GNU Linux-libre 4.19.264-gnu1
[releases.git] / sound / soc / sh / hac.c
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Hitachi Audio Controller (AC97) support for SH7760/SH7780
4 //
5 // Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
6 //
7 // dont forget to set IPSEL/OMSEL register bits (in your board code) to
8 // enable HAC output pins!
9
10 /* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
11  * the FIRST can be used since ASoC does not pass any information to the
12  * ac97_read/write() functions regarding WHICH unit to use.  You'll have
13  * to edit the code a bit to use the other AC97 unit.           --mlau
14  */
15
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/interrupt.h>
20 #include <linux/wait.h>
21 #include <linux/delay.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/ac97_codec.h>
25 #include <sound/initval.h>
26 #include <sound/soc.h>
27
28 /* regs and bits */
29 #define HACCR           0x08
30 #define HACCSAR         0x20
31 #define HACCSDR         0x24
32 #define HACPCML         0x28
33 #define HACPCMR         0x2C
34 #define HACTIER         0x50
35 #define HACTSR          0x54
36 #define HACRIER         0x58
37 #define HACRSR          0x5C
38 #define HACACR          0x60
39
40 #define CR_CR           (1 << 15)       /* "codec-ready" indicator */
41 #define CR_CDRT         (1 << 11)       /* cold reset */
42 #define CR_WMRT         (1 << 10)       /* warm reset */
43 #define CR_B9           (1 << 9)        /* the mysterious "bit 9" */
44 #define CR_ST           (1 << 5)        /* AC97 link start bit */
45
46 #define CSAR_RD         (1 << 19)       /* AC97 data read bit */
47 #define CSAR_WR         (0)
48
49 #define TSR_CMDAMT      (1 << 31)
50 #define TSR_CMDDMT      (1 << 30)
51
52 #define RSR_STARY       (1 << 22)
53 #define RSR_STDRY       (1 << 21)
54
55 #define ACR_DMARX16     (1 << 30)
56 #define ACR_DMATX16     (1 << 29)
57 #define ACR_TX12ATOM    (1 << 26)
58 #define ACR_DMARX20     ((1 << 24) | (1 << 22))
59 #define ACR_DMATX20     ((1 << 23) | (1 << 21))
60
61 #define CSDR_SHIFT      4
62 #define CSDR_MASK       (0xffff << CSDR_SHIFT)
63 #define CSAR_SHIFT      12
64 #define CSAR_MASK       (0x7f << CSAR_SHIFT)
65
66 #define AC97_WRITE_RETRY        1
67 #define AC97_READ_RETRY         5
68
69 /* manual-suggested AC97 codec access timeouts (us) */
70 #define TMO_E1  500     /* 21 < E1 < 1000 */
71 #define TMO_E2  13      /* 13 < E2 */
72 #define TMO_E3  21      /* 21 < E3 */
73 #define TMO_E4  500     /* 21 < E4 < 1000 */
74
75 struct hac_priv {
76         unsigned long mmio;     /* HAC base address */
77 } hac_cpu_data[] = {
78 #if defined(CONFIG_CPU_SUBTYPE_SH7760)
79         {
80                 .mmio   = 0xFE240000,
81         },
82         {
83                 .mmio   = 0xFE250000,
84         },
85 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
86         {
87                 .mmio   = 0xFFE40000,
88         },
89 #else
90 #error "Unsupported SuperH SoC"
91 #endif
92 };
93
94 #define HACREG(reg)     (*(unsigned long *)(hac->mmio + (reg)))
95
96 /*
97  * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
98  */
99 static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
100                               unsigned short *v)
101 {
102         unsigned int to1, to2, i;
103         unsigned short adr;
104
105         for (i = AC97_READ_RETRY; i; i--) {
106                 *v = 0;
107                 /* wait for HAC to receive something from the codec */
108                 for (to1 = TMO_E4;
109                      to1 && !(HACREG(HACRSR) & RSR_STARY);
110                      --to1)
111                         udelay(1);
112                 for (to2 = TMO_E4; 
113                      to2 && !(HACREG(HACRSR) & RSR_STDRY);
114                      --to2)
115                         udelay(1);
116
117                 if (!to1 && !to2)
118                         return 0;       /* codec comm is down */
119
120                 adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
121                 *v  = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
122
123                 HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
124
125                 if (r == adr)
126                         break;
127
128                 /* manual says: wait at least 21 usec before retrying */
129                 udelay(21);
130         }
131         HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
132         return i;
133 }
134
135 static unsigned short hac_read_codec_aux(struct hac_priv *hac,
136                                          unsigned short reg)
137 {
138         unsigned short val;
139         unsigned int i, to;
140
141         for (i = AC97_READ_RETRY; i; i--) {
142                 /* send_read_request */
143                 local_irq_disable();
144                 HACREG(HACTSR) &= ~(TSR_CMDAMT);
145                 HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
146                 local_irq_enable();
147
148                 for (to = TMO_E3;
149                      to && !(HACREG(HACTSR) & TSR_CMDAMT);
150                      --to)
151                         udelay(1);
152
153                 HACREG(HACTSR) &= ~TSR_CMDAMT;
154                 val = 0;
155                 if (hac_get_codec_data(hac, reg, &val) != 0)
156                         break;
157         }
158
159         return i ? val : ~0;
160 }
161
162 static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
163                            unsigned short val)
164 {
165         int unit_id = 0 /* ac97->private_data */;
166         struct hac_priv *hac = &hac_cpu_data[unit_id];
167         unsigned int i, to;
168         /* write_codec_aux */
169         for (i = AC97_WRITE_RETRY; i; i--) {
170                 /* send_write_request */
171                 local_irq_disable();
172                 HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
