <linux/device.h>
19 #include <linux/io.h>
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/pci.h>
24 #include <linux/pci_ids.h>
25 #include <linux/types.h>
26 #include <linux/watchdog.h>
27 #include <asm/nmi.h>
28
29 #define HPWDT_VERSION                   "2.0.0"
30 #define SECS_TO_TICKS(secs)             ((secs) * 1000 / 128)
31 #define TICKS_TO_SECS(ticks)            ((ticks) * 128 / 1000)
32 #define HPWDT_MAX_TIMER                 TICKS_TO_SECS(65535)
33 #define DEFAULT_MARGIN                  30
34 #define PRETIMEOUT_SEC                  9
35
36 static bool ilo5;
37 static unsigned int soft_margin = DEFAULT_MARGIN;       /* in seconds */
38 static bool nowayout = WATCHDOG_NOWAYOUT;
39 static bool pretimeout = IS_ENABLED(CONFIG_HPWDT_NMI_DECODING);
40
41 static void __iomem *pci_mem_addr;              /* the PCI-memory address */
42 static unsigned long __iomem *hpwdt_nmistat;
43 static unsigned long __iomem *hpwdt_timer_reg;
44 static unsigned long __iomem *hpwdt_timer_con;
45
46 static const struct pci_device_id hpwdt_devices[] = {
47         { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },   /* iLO2 */
48         { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },       /* iLO3 */
49         {0},                    /* terminate list */
50 };
51 MODULE_DEVICE_TABLE(pci, hpwdt_devices);
52
53
54 /*
55  *      Watchdog operations
56  */
57 static int hpwdt_start(struct watchdog_device *wdd)
58 {
59         int control = 0x81 | (pretimeout ? 0x4 : 0);
60         int reload = SECS_TO_TICKS(wdd->timeout);
61
62         dev_dbg(wdd->parent, "start watchdog 0x%08x:0x%02x\n", reload, control);
63         iowrite16(reload, hpwdt_timer_reg);
64         iowrite8(control, hpwdt_timer_con);
65
66         return 0;
67 }
68
69 static void hpwdt_stop(void)
70 {
71         unsigned long data;
72
73         pr_debug("stop  watchdog\n");
74
75         data = ioread8(hpwdt_timer_con);
76         data &= 0xFE;
77         iowrite8(data, hpwdt_timer_con);
78 }
79
80 static int hpwdt_stop_core(struct watchdog_device *wdd)
81 {
82         hpwdt_stop();
83
84         return 0;
85 }
86
87 static int hpwdt_ping(struct watchdog_device *wdd)
88 {
89         int reload = SECS_TO_TICKS(wdd->timeout);
90
91         dev_dbg(wdd->parent, "ping  watchdog 0x%08x\n", reload);
92         iowrite16(reload, hpwdt_timer_reg);
93
94         return 0;
95 }
96
97 static unsigned int hpwdt_gettimeleft(struct watchdog_device *wdd)
98 {
99         return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
100 }
101
102 static int hpwdt_settimeout(struct watchdog_device *wdd, unsigned int val)
103 {
104         dev_dbg(wdd->parent, "set_timeout = %d\n", val);
105
106         wdd->timeout = val;
107         if (val <= wdd->pretimeout) {
108                 dev_dbg(wdd->parent, "pretimeout < timeout. Setting to zero\n");
109                 wdd->pretimeout = 0;
110                 pretimeout = 0;
111                 if (watchdog_active(wdd))
112                         hpwdt_start(wdd);
113         }
114         hpwdt_ping(wdd);
115
116         return 0;
117 }
118
119 #ifdef CONFIG_HPWDT_NMI_DECODING
120 static int hpwdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req)
121 {
122         unsigned int val = 0;
123
124         dev_dbg(wdd->parent, "set_pretimeout = %d\n", req);
125         if (req) {
126                 val = PRETIMEOUT_SEC;
127                 if (val >= wdd->timeout)
128                         return -EINVAL;
129         }
130
131         if (val != req)
132                 dev_dbg(wdd->parent, "Rounding pretimeout to: %d\n", val);
133
134         wdd->pretimeout = val;
135         pretimeout = !!val;
136
137         if (watchdog_active(wdd))
138                 hpwdt_start(wdd);
139
140         return 0;
141 }
142
143 static int hpwdt_my_nmi(void)
144 {
145         return ioread8(hpwdt_nmistat) & 0x6;
146 }
