GNU Linux-libre 4.19.264-gnu1
[releases.git] / include / drm / drm_vblank.h
1 /*
2  * Copyright 2016 Intel Corp.
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
19  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
20  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
21  * OTHER DEALINGS IN THE SOFTWARE.
22  */
23
24 #ifndef _DRM_VBLANK_H_
25 #define _DRM_VBLANK_H_
26
27 #include <linux/seqlock.h>
28 #include <linux/idr.h>
29 #include <linux/poll.h>
30
31 #include <drm/drm_file.h>
32 #include <drm/drm_modes.h>
33 #include <uapi/drm/drm.h>
34
35 struct drm_device;
36 struct drm_crtc;
37
38 /**
39  * struct drm_pending_vblank_event - pending vblank event tracking
40  */
41 struct drm_pending_vblank_event {
42         /**
43          * @base: Base structure for tracking pending DRM events.
44          */
45         struct drm_pending_event base;
46         /**
47          * @pipe: drm_crtc_index() of the &drm_crtc this event is for.
48          */
49         unsigned int pipe;
50         /**
51          * @sequence: frame event should be triggered at
52          */
53         u64 sequence;
54         /**
55          * @event: Actual event which will be sent to userspace.
56          */
57         union {
58                 /**
59                  * @event.base: DRM event base class.
60                  */
61                 struct drm_event base;
62
63                 /**
64                  * @event.vbl:
65                  *
66                  * Event payload for vblank events, requested through
67                  * either the MODE_PAGE_FLIP or MODE_ATOMIC IOCTL. Also
68                  * generated by the legacy WAIT_VBLANK IOCTL, but new userspace
69                  * should use MODE_QUEUE_SEQUENCE and &event.seq instead.
70                  */
71                 struct drm_event_vblank vbl;
72
73                 /**
74                  * @event.seq: Event payload for the MODE_QUEUEU_SEQUENCE IOCTL.
75                  */
76                 struct drm_event_crtc_sequence seq;
77         } event;
78 };
79
80 /**
81  * struct drm_vblank_crtc - vblank tracking for a CRTC
82  *
83  * This structure tracks the vblank state for one CRTC.
84  *
85  * Note that for historical reasons - the vblank handling code is still shared
86  * with legacy/non-kms drivers - this is a free-standing structure not directly
87  * connected to &struct drm_crtc. But all public interface functions are taking
88  * a &struct drm_crtc to hide this implementation detail.
89  */
90 struct drm_vblank_crtc {
91         /**
92          * @dev: Pointer to the &drm_device.
93          */
94         struct drm_device *dev;
95         /**
96          * @queue: Wait queue for vblank waiters.
97          */
98         wait_queue_head_t queue;        /**< VBLANK wait queue */
99         /**
100          * @disable_timer: Disable timer for the delayed vblank disabling
101          * hysteresis logic. Vblank disabling is controlled through the
102          * drm_vblank_offdelay module option and the setting of the
103          * &drm_device.max_vblank_count value.
104          */
105         struct timer_list disable_timer;
106
107         /**
108          * @seqlock: Protect vblank count and time.
109          */
110         seqlock_t seqlock;              /* protects vblank count and time */
111
112         /**
113          * @count: Current software vblank counter.
114          */
115         u64 count;
116         /**
117          * @time: Vblank timestamp corresponding to @count.
118          */
119         ktime_t time;
120
121         /**
122          * @refcount: Number of users/waiters of the vblank interrupt. Only when
123          * this refcount reaches 0 can the hardware interrupt be disabled using
124          * @disable_timer.
125          */
126         atomic_t refcount;              /* number of users of vblank interruptsper crtc */
127         /**
128          * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
129          */
130         u32 last;
131         /**
132          * @max_vblank_count:
133          *
134          * Maximum value of the vblank registers for this crtc. This value +1
135          * will result in a wrap-around of the vblank register. It is used
136          * by the vblank core to handle wrap-arounds.