173                 HACREG(HACCSDR) = (val << CSDR_SHIFT);
174                 HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
175                 local_irq_enable();
176
177                 /* poll-wait for CMDAMT and CMDDMT */
178                 for (to = TMO_E1;
179                      to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
180                      --to)
181                         udelay(1);
182
183                 HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
184                 if (to)
185                         break;
186                 /* timeout, try again */
187         }
188 }
189
190 static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
191                                     unsigned short reg)
192 {
193         int unit_id = 0 /* ac97->private_data */;
194         struct hac_priv *hac = &hac_cpu_data[unit_id];
195         return hac_read_codec_aux(hac, reg);
196 }
197
198 static void hac_ac97_warmrst(struct snd_ac97 *ac97)
199 {
200         int unit_id = 0 /* ac97->private_data */;
201         struct hac_priv *hac = &hac_cpu_data[unit_id];
202         unsigned int tmo;
203
204         HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
205         msleep(10);
206         HACREG(HACCR) = CR_ST | CR_B9;
207         for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
208                 udelay(1);
209
210         if (!tmo)
211                 printk(KERN_INFO "hac: reset: AC97 link down!\n");
212         /* settings this bit lets us have a conversation with codec */
213         HACREG(HACACR) |= ACR_TX12ATOM;
214 }
215
216 static void hac_ac97_coldrst(struct snd_ac97 *ac97)
217 {
218         int unit_id = 0 /* ac97->private_data */;
219         struct hac_priv *hac;
220         hac = &hac_cpu_data[unit_id];
221
222         HACREG(HACCR) = 0;
223         HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
224         msleep(10);
225         hac_ac97_warmrst(ac97);
226 }
227
228 static struct snd_ac97_bus_ops hac_ac97_ops = {
229         .read   = hac_ac97_read,
230         .write  = hac_ac97_write,
231         .reset  = hac_ac97_coldrst,
232         .warm_reset = hac_ac97_warmrst,
233 };
234
235 static int hac_hw_params(struct snd_pcm_substream *substream,
236                          struct snd_pcm_hw_params *params,
237                          struct snd_soc_dai *dai)
238 {
239         struct hac_priv *hac = &hac_cpu_data[dai->id];
240         int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
241
242         switch (params->msbits) {
243         case 16:
244                 HACREG(HACACR) |= d ?  ACR_DMARX16 :  ACR_DMATX16;
245                 HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
246                 break;
247         case 20:
248                 HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
249                 HACREG(HACACR) |= d ?  ACR_DMARX20 :  ACR_DMATX20;
250                 break;
251         default:
252                 pr_debug("hac: invalid depth %d bit\n", params->msbits);
253                 return -EINVAL;
254                 break;
255         }
256
257         return 0;
258 }
259
260 #define AC97_RATES      \
261         SNDRV_PCM_RATE_8000_192000
262
263 #define AC97_FMTS       \
264         SNDRV_PCM_FMTBIT_S16_LE
265
266 static const struct snd_soc_dai_ops hac_dai_ops = {
267         .hw_params      = hac_hw_params,
268 };
269
270 static struct snd_soc_dai_driver sh4_hac_dai[] = {
271 {
272         .name                   = "hac-dai.0",
273         .bus_control            = true,
274         .playback = {
275                 .rates          = AC97_RATES,
276                 .formats        = AC97_FMTS,
277                 .channels_min   = 2,
278                 .channels_max   = 2,
279         },
280         .capture = {
281                 .rates          = AC97_RATES,
282                 .formats        = AC97_FMTS,
283                 .channels_min   = 2,
284                 .channels_max   = 2,
285         },
286         .ops = &hac_dai_ops,
287 },
288 #ifdef CONFIG_CPU_SUBTYPE_SH7760
289 {
290         .name                   = "hac-dai.1",
291         .id                     = 1,
292         .playback = {
293                 .rates          = AC97_RATES,
294                 .formats        = AC97_FMTS,
295                 .channels_min   = 2,
296                 .channels_max   = 2,
297         },
298         .capture = {
299                 .rates          = AC97_RATES,
300                 .formats        = AC97_FMTS,
301                 .channels_min   = 2,
302                 .channels_max   = 2,
303         },
304         .ops = &hac_dai_ops,
305
306 },
307 #endif
308 };
309
310 static const struct snd_soc_component_driver sh4_hac_component = {
311         .name           = "sh4-hac",
312 };
313
314 static int hac_soc_platform_probe(struct platform_device *pdev)
315 {
316         int ret;
317
318         ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
319         if (ret != 0)
320                 return ret;
321
322         return snd_soc_register_component(&pdev->dev, &sh4_hac_component,
323                                           sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
324 }
325
326 static int hac_soc_platform_remove(struct platform_device *pdev)
327 {
328         snd_soc_unregister_component(&pdev->dev);
329         snd_soc_set_ac97_ops(NULL);
330         return 0;
331 }
332
333 static struct platform_driver hac_pcm_driver = {
334         .driver = {
335                         .name = "hac-pcm-audio",
336         },
337
338         .probe = hac_soc_platform_probe,
339         .remove = hac_soc_platform_remove,
340 };
341
342 module_platform_driver(hac_pcm_driver);
343
344 MODULE_LICENSE("GPL v2");
345 MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
346 MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");