147
148 /*
149  *      NMI Handler
150  */
151 static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
152 {
153         unsigned int mynmi = hpwdt_my_nmi();
154         static char panic_msg[] =
155                 "00: An NMI occurred. Depending on your system the reason "
156                 "for the NMI is logged in any one of the following resources:\n"
157                 "1. Integrated Management Log (IML)\n"
158                 "2. OA Syslog\n"
159                 "3. OA Forward Progress Log\n"
160                 "4. iLO Event Log";
161
162         if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi)
163                 return NMI_DONE;
164
165         if (ilo5 && !pretimeout)
166                 return NMI_DONE;
167
168         hpwdt_stop();
169
170         hex_byte_pack(panic_msg, mynmi);
171         nmi_panic(regs, panic_msg);
172
173         return NMI_HANDLED;
174 }
175 #endif /* CONFIG_HPWDT_NMI_DECODING */
176
177
178 static const struct watchdog_info ident = {
179         .options = WDIOF_PRETIMEOUT    |
180                    WDIOF_SETTIMEOUT    |
181                    WDIOF_KEEPALIVEPING |
182                    WDIOF_MAGICCLOSE,
183         .identity = "HPE iLO2+ HW Watchdog Timer",
184 };
185
186 /*
187  *      Kernel interfaces
188  */
189
190 static const struct watchdog_ops hpwdt_ops = {
191         .owner          = THIS_MODULE,
192         .start          = hpwdt_start,
193         .stop           = hpwdt_stop_core,
194         .ping           = hpwdt_ping,
195         .set_timeout    = hpwdt_settimeout,
196         .get_timeleft   = hpwdt_gettimeleft,
197 #ifdef CONFIG_HPWDT_NMI_DECODING
198         .set_pretimeout = hpwdt_set_pretimeout,
199 #endif
200 };
201
202 static struct watchdog_device hpwdt_dev = {
203         .info           = &ident,
204         .ops            = &hpwdt_ops,
205         .min_timeout    = 1,
206         .max_timeout    = HPWDT_MAX_TIMER,
207         .timeout        = DEFAULT_MARGIN,
208 #ifdef CONFIG_HPWDT_NMI_DECODING
209         .pretimeout     = PRETIMEOUT_SEC,
210 #endif
211 };
212
213
214 /*
215  *      Init & Exit
216  */
217
218 static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
219 {
220 #ifdef CONFIG_HPWDT_NMI_DECODING
221         int retval;
222         /*
223          * Only one function can register for NMI_UNKNOWN
224          */
225         retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt");
226         if (retval)
227                 goto error;
228         retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt");
229         if (retval)
230                 goto error1;
231         retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt");
232         if (retval)
233                 goto error2;
234
235         dev_info(&dev->dev,
236                 "HPE Watchdog Timer Driver: NMI decoding initialized\n");
237
238         return 0;
239
240 error2:
241         unregister_nmi_handler(NMI_SERR, "hpwdt");
242 error1:
243         unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
244 error:
245         dev_warn(&dev->dev,
246                 "Unable to register a die notifier (err=%d).\n",
247                 retval);
248         return retval;
249 #endif  /* CONFIG_HPWDT_NMI_DECODING */
250         return 0;
251 }
252
253 static void hpwdt_exit_nmi_decoding(void)
254 {
255 #ifdef CONFIG_HPWDT_NMI_DECODING
256         unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
257         unregister_nmi_handler(NMI_SERR, "hpwdt");
258         unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
259 #endif
260 }
261
262 static int hpwdt_init_one(struct pci_dev *dev,
263                                         const struct pci_device_id *ent)
264 {
265         int retval;
266
267         /*
268          * First let's find out if we are on an iLO2+ server. We will
269          * not run on a legacy ASM box.