137          *
138          * If set to zero the vblank core will try to guess the elapsed vblanks
139          * between times when the vblank interrupt is disabled through
140          * high-precision timestamps. That approach is suffering from small
141          * races and imprecision over longer time periods, hence exposing a
142          * hardware vblank counter is always recommended.
143          *
144          * This is the runtime configurable per-crtc maximum set through
145          * drm_crtc_set_max_vblank_count(). If this is used the driver
146          * must leave the device wide &drm_device.max_vblank_count at zero.
147          *
148          * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
149          */
150         u32 max_vblank_count;
151         /**
152          * @inmodeset: Tracks whether the vblank is disabled due to a modeset.
153          * For legacy driver bit 2 additionally tracks whether an additional
154          * temporary vblank reference has been acquired to paper over the
155          * hardware counter resetting/jumping. KMS drivers should instead just
156          * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly
157          * save and restore the vblank count.
158          */
159         unsigned int inmodeset;         /* Display driver is setting mode */
160         /**
161          * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this
162          * structure.
163          */
164         unsigned int pipe;
165         /**
166          * @framedur_ns: Frame/Field duration in ns, used by
167          * drm_calc_vbltimestamp_from_scanoutpos() and computed by
168          * drm_calc_timestamping_constants().
169          */
170         int framedur_ns;
171         /**
172          * @linedur_ns: Line duration in ns, used by
173          * drm_calc_vbltimestamp_from_scanoutpos() and computed by
174          * drm_calc_timestamping_constants().
175          */
176         int linedur_ns;
177
178         /**
179          * @hwmode:
180          *
181          * Cache of the current hardware display mode. Only valid when @enabled
182          * is set. This is used by helpers like
183          * drm_calc_vbltimestamp_from_scanoutpos(). We can't just access the
184          * hardware mode by e.g. looking at &drm_crtc_state.adjusted_mode,
185          * because that one is really hard to get from interrupt context.
186          */
187         struct drm_display_mode hwmode;
188
189         /**
190          * @enabled: Tracks the enabling state of the corresponding &drm_crtc to
191          * avoid double-disabling and hence corrupting saved state. Needed by
192          * drivers not using atomic KMS, since those might go through their CRTC
193          * disabling functions multiple times.
194          */
195         bool enabled;
196 };
197
198 int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs);
199 u64 drm_crtc_vblank_count(struct drm_crtc *crtc);
200 u64 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc,
201                                    ktime_t *vblanktime);
202 void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
203                                struct drm_pending_vblank_event *e);
204 void drm_crtc_arm_vblank_event(struct drm_crtc *crtc,
205                               struct drm_pending_vblank_event *e);
206 void drm_vblank_set_event(struct drm_pending_vblank_event *e,
207                           u64 *seq,
208                           ktime_t *now);
209 bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe);
210 bool drm_crtc_handle_vblank(struct drm_crtc *crtc);
211 int drm_crtc_vblank_get(struct drm_crtc *crtc);
212 void drm_crtc_vblank_put(struct drm_crtc *crtc);
213 void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe);
214 void drm_crtc_wait_one_vblank(struct drm_crtc *crtc);
215 void drm_crtc_vblank_off(struct drm_crtc *crtc);
216 void drm_crtc_vblank_reset(struct drm_crtc *crtc);
217 void drm_crtc_vblank_on(struct drm_crtc *crtc);
218 u64 drm_crtc_accurate_vblank_count(struct drm_crtc *crtc);
219 void drm_vblank_restore(struct drm_device *dev, unsigned int pipe);
220 void drm_crtc_vblank_restore(struct drm_crtc *crtc);
221
222 bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
223                                            unsigned int pipe, int *max_error,
224                                            ktime_t *vblank_time,
225                                            bool in_vblank_irq);
226 void drm_calc_timestamping_constants(struct drm_crtc *crtc,
227                                      const struct drm_display_mode *mode);
228 wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc);
229 void drm_crtc_set_max_vblank_count(struct drm_crtc *crtc,
230                                    u32 max_vblank_count);
231 #endif