270          * So we only support the G5 ProLiant servers and higher.
271          */
272         if (dev->subsystem_vendor != PCI_VENDOR_ID_HP &&
273             dev->subsystem_vendor != PCI_VENDOR_ID_HP_3PAR) {
274                 dev_warn(&dev->dev,
275                         "This server does not have an iLO2+ ASIC.\n");
276                 return -ENODEV;
277         }
278
279         /*
280          * Ignore all auxilary iLO devices with the following PCI ID
281          */
282         if (dev->subsystem_vendor == PCI_VENDOR_ID_HP &&
283             dev->subsystem_device == 0x1979)
284                 return -ENODEV;
285
286         if (pci_enable_device(dev)) {
287                 dev_warn(&dev->dev,
288                         "Not possible to enable PCI Device: 0x%x:0x%x.\n",
289                         ent->vendor, ent->device);
290                 return -ENODEV;
291         }
292
293         pci_mem_addr = pci_iomap(dev, 1, 0x80);
294         if (!pci_mem_addr) {
295                 dev_warn(&dev->dev,
296                         "Unable to detect the iLO2+ server memory.\n");
297                 retval = -ENOMEM;
298                 goto error_pci_iomap;
299         }
300         hpwdt_nmistat   = pci_mem_addr + 0x6e;
301         hpwdt_timer_reg = pci_mem_addr + 0x70;
302         hpwdt_timer_con = pci_mem_addr + 0x72;
303
304         /* Make sure that timer is disabled until /dev/watchdog is opened */
305         hpwdt_stop();
306
307         /* Initialize NMI Decoding functionality */
308         retval = hpwdt_init_nmi_decoding(dev);
309         if (retval != 0)
310                 goto error_init_nmi_decoding;
311
312         watchdog_set_nowayout(&hpwdt_dev, nowayout);
313         if (watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL))
314                 dev_warn(&dev->dev, "Invalid soft_margin: %d.\n", soft_margin);
315
316         hpwdt_dev.parent = &dev->dev;
317         retval = watchdog_register_device(&hpwdt_dev);
318         if (retval < 0) {
319                 dev_err(&dev->dev, "watchdog register failed: %d.\n", retval);
320                 goto error_wd_register;
321         }
322
323         dev_info(&dev->dev, "HPE Watchdog Timer Driver: %s"
324                         ", timer margin: %d seconds (nowayout=%d).\n",
325                         HPWDT_VERSION, hpwdt_dev.timeout, nowayout);
326
327         if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR)
328                 ilo5 = true;
329
330         return 0;
331
332 error_wd_register:
333         hpwdt_exit_nmi_decoding();
334 error_init_nmi_decoding:
335         pci_iounmap(dev, pci_mem_addr);
336 error_pci_iomap:
337         pci_disable_device(dev);
338         return retval;
339 }
340
341 static void hpwdt_exit(struct pci_dev *dev)
342 {
343         if (!nowayout)
344                 hpwdt_stop();
345
346         watchdog_unregister_device(&hpwdt_dev);
347         hpwdt_exit_nmi_decoding();
348         pci_iounmap(dev, pci_mem_addr);
349         pci_disable_device(dev);
350 }
351
352 static struct pci_driver hpwdt_driver = {
353         .name = "hpwdt",
354         .id_table = hpwdt_devices,
355         .probe = hpwdt_init_one,
356         .remove = hpwdt_exit,
357 };
358
359 MODULE_AUTHOR("Tom Mingarelli");
360 MODULE_DESCRIPTION("hpe watchdog driver");
361 MODULE_LICENSE("GPL");
362 MODULE_VERSION(HPWDT_VERSION);
363
364 module_param(soft_margin, int, 0);
365 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
366
367 module_param(nowayout, bool, 0);
368 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
369                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
370
371 #ifdef CONFIG_HPWDT_NMI_DECODING
372 module_param(pretimeout, bool, 0);
373 MODULE_PARM_DESC(pretimeout, "Watchdog pretimeout enabled");
374 #endif
375
376 module_pci_driver(hpwdt_driver);